{"title":"Engine Components","description":"","products":[{"product_id":"n75-race-valve","title":"N75 Race Valve EBCS Wastegate Solenoid Valve Upgrade Kit (Pierburg)","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai and Kia turbocharged cars that use an electronic boost control solenoid (EBCS). It fits the older Kia Forte Turbo but not the newer Kia Forte GT. It can also be used with aftermarket electronic boost controllers and on other brands of car through the Vehicle option.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAn EBCS, or electronic boost control solenoid, controls how your turbo builds and holds boost; it is also called a wastegate solenoid. The N75 Race Valve replaces the car's factory solenoid with a German-made Pierburg valve, pre-mounted on an aluminum bracket, together with a wiring-harness conversion that plugs into your car's existing connector. It is a boost-control upgrade for cars running higher than stock boost.\u003c\/p\u003e\n\u003cp\u003eThe valve handles up to 25 psi, and we have run it at that level over a long period in our own testing. As of the end of 2024 it had been in use and sold for five years, and we have built the kit around the same Pierburg valve since we launched it and have not changed it. Owners report smoother, more consistent power delivery across the rev range, sharper throttle response, and that it holds boost well; it is often mentioned as a sensible early modification.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Screenshot_20210918-190736_Facebook_1024x1024-1.jpg?v=1633067732\" alt=\"N75 Race Valve EBCS: black Pierburg electronic boost control solenoid shown with a High Boost stamp graphic\" loading=\"lazy\" width=\"1000\" height=\"842\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe valve in this kit is the design VAG arrived at after many revisions: a Pierburg valve used by VAG on the older TT, mounted on the compressor side of the turbo housing on the 2.0T GTI.\u003c\/p\u003e\n\u003cp\u003eNot every valve that carries the Pierburg name is the same part, because Pierburg makes many boost-control solenoids, which is why we specify this exact valve.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHandles up to 25 psi\u003c\/li\u003e\n\u003cli\u003eOne Pierburg valve, pre-mounted on an aluminum bracket\u003c\/li\u003e\n\u003cli\u003eOne wiring-harness conversion that plugs into your car's existing connector\u003c\/li\u003e\n\u003cli\u003eTwo premium hoses; the fit is tight, so zip ties are added as a safety\u003c\/li\u003e\n\u003cli\u003eA set of zip ties\u003c\/li\u003e\n\u003cli\u003eMade in Canada; developed in Canada and Australia; the valve is made in Germany\u003c\/li\u003e\n\u003cli\u003eOEM-style hose kits are available by special order; email info@n75motorsports.ca to order one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20210916_184957.jpg?v=1631832831\" alt=\"Full N75 Race Valve EBCS kit laid out: Pierburg valve, wiring-harness conversion, two hoses and zip ties\" loading=\"lazy\" width=\"3018\" height=\"2066\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Kit:\u003c\/strong\u003e New Hoses - Zip Ties (Easy Installation), listed as New Hoses - Zip Tie (Easy Installation) with the WITHOUT BRACKET vehicle: new hoses and zip ties for easy installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e choose the entry that matches your car. ALL Applicable Hyundai\/Kia; ALL Other JDM Brands (AEM \/ GFB Electric boost control upgrade); ALL VAG Applications (Specify connector in order notes), with your connector put in the order notes; or ALL Hyundai Kia Vehicle's with EBCS (WITHOUT BRACKET), the valve and harness only, without the aluminum bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePlug the wiring-harness conversion into your car's existing connector.\u003c\/li\u003e\n\u003cli\u003eConnect the hoses to the correct ports; the included diagram labels which port goes to the wastegate and which goes to the turbo.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe premium hoses are a tight fit, and the zip ties are added as a safety. A picture install diagram is included in the product gallery. For product or fitment questions, email info@n75motorsports.ca.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Untitled.jpg?v=1617856268\" alt=\"N75 Race Valve on its red aluminum bracket with the Wastegate and Turbo ports labelled\" loading=\"lazy\" width=\"925\" height=\"766\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ebcs_b9a15d27-6fec-45bd-8700-0830d134334b.jpg?v=1633067732\" alt=\"N75 Race Valve installed in the engine bay on its red bracket, with hoses and loom connected\" loading=\"lazy\" width=\"1080\" height=\"1055\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is an EBCS and what does this kit do?\u003c\/h3\u003e\n\u003cp\u003eAn EBCS is the electronic boost control solenoid that controls how your turbo builds and holds boost. This kit replaces the factory solenoid with a German-made Pierburg valve on an aluminum bracket and a wiring-harness conversion.\u003c\/p\u003e\n\u003ch3\u003eHow much boost can it handle?\u003c\/h3\u003e\n\u003cp\u003eUp to 25 psi. We have run it at that level over a long period in our own testing.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt fits Hyundai and Kia turbo cars with an EBCS, including the older Kia Forte Turbo but not the newer Kia Forte GT. Choose the Vehicle option that matches your car; VAG buyers note their connector in the order notes. If you are unsure, email info@n75motorsports.ca.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with an aftermarket electronic boost controller?\u003c\/h3\u003e\n\u003cp\u003eYes. The JDM and VAG entries in the Vehicle option cover an aftermarket electronic boost controller and other brands of car.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"New Hoses - Zip Ties (Easy Installation) \/ ALL Applicable Hyundai\/Kia","offer_id":39386948763834,"sku":"13-320","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"New Hoses - Zip Ties (Easy Installation) \/ ALL Other JDM Brands (AEM \/ GFB Electric boost control upgrade)","offer_id":41563525972154,"sku":"","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"New Hoses - Zip Ties (Easy Installation) \/ ALL VAG Applications (Specify connector in order notes)","offer_id":41563526004922,"sku":"","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"New Hoses - Zip Tie (Easy Installation) \/ ALL Hyundai Kia Vehicle's with EBCS (WITHOUT BRACKET)","offer_id":41929073655994,"sku":"","price":227.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Screenshot_20210918-190736_Facebook_1024x1024-1.jpg?v=1633067732"},{"product_id":"oil-change-kit","title":"Oil Change Kit in a Box 5w40 Motul X-cess Gen2  \/ WIX XP","description":"\u003cp\u003e\u003cstrong\u003eAlways In Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e The Hyundai and Kia 1.6T Gamma engine found in the N Line, Elantra Sport, Tucson, Veloster and various Kia models.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eEverything you need for an oil change on the 1.6T Gamma engine, in one box: a 1x5L Jug of Motul X-cess Gen2 5w40 and a WIX XP oil filter. Motul X-cess Gen 2 is the new standard for turbocharged GDI engines, and 5w40 is recommended by Hyundai.\u003c\/p\u003e\n\u003cp\u003eWe also decided to go with a WIX XP oil filter. The OEM Hyundai one is a good filter no doubt, but we weighed both filters and cut them apart: the WIX XP is a much thicker filter and is significantly heavier, which proves it's built tough. The WIX XP filter is also made to OEM spec, meaning it has an anti drain back valve so we do not lose oil pressure on cold start. The Hyundai OEM filter costs us less money; if we thought it was a better filter we would include it with this kit, however we believe this is the best filter for our platform.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/CollageMaker_20201107_144808779.jpg?v=1604778558\" alt=\"Motul 8100 X-cess gen2 5W-40 5 litre jug and WIX XP oil filter, the two parts of the oil change kit\" loading=\"lazy\" width=\"4096\" height=\"4096\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe kit includes a 1x5L Jug of Motul X-cess Gen2 5w40 and 1x WIX XP Oil Filter. The 5L jug is more than enough to do an oil change: you will be left with .5 to .75 of a L. These are spill proof bottles, even after reopening, so it is the perfect amount to keep in the trunk for a rainy day when you forget to do an oil change and your oil level has dropped a little.\u003c\/p\u003e\n\u003cp\u003eThe WIX XP is an OE replacement, spin-on lube filter made to OEM spec, with an anti drain back valve so the engine does not lose oil pressure on cold start.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x5L Jug of Motul X-cess Gen2 5w40, the new standard for turbocharged GDI engines\u003c\/li\u003e\n\u003cli\u003eMore than enough for one oil change, with .5 to .75 of a L left over\u003c\/li\u003e\n\u003cli\u003eSpill proof bottle, even after reopening\u003c\/li\u003e\n\u003cli\u003e1x WIX XP Oil Filter: much thicker and significantly heavier than the OEM Hyundai filter, made to OEM spec with an anti drain back valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWIX XP oil filter specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOE Replacement Oil Filter\u003c\/li\u003e\n\u003cli\u003eStyle: Spin-On Lube Filter\u003c\/li\u003e\n\u003cli\u003eClass: A\u003c\/li\u003e\n\u003cli\u003eDuty Type: LD\u003c\/li\u003e\n\u003cli\u003eHeight: 3.24\"\u003c\/li\u003e\n\u003cli\u003eInner Diameter Top: Closed\u003c\/li\u003e\n\u003cli\u003eMedia Type: Enhanced Cellulose\u003c\/li\u003e\n\u003cli\u003eMicron: 19 Micron\u003c\/li\u003e\n\u003cli\u003eOuter Diameter Top: 3.15\"\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: 280 PSI\u003c\/li\u003e\n\u003cli\u003eBeta Ratio: 2\/20 - 6\/20\u003c\/li\u003e\n\u003cli\u003eBy-Pass Valve Setting: 8-11\u003c\/li\u003e\n\u003cli\u003eFlow Rate: 9-11 GPM\u003c\/li\u003e\n\u003cli\u003eThread Size: 20 x 1.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wix_8f4a35e2-5480-4e65-bf0d-f38591191ecb.jpg?v=1604778558\" alt=\"WIX XP spin-on oil filter\" loading=\"lazy\" width=\"1080\" height=\"1229\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd N75 Magnetic Oil Drain Plug:\u003c\/strong\u003e No or Yes. Choose Yes to add an N75 magnetic oil drain plug to the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eUse the kit for an oil change on the 1.6T Gamma engine: one WIX XP filter and the 5L jug of Motul X-cess Gen2 5w40, which is more than enough to do an oil change. Keep the .5 to .75 of a L left over in the spill proof jug in your trunk, for a rainy day when you forget to do an oil change and your oil level has dropped a little.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201106_172659_8655726c-68e1-49ba-bb62-ddfaa328ca70.jpg?v=1604778558\" alt=\"Motul 8100 X-cess gen2 5W-40 engine oil, 5 litre jug, front label\" loading=\"lazy\" width=\"1080\" height=\"1340\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is in the kit?\u003c\/h3\u003e\n\u003cp\u003eA 1x5L Jug of Motul X-cess Gen2 5w40 and 1x WIX XP Oil Filter. Choose Yes on the option to add an N75 magnetic oil drain plug.\u003c\/p\u003e\n\u003ch3\u003eWhich engine is it for?\u003c\/h3\u003e\n\u003cp\u003eThe 1.6T Gamma engine found in the N Line, Elantra Sport, Tucson, Veloster and various Kia models.\u003c\/p\u003e\n\u003ch3\u003eWhy a WIX XP filter instead of the Hyundai OEM filter?\u003c\/h3\u003e\n\u003cp\u003eWe weighed both filters and cut them apart. The WIX XP is a much thicker filter, significantly heavier, and made to OEM spec with an anti drain back valve. The OEM filter costs us less money, but we believe the WIX XP is the best filter for our platform.\u003c\/p\u003e\n\u003ch3\u003eWill I have oil left over?\u003c\/h3\u003e\n\u003cp\u003eYes. The 5L jug is more than enough to do an oil change, and you will be left with .5 to .75 of a L to keep in the trunk.\u003c\/p\u003e","brand":"Motul Wix","offers":[{"title":"No","offer_id":44424955691194,"sku":"K-1","price":105.0,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":44424955723962,"sku":"K-2","price":125.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/CollageMaker_20201107_144808779.jpg?v=1604778558"},{"product_id":"hot-pipe-resonator-delete","title":"Hot Pipe Resonator Delete","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.6T turbo vehicles before 2021: the Veloster Turbo (VT1 and VT2), the 1.6T Elantra GT (GT Sport) and Kona 1.6T. It does not fit the Kia Forte GT.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA resonator delete for the 1.6T hot pipe, the charge pipe that feeds the intercooler. It replaces the factory resonator section, the part with the internal braided-mesh resonator band, with a smooth metal pipe. We make it in Canada; N75 Motorsports is dedicated to Canadian development and manufacturing.\u003c\/p\u003e\n\u003cp\u003eA resonator delete is a popular mod among Hyundai and Kia owners. We make no power claims for this part. Owners report good build quality, a change in sound, and quick, well-packed delivery. One owner with a 2018 Elantra Sport reports the car sounds the way they wanted after adding this delete alongside a muffler delete and a downpipe.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/received_1024434588052005.jpg?v=1619744734\" alt=\"Factory 1.6T hot pipe resonator section with its braided-mesh band next to the smooth N75 metal resonator delete pipe on a workbench\" loading=\"lazy\" width=\"960\" height=\"720\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe delete is a metal pipe that replaces the factory resonator section in the hot pipe. We roll the bead three times to form a large retaining lip at the end of the pipe. The large lip lets you reuse the OEM hose clamps and resists the delete popping off under boost, which is why T-clamps are not required.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMade in Canada by N75 Motorsports\u003c\/li\u003e\n\u003cli\u003eMetal delete pipe that replaces the factory resonator section in the hot pipe\u003c\/li\u003e\n\u003cli\u003eTriple-rolled bead forming a large retaining lip\u003c\/li\u003e\n\u003cli\u003eDesigned to reuse the OEM hose clamps\u003c\/li\u003e\n\u003cli\u003eT-clamps optional for the most secure hold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/1619744628836.jpg?v=1619744734\" alt=\"Close-up of the triple-rolled bead lip at the end of an N75 metal resonator delete pipe, with more delete pipes behind it\" loading=\"lazy\" width=\"3024\" height=\"3024\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eRemove the factory resonator section from the hot pipe and fit the delete pipe in its place, then clamp each end. Reuse the OEM clamps, or fit new hose clamps, since the OEM clamps are not always reusable. T-clamps give the most secure hold if you want extra certainty; they are available locally almost anywhere. A little hairspray on the pipe before fitting helps the rubber hose grip the metal. The delete pipe is supplied on its own, without clamps.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes it come with clamps?\u003c\/h3\u003e\n\u003cp\u003eNo, the delete pipe only. Reuse your OEM clamps or fit new hose clamps; T-clamps are optional.\u003c\/p\u003e\n\u003ch3\u003eWill it blow off under boost?\u003c\/h3\u003e\n\u003cp\u003eThe triple-rolled bead forms a large lip, so the OEM clamps hold the delete in place. T-clamps give the most secure hold if you want extra certainty.\u003c\/p\u003e\n\u003ch3\u003eDoes it add power?\u003c\/h3\u003e\n\u003cp\u003eWe make no power claims for the resonator delete.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt fits 1.6T turbo vehicles before 2021: the Veloster Turbo (VT1 and VT2), the 1.6T Elantra GT (GT Sport) and Kona 1.6T. It does not fit the Kia Forte GT.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"Default Title","offer_id":31524255694871,"sku":"2400","price":45.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/received_1024434588052005.jpg?v=1619744734"},{"product_id":"mach-2-tms-recirculating-valve-for-hyundai-kia-1-6-t-gdi-direct-fitment","title":"MACH 2 TMS RECIRCULATING VALVE1.6 T-GDI DIRECT FITMENT","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.4TGDI and 1.6TGDI: Hyundai Elantra GT Sport 2018, Hyundai Elantra GT N Line 2019-2020, Hyundai Elantra Sport 2017-2020, Hyundai Veloster Turbo 2019-2021, Kia Forte GT 2020-CUR, Kia Forte5 2020-CUR and Hyundai i30 Models 1.4T\/1.6T. GFB's own application list for this valve also includes the Hyundai Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), Tucson 1.6 GDI Turbo (facelift) 2019-2020 and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAll the performance with or without the noise! The GFB Mach 2 is a TMS recirculating valve, direct fitment for the Hyundai and Kia 1.6 T-GDI. GFB's Mach 2 utilises GFB's proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce.\u003c\/p\u003e\n\u003cp\u003eWith its single venting outlet, the Mach 2 is configured from the factory for full recirculation (i.e. plumb back, diverter, bypass) venting for the performance-minded who just want the benefits without the sound.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9111.jpg?v=1590729846\" alt=\"GFB Mach 2 recirculating diverter valve for the Hyundai and Kia 1.6T, black body with silver outlet and brass vacuum fitting\" loading=\"lazy\" width=\"1600\" height=\"1466\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Mach 2 has a single venting outlet and is factory configured for full recirculating operation, as a direct factory replacement. GFB's TMS Technology gives up to 30% faster boost recovery on gearshift, and the valve can be configured for full atmosphere venting with a separate atmosphere conversion kit.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSingle venting outlet, factory configured for full recirculating operation\u003c\/li\u003e\n\u003cli\u003eConfigure for full atmosphere venting with separate atmosphere conversion kit\u003c\/li\u003e\n\u003cli\u003eTMS Technology for up to 30% faster boost recovery on gearshift\u003c\/li\u003e\n\u003cli\u003eHuge range of direct bolt-on kits\u003c\/li\u003e\n\u003cli\u003e100psi+ boost holding ability\u003c\/li\u003e\n\u003cli\u003eManufactured in Australia \u003ca href=\"https:\/\/www.gfbuk.com\/iso-9001.accreditation.cfm\"\u003ein accordance with ISO 9001\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Pierburg BOV Solenoid:\u003c\/strong\u003e No (the GFB valve on its own) or Yes (the valve with a Pierburg BOV solenoid added).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eA direct fitment in the factory location. GFB's instructions: remove the airbox for access, take the recirc hose off the factory diverter valve, remove the factory valve (4 screws, 10mm socket), check the brown o-ring is in the groove on the underside of the Mach 2, install it in the factory location with the supplied longer screws and 5mm hex key, then refit the recirc and vacuum hoses and the airbox. GFB says that because the Mach 2 is fully recirculated and these cars have no MAF sensor, the spring pre-load adjustment is not critical and the valve can be used straight out of the box. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGo Fast Bits gives the original owner a limited lifetime warranty against defective materials or faulty workmanship, once the product is registered on GFB's website. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003e1.4TGDI and 1.6TGDI: the Hyundai Elantra GT Sport 2018, Elantra GT N Line 2019-2020, Elantra Sport 2017-2020, Veloster Turbo 2019-2021, Kia Forte GT 2020-CUR, Kia Forte5 2020-CUR and Hyundai i30 Models 1.4T\/1.6T. GFB also lists the Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), Tucson 1.6 GDI Turbo (facelift) 2019-2020 and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch3\u003eIs it loud?\u003c\/h3\u003e\n\u003cp\u003eNo. It is factory configured for full recirculation, for the benefits without the sound. You can configure it for full atmosphere venting with a separate atmosphere conversion kit.\u003c\/p\u003e\n\u003ch3\u003eHow much boost can it hold?\u003c\/h3\u003e\n\u003cp\u003e100psi+. Put simply, it can hold more boost than any turbo could produce.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eYes, FREE SHIPPING.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"No","offer_id":37387351294138,"sku":"T9111","price":229.99,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":37387351261370,"sku":"","price":359.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9111.jpg?v=1590729846"},{"product_id":"hybrid-dual-outlet-valve-3-valves-in-one-diverter-valve-bov","title":"1.6T Hybrid Dual Outlet Valve 1.6T (3 Valves in one)","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra Sport 2017-2020, Hyundai Elantra GT Sport 2018, Hyundai Elantra GT N Line 2019-2020, Hyundai Veloster Turbo 2 2019-2020, Hyundai Kona, Kia Forte GT 2020-current and Kia Forte5, with the 1.4GDI and 1.6TGDI engines. GFB lists this valve for the Hyundai Elantra Sport 1.6 T-GDI 2016-2020, Elantra GT 1.6 T-GDI 2016-2020, Veloster 1.6 GDI Turbo 2019-on, Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), i30 SR\/N-Line Hatch 1.6T-GDI (PD, 2016-on) and Tucson 1.6 GDI Turbo (facelift) 2019-2020, and the Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe GFB Hybrid dual outlet diverter valve \/ BOV: 3 valves in one, because it can be configured for full recirc, full atmosphere, or 50\/50 venting. GFB brought the Hybrid back to celebrate 20 years since the world's first dual outlet blow-off valve.\u003c\/p\u003e\n\u003cp\u003eIn a time before Justin Bieber, Y2K, and even Google, the year is 1998 and GFB's founding engineer John Adrian is so sick of his new WRX stalling with an atmosphere-venting BOV that he decided he didn't want to live in a world any longer without a dual port BOV... so he invented it! Known as the \"Hybrid\", this world-first became the flagship model of the newly formed company Go Fast Bits. Grab a piece of history for your car now.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9211_web.jpg?v=1590730264\" alt=\"GFB Hybrid dual outlet diverter valve for the Hyundai and Kia 1.6T, with aluminium recirculation outlet, black trumpet and two blanking plugs\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe two venting ports of the original Hybrid were staged on the body so that the recirc port opened before the atmo port, helping to prevent backfiring and stalling on cars with a MAF sensor, whilst still giving the signature blow off sound when the car is driven harder. The new Hybrid has the same staged venting outlets as the original, but now with the ability to configure for full recirc, full atmosphere, or 50\/50 venting, and a huge range of direct bolt-on kits for popular vehicles: all the benefits of dual port venting, at an affordable price.\u003c\/p\u003e\n\u003cp\u003eThis innovation was so successful that the technology has since been adopted by almost every other BOV brand on the market. The Hybrid then went on to evolve into GFB's next world-first, the venting bias adjustable BOV now known as the Respons TMS, and then into the electronically adjustable version, the Deceptor Pro. With the spotlight on those products the Hybrid was absent from the market for some time, and GFB brought it back in celebration of the 20 years since the invention of one of the most influential BOVs the turbo world has seen. As a fitting birthday present, the importance of the dual-port venting system and the new Hybrid valve was recognized from a field of 3000 entries by a panel of international judges and presented with a Global Media Award at the 2017 SEMA show.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 valves in one, diverter valve\/BOV: configure for full recirc, full atmosphere, or 50\/50 venting\u003c\/li\u003e\n\u003cli\u003eStaged venting outlets: the recirc port opens before the atmo port, helping to prevent backfiring and stalling on cars with a MAF sensor\u003c\/li\u003e\n\u003cli\u003eSignature blow off sound when the car is driven harder\u003c\/li\u003e\n\u003cli\u003ePart of GFB's huge range of direct bolt-on Hybrid kits for popular vehicles\u003c\/li\u003e\n\u003cli\u003eGlobal Media Award at the 2017 SEMA show, chosen from a field of 3000 entries by a panel of international judges\u003c\/li\u003e\n\u003cli\u003eCelebrates 20 years since GFB invented the world's first dual outlet blow-off valve in 1998\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Pierburg BOV Solenoid:\u003c\/strong\u003e No is the Hybrid valve only. Yes adds a Pierburg BOV solenoid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eGFB's own vehicle list for this valve is on GFB's website. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGFB (Go Fast Bits) gives the original owner a limited lifetime warranty against defective materials or faulty workmanship; register the product on GFB's website to activate it. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Elantra GT N Line 2019-2020, Veloster Turbo 2 2019-2020 and Kona, and the Kia Forte GT 2020-current and Forte5, with the 1.4GDI and 1.6TGDI engines.\u003c\/p\u003e\n\u003ch3\u003eWhat does 3 valves in one mean?\u003c\/h3\u003e\n\u003cp\u003eThe Hybrid can be configured for full recirc, full atmosphere, or 50\/50 venting.\u003c\/p\u003e\n\u003ch3\u003eWill it make my car stall?\u003c\/h3\u003e\n\u003cp\u003eThe recirc port opens before the atmo port, which helps to prevent backfiring and stalling on cars with a MAF sensor, whilst still giving the signature blow off sound when the car is driven harder.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eFREE SHIPPING to Canada and US.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"No","offer_id":37387360501946,"sku":"T9211","price":269.99,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":37387360469178,"sku":"","price":389.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9211_web.jpg?v=1590730264"},{"product_id":"gfb-bov-t9011-adjustable-bov","title":"1.6T Adjustable BOV","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.4T GDI and 1.6T GDI: Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Veloster Turbo 2 2019-2020, Elantra GT N Line 2019-2020 and Kia Forte GT 2020-CUR. GFB's own application list also includes the Hyundai Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), Tucson 1.6 GDI Turbo (facelift) 2019-2020, i30 SR\/N-Line Hatch 1.6T-GDI (PD, 2016-on) and Kia Cerato 1.6 T-GDI 2018-on. Note: this product has fitment notes for some models. \u003ca href=\"https:\/\/gfb.com.au\/products\/blow-off-and-diverter-valves\/respons-tms\/respons-tms-direct-fit-blow-off-valve-or-bov-patented-adjustable-venting-bias-system-diverter-valve\/#tab-vehicle_information\"\u003eClick Here\u003c\/a\u003e for more information.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe GFB Respons TMS is a direct fit blow off valve (BOV) and diverter valve with GFB's patented adjustable venting bias system, for the cars above. GFB's Sound Adjustment System lets you infinitely vary how much air is recirculated or vented to atmosphere, like a volume control: simply by twisting the adjustment ring, you can change the sound of your BOV from silent to ear-shattering, or anywhere in between.\u003c\/p\u003e\n\u003cp\u003eGFB says it is a true bolt-on: everything you need is included, it fits directly in the factory location (not on a separate adaptor), and no modifications to the car are required.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9011_web.jpg?v=1590730729\" alt=\"GFB Respons TMS blow-off valve for the Hyundai and Kia 1.6T, black body with silver inlet, brass vacuum fitting and black trumpet\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Respons has two venting outlets: recirc, and a trumpet that vents to atmosphere. Twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed. This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between. Fully anti-clockwise is 100% recirculation venting, the same as the stock valve and the quietest setting; fully clockwise opens the trumpet port for the loudest sound.\u003c\/p\u003e\n\u003cp\u003eIt works on GFB's TMS (Turbo Management System) principle: a factory bypass valve is open until required to shut, while a GFB TMS valve is shut until required to open, so it only vents when required, and only enough air to prevent compressor surge. GFB's tests show the Respons can return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears. Its balanced piston design uses boost pressure on either side to cancel out the forces, so high boost cannot force it open.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGFB Respons TMS for Hyundai and Kia 1.6T GDI applications\u003c\/li\u003e\n\u003cli\u003ePatented adjustable venting bias system: from 100% recirc (silent) to 100% atmosphere (loud), or anywhere in between\u003c\/li\u003e\n\u003cli\u003eChange the sound simply by twisting the adjustment ring\u003c\/li\u003e\n\u003cli\u003eTMS (Turbo Management System): up to 30% faster return to peak boost on gearshift in GFB's tests\u003c\/li\u003e\n\u003cli\u003eBalanced piston design: holds unlimited boost pressure\u003c\/li\u003e\n\u003cli\u003eDirect fit: bolts into the factory location with everything you need included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Respons-640.gif?v=1592193253\" alt=\"Hand holding the black trumpet of a GFB Respons valve\" loading=\"lazy\" width=\"640\" height=\"480\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Pierburg BOV Solenoid:\u003c\/strong\u003e No (the GFB valve on its own) or Yes (the valve with a Pierburg BOV solenoid added).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eGFB's instructions: remove the airbox for access, take the recirc hose off the factory diverter valve, then remove the factory valve (4 screws, 10mm socket). Check the brown o-ring is in the groove on the underside of the Respons, install it in the factory location with the supplied longer screws and 5mm hex key, refit the recirc and vacuum hoses and their clamps, and reinstall the airbox. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003eHyundai uses an ECU-controlled solenoid valve to switch the top port of the BOV from boost to vacuum when it requires it to open, so the ECU largely decides when the valve vents. GFB notes it may appear to vent at odd times, or not at all at low load, and that this is normal. The spring pre-load screw in the centre of the cap sets how easily it blows off and how long the sound lasts.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGo Fast Bits gives the original owner a limited lifetime warranty against defective materials or faulty workmanship, once the product is registered on GFB's website. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003e1.4T GDI and 1.6T GDI: the Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Veloster Turbo 2 2019-2020, Elantra GT N Line 2019-2020 and Kia Forte GT 2020-CUR. GFB also lists the Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), Tucson 1.6 GDI Turbo (facelift) 2019-2020, i30 SR\/N-Line Hatch 1.6T-GDI and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch3\u003eCan I make it quiet or loud?\u003c\/h3\u003e\n\u003cp\u003eYes. Twist the adjustment ring: fully anti-clockwise is 100% recirc, the same as the stock valve; fully clockwise is 100% atmosphere for the loudest sound; anywhere in between is possible.\u003c\/p\u003e\n\u003ch3\u003eWill venting to atmosphere cause stalling or backfiring?\u003c\/h3\u003e\n\u003cp\u003eGFB says there is no MAF sensor on these cars, so the ECU is completely unaffected by atmosphere venting or spring pre-load.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eFREE SHIPPING to Canada and US.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"No","offer_id":37387368464570,"sku":"T9011","price":349.99,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":37387368431802,"sku":"","price":459.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9011_web.jpg?v=1590730729"},{"product_id":"powerflex-lower-engine-mount-bushing-performance","title":"Powerflex Lower Engine Mount Bushing (Purple or Black)","description":"\u003cp\u003e\u003cstrong\u003ePURPLE IN STOCK \/ BLACK IN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN Day Sale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYellow: we no longer sell it, as we cannot stand behind this product (not recommended).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Turbo Hyundai models, 1.6T \/ 2.0T, including the I30N. Lower engine mount bushing.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003ePowerflex's lower engine mount bushing in two versions: Performance (Purple) and Race (Black). In our opinion these bushings are arguably the best mod and a must for all turbo Hyundais, 1.6T \/ 2.0T.\u003c\/p\u003e\n\u003cp\u003eThe Performance bushing is the one you want if you want the perfect mix of low vibration and engine movement: see the chart below. The Race bushing (Black) is a track geared upgrade, as stiff as possible, and vibration will be present.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/msedge_8LoOhA9Akf.png?v=1712363463\" alt=\"Aluminium lower engine mount with a purple Powerflex polyurethane bushing fitted in the large end\" loading=\"lazy\" width=\"850\" height=\"428\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003ePowerflex's bushing for the I30N replaces the original rubber bushing for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response, with reduced wheel hop and a more direct transition of power to the road.\u003c\/p\u003e\n\u003cp\u003ePowerflex rates the Performance (Purple) bushing at Shore A 80, a stiffer option for higher-powered cars that may be used on track, and the Race (Black) bushing at Shore A 95, its Black Series part for extreme track and motorsport use. Powerflex notes that stiffer materials reduce engine movement but usually transmit more noise and vibration.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the original rubber bushing in the lower engine mount\u003c\/li\u003e\n\u003cli\u003eIncreased engine stability under acceleration\u003c\/li\u003e\n\u003cli\u003eBoosts the torque reaction of the mount for improved acceleration response\u003c\/li\u003e\n\u003cli\u003eReduced wheel hop and a more direct transition of power to the road\u003c\/li\u003e\n\u003cli\u003ePerformance (Purple): Shore A 80; the perfect mix of low vibration and engine movement\u003c\/li\u003e\n\u003cli\u003eRace (Black): Shore A 95; a track geared upgrade, as stiff as possible, vibration will be present\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/powerflex_1080x_0c424ba0-fb1f-46f3-85b7-64366f04b311.jpg?v=1712363462\" alt=\"Powerflex load versus displacement chart comparing the original bush with Yellow 70, Purple 80 and Black 95 polyurethane\" loading=\"lazy\" width=\"1080\" height=\"588\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Performance (Purple); or Race (Black). Purple in stock; black in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe yellow is the 'street' bushing, made to produce no vibration at all while being as stiff as possible without the vibration. Due to issues with this product we no longer sell it.\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe bushing replaces the original rubber bushing in the lower engine mount. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_N5YI5SWXSD_74721365-8ecf-4da1-ab08-f8c4975cd4b4.png?v=1712363462\" alt=\"Shore hardness chart placing PowerFlex Yellow (Street), Purple (Street\/Performance) and Black (Race) between rubber and plastic\" loading=\"lazy\" width=\"670\" height=\"412\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003ePowerflex gives a lifetime warranty on the Performance (Purple) bushing for the original purchaser buying through an authorised distributor, limited to replacement of the supplied part; parts used for track or competition are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003ePurple or Black: which should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe Performance (Purple) bushing is the one you want for the perfect mix of low vibration and engine movement. The Race (Black) bushing is a track geared upgrade, as stiff as possible, and vibration will be present.\u003c\/p\u003e\n\u003ch3\u003eDo you still sell the yellow bushing?\u003c\/h3\u003e\n\u003cp\u003eNo. Due to issues with this product we no longer sell it; we cannot stand behind it and do not recommend it.\u003c\/p\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eTurbo Hyundai models, 1.6T \/ 2.0T, including the I30N.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Performance (Purple)","offer_id":37740964184250,"sku":"P120P","price":70.0,"currency_code":"CAD","in_stock":true},{"title":"Race (Black)","offer_id":42979294806202,"sku":"PFF26-120BLK","price":75.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/msedge_8LoOhA9Akf.png?v=1712363463"},{"product_id":"motul-x-cess-5w40-engine-oil","title":"X-cess Gen 2 5w40 Engine Oil","description":"\u003cp\u003e\u003cstrong\u003eItem In Stock at all times, Always on-hand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe have Motul X-Cess Gen 2, Motul Sport, and Liqui Moly Molygen in 5w40 in stock at all times.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: engines that call for a 5W40 oil approved to BMW LL-01 (all model years, including 2019 and newer), MB 229.5\/226.5, Porsche A40 or VW 502 00 \/ 505 00. Motul 8100 X-cess gen2 5W-40 (5L jug).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eMotul 8100 X-cess 5W40 GEN2 is the updated, \"GEN2\" version of 8100 X-cess, with many benefits over the standard X-cess Gen 1. It meets the standards for the BMW LL-01 approval for all vehicles, including 2019 and newer, while retaining its existing approvals for Porsche, VW, Audi, and Mercedes Benz.\u003c\/p\u003e\n\u003cp\u003eMotul introduced it alongside 8100 X-clean 5W40 GEN2. If you think you're buying a BMW LL-04 or LL-01 approved oil for 2019 and newer cars, chances are you are using an obsolete product that lost its approval months ago and is underperforming versus oil technology available today. Thankfully, Motul has developed a next generation of 8100 X-clean dubbed \"GEN2\" that is approved for the latest BMW LL-04 approval, while also updating the product to meet new standards for approvals from Mercedes Benz, VW, Audi, and Porsche.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201106_172659.jpg?v=1604701789\" alt=\"Motul 8100 X-cess gen2 SAE 5W-40 100% synthetic motor oil, 5 litre jug, front label\" loading=\"lazy\" width=\"1080\" height=\"1340\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eWhat happened: with more stringent emissions standards and updates in technology, automotive manufacturers have shifted to smaller, forced induction engines. During the development of the latest generation of BMW engines, existing approved oils were found to be underperforming in oxidation stability, deposit control, and oil life. Motul invested heavily to retain all OEM approvals in order to be the lead in approved products and overall quality, and updated 8100 X-cess to GEN2.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8100 X-cess gen2 5W40 is OEM approved for all new 2019+ BMWs requiring LL-01 (and backward compatible to all previous cars requiring BMW LL-01)\u003c\/li\u003e\n\u003cli\u003eIncreased oil performance in high horsepower applications\u003c\/li\u003e\n\u003cli\u003eImproved viscosity stability under extreme temperatures\u003c\/li\u003e\n\u003cli\u003eIncreased turbocharger cleanliness and protection\u003c\/li\u003e\n\u003cli\u003eLow pour point for better cold start performance\u003c\/li\u003e\n\u003cli\u003eBetter additive retention contributing to engine protection\u003c\/li\u003e\n\u003cli\u003eLonger oil life\u003c\/li\u003e\n\u003cli\u003eApprovals: BMW LL-01 (all model years), MB 229.5\/226.5, Porsche A40, VW 502 00 \/ 505 00\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201106_172716.jpg?v=1604701794\" alt=\"Back of the Motul 8100 X-cess gen2 5W-40 5 litre jug\" loading=\"lazy\" width=\"986\" height=\"1387\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Case of 3 x 5L Jug, or 1 x 5L Jug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eUse it where your vehicle calls for one of the approvals above. Can your car still use the first generation product? For 8100 X-cess 5W40, the \"first generation\" will eventually be phased out of the market as it does not meet the latest (2019+) BMW LL-01 standard, but it can still be used for all pre-2019 BMW LL-01, Porsche A40, VW 502 00 \/ 505 00, and Mercedes Benz models requiring 229.5\/226.5\/229.3.\u003c\/p\u003e\n\u003cp\u003eFor 8100 X-clean 5W40, the \"first generation\" will remain to cover older manufacturer specifications, such as BMW LL-04 cars prior to 2019, Porsche A40, and VW 502 00 \/ 505 00 \/ 505 01.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/d23zpyj32c5wn3.cloudfront.net\/images\/masonry_bricks\/pictures\/59045\/big\/motul_109761-8100_clean_gen2_5w-40_1l_white.jpg?1588619084\" alt=\"Motul 8100 X-cess gen2 SAE 5W-40 1 litre bottle, front label listing BMW LL-01, MB-Approval 229.5\/226.5, Porsche A40 and VW 502 00\/505 00\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs GEN2 approved for 2019 and newer BMWs?\u003c\/h3\u003e\n\u003cp\u003eYes. 8100 X-cess gen2 5W40 is OEM approved for all new 2019+ BMWs requiring LL-01, and backward compatible to all previous cars requiring BMW LL-01.\u003c\/p\u003e\n\u003ch3\u003eCan my car still use the first generation X-cess?\u003c\/h3\u003e\n\u003cp\u003eYes, if it is a pre-2019 BMW LL-01, Porsche A40, VW 502 00 \/ 505 00, or Mercedes Benz model requiring 229.5\/226.5\/229.3. The first generation does not meet the latest (2019+) BMW LL-01 standard and will eventually be phased out.\u003c\/p\u003e\n\u003ch3\u003eWhich approvals does it carry?\u003c\/h3\u003e\n\u003cp\u003eBMW LL-01 (all model years), MB 229.5\/226.5, Porsche A40, VW 502 00 \/ 505 00.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes. It is in stock at all times, always on hand.\u003c\/p\u003e","brand":"Motul","offers":[{"title":"Case of 3 x 5L Jug","offer_id":31542862905367,"sku":"MO110905","price":275.99,"currency_code":"CAD","in_stock":true},{"title":"1 x 5L Jug","offer_id":31562692919319,"sku":"MO109776","price":100.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201106_172659.jpg?v=1604701789"},{"product_id":"ngk-1422-engine-spark-plugs","title":"Spark Plugs Set of 4 (HKS Replacement)","description":"\u003cp\u003e\u003cstrong\u003eAlways in stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAs good as HKS Spark Plugs IF NOT BETTER!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRICE IS FOR SET OF 4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e A replacement for the HKS 8 heat range plug and a great OEM replacement plug. NGK Laser Iridium, set of 4: 12 mm thread, 26.5 mm reach, 5\/8 in. hex, gasket seat.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA set of 4 NGK Laser Iridium spark plugs that we sell in place of the HKS plug. They are a great OEM replacement. Some people run these plugs with tunes, and they are very good replacement plugs if not tuned; at N75 Motorsports we do not recommend these for a tune, but we see the HKS plug as a waste of money: these are basically the same plug at less than half the cost.\u003c\/p\u003e\n\u003cp\u003eN75 Motorsports will NOT sell the HKS plug, because this product is as good for less than half the cost. We do not feel it is fair for the customer to be \"fooled\" by brand names. We used to sell and stock the HKS 9 heat range version, as they are the cheapest available 9 heat range plug; however, the HKS plug we replace is 8 heat range, the same as these. We do not believe it is fair for a customer to spend over double for basically the exact same plug, if not a worse one. NGK plugs have been the standard in the automotive industry for the last 25 years+: from ultra high performance exotic cars, to daily drivers, to fleet vehicles, you will find NGK from factory.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk.jpg?v=1590890704\" alt=\"NGK Laser Iridium spark plug, white insulator marked NGK IR with a plated steel shell\" loading=\"lazy\" width=\"400\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eNGK Laser Iridium spark plugs are the latest OE spark plug design. They feature a laser welded .8 mm iridium center electrode along with laser welded platinum on the ground electrode, providing the strongest ignitability and the longest life possible. This plug has a 12 mm thread, a 26.5 mm reach, a 5\/8 in. hex and a gasket seat.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNGK Laser Iridium: the latest OE spark plug design\u003c\/li\u003e\n\u003cli\u003eLaser welded .8 mm iridium center electrode\u003c\/li\u003e\n\u003cli\u003eLaser welded platinum on the ground electrode\u003c\/li\u003e\n\u003cli\u003eStrongest ignitability and the longest life possible\u003c\/li\u003e\n\u003cli\u003e8 heat range, the same as the HKS plug\u003c\/li\u003e\n\u003cli\u003eSpark Plug Hex Size: 5\/8 in.\u003c\/li\u003e\n\u003cli\u003eSpark Plug Reach: 26.5 mm\u003c\/li\u003e\n\u003cli\u003eSpark Plug Seat Type: Gasket\u003c\/li\u003e\n\u003cli\u003eSpark Plug Thread Size: 12 mm\u003c\/li\u003e\n\u003cli\u003eUNSPSC: 26101732\u003c\/li\u003e\n\u003cli\u003eSet of 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk1.jpg?v=1590890704\" alt=\"Close-up of the NGK Laser Iridium firing end: fine-wire center electrode, ground electrode and threads\" loading=\"lazy\" width=\"400\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eFREE GAPPING SERVICE: let us know what gap you want in the comments when ordering and we will gap them for you. If no spec is asked for, they will be gapped to .025, as we have had no issues with this gap on stock cars or stuffed turbo cars.\u003c\/p\u003e\n\u003cp\u003eThese are a great OEM replacement; at N75 Motorsports we do not recommend these for a tune. We recommend installation by a qualified technician. Contact us before ordering if you are not sure these plugs suit your engine.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eNGK warrants its spark plugs against defects in workmanship or materials for 60 days from the date of purchase, for the original purchaser; racing use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow do these compare with the HKS plug?\u003c\/h3\u003e\n\u003cp\u003eThe HKS plug is 8 heat range, the same as these. We see these as basically the same plug at less than half the cost, as good as the HKS plug if not better.\u003c\/p\u003e\n\u003ch3\u003eCan I use them with a tune?\u003c\/h3\u003e\n\u003cp\u003eSome people run these plugs with tunes, but at N75 Motorsports we do not recommend these for a tune. They are very good replacement plugs if not tuned.\u003c\/p\u003e\n\u003ch3\u003eWill you gap them for me?\u003c\/h3\u003e\n\u003cp\u003eYes, for free. Tell us the gap you want in the order comments; if no spec is asked for, we gap them to .025.\u003c\/p\u003e\n\u003ch3\u003eIs the price for one plug?\u003c\/h3\u003e\n\u003cp\u003eNo. The price is for a set of 4.\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":31544255250455,"sku":"1422","price":129.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk.jpg?v=1590890704"},{"product_id":"wix-xp-engine-oil-filter-51334xp","title":"WIX XP Engine Oil filter","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT (GT Sport \/ N Line) 1.6T, Hyundai Elantra Sport 1.6T, Hyundai Veloster 1.6T including the Veloster Turbo 2, Hyundai Tucson 1.6T, and Kia 1.6T Gamma models such as the Forte GT. Confirm the filter matches your engine before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe WIX XP is an OE-design aftermarket spin-on engine oil filter. WIX XP filters are considered an aftermarket standard. This is the filter we fit on the 1.6T Gamma platform, and the same filter is included in our \u003ca href=\"https:\/\/n75motorsports.ca\/products\/oil-change-kit\"\u003eOil Change Kit in a Box\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe OEM Hyundai filter is a good filter, but we fit the WIX XP because we believe it is the better filter for this platform.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wix_3b9309c8-6923-4a62-9e77-903eae6a1c90.jpg?v=1591050882\" alt=\"WIX XP black spin-on engine oil filter\" loading=\"lazy\" width=\"1261\" height=\"1500\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eIt is made to OEM spec, which means it has an anti-drain-back valve, so the engine does not lose oil pressure on cold start. It is made to OE design, meets OEM spec per SKU, and is designed to outperform and outlast OE-style filters.\u003c\/p\u003e\n\u003cp\u003eTo compare it with the OEM filter, we weighed both filters and cut them apart. The WIX XP is a much thicker and significantly heavier filter, which is why we consider it the tougher-built of the two.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: OE-replacement, spin-on lube filter\u003c\/li\u003e\n\u003cli\u003eClass: A\u003c\/li\u003e\n\u003cli\u003eDuty type: LD\u003c\/li\u003e\n\u003cli\u003eMedia: Enhanced cellulose\u003c\/li\u003e\n\u003cli\u003eFiltration: 19 micron\u003c\/li\u003e\n\u003cli\u003eBeta ratio: 2\/20 – 6\/20\u003c\/li\u003e\n\u003cli\u003eBurst pressure: 280 PSI\u003c\/li\u003e\n\u003cli\u003eBy-pass valve setting: 8–11\u003c\/li\u003e\n\u003cli\u003eFlow rate: 9–11 GPM\u003c\/li\u003e\n\u003cli\u003eAnti-drain-back valve: Yes (prevents oil-pressure loss on cold start)\u003c\/li\u003e\n\u003cli\u003eHeight: 3.24 in\u003c\/li\u003e\n\u003cli\u003eOuter diameter (top): 3.15 in\u003c\/li\u003e\n\u003cli\u003eInner diameter (top): Closed\u003c\/li\u003e\n\u003cli\u003eThread size: 20 x 1.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThis is a spin-on filter with a 20 x 1.5 mm thread. Confirm the filter matches your engine before ordering. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my car?\u003c\/h3\u003e\n\u003cp\u003eThis is the oil filter we fit on the 1.6T Gamma cars: Elantra GT, Elantra Sport, Veloster, Tucson and Kia 1.6T Gamma models such as the Forte GT. Confirm it matches your engine before ordering. It is also the filter included in our \u003ca href=\"https:\/\/n75motorsports.ca\/products\/oil-change-kit\"\u003eOil Change Kit in a Box\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDoes it have an anti-drain-back valve?\u003c\/h3\u003e\n\u003cp\u003eYes. It is made to OEM spec, so oil pressure is not lost on cold start.\u003c\/p\u003e\n\u003ch3\u003eWhy do you fit the WIX XP instead of the OEM filter?\u003c\/h3\u003e\n\u003cp\u003eThe OEM Hyundai filter is a good filter, but we believe the WIX XP is the better filter for this platform. We weighed both filters and cut them apart: the WIX XP is a much thicker and significantly heavier filter.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"Default Title","offer_id":31550293114903,"sku":"51334XP","price":17.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wix_3b9309c8-6923-4a62-9e77-903eae6a1c90.jpg?v=1591050882"},{"product_id":"copy-of-motul-sport-engine-oil-5w40","title":"Molygen 5W-40 Engine oil Full Synthetic","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN75 Motorsports does not recommend using this product back to back. Use a non Molygen oil every other oil change.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: modern gasoline and diesel engines, with and without exhaust gas turbochargers, that call for SAE 5W-40 and one of the specifications listed below. Liqui Moly Molygen 5W\/40 in 5-liter.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eLiqui Moly Molygen 5W\/40 in 5-liter: a low-viscosity, high-tech, low-friction motor oil with high shear stability, made in Germany with Liqui Moly's revolutionary Molecular Friction Control (MFC) formula. It is an optimum choice for your VW, Audi, Porsche or BMW, for performance and long-lasting engine life, and for turbo or naturally aspirated German vehicles you want to live a long, happy and properly lubricated life.\u003c\/p\u003e\n\u003cp\u003eLiqui Moly makes this formula in 5W\/40 (1 \u0026amp; 5L) and SAE 5W\/30 (1 \u0026amp; 5L); this listing is the 5W\/40 in a 5L jug.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_mpByDKHJwn.png?v=1609488544\" alt=\"Liqui Moly Molygen New Generation 5W-40 engine oil, 5 litre jug\" loading=\"lazy\" width=\"643\" height=\"632\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"349\" src=\"https:\/\/www.youtube.com\/embed\/9Oqv5NhS32w\" width=\"620\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eLiqui Moly combines innovative additive technology with the special Molygen additive. It reliably prevents the formation of deposits, reduces frictional losses in the engine and provides optimum protection against wear; the results are savings in fuel and an extended service life for the engine.\u003c\/p\u003e\n\u003cp\u003eThe oil is now a fluorescent green color, with synthetic tungsten-based friction modifiers: longer engine life, lower fuel consumption, and a 15% lower friction coefficient to reduce wear by up to 30%. Nothing is close to zero friction! It pairs Molecular Friction Control Technology with UV modifiers to spot oil leaks.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutstanding engine cleanliness\u003c\/li\u003e\n\u003cli\u003eExcellent high and low-temperature behavior\u003c\/li\u003e\n\u003cli\u003eFriction and wear reducing: a 15% lower friction coefficient reduces wear by up to 30%\u003c\/li\u003e\n\u003cli\u003eOptimum stability to aging\u003c\/li\u003e\n\u003cli\u003eExcellent wear protection\u003c\/li\u003e\n\u003cli\u003eMixable with all commercially available motor oils\u003c\/li\u003e\n\u003cli\u003eOutstanding lubrication reliability\u003c\/li\u003e\n\u003cli\u003eHigh shear stability\u003c\/li\u003e\n\u003cli\u003eTested for turbochargers and catalytic converters\u003c\/li\u003e\n\u003cli\u003eRapid oil delivery at low temperatures\u003c\/li\u003e\n\u003cli\u003eUV modifiers to spot oil leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiqui Moly recommends it for vehicles or assemblies for which the following specifications or original part numbers are required:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eACEA A3\u003c\/li\u003e\n\u003cli\u003eACEA B4\u003c\/li\u003e\n\u003cli\u003eAPI SN\u003c\/li\u003e\n\u003cli\u003eBMW Longlife-01 (up to 2018)\u003c\/li\u003e\n\u003cli\u003eMB 229.5\u003c\/li\u003e\n\u003cli\u003ePorsche A40\u003c\/li\u003e\n\u003cli\u003eRenault RN 0700\u003c\/li\u003e\n\u003cli\u003eVW 502 00\u003c\/li\u003e\n\u003cli\u003eVW 505 00\u003c\/li\u003e\n\u003cli\u003eLiqui Moly's current list also includes Fiat 9.55535-H2, 9.55535-N2 and 9.55535-Z2, GWM, HAVAL, Opel GM-LL-B-025 and Renault RN 0710\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlash point 220 °C (428 °F), DIN ISO 2592\u003c\/li\u003e\n\u003cli\u003eTotal base number 11,3 mg KOH\/g, DIN ISO 3771\u003c\/li\u003e\n\u003cli\u003eSulfate ash 1,0 - 1,6 g\/100g, DIN 51575\u003c\/li\u003e\n\u003cli\u003eColor \/ appearance: green, fluorescent (grün, fluoreszierend)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eBest for modern gasoline and diesel engines with and without exhaust gas turbochargers, and for the protection and value retention of the engine during long intervals between oil changes and with high loads. Note the vehicle and engine manufacturers' operating instructions.\u003c\/p\u003e\n\u003cp\u003eIt can be mixed with all commercially available motor oils, but full effectiveness is only achieved when the product is used on its own (i.e. no mixing). N75 Motorsports does not recommend using this product back to back: use a non Molygen oil every other oil change.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I use it at every oil change?\u003c\/h3\u003e\n\u003cp\u003eWe do not recommend using it back to back. Use a non Molygen oil every other oil change.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with other oils?\u003c\/h3\u003e\n\u003cp\u003eIt can be mixed with all commercially available motor oils, but full effectiveness is only achieved when it is used on its own.\u003c\/p\u003e\n\u003ch3\u003eIs it safe with a turbo and catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It is tested for turbochargers and catalytic converters.\u003c\/p\u003e\n\u003ch3\u003eHow much oil is in the jug?\u003c\/h3\u003e\n\u003cp\u003e5L. This listing is Liqui Moly Molygen 5W\/40 in 5-liter.\u003c\/p\u003e","brand":"Liqui Moly","offers":[{"title":"Default Title","offer_id":31700634075159,"sku":"LM20232","price":84.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_mpByDKHJwn.png?v=1609488544"},{"product_id":"dei-reflect-a-gold-heat-shield-barrier-2x15","title":"DEI Reflect-A-Gold Heat Shield Barrier Self Adhesive Tape","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: a self-adhesive tape, not vehicle-specific. Use it on intake pipes, intercooler and charge piping, the intake manifold, air boxes, firewalls, engine covers, bulkheads, heat shields and any surface that needs protection from radiant heat. DEI part numbers 010395 (1.5\" x 30') and 010397 (2\" x 30').\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eDEI Reflect-A-Gold is a universal, self-adhesive gold heat-reflective tape made by Design Engineering, Inc. It reflects radiant heat and handles continuous temperatures up to 800°F. It reduces heat soak into air boxes, seats, firewalls, transmission tunnels and intakes, and it is suited to race and track use.\u003c\/p\u003e\n\u003cp\u003eOwners report that it works well and looks good. We also offer to wrap the end tanks and cold pipe of our FMIC (front-mount intercooler) kit with this tape.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/heat-shieldings-heat-reflective-tape-gold_1.jpg?v=1602112247\" alt=\"DEI Reflect-A-Gold heat reflective tape wrapped on an intake tube and heat shield in an engine bay, with rolls of the tape\" loading=\"lazy\" width=\"960\" height=\"685\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe tape is a metalized polyimide laminated to a lightweight glass-fiber cloth, with a high-temperature pressure-sensitive adhesive protected by a release liner. It is 0.0065\" thick, lightweight and needs minimal clearance, and it will not lift off.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReflects radiant heat; handles continuous temperatures up to 800°F\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive, with the adhesive and release liner rated up to 325°F\u003c\/li\u003e\n\u003cli\u003eMetalized polyimide on a lightweight glass-fiber cloth\u003c\/li\u003e\n\u003cli\u003e0.0065\" thick, minimal clearance\u003c\/li\u003e\n\u003cli\u003eResists UV degradation\u003c\/li\u003e\n\u003cli\u003eEasy to apply and will not lift off\u003c\/li\u003e\n\u003cli\u003eReduces heat soak into air boxes, seats, firewalls, transmission tunnels and intakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dei.jpg?v=1602112260\" alt=\"Roll of DEI Reflect-A-Gold gold self-adhesive heat-reflective tape, partly unrolled, on a white background\" loading=\"lazy\" width=\"1280\" height=\"1275\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1.5\" x 30' (DEI part 010395) or 2\" x 30' (DEI part 010397). Choose the width to suit the surface: 1.5\" for narrower pipes and tight runs, 2\" for wider pipes, end tanks and larger panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eApply it to a clean, dry surface. Cut the tape to length, peel back the release liner, and press it down firmly. DEI says not to apply it directly to exhaust components.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dei_reflect_a_gold_tape_2_inch_x_30ft_roll_1475819717_57016a3a.jpg?v=1602112258\" alt=\"Roll of DEI Reflect-A-Gold heat reflective tape in its retail pack\" loading=\"lazy\" width=\"640\" height=\"640\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat sizes does it come in?\u003c\/h3\u003e\n\u003cp\u003e1.5\" x 30' and 2\" x 30'; pick the width to suit the surface.\u003c\/p\u003e\n\u003ch3\u003eHow hot can it handle?\u003c\/h3\u003e\n\u003cp\u003eIt reflects radiant heat and handles continuous temperatures up to 800°F; the adhesive and release liner are rated up to 325°F.\u003c\/p\u003e\n\u003ch3\u003eWhere can I use it?\u003c\/h3\u003e\n\u003cp\u003eIntake and intercooler piping, the intake manifold, air boxes, firewalls, engine covers, bulkheads, seat bottoms and any area that needs protection from radiant heat. It is self-adhesive and universal.\u003c\/p\u003e\n\u003ch3\u003eCan I put it on my exhaust?\u003c\/h3\u003e\n\u003cp\u003eNo. DEI says not to apply it directly to exhaust components.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"1.5\"x30'","offer_id":32904426291223,"sku":"DEI10395","price":117.25,"currency_code":"CAD","in_stock":false},{"title":"2\"x30'","offer_id":32904426258455,"sku":"DEI10397","price":117.25,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/heat-shieldings-heat-reflective-tape-gold_1.jpg?v=1602112247"},{"product_id":"k-n-drop-in-panel-air-filter","title":"Hyundai \/ Kia 1.6T Performance High Flow Filter","description":"\u003cp\u003e\u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN Day Sale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Up to 2020 Model Year Hyundai Elantra Sport, Kia Forte GT and Hyundai Veloster Turbo (Hyundai \/ Kia 1.6T).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA K\u0026amp;N performance high flow filter for the Hyundai \/ Kia 1.6T: performance from the intake system while keeping the closed loop OEM intake, and added performance without any worries of dealership warranty issues. Some people prefer these over full intake systems.\u003c\/p\u003e\n\u003cp\u003eThis is the minimum requirement for an ECU tune. Tuning on the OEM intake is possible, but a higher flow intake is needed. This gets the job done.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/kn-33-5050_alt_3.jpg?v=1599098191\" alt=\"K\u0026amp;N high flow panel air filter for the Hyundai and Kia 1.6T, red pleated media in a black frame\" loading=\"lazy\" width=\"720\" height=\"720\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eA high flow filter that goes in the OEM intake in place of the factory filter, so the intake stays a closed loop system.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh flow performance filter\u003c\/li\u003e\n\u003cli\u003eKeeps the closed loop OEM intake\u003c\/li\u003e\n\u003cli\u003eAdded performance without any worries of dealership warranty issues\u003c\/li\u003e\n\u003cli\u003eThe minimum requirement for an ECU tune\u003c\/li\u003e\n\u003cli\u003eFor up to 2020 Model Year Elantra Sport, Forte GT and Veloster Turbo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MAINT_Pnl_688.jpg?v=1599098191\" alt=\"K\u0026amp;N panel air filter fitted in an open factory airbox in an engine bay\" loading=\"lazy\" width=\"1400\" height=\"1400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe filter fits the OEM intake, which stays a closed loop system; no full intake system is needed. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/33-5050_Side_1.png?v=1599098191\" alt=\"K\u0026amp;N panel air filter seen edge-on, showing its thin profile\" loading=\"lazy\" width=\"1400\" height=\"1400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eK\u0026amp;N gives its No-Hassle Lifetime Limited Warranty on its washable replacement air filters: it lasts for the lifetime of the product and covers the original purchaser only, and it is not transferable. Damage from racing, competition or any off-road use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eUp to 2020 Model Year Elantra Sport, Forte GT and Veloster Turbo, with the 1.6T.\u003c\/p\u003e\n\u003ch3\u003eIs it enough for an ECU tune?\u003c\/h3\u003e\n\u003cp\u003eThis is the minimum requirement for an ECU tune. Tuning on the OEM intake is possible, but a higher flow intake is needed, and this gets the job done.\u003c\/p\u003e\n\u003ch3\u003eWill it cause dealership warranty issues?\u003c\/h3\u003e\n\u003cp\u003eIt keeps the closed loop OEM intake, so you get added performance without any worries of dealership warranty issues.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes, it is in stock.\u003c\/p\u003e","brand":"K\u0026N Filters","offers":[{"title":"Default Title","offer_id":31739275673623,"sku":"33-5050","price":87.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/kn-33-5050_alt_3.jpg?v=1599098191"},{"product_id":"gfb-bov-t9511-deceptor-pro-ii","title":"1.6T 1.6T Deceptor Pro II In Cabin Adjustable","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.6T: Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Elantra GT N Line 2019-2020, Veloster Turbo 2 2019-2020 and Kona 1.6T 2019-2021, and the Kia Forte GT and Kia Forte5. GFB's own application list also includes the Hyundai Tucson 1.6 GDI Turbo (facelift) 2019-2020, i30 SR\/N-Line Hatch 1.6T-GDI (PD, 2016-on) and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eControl BOV from inside the Cabin! Turn a knob for full BOV, switch it back for full stealth mode! The GFB Deceptor Pro II is a diverter \/ blow-off valve with GFB's TMS advantage and an in-cabin sound adjustment system. So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the 'Respons' concept even further: now you can control the sound of the BOV from inside the cabin.\u003c\/p\u003e\n\u003cp\u003eTo top it off, if your car typically suffers issues such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9511.jpg?v=1600987489\" alt=\"GFB Deceptor Pro II blow-off valve with its motor housing, silver inlet and trumpet, beside the in-cabin controller with red backlit dial\" loading=\"lazy\" width=\"639\" height=\"455\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe venting bias is adjusted electronically on-the-fly. A high-torque geared electric motor drives the volume adjustment mechanism, through a durable, low-friction gear train supported by a precision sealed ball-bearing. The sleek, compact in-car controller has a backlit dial and gives remote proportional venting bias \/ volume control, from silent to loud or anywhere in between, with end point adjustment to control the maximum vent to atmosphere bias setting. Revised porting optimises flow and venting bias, the compact design fits in most factory valve locations, and a new bore finishing process ensures a lifetime of reliable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/gfb.com.au\/wp-content\/uploads\/2018\/11\/deceptor.jpg\" alt=\"GFB Deceptor Pro II blow-off valve installed in an engine bay\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust your BOV venting bias electronically on-the-fly\u003c\/li\u003e\n\u003cli\u003eRemote proportional venting bias\/volume control, from silent to loud or anywhere in between\u003c\/li\u003e\n\u003cli\u003eSleek, compact in-car BOV volume controller with backlit dial\u003c\/li\u003e\n\u003cli\u003eEnd point adjustment to control maximum vent to atmosphere bias setting\u003c\/li\u003e\n\u003cli\u003eVolume adjustment mechanism driven by a high-torque geared electric motor\u003c\/li\u003e\n\u003cli\u003eDurable, low-friction gear train supported by precision sealed ball-bearing\u003c\/li\u003e\n\u003cli\u003eRevised porting to optimise flow and venting bias\u003c\/li\u003e\n\u003cli\u003eCompact design fits in most factory valve locations\u003c\/li\u003e\n\u003cli\u003eNew bore finishing process ensures a lifetime of reliable operation\u003c\/li\u003e\n\u003cli\u003eDirect bolt on for many vehicles\u003c\/li\u003e\n\u003cli\u003eSupplied with all parts and wiring required to have it up and running quickly and easily\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t95111.jpg?v=1600987489\" alt=\"Side view of the GFB Deceptor Pro II showing the motor housing, trumpet and wiring lead\" loading=\"lazy\" width=\"650\" height=\"650\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Pierburg BOV Solenoid:\u003c\/strong\u003e No (the GFB kit on its own) or Yes (the kit with a Pierburg BOV solenoid added).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eDirect bolt-on for most vehicles available, and supplied with all parts and wiring required to have it up and running quickly and easily. Complete range of fitment options: the Deceptor Pro II direct fit bolt-on range covers a huge list of popular vehicles, and you can also purchase a variety of hose and flange adaptors for custom fitments.\u003c\/p\u003e\n\u003cp\u003eGFB's instructions: the valve bolts into the factory diverter valve location, the in-cabin control box connects to an ignition-switched +12V supply and to ground, and its cable runs through the firewall to the valve. If you are not experienced in automotive wiring, GFB recommends that the installation is carried out by a professional: irreversible damage could occur if it is wired incorrectly, which is not covered by warranty. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t951111.jpg?v=1600987489\" alt=\"GFB Deceptor Pro II valve with silver inlet and trumpet, and the in-cabin controller with its wiring lead\" loading=\"lazy\" width=\"650\" height=\"650\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGo Fast Bits gives the original owner a limited lifetime warranty against defective materials or faulty workmanship, once the product is registered on GFB's website. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow do I change the sound?\u003c\/h3\u003e\n\u003cp\u003eWith the backlit dial on the in-cabin controller: from silent to loud or anywhere in between. Turn a knob for full BOV, switch it back for full stealth mode.\u003c\/p\u003e\n\u003ch3\u003eMy car backfires or stalls when venting to atmosphere. Will this help?\u003c\/h3\u003e\n\u003cp\u003eIt can. The controller can easily be configured to limit the maximum venting ratio, so you can achieve a blow-off sound without having to put up with the issues.\u003c\/p\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe 1.6T Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Elantra GT N Line 2019-2020, Veloster Turbo 2 2019-2020 and Kona 1.6T 2019-2021, and the Kia Forte GT and Forte5. GFB also lists the Tucson 1.6 GDI Turbo (facelift) 2019-2020, i30 SR\/N-Line Hatch 1.6T-GDI and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eFREE SHIPPING to Canada and US.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"No","offer_id":37387372724410,"sku":"T9511","price":459.99,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":37387372691642,"sku":null,"price":559.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9511.jpg?v=1600987489"},{"product_id":"copy-of-n75-engine-oil-catch-can-universal","title":"N75 Engine Oil Catch Can Universal","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal kit for Hyundai and Kia 1.6T and 2.0T turbo engines. This is not a direct-fit kit: choose the 1.6T or 2.0T option for your engine and mount the can where it fits your engine bay.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe N75 Motorsports Engine Oil Catch Can is a universal oil catch can (OCC) kit, designed and assembled in Canada. It sits in the crankcase breather line and catches the oil and fuel vapour in the blow-by before it reaches your intake. This is a working kit, not a show piece.\u003c\/p\u003e\n\u003cp\u003eThe can holds 200 ml on the PCV kit and carries a universal mounting bracket, so you can angle it to suit your engine bay. Our goal was a catch can that works well and is simple to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/occ_5d2b4ef9-2fa8-4bb6-8609-3ef5623d31ad.jpg?v=1625874210\" alt=\"N75 Motorsports universal oil catch can kit in its box: black can with the N75 Motorsports cap, two coils of fuel injector hose, hose clamps and bagged fittings\" loading=\"lazy\" width=\"4032\" height=\"2268\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eCrankcase blow-by is the oil and fuel vapour from the crankcase, normally routed through the PCV into the intake. The catch can sits in that line and takes the oil and fuel out before it reaches the intake.\u003c\/p\u003e\n\u003cp\u003eInside the can, the vapour passes the double baffles and cooling plate, so the oil and fuel condense and fall to the bottom. The cleaned air leaves through the 50 micron filter, and a one-way check valve on the PCV hose keeps the flow going the right way.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20210101_033238.jpg?v=1625874210\" alt=\"Cutaway diagram of the catch can: oil-laden blow-by enters at IN, passes the internal baffles, and clean air leaves at OUT\" loading=\"lazy\" width=\"681\" height=\"940\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e200 ml can on the PCV kit\u003c\/li\u003e\n\u003cli\u003e50 micron filter\u003c\/li\u003e\n\u003cli\u003eDouble baffled\u003c\/li\u003e\n\u003cli\u003eCooling plate\u003c\/li\u003e\n\u003cli\u003eUniversal mounting bracket, so you mount and angle the can to suit\u003c\/li\u003e\n\u003cli\u003eOne-way check valve for the PCV line\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in Canada\u003c\/li\u003e\n\u003cli\u003eIn the kit: 1x N75 Motorsports Oil Catch Can with universal mounting bracket; 2x 5 ft lengths of 3\/8\" fuel injector hose (10 ft total); 5x hose clamps; 1x one-way check valve for the hose normally connected to the PCV; twist ties; mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/occc5_3359090f-6a99-4391-a5d4-7e8279875928.jpg?v=1625874210\" alt=\"Inside the N75 catch can: the brass 50 micron filter element and the perforated cooling and baffle plate\" loading=\"lazy\" width=\"2268\" height=\"4032\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Kit:\u003c\/strong\u003e PCV (1.6T), Extended Capacity (1.6T), PCV (2.0T) or Extended Capacity (2.0T). Choose the kit for your engine and the setup you want; the 1.6T and 2.0T choice matches the kit to your engine size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWith an OEM intake, mount the can on the passenger side; with an aftermarket intake, mount it on the driver side.\u003c\/li\u003e\n\u003cli\u003eHand-tighten the can body only, like an oil filter; that makes the air seal. Do not over-tighten, or you can damage the gasket.\u003c\/li\u003e\n\u003cli\u003eRoute the two hoses to the can, keep the one-way check valve on the PCV hose, and secure them with the supplied clamps.\u003c\/li\u003e\n\u003cli\u003eRun and tie the hoses along cooler paths, away from hot surfaces such as the turbo and exhaust side.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOwners describe it as a solid, complete kit, with ample hose and ties for clean runs, and say the universal bracket lets them mount and angle the can where they want. A Kia Forte GT owner confirms the fit, and an Elantra N owner reports fabricating a small bracket to seat the can beside the reservoir.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/PXL_20210708_013533567.jpg?v=1625874210\" alt=\"N75 Motorsports catch can mounted beside the coolant reservoir on a Hyundai N engine, with both hoses clamped\" loading=\"lazy\" width=\"1257\" height=\"943\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this a direct-fit kit?\u003c\/h3\u003e\n\u003cp\u003eNo. It is the universal kit, with a universal mounting bracket you angle to suit your engine bay.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the 1.6T and 2.0T options?\u003c\/h3\u003e\n\u003cp\u003eChoose the one that matches your engine size. If you are unsure which fits your car, email info@n75motorsports.ca before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat does the kit include?\u003c\/h3\u003e\n\u003cp\u003eThe can and its universal mounting bracket, 10 ft of 3\/8\" hose, five clamps, a one-way PCV check valve, twist ties and mounting screws.\u003c\/p\u003e\n\u003ch3\u003eHow tight should the can be?\u003c\/h3\u003e\n\u003cp\u003eHand tight, like an oil filter. Do not over-tighten, or you can damage the gasket.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"PCV (1.6T)","offer_id":32904646656023,"sku":"UPCV16","price":149.99,"currency_code":"CAD","in_stock":false},{"title":"Extended Capacity (1.6T)","offer_id":37783716495546,"sku":"","price":199.99,"currency_code":"CAD","in_stock":false},{"title":"PCV (2.0T)","offer_id":39917573439674,"sku":"","price":149.99,"currency_code":"CAD","in_stock":false},{"title":"Extended Capacity (2.0T)","offer_id":39917573537978,"sku":"","price":199.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/occ_5d2b4ef9-2fa8-4bb6-8609-3ef5623d31ad.jpg?v=1625874210"},{"product_id":"hks-m45il-spark-plugs-ksg","title":"M45IL Kia Stinger GT 3.3TT Spark Plugs","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger GT 3.3T (3.3TT). Sold as a set of six.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA set of six HKS Super Fire Racing M45iL spark plugs for the Kia Stinger 3.3T. We recommend them for tuned cars, including cars running a piggyback.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/50003-M45IL-2.jpg?v=1603314306\" alt=\"HKS Super Fire Racing M45iL iridium spark plug next to its red HKS box\" loading=\"lazy\" width=\"1300\" height=\"730\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe centre electrode is an iridium alloy, which HKS says lowers the voltage needed to fire the plug and improves ignition and durability. The outer electrode is shortened and reshaped with a square platinum chip, made lighter to resist vibration, and a thermal edge on the insulator plus a spark support gap help prevent carbon build-up. It is a long-reach plug in the M45iL heat range.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIridium-alloy centre electrode, which HKS says lowers the voltage needed to fire the plug and improves ignition and durability\u003c\/li\u003e\n\u003cli\u003eSquare platinum chip on a shortened, reshaped outer electrode, made lighter to resist vibration\u003c\/li\u003e\n\u003cli\u003eThermal edge on the insulator and a spark support gap to help prevent carbon build-up\u003c\/li\u003e\n\u003cli\u003eLong-reach type: 14 mm thread, 26.5 mm reach, 16 mm hex\u003c\/li\u003e\n\u003cli\u003eHeat range: M45iL, which HKS lists as equivalent to NGK heat range 9\u003c\/li\u003e\n\u003cli\u003eGapped by us to 0.025 in (about 0.64 mm) before it ships\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet of:\u003c\/strong\u003e 6 is the only value: six plugs, one for each cylinder of the 3.3T V6.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe gap every plug to 0.025 in (about 0.64 mm) before it ships. If you want a different gap, put it in the order notes. In our experience 0.025 in works well on turbocharged Hyundai and Kia engines, even with hybrid turbos.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eHKS gives the original purchaser a 1-year warranty against defects in materials and workmanship. Claims go through the seller with the original purchase order, photos and video. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat gap do you set?\u003c\/h3\u003e\n\u003cp\u003e0.025 in, unless you ask for another gap in the order notes.\u003c\/p\u003e\n\u003ch3\u003eWhich heat range is it?\u003c\/h3\u003e\n\u003cp\u003eThe M45iL. HKS lists it as equivalent to NGK heat range 9.\u003c\/p\u003e\n\u003ch3\u003eWhere can I read HKS's own description?\u003c\/h3\u003e\n\u003cp\u003eOn HKS USA's \u003ca href=\"https:\/\/hksusa.com\/category\/subcategory\/313\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSuper Fire Racing M-series page\u003c\/a\u003e.\u003c\/p\u003e","brand":"HKS","offers":[{"title":"6","offer_id":37129687367866,"sku":"50003","price":279.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/50003-M45IL-2.jpg?v=1603314306"},{"product_id":"mishmoto-mmbcc-stngr-18pbe-pvc-oil-cc-direct-fit-ksg","title":"Kia Stinger PVC Oil CC Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eSpecial order from Mishimoto: 2-3 week wait\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Direct fit for the 2018+ Kia Stinger GT (3.3L twin-turbocharged V6). Mishimoto now lists this kit as a direct fit for the 2018-2021 Kia Stinger GT, and a separate kit for the 2022+ Stinger GT, so confirm your model year with us before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eKia came out of nowhere to stake their claim in the luxury sedan market segment. With the intuitive automatic transmission coupled to the 3.3L twin-turbocharged V6, it's no wonder the likes of standard benchmarks are worried. Direct injection combined with the high-compression of turbocharging means a hotbed for carbon buildup, and the Mishimoto 2018+ Kia Stinger GT Direct-Fit Catch Can Kit is there to keep your Stinger running to its full potential.\u003c\/p\u003e\n\u003cp\u003eMishimoto's catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, they are not heated, so all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while these catch cans trap the blow-by and keep it out of the engine permanently. In Mishimoto's words: if you've seen what we've seen in the bottom of our catch cans, you won't want that draining back into your oil either.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMBCC-STNGR-18PBE_2_6.png?v=1603318704\" alt=\"Mishimoto black oil catch can on its application-specific mounting bracket for the Kia Stinger GT\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMounted with a robust, application-specific bracket, Mishimoto's patent pending compact 2-port catch can is installed in line with the factory PCV system in order to separate fuel vapors and oil droplets from the relieving crankcase pressure. As an extra layer of defense, the catch can also includes a 50-micron bronze filter designed for capturing any rogue blow-by particles. The can is billet 6061 aluminum sealed with Viton™ O-rings, and an internal air diverter increases air turbulence to improve oil separation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for the 2018+ Kia Stinger GT\u003c\/li\u003e\n\u003cli\u003eSingle can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter\u003c\/li\u003e\n\u003cli\u003eHelps reduce carbon buildup on intake valves\u003c\/li\u003e\n\u003cli\u003ePatented (US D884,760 S) billet 6061 aluminum can sealed with Viton™ O-rings\u003c\/li\u003e\n\u003cli\u003eInstalls in under 30 minutes\u003c\/li\u003e\n\u003cli\u003eRobust, application-specific bracket mounts the can in a serviceable location\u003c\/li\u003e\n\u003cli\u003eIncludes pre-molded hoses for simplified installation\u003c\/li\u003e\n\u003cli\u003eDefends intake system and essential components from oil blow-by\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can\u003c\/li\u003e\n\u003cli\u003eCatch can has a 2 oz. capacity for longer servicing intervals (Mishimoto's current figure)\u003c\/li\u003e\n\u003cli\u003eInternal air diverter increases air turbulence to improve oil separation\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper octane levels to reduce potential detonation\u003c\/li\u003e\n\u003cli\u003eFilter and can are fully serviceable\u003c\/li\u003e\n\u003cli\u003eFits with Mishimoto Petcock Drain Kit\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eIn the kit: (1) compact baffled oil catch can, (1) application-specific mounting bracket, (2) direct-fit hoses, (1) 3\/8\" aluminium barbed fitting, (1) 1\/2\" aluminium barbed fitting, (4) worm gear clamps and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMBCC-STNGR-18PBE_1_6.png?v=1603318706\" alt=\"Mishimoto Kia Stinger catch can kit contents: black catch can, mounting bracket, two hoses, barbed fittings and four worm gear clamps\" loading=\"lazy\" width=\"800\" height=\"792\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eInstallation is a breeze with the pre-molded hoses, keeping the time you spend under the hood to less than 30 minutes. The robust, application-specific bracket mounts the can in a serviceable location, and the filter and can are fully serviceable. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/300-MMBCC-STNGR-18PBE-1_6.png?v=1603318706\" alt=\"Mishimoto catch can installed in the engine bay of a blue Kia Stinger GT\" loading=\"lazy\" width=\"700\" height=\"700\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eMishimoto Lifetime Warranty. Like all of Mishimoto's products, the Mishimoto 2018+ Kia Stinger GT Direct-Fit Catch Can Kit is covered under the Mishimoto Lifetime Warranty to protect your investment on more than one level. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich Stinger does it fit?\u003c\/h3\u003e\n\u003cp\u003eIt is a direct fit for the 2018+ Kia Stinger GT. Mishimoto now lists this kit for the 2018-2021 Stinger GT and a separate kit for the 2022+ Stinger GT, so confirm your model year with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to install?\u003c\/h3\u003e\n\u003cp\u003eUnder 30 minutes, with the pre-molded hoses.\u003c\/p\u003e\n\u003ch3\u003eHow is it different from an air-oil separator?\u003c\/h3\u003e\n\u003cp\u003eMishimoto's catch cans are not heated, so all of the blow-by condenses in the can, and they trap it and keep it out of the engine permanently instead of draining it back into the oil pan.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from Mishimoto, with a 2-3 week wait.\u003c\/p\u003e","brand":"Mishmoto","offers":[{"title":"Default Title","offer_id":37129736421562,"sku":"","price":299.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMBCC-STNGR-18PBE_2_6.png?v=1603318704"},{"product_id":"n75-race-valve-bov-solenoid-valve-replacement-kit-pierburg","title":"N75 Race Valve BOV Solenoid Valve Upgrade Kit (Pierburg)","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai and Kia 1.6T and 2.0T turbo engines that use this BOV control solenoid: the 2.0T N cars (Veloster N, Elantra N, Kona N) and the 1.6T cars (Veloster Turbo 2, Forte GT, Kona, Elantra GT). Choose by engine in the Setup option.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA complete blow-off valve (BOV) solenoid upgrade kit that replaces your factory BOV control solenoid with our Signature Series Race Valve, a Pierburg valve made in Germany. It includes the valve, a wiring-harness conversion and the hoses needed to fit it, with no separate parts to source; the 1.6T version also adds a mounting bracket. It does not require ECU tuning.\u003c\/p\u003e\n\u003cp\u003eThe kit is developed in Canada and the USA and made in Canada. We have sold and run this valve for five years, with the only failures being units defective out of the box. It comes with black hoses. Design patent pending.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Screenshot_20210918-190736_Facebook_1024x1024_7955c2d5-cc10-455b-93dd-0109b502cce6.jpg?v=1633067700\" alt=\"N75 Motorsports BOV solenoid valve, the Pierburg Signature Series Race Valve used in this upgrade kit\" loading=\"lazy\" width=\"1000\" height=\"842\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eWe use the same Pierburg valve here and in our \u003ca href=\"https:\/\/n75motorsports.ca\/products\/n75-race-valve\"\u003eEBCS wastegate solenoid upgrade\u003c\/a\u003e, and we have not changed it. It has bigger ports and a bigger valve body for more airflow, responds more quickly to ECU inputs, and stays closed until the ECU commands it to open.\u003c\/p\u003e\n\u003cp\u003eWe have tested the kit for 36 months across 3 vehicles in 2 countries and 250,000 km with no issues, and we see less \"rapid fire\" from the BOV. Even our project Veloster N had a BOV solenoid fail on the dyno and was limited to 8 psi until this kit was fitted. We recommend it before tuning or running more boost.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete kit: valve, harness, hoses and zip ties, plus a mounting bracket on the 1.6T version\u003c\/li\u003e\n\u003cli\u003ePierburg Signature Series Race Valve, made in Germany\u003c\/li\u003e\n\u003cli\u003eBigger ports and a bigger valve body for more airflow\u003c\/li\u003e\n\u003cli\u003eMore responsive to ECU inputs; stays closed until commanded\u003c\/li\u003e\n\u003cli\u003eDoes not require ECU tuning\u003c\/li\u003e\n\u003cli\u003eTested for 36 months across 3 vehicles in 2 countries and 250,000 km with no issues\u003c\/li\u003e\n\u003cli\u003eDeveloped in Canada and the USA, made in Canada\u003c\/li\u003e\n\u003cli\u003eComes with black hoses\u003c\/li\u003e\n\u003cli\u003eDesign patent pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201103_165144.jpg?v=1633067700\" alt=\"Pierburg race valve mounted on its bracket in the engine bay, with its Pierburg part label visible and a hose connected\" loading=\"lazy\" width=\"2268\" height=\"4032\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup:\u003c\/strong\u003e With bracket for 1.6T engine: the Pierburg valve on a bracket, a wiring-harness conversion, two sections of vacuum hose (to the BOV and the cold pipe) and zip ties. Without bracket for 1.6T\/2.0T (\"N\" Vehicles): the valve, a wiring harness, hoses, and zip ties for the valve and the hoses. Without bracket for 2.0T (\"N\" Vehicles) engine with aftermarket FMIC (Longer Hoses): the same kit with longer hoses to clear an aftermarket front-mount intercooler. The N-vehicle and aftermarket-FMIC kits differ only in hose length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eTrim the hoses to length.\u003c\/li\u003e\n\u003cli\u003eMount the valve and tie it down with the zip ties.\u003c\/li\u003e\n\u003cli\u003eConnect the hoses (one to the cold pipe, one to the intake, and the BOV port to the BOV) and plug in the harness.\u003c\/li\u003e\n\u003cli\u003eDrive.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOwners report an easy install and a good fit, with no fault codes after fitting and smoother boost, tighter throttle response and no hesitation. The labelled photo below shows where each hose connects.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/intake.jpg?v=1633067700\" alt=\"N75 Race Valve BOV solenoid with its three ports labelled Coldpipe, Intake and BOV to show where each hose connects\" loading=\"lazy\" width=\"1762\" height=\"1211\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow do I know my BOV solenoid is failing?\u003c\/h3\u003e\n\u003cp\u003eA failing factory BOV control solenoid usually causes a check-engine light, specifically fault code P2261, the BOV opening when you're on throttle, or the BOV pulsating.\u003c\/p\u003e\n\u003ch3\u003eDo I need an ECU tune to run this?\u003c\/h3\u003e\n\u003cp\u003eNo. It does not require tuning; we recommend fitting it if you plan to tune or run more boost.\u003c\/p\u003e\n\u003ch3\u003eWhich option do I choose?\u003c\/h3\u003e\n\u003cp\u003eFor 1.6T engines, the with-bracket kit. For the 2.0T N cars, a without-bracket kit; choose the aftermarket-FMIC version if you run an aftermarket front-mount intercooler.\u003c\/p\u003e\n\u003ch3\u003eWill it help a check-engine light or a BOV that opens on throttle?\u003c\/h3\u003e\n\u003cp\u003eA failing BOV solenoid is the usual cause of P2261 and those symptoms, and this kit replaces it. We have also seen it help some cars with a BOV opening under full load, though we do not advertise it as a cure; if it helps, that is a bonus.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"With bracket for 1.6T engine","offer_id":37385722167482,"sku":"12-322","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"Without bracket for 1.6T\/2.0T (\"N\" Vehicles)","offer_id":39544042062010,"sku":"12-321","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"Without bracket for 2.0T (\"N\" Vehicles) engine with aftermarket FMIC (Longer Hoses)","offer_id":40976071065786,"sku":"12-322","price":227.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Screenshot_20210918-190736_Facebook_1024x1024_7955c2d5-cc10-455b-93dd-0109b502cce6.jpg?v=1633067700"},{"product_id":"wagner-tuning-intercooler-upgrade-elantra-gts-n-line-es-vt2-forte-gt-forte5","title":"Wagner Tuning Intercooler 1.6T","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe now discount ECU tuning for Wagner Tuning FMIC buyers by 15%. Starting March 14th \/ 2022.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai\/KIA 1.6TGDI: Elantra Sport, Elantra GT N Line, Elantra GTS, Veloster Turbo 2, Forte GT and Forte5.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA competition racing intercooler kit from Wagner Tuning for the Hyundai\/KIA 1.6TGDI. Simply put, it is the best available for our platform. We have logged this intercooler against other performance replacements, universal and direct fit, and it performs the best from all our data: it beats our own V2.2 FMIC kit by 7 degrees, and this core shows zero sign of heat soak, even on a 300whp bigger turbo 1.6T.\u003c\/p\u003e\n\u003cp\u003ePerfectly suited for track days, big turbos, or even just to unleash your tune's full potential, this will bolt on 25whp-30whp on a tuned vehicle. Expect 10whp+ on an OEM tuned vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_ECz8WrIiJK.png?v=1621053631\" alt=\"Wagner Tuning competition intercooler for the Hyundai and Kia 1.6T-GDI, front view of the stepped tube fin core\" loading=\"lazy\" width=\"962\" height=\"488\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMade In Germany, and CAD designed to optimize internal flow and reduce back pressure. The WAGNERTUNING high-performance intercooler has a new competition core (tube fin) measuring 580 mm x 120 mm x 150 mm + 580 mm x 62 mm x 70 mm (22.83Inch x 4.72Inch x 5.9Inch + 22.83Inch x 2.44Inch x 2.76Inch), a stepped core of 12.96 liters (790.87Inch³). It offers a 60% larger frontal surface and 118% more core volume than the stock intercooler.\u003c\/p\u003e\n\u003cp\u003eThe aluminum cast endtanks were designed in CAD and optimized in CFD simulations for an ideal internal airflow, which gives excellent cooling with a minimal back pressure. The newly developed performance core gives the adjoining components, for example the watercooler, enough air flow by using a specially prepared air baffle, which is why Wagner calls the kit perfect for racing use: an optimal cooling effect of the charged air with a significant increase in performance. An anti-corrosion powder coating with perfect heat-conducting properties protects the intercooler from all environmental influences, so a lasting and optimal cooling effect can be guaranteed. Wagner says all its products are subject to a continuous quality monitoring.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with a full Aero Guide which helps bring even more cold air into the large intercooler core. Wagner Tuning thought of everything with this kit, with the highest level of engineering available (CAD Design, 3D Scanning, pressure drop vs oem, temp probes on the Turbo and Intercooler).\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompetition core (tube fin), stepped: 580 mm x 120 mm x 150 mm + 580 mm x 62 mm x 70 mm\u003c\/li\u003e\n\u003cli\u003eStepped core volume: 12.96 liters \/ 790.87Inch³\u003c\/li\u003e\n\u003cli\u003e60% larger frontal surface and 118% more core volume than the stock intercooler\u003c\/li\u003e\n\u003cli\u003eInlet diameter: Ø65 mm; outlet diameter: Ø65 mm\u003c\/li\u003e\n\u003cli\u003eDetails stock intercooler: V = 5.94 L \/ 362.48Inch³; A = 660 cm² \/ 102.3Inch²\u003c\/li\u003e\n\u003cli\u003eDetails WAGNERTUNING intercooler: V = 12.96 L \/ 790.87Inch³ (+118%); A = 1055 cm² \/ 163.53Inch² (+60%)\u003c\/li\u003e\n\u003cli\u003eBeats our own V2.2 FMIC kit by 7 degrees; zero sign of heat soak, even on a 300whp bigger turbo 1.6T\u003c\/li\u003e\n\u003cli\u003e25whp-30whp on a tuned vehicle; 10whp+ on an OEM tuned vehicle\u003c\/li\u003e\n\u003cli\u003eFull Aero Guide to bring even more cold air into the core\u003c\/li\u003e\n\u003cli\u003eKit includes half the Hot Pipe (up-sized to 2.5\" to the inlet of the intercooler) and the correct sized coupler for the OEM Cold Pipe\u003c\/li\u003e\n\u003cli\u003eAnti-corrosion powder coating with heat-conducting properties\u003c\/li\u003e\n\u003cli\u003eMade In Germany\u003c\/li\u003e\n\u003cli\u003eThis kit comes with: 1 intercooler, 2 silicone hoses (black), 1 air baffle, 1 mounting material, 1 installation instruction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_tV7mjJzuzN.png?v=1621053631\" alt=\"Wagner Tuning 1.6T-GDI intercooler kit: intercooler, black aero guide air baffle, two black silicone hoses and a bag of mounting hardware\" loading=\"lazy\" width=\"970\" height=\"499\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 1.6T.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe ensure the correct coupler for the correct car, so this kit is a direct replacement. The kit includes half the Hot Pipe (up-sized to 2.5\" to the inlet of the intercooler) and the correct sized coupler for the OEM Cold Pipe. The installation is done by replacing the original intercooler and is easy to perform (plug and play). We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/received_904297593648749.jpg?v=1621053631\" alt=\"Wagner Tuning intercooler fitted below the bumper beam with its black aero guide, front bumper removed\" loading=\"lazy\" width=\"4032\" height=\"3024\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWagner Tuning covers its intercoolers against material and manufacturing defects for 48 months from the original invoice date, once the intercooler is registered with Wagner using its serial number. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai\/KIA 1.6TGDI: Elantra Sport, Elantra GT N Line, Elantra GTS, Veloster Turbo 2, Forte GT and Forte5.\u003c\/p\u003e\n\u003ch3\u003eHow much power will it add?\u003c\/h3\u003e\n\u003cp\u003eIt will bolt on 25whp-30whp on a tuned vehicle. Expect 10whp+ on an OEM tuned vehicle.\u003c\/p\u003e\n\u003ch3\u003eIs it a direct replacement?\u003c\/h3\u003e\n\u003cp\u003eYes. We ensure the correct coupler for the correct car, and the kit includes half the Hot Pipe, up-sized to 2.5\" to the inlet of the intercooler, and the correct sized coupler for the OEM Cold Pipe.\u003c\/p\u003e\n\u003ch3\u003eHow does it compare with other intercoolers?\u003c\/h3\u003e\n\u003cp\u003eWe have logged it against other performance replacements, universal and direct fit, and it performs the best from all our data. It beats our own V2.2 FMIC kit by 7 degrees.\u003c\/p\u003e","brand":"Wagner","offers":[{"title":"1.6T","offer_id":37832592785594,"sku":"200001153","price":1269.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_ECz8WrIiJK.png?v=1621053631"},{"product_id":"n75-oil-catch-can-xl-bottom-only","title":"N75 Oil Catch Can XL Bottom ONLY","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the extended-capacity bottom reservoir only, not a complete kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e The N75 oil catch can. A universal catch-can part for owners who already run the N75 oil catch can kit and want more reservoir capacity; it replaces the standard bottom of the can. New buyers can start with the complete \u003ca href=\"https:\/\/n75motorsports.ca\/products\/copy-of-n75-engine-oil-catch-can-universal\"\u003eN75 Engine Oil Catch Can Universal\u003c\/a\u003e kit.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe XL bottom is the extended-capacity reservoir that replaces the standard bottom of the N75 oil catch can. It holds 2.5x the capacity of the original bottom, so you empty it less often. We built it because customers asked for more capacity.\u003c\/p\u003e\n\u003cp\u003eThis is the bottom reservoir only, for owners who already have the N75 oil catch can kit. It is not a complete catch can.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/inside_1a1ea378-1838-4977-9074-ee73291bc789.jpg?v=1609488115\" alt=\"Black XL bottom reservoir for the N75 oil catch can, open threaded end toward the camera\" loading=\"lazy\" width=\"519\" height=\"628\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eA tall, extended-capacity reservoir that takes the place of the standard bottom on the N75 oil catch can and holds 2.5x the capacity of the original bottom. Because the reservoir is tall, you unbolt the can to empty it rather than emptying it in place.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtended capacity: 2.5x the original N75 catch can bottom\u003c\/li\u003e\n\u003cli\u003eThe bottom reservoir only, for the existing N75 oil catch can kit\u003c\/li\u003e\n\u003cli\u003eUniversal catch-can part\u003c\/li\u003e\n\u003cli\u003eMounts on the driver side\u003c\/li\u003e\n\u003cli\u003eRecommended for use with an intake\u003c\/li\u003e\n\u003cli\u003eUnbolts to empty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Kit:\u003c\/strong\u003e Extended Capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThis is a universal catch-can part. It mounts on the driver side, and we recommend running it with an intake. Because the reservoir is tall, you unbolt the can to empty it rather than emptying it in place. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this a complete catch can kit?\u003c\/h3\u003e\n\u003cp\u003eNo. It is the extended-capacity bottom reservoir only, for owners who already have the N75 oil catch can kit. New buyers can start with the complete \u003ca href=\"https:\/\/n75motorsports.ca\/products\/copy-of-n75-engine-oil-catch-can-universal\"\u003eN75 Engine Oil Catch Can Universal\u003c\/a\u003e kit.\u003c\/p\u003e\n\u003ch3\u003eHow much more does it hold?\u003c\/h3\u003e\n\u003cp\u003eIt holds 2.5x the capacity of the original N75 catch can bottom.\u003c\/p\u003e\n\u003ch3\u003eHow do I empty it?\u003c\/h3\u003e\n\u003cp\u003eYou unbolt the can to empty it, as the reservoir is too tall to empty in place.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"Extended Capacity","offer_id":37835481415866,"sku":null,"price":99.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/inside_1a1ea378-1838-4977-9074-ee73291bc789.jpg?v=1609488115"},{"product_id":"extremeshield-1200-flexible-tubing","title":"ExtremeShield 1200 Flexible Tubing","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK IN ALL SIZES!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a slip-on cover: the pipe needs to be removed for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal. A slip-on heat sleeve for wires, hoses and cables, including coolant hoses, fuel lines, transmission lines, oil lines and AC lines. Vibrant Performance ExtremeShield 1200 Flexible Tubing, in sizes 1\/2\", 3\/4\", 1\", 1.25\" and 1.50\".\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eVibrant Performance ExtremeShield 1200 Flexible Tubing is a slip-on heat sleeve that is perfect for keeping your engine bay cool. Cover your coolant hoses with these and your engine bay temps will drop.\u003c\/p\u003e\n\u003cp\u003eIt is great for turbo replacements, coolant hose replacements, fuel lines, transmission lines and oil lines, and you can use it on your AC lines to increase your AC system's efficiency. The uses are endless for this product, and it is one we use on all our cars.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/25822_WEBL.jpg?v=1613595714\" alt=\"Vibrant Performance ExtremeShield 1200 flexible heat shield tubing, a silver aluminized sleeve laid flat\" loading=\"lazy\" width=\"700\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eExtremeShield Flexible Tubing has an aluminized heat shield laminated to tightly braided fiberglass insulation, which provides superior protection from radiant heat. It gives easy slip-on installation and outstanding protection for your wires, hoses and cables from temperatures up to 1200 deg F (650°C). This tubing is not expandable, so be sure to measure your application carefully.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProtects wires, hoses and cables from temperatures up to 1200 deg F (650°C)\u003c\/li\u003e\n\u003cli\u003eAluminized heat shield laminated to tightly braided fiberglass insulation\u003c\/li\u003e\n\u003cli\u003eSuperior protection from radiant heat\u003c\/li\u003e\n\u003cli\u003eEasy slip-on installation\u003c\/li\u003e\n\u003cli\u003eSleeve Length: 5 Feet\u003c\/li\u003e\n\u003cli\u003eAvailable in Silver Only\u003c\/li\u003e\n\u003cli\u003eNot expandable: measure your application carefully\u003c\/li\u003e\n\u003cli\u003eMade by Vibrant Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\", 3\/4\", 1\", 1.25\" or 1.50\". The tubing is not expandable, so measure your application carefully before you choose a size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThis is a slip-on cover, so the pipe needs to be removed for installation and the tubing slid over it. The tubing is not expandable, so be sure to measure your application carefully. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eVibrant Performance gives a limited warranty against defects in material and workmanship, with the coverage period set by product category. Original proof of purchase is required, labour is not covered, and use on a commercial vehicle voids the warranty. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDo I need to remove the line to fit it?\u003c\/h3\u003e\n\u003cp\u003eYes. This is a slip-on cover, so the pipe needs to be removed for installation.\u003c\/p\u003e\n\u003ch3\u003eWill it stretch over a bigger hose?\u003c\/h3\u003e\n\u003cp\u003eNo. This tubing is not expandable, so be sure to measure your application carefully.\u003c\/p\u003e\n\u003ch3\u003eHow much heat can it take?\u003c\/h3\u003e\n\u003cp\u003eIt protects wires, hoses and cables from temperatures up to 1200 deg F (650°C).\u003c\/p\u003e\n\u003ch3\u003eHow long is the sleeve?\u003c\/h3\u003e\n\u003cp\u003eThe Sleeve Length is 5 Feet, and it is Available in Silver Only.\u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"1\/2\"","offer_id":38107665793210,"sku":"VIB25820","price":16.99,"currency_code":"CAD","in_stock":true},{"title":"3\/4\"","offer_id":38107665825978,"sku":"VIB25821","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"1\"","offer_id":38107665858746,"sku":"VIB25822","price":25.99,"currency_code":"CAD","in_stock":true},{"title":"1.25\"","offer_id":38107665891514,"sku":"VIB25823","price":33.99,"currency_code":"CAD","in_stock":true},{"title":"1.50\"","offer_id":38107665924282,"sku":"VIB25824","price":36.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/25822_WEBL.jpg?v=1613595714"},{"product_id":"extremeshield-1400-flexible-reflective-wrap","title":"ExtremeShield 1400 Flexible Reflective Wrap","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK IN ALL SIZES! EXCEPT 1.50\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a wrap, which does not require removal of lines for installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal. A wrap-on heat sleeve for lines and hoses that can't be easily disassembled, including coolant hoses, fuel lines, transmission lines, oil lines, AC lines, wires and cables. Vibrant Performance ExtremeShield 1400 Flexible Reflective Wrap in 1\/2\", 3\/4\", 1\", 1.25\" and 1.50\" sizes.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eVibrant Performance ExtremeShield 1400 Flexible Reflective Wrap is perfect for keeping your engine bay cool. Cover your coolant hoses with these and your engine bay temps will drop. Because it is a wrap, the pipe does not need to be removed for installation.\u003c\/p\u003e\n\u003cp\u003eIt is great for turbo replacements, coolant hose replacements, fuel lines, transmission lines and oil lines, and you can use it on your AC lines to increase your AC system's efficiency. The uses are endless for this product, and it is one we use on all our cars.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/extreme.jpg?v=1613766264\" alt=\"Vibrant Performance ExtremeShield 1400 flexible reflective wrap, a silver aluminized fiberglass heat sleeve\" loading=\"lazy\" width=\"700\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThis aluminized fiberglass thermal wrap is designed for easy installation on lines and hoses that can't be easily disassembled. The pre-formed split tubing wraps around your components and is sealed with the included high temperature adhesive strip, providing protection from extreme temperatures (up to 1400 deg F, or 760°C). It is perfect for protecting wires, cables and hose lines from the damage that can be caused by exhaust pipes and other high heat sources.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProtection from extreme temperatures up to 1400 deg F (760°C)\u003c\/li\u003e\n\u003cli\u003eAluminized fiberglass thermal wrap\u003c\/li\u003e\n\u003cli\u003ePre-formed split tubing wraps around your components\u003c\/li\u003e\n\u003cli\u003eIncluded high temperature adhesive strip seals the wrap closed\u003c\/li\u003e\n\u003cli\u003eNo need to remove lines or hoses for installation\u003c\/li\u003e\n\u003cli\u003eProtects wires, cables and hose lines from exhaust pipes and other high heat sources\u003c\/li\u003e\n\u003cli\u003eSleeve Length: 4 Feet\u003c\/li\u003e\n\u003cli\u003eAvailable in Silver Only\u003c\/li\u003e\n\u003cli\u003eMade by Vibrant Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\", 3\/4\", 1\", 1.25\" or 1.50\". All sizes are in stock except 1.50\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eSimply wrap the pre-formed split tubing around your components and seal it with the included high temperature adhesive strip. The pipe does not need to be removed for installation, so the wrap suits lines and hoses that can't be easily disassembled. Vibrant notes that it can be cut to length with ordinary scissors. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eVibrant Performance gives a limited warranty against defects in material and workmanship, with the coverage period set by product category. Original proof of purchase is required, labour is not covered, and use on a commercial vehicle voids the warranty. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDo I need to remove the line to fit it?\u003c\/h3\u003e\n\u003cp\u003eNo. This is a wrap, so the pipe does not need to be removed for installation. Wrap the pre-formed split tubing around the line and seal it with the included high temperature adhesive strip.\u003c\/p\u003e\n\u003ch3\u003eHow much heat can it take?\u003c\/h3\u003e\n\u003cp\u003eIt provides protection from extreme temperatures up to 1400 deg F (760°C).\u003c\/p\u003e\n\u003ch3\u003eHow long is the sleeve?\u003c\/h3\u003e\n\u003cp\u003eThe Sleeve Length is 4 Feet, and it is Available in Silver Only.\u003c\/p\u003e\n\u003ch3\u003eWhich sizes are in stock?\u003c\/h3\u003e\n\u003cp\u003eAll sizes are in stock except 1.50\".\u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"1\/2\"","offer_id":38118030540986,"sku":null,"price":25.99,"currency_code":"CAD","in_stock":true},{"title":"3\/4\"","offer_id":38118030573754,"sku":null,"price":27.99,"currency_code":"CAD","in_stock":true},{"title":"1\"","offer_id":38118030606522,"sku":null,"price":33.99,"currency_code":"CAD","in_stock":true},{"title":"1.25\"","offer_id":38118030639290,"sku":null,"price":37.99,"currency_code":"CAD","in_stock":true},{"title":"1.50\"","offer_id":38118030672058,"sku":null,"price":44.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/extreme.jpg?v=1613766264"},{"product_id":"shark-sho-400hp-single-fogger-wet-nitrous-system-w-10lbs-tank","title":"Shark sho 400HP Single Fogger Wet Nitrous System","description":"\u003cp\u003e\u003cstrong\u003eSpecial order from NX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal single nozzle wet nitrous system for EFI (fuel injected) engines, designed for EFI racers with single nozzle limitations.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe Nitrous Express Shark SHO is a single fogger wet nitrous system designed for EFI racers with single nozzle limitations. The SHO has the highest horsepower output of any single nozzle nitrous system available: the SHO nozzle utilizes a .116 internal N2O passage that can produce up to 400 wheel horsepower, and the system includes jetting up to 400HP. From the highest flowing solenoids, to the patented SHO nozzle, and the billet aluminum Lightning bottle valve, this system screams nothing but quality.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20112-10_l.jpg?v=1618377168\" alt=\"Nitrous Express Shark SHO 400HP single fogger wet nitrous kit contents with bottle, Lightning solenoids, lines, switches and fittings\" loading=\"lazy\" width=\"670\" height=\"670\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_2otns1Py5s\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eNX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form, which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port, which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing, and they have CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.\u003c\/p\u003e\n\u003cp\u003eThe billet aluminum Lightning 500 bottle valve is packed with features, including two integrated gauge ports, a 5\/8 siphon tube, a large .500 orifice and an improved flow path with only one 45 degree turn. It looks great, flows great and weighs nearly one full pound less than NX's old style brass valve.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHighest horsepower output of any single nozzle nitrous system available\u003c\/li\u003e\n\u003cli\u003eSHO nozzle with a .116 internal N2O passage, capable of up to 400 wheel horsepower\u003c\/li\u003e\n\u003cli\u003eJetting included up to 400HP\u003c\/li\u003e\n\u003cli\u003eLightning series solenoids with an integrated purge port, CNC aluminum bodies and Carbon Fiber cans\u003c\/li\u003e\n\u003cli\u003eBillet aluminum Lightning 500 bottle valve: two integrated gauge ports, 5\/8 siphon tube, .500 orifice, one 45 degree turn\u003c\/li\u003e\n\u003cli\u003eIn the kit: a single SHO nozzle, nozzle mounting bung, Lightning series solenoids, stainless braided solenoid to nozzle lines, 15 Foot stainless braided nitrous feed line, 18in 4AN fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay and relay harness, stainless bottle brackets and a 10lb nitrous bottle with the Lightning bottle valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottle Size:\u003c\/strong\u003e 10LBS or 15LBS. The kit contents above describe the 10 lb bottle version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eA nitrous system has to be installed and tuned correctly to be safe. We recommend installation by a qualified technician and a tune that accounts for the nitrous. Contact us before ordering if you have questions about your setup.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eCovered by the manufacturer's warranty from Nitrous Express. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much power can it make?\u003c\/h3\u003e\n\u003cp\u003eThe SHO nozzle can produce up to 400 wheel horsepower, and the system includes jetting up to 400HP.\u003c\/p\u003e\n\u003ch3\u003eWhat bottle sizes are available?\u003c\/h3\u003e\n\u003cp\u003e10 lb or 15 lb.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from NX.\u003c\/p\u003e","brand":"Nitrous Express","offers":[{"title":"10LBS","offer_id":39526760808634,"sku":"NX20112-10","price":1169.99,"currency_code":"CAD","in_stock":true},{"title":"15LBS","offer_id":39526760841402,"sku":"NX20112-15","price":1299.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20112-10_l.jpg?v=1618377168"},{"product_id":"dei-ny-trex-efi-single-fogger-wet-nitrous-system","title":"DEI NY-TREX EFI Single Fogger Wet Nitrous System","description":"\u003cp\u003e\u003cstrong\u003eSpecial order from DEI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal. EFI wet nitrous system for 4, 6 and 8 cylinder engines, single fogger (single nozzle). 10 lb bottle.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe DEI Ny-Trex EFI single fogger wet nitrous system. Ny-trex is proud to offer the all new EFI 4, 6 and 8 cylinder wet nitrous systems. Ny-Trex EFI wet nitrous systems use only the highest quality materials and components to produce the best performing, best looking and most reliable wet system around.\u003c\/p\u003e\n\u003cp\u003eNy-Trex systems have been thoroughly dyno-tested on numerous vehicles to ensure the most safe and reliable performance possible.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dei-110012x.gif?v=1619327531\" alt=\"DEI Ny-Trex EFI single fogger wet nitrous kit with black bottle, braided stainless lines, solenoids, wiring, switches and mounting hardware\" loading=\"lazy\" width=\"504\" height=\"504\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe exclusive T-Rex Nozzle* with true-blend spray bowl delivers a swirl cone plume at a 110 degree angle to center the throttle body for an even blend. It flows up to 300+HP yet works great delivering only 35 HP. The nozzle has a unique faceted spray tip to pass air around the nozzle without disrupting the spray pattern. T-Rex is the highest flowing nozzle available, with .110 fuel and nitrous passages that can deliver over 300 hp with a single nozzle, and flow matched fittings allow for the use of any style flare jets that are currently used in the industry.\u003c\/p\u003e\n\u003cp\u003eSolenoid valves are made with Volt-Trap coils for stronger, more efficient power; this allows for a larger orifice and more flow, and they work with as low as 9 volts. Plungers are made of high grade alloy with greater tolerances to prevent sticking. The N2O seal is Teflon and a special Viton seal is used for fuel. Dual Taper Jets provide a consistent flow of nitrous and fuel and come in a large array of sizes.\u003c\/p\u003e\n\u003cp\u003e*Bare Bones Economy system uses the single Raptor Nozzle, not T-Rex Nozzle.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEFI wet nitrous system for 4, 6 and 8 cylinder engines\u003c\/li\u003e\n\u003cli\u003eThoroughly dyno-tested on numerous vehicles\u003c\/li\u003e\n\u003cli\u003eExclusive T-Rex Nozzle*: flows up to 300+HP yet works great delivering only 35 HP\u003c\/li\u003e\n\u003cli\u003e.110 fuel and nitrous passages that can deliver over 300 hp with a single nozzle\u003c\/li\u003e\n\u003cli\u003eTrue-blend spray bowl: swirl cone plume at a 110 degree angle to center the throttle body\u003c\/li\u003e\n\u003cli\u003eFlow matched fittings for any style flare jets currently used in the industry\u003c\/li\u003e\n\u003cli\u003eVolt-Trap solenoid coils; works with as low as 9 volts\u003c\/li\u003e\n\u003cli\u003eHigh grade alloy plungers with a Teflon N2O seal and a Viton fuel seal\u003c\/li\u003e\n\u003cli\u003eDual Taper Jets in a large array of sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Systems Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 lb Wet-Black powder coated bottle\u003c\/li\u003e\n\u003cli\u003eChrome Hi-Flo 660 bottle valve with gauge port\u003c\/li\u003e\n\u003cli\u003eBraided stainless N2O feed line w\/Teflon core\u003c\/li\u003e\n\u003cli\u003eT-Rex Nozzle* \u0026amp; adapter (up to 300+HP)\u003c\/li\u003e\n\u003cli\u003eAdjustable HP jetting\u003c\/li\u003e\n\u003cli\u003e15A WOT micro switch\u003c\/li\u003e\n\u003cli\u003eQuick-Clamp stainless bottle brackets\u003c\/li\u003e\n\u003cli\u003eMounting hardware, brackets, bolts, screws, clamps, ties\u003c\/li\u003e\n\u003cli\u003eElectrical components, wire connectors, relays, switches\u003c\/li\u003e\n\u003cli\u003e22\"x-3 braided stainless nozzle lines, 1 blue, 1 red\u003c\/li\u003e\n\u003cli\u003eDrill \u0026amp; tap, fittings, sealant\u003c\/li\u003e\n\u003cli\u003eHot-Shot N2O \u0026amp; fuel valves\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on solenoids\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottle Size:\u003c\/strong\u003e 10LBS: the 10 lb Wet-Black powder coated bottle listed above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe system comes with easy install components such as well nuts to install the bottle topside, a drill bit and tap for the fuel connection, Teflon sealant and an easy install Quick-Guide. We recommend installation by a qualified technician. Contact us before ordering if you have questions about your setup.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eLifetime warranty on solenoids. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much power can it make?\u003c\/h3\u003e\n\u003cp\u003eThe T-Rex Nozzle flows up to 300+HP and can deliver over 300 hp with a single nozzle, yet works great delivering only 35 HP. The kit includes adjustable HP jetting.\u003c\/p\u003e\n\u003ch3\u003eWhich engines is it for?\u003c\/h3\u003e\n\u003cp\u003eEFI 4, 6 and 8 cylinder engines.\u003c\/p\u003e\n\u003ch3\u003eWhat bottle comes with it?\u003c\/h3\u003e\n\u003cp\u003eA 10 lb Wet-Black powder coated bottle with a Chrome Hi-Flo 660 bottle valve with gauge port.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from DEI.\u003c\/p\u003e","brand":"DEI","offers":[{"title":"10LBS","offer_id":39581133471930,"sku":"DEI110012","price":939.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dei-110012x.gif?v=1619327531"},{"product_id":"1-8t-2-0t-2-5t-fsi-tsi-dv-diverter-valve-t9351","title":"1.8T\/2.0T\/2.5T FSi \/ TSi DV+ Diverter Valve T9351","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGFB's warning: BEWARE of counterfeit products; ONLY buy from authorized dealers listed on GFB's website.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Late-model VAG and Euro applications with the 1.8T, 2.0T and 2.5T FSi \/ TSi engines, as a direct-fit replacement for the factory solenoid diverter valve. GFB part number T9351. GFB lists the T9351 for a long list of Audi, VW, Skoda and Porsche applications with 1.4 to 2.5 litre TFSI\/TSI engines, including the VW Golf GTI, Audi TT RS and RS3 (2.5 TFSI), Skoda Octavia RS and Porsche Macan 2.0. GFB's kit diagram notes the DV+ works with the existing revision C, D and G factory solenoids. Contact us with your vehicle before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eIntroducing the DV+ for late-model VAG and Euro applications. GFB's DV+ solution couldn't be simpler: keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.\u003c\/p\u003e\n\u003cp\u003eThe solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve, so why replace it?), but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodised billet aluminium housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story below.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_D63rdH570o.png?v=1623358391\" alt=\"GFB DV+ T9351 diverter valve for VAG 1.8T, 2.0T and 2.5T engines, black anodised billet housing with brass piston\" loading=\"lazy\" width=\"927\" height=\"807\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe DV+ story: better performance, more reliable.\u003c\/strong\u003e Many late-model European cars use ECU controlled solenoid-type diverter valves. This is a good concept because the valve can react very quickly and it only opens when it needs to. However, there are some problems with these valves. There are typically two types of solenoid-actuated diverter valves found standard on VAG and European cars, both of which have their shortcomings.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/gfb.com.au\/wp-content\/uploads\/2018\/11\/Exploded_view_labels_snagit.jpg\" alt=\"GFB DV+ kit contents, exploded view: brass piston with bonded silicone face seal, piston spring, O-ring, anodised billet body, solenoid plunger with silicone O-ring seal, plunger spring and extended bolts, shown with the re-used factory solenoid coil\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon OE Problem #1:\u003c\/strong\u003e The diaphragm types are commonly known to rupture, especially when boost and temperature are increased as a result of chip tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/gfb.com.au\/wp-content\/uploads\/2018\/11\/part1.jpg\" alt=\"Factory diaphragm-type diverter valve, common OE problem 1\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon OE Problem #2:\u003c\/strong\u003e The plastic piston-type leaks far more than most people realise (by design, not from wear), and doesn't always close after a high-boost gear shift.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/gfb.com.au\/wp-content\/uploads\/2018\/11\/part2.jpg\" alt=\"Factory plastic piston-type diverter valve, common OE problem 2\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdditionally, in both cases, the solenoid on the OE diverter is directly connected to the valve mechanism, which is not ideal because neither it nor the return spring are strong enough to open and close the valve reliably at high boost.\u003c\/p\u003e\n\u003cp\u003eThe DV+ addresses the factory valve problems with a very simple and elegant solution. Keeping the factory solenoid retains all the benefits of the stock system, and replacing the valve parts with indestructible metal components ensures strength and reliability no matter how much boost you run. That's not all: rather than using the solenoid to directly actuate the valve, GFB has introduced a unique \"pilot-actuation\" system. This means the solenoid controls the air pressure that is used to open and close the piston, so it doesn't matter how much boost you push through it, the DV+ will open and close reliably without ever exceeding the solenoid's capability. This feature also improves on the factory system by opening the valve progressively in response to boost pressure, so it only opens as much as required to get the job done (the factory valve simply opens and shuts; it cannot partially open if boost pressure is low), resulting in better throttle response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnnecessary replacement kits are a compromise, not a solution.\u003c\/strong\u003e Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus either a different solenoid valve to actuate the pneumatic valve or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. With problems like the factory valve's, you can see why other aftermarket manufacturers assume the best solution is to replace the factory diverter entirely. Unfortunately though, whilst their replacement kits might be stronger than the factory diverter, their slower response speed and lower flow do not justify the extra cost and complexity: more of a compromise than a solution. GFB has taken a different approach to deliver a complete solution that solves existing problems and improves performance, without compromise or a hefty price tag. GFB's DV+ solution is more responsive, less expensive, easier to install, and doesn't cause compressor surge\/turbo flutter. Oh, and it doesn't require different springs or frequent re-builds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/gfb.com.au\/wp-content\/uploads\/2018\/11\/feature-6.jpg\" alt=\"GFB graphic crossing out the extra hoses, wiring, solenoids and fittings that full replacement diverter valve kits need\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetains the factory solenoid coil for seamless integration\u003c\/li\u003e\n\u003cli\u003eReplaces plastic valve parts with metal for reliability and strength on chipped engines\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement with GFB's TMS benefits\u003c\/li\u003e\n\u003cli\u003eExclusive \"pilot-actuated\" valve mechanism for rapid response at high boost\u003c\/li\u003e\n\u003cli\u003eAnodised billet aluminium housing fitted with a brass piston machined to exacting tolerances\u003c\/li\u003e\n\u003cli\u003eOpens progressively in response to boost pressure, for better throttle response\u003c\/li\u003e\n\u003cli\u003eSharper throttle response, lightning-fast valve actuation, and holds as much boost as you can throw at it\u003c\/li\u003e\n\u003cli\u003eDoesn't cause compressor surge\/turbo flutter, and doesn't require different springs or frequent re-builds\u003c\/li\u003e\n\u003cli\u003eProtected by Patents and Design Patents in the U.S.A, Australia and China; PCT Patents Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe DV+ is a direct-fit replacement: it keeps the factory solenoid coil and replaces only the valve parts, so there are no long vacuum hose runs, no tapping into the intake manifold vacuum and no extra solenoid valve or ballast resistor. GFB's kit diagram shows the factory solenoid coil and its yellow O-ring are re-used (not included). We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGFB (Go Fast Bits) gives the original owner a limited lifetime warranty against defective materials or faulty workmanship; register the product on GFB's website to activate it. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDo I keep my factory solenoid?\u003c\/h3\u003e\n\u003cp\u003eYes. The DV+ retains the factory solenoid coil and replaces just the valve parts with an anodised billet aluminium housing and a brass piston.\u003c\/p\u003e\n\u003ch3\u003eWill it hold boost on a chipped engine?\u003c\/h3\u003e\n\u003cp\u003eYes. Its metal valve parts are there for reliability and strength on chipped engines, and the pilot-actuation system lets it open and close reliably no matter how much boost you push through it.\u003c\/p\u003e\n\u003ch3\u003eWhy not replace the whole diverter valve?\u003c\/h3\u003e\n\u003cp\u003eFull replacement kits need long vacuum hose runs, extra parts, and a different solenoid valve or a ballast resistor, which makes them slower, less responsive, more expensive and longer to install. GFB calls them a compromise, not a solution.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eFREE SHIPPING TO CANADA AND USA.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"Default Title","offer_id":39861584199866,"sku":"GFB-T9351","price":149.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_D63rdH570o.png?v=1623358391"},{"product_id":"carbon-fiber-engine-cover-n","title":"Forge Carbon Fiber Engine Cover - Veloster N \/ Elantra N \/ Kona N","description":"\u003cp\u003e\u003cstrong\u003e1 Unit in shipping to us!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese covers have a protective film to protect against yellowing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra N, Kona N and Veloster N. Forge presents it as its carbon fibre engine cover for the Hyundai i30N, and its compatibility list names the i30 N Mk3 2017-2020 (including Fastback) and Mk3.5 2021- facelift and the Veloster N 2019-2020 (pre-facelift) and 2021- (facelift).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eForge Motorsport's carbon fibre engine cover, which Forge presents as its engine cover for the Hyundai i30N. It is designed to locate in the OEM factory position and fits perfectly with the Forge \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003eintake\u003c\/a\u003e. The engine oil cap will relocate perfectly, or you can upgrade to the CNC billet \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003eForge oil cap\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_aFzHBEZxxu.png?v=1623400600\" alt=\"Forge carbon fibre engine cover for the Hyundai Veloster N, Elantra N and Kona N, front three-quarter view\" loading=\"lazy\" width=\"846\" height=\"606\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe cover is manufactured by an autoclave process using a vacuum (also known as liquid infusion) to draw the resin through the mould, then pulling the raw carbon fibre cloth to the mould shape. This involves the use of up to 10BAR of pressure that is blown into a 100% billet mould to force the material out. This high amount of pressure ensures the carbon fibre is fully in contact with the surface of the mould, making sure the weave is tight, solid and strong; this process will also ensure there are no imperfections in the product.\u003c\/p\u003e\n\u003cp\u003eIt is finished in high quality clear coat to ensure UV-protection and extra durability, and these covers have a protective film to protect against yellowing. In line with Forge's policy to constantly review, revise, and improve its product range, the appearance of the product you receive may differ from the one advertised.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/FMEC1-i30N-EngineCoverBadge_WEB.jpg\" alt=\"Forge Motorsport badge on the carbon fibre engine cover: Engineered for Performance, Made in Great Britain\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fibre made by an autoclave process using a vacuum (liquid infusion), with up to 10BAR of pressure in a 100% billet mould\u003c\/li\u003e\n\u003cli\u003eTight, solid and strong weave with no imperfections\u003c\/li\u003e\n\u003cli\u003eDesigned to locate in the OEM factory position\u003c\/li\u003e\n\u003cli\u003eFits perfectly with the Forge intake\u003c\/li\u003e\n\u003cli\u003eThe engine oil cap will relocate perfectly, or upgrade to the CNC billet Forge oil cap\u003c\/li\u003e\n\u003cli\u003eFinished in high quality clear coat to ensure UV-protection and extra durability\u003c\/li\u003e\n\u003cli\u003eProtective film to protect against yellowing\u003c\/li\u003e\n\u003cli\u003eIn the Box: 1 x Forge Motorsport Hyundai i30N Carbon Engine Cover, 1 x Forge Motorsport \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.forgemotorsport.co.uk\/Vinyl_Forge_Logo_Stickers_x3--product--892.html\" target=\"_blank\"\u003eDecal\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_CZKG7rB0B3.png?v=1623400600\" alt=\"Forge carbon fibre engine cover, side view showing the oil cap opening and the Forge badge\" loading=\"lazy\" width=\"807\" height=\"590\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe cover is designed to locate in the OEM factory position. The engine oil cap will relocate perfectly, or you can upgrade to the CNC billet Forge oil cap. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Products\/FMEC1\/FMEC1-i30N-EngineCover-Fitted2_WEB.jpg\" alt=\"Forge carbon fibre engine cover fitted in a Hyundai i30N engine bay\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Products\/FMEC1\/FMEC1-i30N-EngineCover-Fitted1_WEB.jpg\" alt=\"Forge carbon fibre engine cover fitted in a Hyundai i30N engine bay with blue Forge silicone hoses\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eThe Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certain applications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre. Unfortunately, due to this harsh and extreme environment, your Forge carbon fibre is not warrantied for that eventuality. For the Hyundai engine cover applications, Forge would recommend considering this modification solely for show use, as it will discolour from heat due to the location of the turbo charger. All other aspects of your carbon fibre products are covered by Forge's \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.forgemotorsport.co.uk\/Terms_and_Conditions_UK.html\" target=\"_blank\"\u003ewarranty process.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eContact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill the carbon discolour?\u003c\/h3\u003e\n\u003cp\u003eIt can. In areas of extreme temperature, carbon fibre can discolour or fade (yellowing), and Forge recommends considering this cover solely for show use on the Hyundai, as it will discolour from heat due to the location of the turbo charger. These covers have a protective film to protect against yellowing.\u003c\/p\u003e\n\u003ch3\u003eCan I keep my oil cap?\u003c\/h3\u003e\n\u003cp\u003eYes. The engine oil cap will relocate perfectly, or you can upgrade to the CNC billet Forge oil cap.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the box?\u003c\/h3\u003e\n\u003cp\u003e1 x Forge Motorsport Hyundai i30N Carbon Engine Cover and 1 x Forge Motorsport Decal.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003e1 unit is in shipping to us.\u003c\/p\u003e","brand":"Forge","offers":[{"title":"Default Title","offer_id":39864286675130,"sku":"FMEC1","price":899.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_aFzHBEZxxu.png?v=1623400600"},{"product_id":"engine-oil-catch-can-for-veloster-n","title":"Engine Oil Catch Can \/ Expansion Tank","description":"\u003cp\u003e\u003cstrong\u003eOn Order\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Veloster N, Kona N and i30N, as a direct replacement for the OE coolant expansion tank. Forge lists this tank for the Veloster N 2019-2020 T-GDI (pre-facelift) and 2021- (facelift), the Kona N, and the i30 N Mk3 2017-2020 (including Fastback) and Mk3.5 2021- facelift.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThis is Forge's twin catch can and coolant expansion tank system, a direct replacement for the OE coolant expansion tank. This design has been subject to a vast amount of development and is a one of a kind product in the marketplace.\u003c\/p\u003e\n\u003cp\u003eThe twin catch can system is the definitive solution to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product, and one Forge recommends particularly if you are planning more advanced power tuning in the future.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Products\/FMCT5\/FMCT5-AssembledCap_WEB.jpg\" alt=\"Forge machined cap cover fitted over the OEM cap on the black twin catch can and expansion tank\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe CAD laser cut alloy construction is skilfully welded at Forge UK HQ. The expansion tank has a level indicator inside the filler neck to make topping up easier, and Forge has also machined a cap cover that slots over the top of the OEM cap to add to the premium look.\u003c\/p\u003e\n\u003cp\u003eThe system filters both PCV and intake breather systems to help keep your engine clean from harmful contaminants, including oil deposits, unused fuel vapours and moisture, which would ordinarily make their way back through to the inlet of the engine. All of this is now collected in the catch cans.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Products\/FMCT5\/FMCT5-DESC-Hoses.jpg\" alt=\"Forge twin catch can and expansion tank with its black braided hoses fitted\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThere is a dip stick for each tank to measure the amount of deposit caught. This opening can also be used to pump out the captured contaminants, or alternately you can use the drain plugs at the bottom of the tanks.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Products\/FMCT5\/FMCT5-DESC-DrainPlugs.jpg\" alt=\"Side of the Forge tank with its mounting bracket and a drain plug at the bottom\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eAs with all Forge Motorsport products, Forge has used superior braided hoses which are internally constructed from anti-static smooth fuel resistant nitrile rubber. This is combined with an outer cover made from reinforced stainless-steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. Forge developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range: -54°C to +150°C (-65°F to 300°F).\u003c\/p\u003e\n\u003cp\u003eForge makes it in a raw aluminium finish or its stealthy textured black powder coat finish. In line with Forge's policy to constantly review, revise, and improve its product range, the appearance of the product you receive may differ from the one advertised.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA drain plug for ease of emptying\u003c\/li\u003e\n\u003cli\u003eCoolant level indicator\u003c\/li\u003e\n\u003cli\u003eIntegrated dipsticks for simple level inspection\u003c\/li\u003e\n\u003cli\u003eCNC machined anodised coolant cap cover\u003c\/li\u003e\n\u003cli\u003ePremium Quality stainless steel reinforced oil resistant hoses with black external braiding\u003c\/li\u003e\n\u003cli\u003eInner tube is constructed from anti-static smooth fuel resistant nitrile rubber\u003c\/li\u003e\n\u003cli\u003eOuter cover is constructed from reinforced Stainless-Steel wire braid consisting of partial inner braid \u0026amp; full cover outer braiding which is resistant to pressure expansion and vacuum collapse\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -54°C to +150°C (-65°F to 300°F)\u003c\/li\u003e\n\u003cli\u003eFilters both PCV and intake breather systems\u003c\/li\u003e\n\u003cli\u003eThe engine cover can still be fitted after installation\u003c\/li\u003e\n\u003cli\u003eInstallation is straight forward with all necessary fittings and Forge detailed instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Products\/FMCT5\/FMCT5-Kit-Angled_DESC.jpg\" alt=\"Forge kit laid out: twin catch can and expansion tank, black braided hoses, cap cover and fittings\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eIt is a direct replacement for the OE coolant expansion tank. Installation is straight forward with all necessary fittings and Forge detailed instructions included, and the engine cover can still be fitted after installation. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_nL1BZ3yOh1.png?v=1623401231\" alt=\"Forge small parts: machined Forge cap cover, two dipsticks, alloy fittings, bracket, grommet, bolts and washers\" loading=\"lazy\" width=\"921\" height=\"548\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eForge Motorsport gives the original purchaser a limited lifetime warranty against manufacturing defects, for the life of the product, when it is bought from Forge or an authorized dealer and left unmodified. Powder-coated or anodised finishes and cosmetic marks are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai Veloster N, Kona N and i30N. Forge lists the Veloster N 2019-2020 (pre-facelift) and 2021- (facelift), the Kona N, and the i30 N Mk3 and Mk3.5.\u003c\/p\u003e\n\u003ch3\u003eHow do I empty the catch cans?\u003c\/h3\u003e\n\u003cp\u003eThere is a dip stick for each tank to measure the amount of deposit caught. That opening can also be used to pump out the captured contaminants, or you can use the drain plugs at the bottom of the tanks.\u003c\/p\u003e\n\u003ch3\u003eCan I still fit the engine cover?\u003c\/h3\u003e\n\u003cp\u003eYes. The engine cover can still be fitted after installation.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is on order.\u003c\/p\u003e","brand":"Forge","offers":[{"title":"Default Title","offer_id":39864321966266,"sku":"FMCT5","price":620.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_tXSPtrSXvC.png?v=1623401231"},{"product_id":"short-and-side-shifter-for-i30n-vn","title":"Short and Side Shifter for i30N \/ Veloster N \/ Elantra N","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai i30N, Veloster N and New Elantra N. Forge lists it for the Veloster N 2019-2020 (pre-facelift) and 2021- (facelift), the Elantra N 2022-2024 (pre-facelift) and 2024- (facelift), and the i30 N Mk3 2017-2020 (including Fastback) and Mk3.5 2021- facelift.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eForge's short shifter and side shifter set for the Hyundai i30N, Veloster N and New Elantra N. The i30N and Veloster N are both a very sporty hot hatch, but the sporty feel can be let down by the amount of travel in the gear stick. This short\/quick shifter set has been developed by Forge to offer a short, crisp, and precise gear changing experience.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_fPKassQif8.png?v=1625724903\" alt=\"Forge short shifter lever and side shifter lever in black, with the long pin, short pin and two M8 nyloc nuts\" loading=\"lazy\" width=\"1004\" height=\"678\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe set is designed with black stealth OEM styling and simple adjustability to suit the individual's driving needs. The horizontal and vertical travel between gears can be set to standard or reduced by any amount up to approximately 50%.\u003c\/p\u003e\n\u003cp\u003eIn line with Forge's policy to constantly review, revise, and improve its product range, the appearance of the product you receive may differ from the one advertised.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShort shifter lever and side shifter lever set\u003c\/li\u003e\n\u003cli\u003eHorizontal and vertical travel between gears can be set to standard or reduced by any amount up to approximately 50%\u003c\/li\u003e\n\u003cli\u003eBlack stealth OEM styling\u003c\/li\u003e\n\u003cli\u003eSimple adjustability to suit the individual's driving needs\u003c\/li\u003e\n\u003cli\u003eIn The Box: 1 x Short Shifter Lever, 1 x Side Shifter Lever, 1 x Long Pin, 1 x Short Pin, 2 x M8 Nyloc Nuts, 1 x Instructions, 1 x Forge Sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_FssWqanuLr.png?v=1625724903\" alt=\"Forge short shifter and side shifter levers shown together, with their splined bores and pins fitted\" loading=\"lazy\" width=\"1000\" height=\"676\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eForge supplies instructions in the box and has made video instructions and an unboxing video, both below. Forge rates the install Level 2: intermediate install. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForge's video instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/etrJbMyjiFc\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForge's unboxing video:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/xV1bDSKPTCk\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Install%20Levels\/5.jpg\" alt=\"Forge install difficulty rating: Level 2, intermediate install\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_yoT39hgGO1.png?v=1625724903\" alt=\"Forge short shifter set: both levers with the long and short pins and nyloc nuts\" loading=\"lazy\" width=\"1003\" height=\"678\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eForge Motorsport gives the original purchaser a limited lifetime warranty against manufacturing defects, for the life of the product, when it is bought from Forge or an authorized dealer and left unmodified. Anodised, powder-coated or plated finishes and cosmetic marks are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much shorter is the throw?\u003c\/h3\u003e\n\u003cp\u003eThe horizontal and vertical travel between gears can be set to standard or reduced by any amount up to approximately 50%.\u003c\/p\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai i30N, Veloster N and New Elantra N.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the box?\u003c\/h3\u003e\n\u003cp\u003e1 x Short Shifter Lever, 1 x Side Shifter Lever, 1 x Long Pin, 1 x Short Pin, 2 x M8 Nyloc Nuts, 1 x Instructions and 1 x Forge Sticker.\u003c\/p\u003e","brand":"Forge","offers":[{"title":"Default Title","offer_id":40038572523706,"sku":"FMSS3","price":279.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_fPKassQif8.png?v=1625724903"},{"product_id":"upgraded-hpfp-high-pressure-fuel-pump-veloster-n","title":"Upgraded HPFP (High Pressure Fuel Pump) Veloster N \/ I30N \/ Kona N \/ Elantra N","description":"\u003cp\u003e\u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Veloster N, I30N, Kona N and Elantra N. A direct replacement HPFP (high pressure fuel pump).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAn upgraded HPFP (high pressure fuel pump) for the N cars. Did you hit the limit of the OEM fuel pressure pump? Having extended start issues? Rough idle? The HPFP on the Veloster N and I30N is a known issue, and many people have been left stranded by the OEM fuel pump. This is our solution: we have tested this HPFP on stuffed turbo setups without issue, and we have proven this pump will solve your fuel pump issues on the Veloster \/ I30 N models. We suggest a HPFP before ECU tuning. While warranty will cover a replacement, they will just use the same pump known to cause issues. This pump will fix all your HPFP problems.\u003c\/p\u003e\n\u003cp\u003eThis is not the Hyundai Motorsport HPFP. However, we tested this pump with many setups, and not a single setup had fueling issues, including a stuffed turbo Veloster N and a big turbo Veloster N. It is a brand new part, the same type of pump used by Hyundai on their projects 2.0Ts. We use this pump on our project Veloster N and Elantra N.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_M7jx9BRL7n.png?v=1634698122\" alt=\"Upgraded high pressure fuel pump (HPFP) for the Hyundai 2.0T N engine, with mounting flange and electrical connector\" loading=\"lazy\" width=\"688\" height=\"602\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThis is a direct replacement HPFP, which is needed when pushing the limits of a FBO VN and higher boost levels 22+PSI. This pump will keep enough fuel flowing to the engine even with a big turbo: it is strong enough to keep enough fuel flowing without hitting the limit on a big turbo Veloster N, and it holds fuel pressure steady at wide open throttle, even at E40 and over 450whp (proper tuning required).\u003c\/p\u003e\n\u003cp\u003eAs you can see from the graph below, fuel rail pressure stays consistent on this HPFP, where the OEM would dip. The way the engine starts, idles, everything is better on this stronger pump.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRated to 400whp (can make more, we have made 455whp) if tuned correctly\u003c\/li\u003e\n\u003cli\u003eThis pump is all you need to reach 400whp\u003c\/li\u003e\n\u003cli\u003eMultiple customers have dyno'd over 320WHP on this HPFP, even 1 at over 400WHP, another at 350WHP and 400WTQ, and another at 360WHP and 360WTQ, so we are confident it will solve your issue\u003c\/li\u003e\n\u003cli\u003eWe also suggest a fuel injectors upgrade: the combo has made 455whp on our tuning and E blend\u003c\/li\u003e\n\u003cli\u003eHolds fuel pressure steady at wide open throttle, even at E40 and over 450whp (proper tuning required)\u003c\/li\u003e\n\u003cli\u003eFuel rail pressure stays consistent, where the OEM pump would dip\u003c\/li\u003e\n\u003cli\u003eDirect replacement; perfectly suited for all N's, from no mods, to FBO car or stuffed turbo car\u003c\/li\u003e\n\u003cli\u003eOur customers run it without issue on everything from FBO JB4 to Lap3 big turbo kit to Elantra Turbo to our own Stuffed turbo, and from FBO ECU tune to FBO no ECU tune. Basically every setup you can think of, this pump has powered without issue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ApplicationFrameHost_knJmNWp9tF.png?v=1665866342\" alt=\"Datalog graph showing fuel rail pressure with the upgraded HPFP\" loading=\"lazy\" width=\"1876\" height=\"627\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd HPFP Line to Rail:\u003c\/strong\u003e No or Yes. Choose Yes to add the HPFP line to the rail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThis pump does not require tuning, and many owners buy this pump to avoid OEM pump issues with no mods. Make no mistake about it, though: the HPFP requires tuning, and if your tune is bad you will get cuts on ANY HPFP.\u003c\/p\u003e\n\u003cp\u003eN75 Motorsports recommends pump replacement before tuning to ensure tune safety, unless running a low boost Stage 1 tune. This is due to the extremely weak HPFP from factory: the HPFP has been known to fail on the OEM tune, and on a high boost tune we see it as absolutely a necessity. We change the way the HPFP acts within the tune even on an OEM pump; however, this is again for tune safety. We highly suggest ECU tuning with this pump, but it is not required.\u003c\/p\u003e\n\u003cp\u003eWe are well aware tuners are tuning these cars on bigger turbos with the OEM fuel pump, but we ask: what happens when you're doing a pull and the HPFP decides it's time to check out? You run lean and risk the possibility of engine damage. Why? We spend good money on our cars, doing mods and tunes, so why cheap out on a part which is extremely important to your engine's longevity? We can extremely lift the HPFP pump maps in the ECU and send you on your way with the OEM pump, but why, when there is a solution available which is not only a direct replacement, but will directly add performance to the engine? In the 1.6T community we tell everyone EBCS is required; sadly the 2.0T platform requires a part which is more expensive, but no matter how we look at it, we see this as a requirement to avoid issues. Now when we talk about tuning, this is a no brainer. Data is available of the OEM crashing under high boost. Can it be tuned out? Sure, but why would you try to tune out a well known issue? The safety of your engine is most important to us. This is why we own development cars.\u003c\/p\u003e\n\u003cp\u003ePlease note fuel injectors on this platform are also becoming an issue; this is due to the design of the injectors. If you have fuel cuts after this pump, more than likely your injectors should be replaced or upgraded. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes this pump need a tune?\u003c\/h3\u003e\n\u003cp\u003eThis pump does not require tuning, and many owners buy it to avoid OEM pump issues with no mods. We highly suggest ECU tuning with this pump, but it is not required. N75 Motorsports recommends pump replacement before tuning to ensure tune safety, unless running a low boost Stage 1 tune.\u003c\/p\u003e\n\u003ch3\u003eIs this the Hyundai Motorsport HPFP?\u003c\/h3\u003e\n\u003cp\u003eNo. However, we tested this pump with many setups, and not a single setup had fueling issues, including a stuffed turbo Veloster N and a big turbo Veloster N.\u003c\/p\u003e\n\u003ch3\u003eI still have fuel cuts after fitting it. What next?\u003c\/h3\u003e\n\u003cp\u003eFuel injectors on this platform are also becoming an issue. If you have fuel cuts after this pump, more than likely your injectors should be replaced or upgraded.\u003c\/p\u003e\n\u003ch3\u003eWhere does it ship?\u003c\/h3\u003e\n\u003cp\u003eFree shipping within Canada. Ships to all US States, and all international countries.\u003c\/p\u003e","brand":"Hyundai","offers":[{"title":"No","offer_id":44175669788858,"sku":"35320-2GTA0-1","price":695.0,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":44175669821626,"sku":"353052GPD0","price":765.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_M7jx9BRL7n.png?v=1634698122"},{"product_id":"universal-intercooler-30w-x-9-25h-x-3-25-thick","title":"Universal Intercooler, 30\"W x 9.25\"H x 3.25\" Thick","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfectly suited for custom universal intercooler setups on the 1.6T and 2.0T platform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal air to air intercooler for custom intercooler setups, perfectly suited to the 1.6T and 2.0T platform. Vibrant Performance part number 12810.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA universal air to air intercooler from Vibrant Performance, perfectly suited for custom universal intercooler setups on the 1.6T and 2.0T platform. The core is 22\" wide, 9.25\" high and 3.25\" thick, with 2.50\" inlet and outlet necks, and the approximate HP rating for this intercooler is 550 HP.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_T8Fh1Ay0GA.png?v=1639382289\" alt=\"Vibrant Performance 12810 universal air to air intercooler, 30 inch wide raw aluminum bar and plate core with offset 2.5 inch inlet and outlet\" loading=\"lazy\" width=\"882\" height=\"513\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eBar and Plate Construction. The core measures 22\" wide (30\" overall width with the end tanks), 9.25\" high and 3.25\" thick. The inlet and outlet are both 2.50\" in diameter, and the inlet\/outlet necks are in an offset location.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCore Width: 22\" (Overall Width with End Tanks: 30\")\u003c\/li\u003e\n\u003cli\u003eCore Height: 9.25\"\u003c\/li\u003e\n\u003cli\u003eCore Thickness: 3.25\"\u003c\/li\u003e\n\u003cli\u003eInlet Diameter: 2.50\"\u003c\/li\u003e\n\u003cli\u003eOutlet Diameter: 2.50\"\u003c\/li\u003e\n\u003cli\u003eInlet\/Outlet Neck Location: Offset\u003c\/li\u003e\n\u003cli\u003eApprox. HP Rating for this intercooler: 550 HP\u003c\/li\u003e\n\u003cli\u003eBar and Plate Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThis is a universal intercooler for custom intercooler setups. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eVibrant Performance gives a limited warranty against defects in material and workmanship, with the coverage period set by product category. Original proof of purchase is required, labour is not covered, and use on a commercial vehicle voids the warranty. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow big is it?\u003c\/h3\u003e\n\u003cp\u003eThe core is 22\" wide (30\" overall with the end tanks), 9.25\" high and 3.25\" thick.\u003c\/p\u003e\n\u003ch3\u003eHow much power is it rated for?\u003c\/h3\u003e\n\u003cp\u003eThe approximate HP rating for this intercooler is 550 HP.\u003c\/p\u003e\n\u003ch3\u003eWhat size are the inlet and outlet?\u003c\/h3\u003e\n\u003cp\u003eBoth are 2.50\" in diameter, with offset necks.\u003c\/p\u003e\n\u003ch3\u003eWhich cars is it for?\u003c\/h3\u003e\n\u003cp\u003eIt is a universal intercooler, perfectly suited for custom universal intercooler setups on the 1.6T and 2.0T platform.\u003c\/p\u003e","brand":"Vibrant Performance","offers":[{"title":"Default Title","offer_id":40853471232186,"sku":"VIB12810","price":469.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_T8Fh1Ay0GA.png?v=1639382289"},{"product_id":"kia-stinger-gt-3-3tt-performance-main-crank-bearing-set","title":"Kia Stinger GT 3.3TT Performance Main Crank Bearing Set","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger GT 3.3T (3.3TT).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAn ACL Race Series performance main crank bearing set.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_RsR8psM5f2.png?v=1639685161\" alt=\"ACL Race Series Performance Engine Bearings box\" loading=\"lazy\" width=\"493\" height=\"452\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMetallurgical and engineering innovations that provide Race Series bearings with remarkable endurance.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrimetal Formulation\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Strength Steel Backing:\u003c\/strong\u003e Higher tensile strength of steel alloy improves rod bearing strength and retention. Increased crush improves bearing retention from higher radial contact pressures, and also improves heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Eccentricity:\u003c\/strong\u003e Bearing eccentricity is the gradual reduction in wall thickness between the crown and parting line. This enhanced engineering feature allows for compensation for bore distortion and assists in the formation of hydrodynamic oil film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Oil Grooves and Tapered Groove Run–Out:\u003c\/strong\u003e Main bearing grooved uppers with matching groove lowers provide for less interruption to big end oil supply. Tapered groove run–out smooths big end supply cutoff and avoids pressure pulsing and cavitation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge Chamfer. Tight Wall Tolerance. Hardened Steel Backing.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich car does this fit?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the Kia Stinger GT 3.3T (3.3TT).\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order.\u003c\/p\u003e","brand":"ACL Race Series","offers":[{"title":"Default Title","offer_id":40863788892346,"sku":"ACL-4M8599HX-STD","price":215.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_RsR8psM5f2.png?v=1639685161"},{"product_id":"copy-of-kia-stinger-gt-3-3tt-performance-piston-rod-bearing-set","title":"Kia Stinger GT 3.3TT Performance Piston Rod Bearing Set","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger GT 3.3T (3.3TT).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAn ACL Race Series performance piston rod bearing set.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_RsR8psM5f2_0f2c60ac-d14a-4c7b-a650-8c12b9be17e8.png?v=1639685249\" alt=\"ACL Race Series Performance Engine Bearings box\" loading=\"lazy\" width=\"493\" height=\"452\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMetallurgical and engineering innovations that provide Race Series bearings with remarkable endurance.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrimetal Formulation\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Strength Steel Backing:\u003c\/strong\u003e Higher tensile strength of steel alloy improves rod bearing strength and retention. Increased crush improves bearing retention from higher radial contact pressures, and also improves heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Eccentricity:\u003c\/strong\u003e Bearing eccentricity is the gradual reduction in wall thickness between the crown and parting line. This enhanced engineering feature allows for compensation for bore distortion and assists in the formation of hydrodynamic oil film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Oil Grooves and Tapered Groove Run–Out:\u003c\/strong\u003e Main bearing grooved uppers with matching groove lowers provide for less interruption to big end oil supply. Tapered groove run–out smooths big end supply cutoff and avoids pressure pulsing and cavitation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge Chamfer. Tight Wall Tolerance. Hardened Steel Backing.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich car does this fit?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the Kia Stinger GT 3.3T (3.3TT).\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order.\u003c\/p\u003e","brand":"ACL Race Series","offers":[{"title":"Default Title","offer_id":40863792758970,"sku":"6B8598HX","price":149.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_RsR8psM5f2_0f2c60ac-d14a-4c7b-a650-8c12b9be17e8.png?v=1639685249"},{"product_id":"veloster-n-performance-piston-rod-bearing-set","title":"Veloster N Performance Piston Rod Bearing Set","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK NO WAITING - SHIPS WITHIN 48 HOURS!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Veloster N.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAn ACL Race Series performance piston rod bearing set.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_RsR8psM5f2_7cfd6747-52c4-4ae2-8088-bed5e0758405.png?v=1639685946\" alt=\"ACL Race Series Performance Engine Bearings box\" loading=\"lazy\" width=\"493\" height=\"452\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMetallurgical and engineering innovations that provide Race Series bearings with remarkable endurance.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrimetal Formulation\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Strength Steel Backing:\u003c\/strong\u003e Higher tensile strength of steel alloy improves rod bearing strength and retention. Increased crush improves bearing retention from higher radial contact pressures, and also improves heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Eccentricity:\u003c\/strong\u003e Bearing eccentricity is the gradual reduction in wall thickness between the crown and parting line. This enhanced engineering feature allows for compensation for bore distortion and assists in the formation of hydrodynamic oil film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Oil Grooves and Tapered Groove Run–Out:\u003c\/strong\u003e Main bearing grooved uppers with matching groove lowers provide for less interruption to big end oil supply. Tapered groove run–out smooths big end supply cutoff and avoids pressure pulsing and cavitation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge Chamfer. Tight Wall Tolerance. Hardened Steel Backing.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich car does this fit?\u003c\/h3\u003e\n\u003cp\u003eIt is listed for the Veloster N.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes. The listing says it is in stock with no waiting and ships within 48 hours.\u003c\/p\u003e","brand":"ACL Race Series","offers":[{"title":"Default Title","offer_id":40863804063930,"sku":"4B1293HX","price":210.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_RsR8psM5f2_7cfd6747-52c4-4ae2-8088-bed5e0758405.png?v=1639685946"},{"product_id":"3-3tt-hot-pipe-and-cold-pipe-complete-charge-piping","title":"3.3TT Hot pipe and Cold pipe (Complete Charge piping)","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 2018-2021 Kia Stinger with the V6 3.3L (tt) gas engine (3.3TT). aFe now lists this kit for the Kia Stinger 18-23 V6-3.3L (tt).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe aFe BladeRunner hot pipe and cold pipe, complete charge piping for the 3.3TT Kia Stinger. Directly replace your Kia Stinger's restrictive charge pipes with aFe's BladeRunner free-flowing, heat-resistant aluminum pipes. Great for pushing the limits of your Kia Stinger.\u003c\/p\u003e\n\u003cp\u003eIn aFe's words, when it comes to engineering for power, performance, protection and value, aFe POWER is the only choice.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_xP2eD2t5Rn.png?v=1639689983\" alt=\"aFe BladeRunner hot and cold side charge pipes in wrinkle black with silicone couplings and T-bolt clamps, for the Kia Stinger 3.3TT\" loading=\"lazy\" width=\"828\" height=\"723\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eFlow and performance: smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. The charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power.\u003c\/p\u003e\n\u003cp\u003ePremium hardware: the kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. It features a factory style billet aluminum quick-connect adapter with an o-ring to ensure a leak-free fit while maintaining superior strength and durability.\u003c\/p\u003e\n\u003cp\u003eCustom appearance: the pipes are finished in wrinkle black powder coating with a unique laser-etched aFe power logo for a custom look.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHot side outflows the factory charge pipes by up to +38%\u003c\/li\u003e\n\u003cli\u003eCold side outflows the factory charge pipe by up to +12%\u003c\/li\u003e\n\u003cli\u003eTIG-welded 2-1\/2\" to 2-3\/4\" hot side and 3\" cold side aluminum pipes\u003c\/li\u003e\n\u003cli\u003eFactory style quick-connect with an O-ring\u003c\/li\u003e\n\u003cli\u003ePremium stainless-steel spring-loaded T-bolt clamps and 5-ply silicone couplings\u003c\/li\u003e\n\u003cli\u003eBuilt in CNC machined aluminum blow off valve adapter\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT ports provided for connecting sensors or water methanol injection\u003c\/li\u003e\n\u003cli\u003ePowder coated wrinkle black for heat and corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_UrPkI7Dsbu.png?v=1639689985\" alt=\"aFe flow chart for BladeRunner charge pipes: hot side 220 CFM against 160 CFM stock (+38%), cold side 290 CFM against 260 CFM stock (+12%), system flow measured at 7 inch H2O\" loading=\"lazy\" width=\"798\" height=\"600\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe kit directly replaces the Stinger's factory charge pipes, and its factory style billet aluminum quick-connect adapter with an o-ring ensures a leak-free fit. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003eEmissions disclaimer: this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. See also aFe's \u003ca href=\"https:\/\/afepower.com\/prop-65\"\u003eProp 65 Warning\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eaFe Power gives a 2-year warranty on the components of its intercooler and charge pipe kits and 90 days on the finish, to the original purchaser with proof of purchase; parts used on race vehicles are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich Stinger does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe 2018-2021 Kia Stinger with the V6 3.3L (tt) engine. aFe now lists it for the Kia Stinger 18-23 V6-3.3L (tt).\u003c\/p\u003e\n\u003ch3\u003eHow much more does it flow?\u003c\/h3\u003e\n\u003cp\u003eThe hot side outflows the factory charge pipes by up to +38%, and the cold side outflows the factory charge pipe by up to +12%.\u003c\/p\u003e\n\u003ch3\u003eCan I connect sensors or water methanol injection?\u003c\/h3\u003e\n\u003cp\u003eYes. 1\/8\" NPT ports are provided for connecting sensors or water methanol injection.\u003c\/p\u003e\n\u003ch3\u003eDoes it have a blow off valve adapter?\u003c\/h3\u003e\n\u003cp\u003eYes. It has a built in CNC machined aluminum blow off valve adapter.\u003c\/p\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":40863877759162,"sku":"46-20504-B","price":1099.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_xP2eD2t5Rn.png?v=1639689983"},{"product_id":"hyundai-i30n-veloster-n-performance-head-gasket-032","title":"Hyundai I30N \/ Veloster N \/ Elantra N \/ Kona N 3 Layer Performance Head Gasket  .032 (88mm Bore)","description":"\u003cdiv class=\"tab-content page-content\"\u003e\n\u003cdiv class=\"col2-set\"\u003e\n\u003cdiv class=\"col-1\"\u003e\n\u003cdiv class=\"description std\"\u003e\n\u003cp\u003e\u003cstrong\u003eON ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRecommended over 400WHP.\u003c\/p\u003e\n\u003cp class=\"application\"\u003eHEAD GASKET  \u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch1\u003eHEAD GASKETS\u003cspan\u003eMULTI-LAYER PROTECTION\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp class=\"intro\"\u003eOur Multi-Layer Steel gaskets are comprised of multiple embossed layers of both viton coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span18 offset3\"\u003e\u003cimg alt=\"MLS Gaskets\" src=\"https:\/\/www.cometic.com\/files\/materials\/detail\/mls-gaskets.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch2\u003eMLS GASKETS\u003c\/h2\u003e\n\u003cp class=\"intro\"\u003eThe embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCylinder Head Gaskets, Exhaust Gaskets\u003cbr\u003e\u003cbr\u003eThe thickness of the center layer can be changed to change the overall thickness of the gasket.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e.018, .019, .020, .021, .022, .023, .024, .025, .027, .029, .030, .031, .032, .034, .035, .036, .038, .040, .042, .043, .044, .045, .046, .047, .049, .050, .051, .052, .053, .054, .055, .056, .057, .058, .060, .062, .064, .065, .066, .067, .068, .070, .071, .072, .073, .074, .075, .076, .077, .078, .080, .081, .082, .084, .086, .089, .092, .095, .098, .100, .102, .104, .120, .124, .140\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span18 offset3\"\u003e\u003cimg alt=\"MLX Gaskets\" src=\"https:\/\/www.cometic.com\/files\/materials\/detail\/mlx-head-gasket2.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch2\u003eMLX GASKETS\u003c\/h2\u003e\n\u003cp class=\"intro\"\u003eOur MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for fluids against the head and block surface.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCylinder Head Gaskets\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e.028, .030, .032, .036, .040, .041, .042, .043, .044, .048, .050, .051, .052, .053, .054, .055, .056, .058, .060, .061, .062, .064, .065, .066, .067, .068, .071, .072, .073, .077, .079, .080, .081, .089, .142\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch2\u003eHP HEAD GASKET\u003c\/h2\u003e\n\u003cp class=\"intro\"\u003eAn additional HP Shim Layer can be added to provide increased stress around the combustion seal. High-temperature polymer along with embossments provide a micro seal for fluids against the head and block surface.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e.030, .034, .036, .040, .044, .047, .054\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span18 offset3\"\u003e\u003cimg alt=\"Additional Layers\" src=\"https:\/\/www.cometic.com\/files\/materials\/detail\/additional-layers.jpg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch2\u003eADDITIONAL LAYERS\u003c\/h2\u003e\n\u003cp class=\"intro\"\u003eWith any cylinder head gasket design, additional layers can be added to increase active seal height. Clamping force, surface distortion, head lift, and other factors must be taken into consideration when determining the function and design of each layer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-content page-content\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Cometic","offers":[{"title":"Default Title","offer_id":40864665960634,"sku":"C4953-032","price":249.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_TBicczO98q.png?v=1639721333"},{"product_id":"copy-of-hyundai-i30n-veloster-n-4-layer-performance-head-gasket-040","title":"Hyundai I30N \/ Veloster N \/ Elantra N \/ Kona N 4 Layer Performance Head Gasket  .040","description":"\u003cdiv class=\"tab-content page-content\"\u003e\n\u003cdiv class=\"col2-set\"\u003e\n\u003cdiv class=\"col-1\"\u003e\n\u003cdiv class=\"description std\"\u003e\n\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"application\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eHEAD GASKET\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Great for Ultra high WHP applications, the thicker head gasket reduces cylinder compression which allows for more boost. \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch1\u003eHEAD GASKETS\u003cspan\u003eMULTI-LAYER PROTECTION\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp class=\"intro\"\u003eOur Multi-Layer Steel gaskets are comprised of multiple embossed layers of both viton coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span18 offset3\"\u003e\u003cimg src=\"https:\/\/www.cometic.com\/files\/materials\/detail\/mls-gaskets.jpg\" alt=\"MLS Gaskets\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch2\u003eMLS GASKETS\u003c\/h2\u003e\n\u003cp class=\"intro\"\u003eThe embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCylinder Head Gaskets, Exhaust Gaskets\u003cbr\u003e\u003cbr\u003eThe thickness of the center layer can be changed to change the overall thickness of the gasket.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e.018, .019, .020, .021, .022, .023, .024, .025, .027, .029, .030, .031, .032, .034, .035, .036, .038, .040, .042, .043, .044, .045, .046, .047, .049, .050, .051, .052, .053, .054, .055, .056, .057, .058, .060, .062, .064, .065, .066, .067, .068, .070, .071, .072, .073, .074, .075, .076, .077, .078, .080, .081, .082, .084, .086, .089, .092, .095, .098, .100, .102, .104, .120, .124, .140\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span18 offset3\"\u003e\u003cimg src=\"https:\/\/www.cometic.com\/files\/materials\/detail\/mlx-head-gasket2.jpg\" alt=\"MLX Gaskets\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch2\u003eMLX GASKETS\u003c\/h2\u003e\n\u003cp class=\"intro\"\u003eOur MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for fluids against the head and block surface.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCylinder Head Gaskets\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e.028, .030, .032, .036, .040, .041, .042, .043, .044, .048, .050, .051, .052, .053, .054, .055, .056, .058, .060, .061, .062, .064, .065, .066, .067, .068, .071, .072, .073, .077, .079, .080, .081, .089, .142\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch2\u003eHP HEAD GASKET\u003c\/h2\u003e\n\u003cp class=\"intro\"\u003eAn additional HP Shim Layer can be added to provide increased stress around the combustion seal. High-temperature polymer along with embossments provide a micro seal for fluids against the head and block surface.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e.030, .034, .036, .040, .044, .047, .054\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"span18 offset3\"\u003e\u003cimg src=\"https:\/\/www.cometic.com\/files\/materials\/detail\/additional-layers.jpg\" alt=\"Additional Layers\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"span16 offset4\"\u003e\n\u003ch2\u003eADDITIONAL LAYERS\u003c\/h2\u003e\n\u003cp class=\"intro\"\u003eWith any cylinder head gasket design, additional layers can be added to increase active seal height. Clamping force, surface distortion, head lift, and other factors must be taken into consideration when determining the function and design of each layer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-content page-content\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Cometic","offers":[{"title":"Default Title","offer_id":40864681001146,"sku":"C4953-040","price":289.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_TBicczO98q_54502c15-86c3-4ecd-8bdb-4ab0ab2a01b3.png?v=1639721624"},{"product_id":"1-6t-ferrera-dual-valve-springs","title":"1.6T Ferrera Dual Valve Springs G4FJ","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSET OF 16. Made to rev safely to 10,000RPM.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.6T G4FJ engine, as named in the listing title. Set of 16.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eDual valve springs for the 1.6T G4FJ, sold as a set of 16 and made in the USA. Ferrea double valve springs are the highest quality available, needed for 7,000RPM or up to 10,000RPM.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_wIoY5YMFFN.png?v=1639725877\" alt=\"Ferrea dual valve springs for the 1.6T G4FJ engine\" loading=\"lazy\" width=\"259\" height=\"175\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eHarmonics or high frequency fatigue is present in all racing engines and will usually destroy the valvetrain if not controlled. Properly designed valve springs will control the dominant harmonics, provide the needed stability, and reduce valvetrain component wear.\u003c\/p\u003e\n\u003cp\u003eFerrea valve springs are developed from high strength alloys, including premium grade chrome silicon steel. The springs are heat-treated and stress relieved, which dramatically increases the spring's life. They provide the stability needed for high lift, high rpm racing engines, while minimizing the load loss for today's aggressive valvetrain combinations.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 16 double (dual) valve springs\u003c\/li\u003e\n\u003cli\u003eMade to rev safely to 10,000RPM; needed for 7,000RPM or up to 10,000RPM\u003c\/li\u003e\n\u003cli\u003eHigh strength alloys, including premium grade chrome silicon steel\u003c\/li\u003e\n\u003cli\u003eHeat-treated and stress relieved, which dramatically increases spring life\u003c\/li\u003e\n\u003cli\u003eControls the dominant harmonics and reduces valvetrain component wear\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow many springs are in the set?\u003c\/h3\u003e\n\u003cp\u003e16.\u003c\/p\u003e\n\u003ch3\u003eHow high can the engine rev with them?\u003c\/h3\u003e\n\u003cp\u003eThey are made to rev safely to 10,000RPM. Ferrea double valve springs are needed for 7,000RPM or up to 10,000RPM.\u003c\/p\u003e\n\u003ch3\u003eWhere are they made?\u003c\/h3\u003e\n\u003cp\u003eIn the USA.\u003c\/p\u003e","brand":"Ferrera Racing Components","offers":[{"title":"Default Title","offer_id":40864775569594,"sku":"S10111","price":1099.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_wIoY5YMFFN.png?v=1639725877"},{"product_id":"340-lph-e85-in-tank-electric-fuel-pump","title":"340 LPH E85 IN-TANK ELECTRIC FUEL PUMP","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmall modifications to the sending unit are needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal (Holley lists it as a universal fit). An in-tank electric fuel pump for carbureted or EFI applications, designed for in-tank use only.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eHolley's Sniper EFI E85 in-tank electric fuel pump, 340 LPH: a high output pump that is compatible with gasoline or E85. It supports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts \/ 16.9 AMP Draw). Of course there are many variables, and the estimates are based on gasoline; individual systems will vary based on fuel system design, regulator type, fuel cell location, etc.\u003c\/p\u003e\n\u003cp\u003eHolley designed it for applications that need more fuel flow while using the factory O.E. lines and mounting brackets, and as a universal replacement or upgrade for aftermarket applications that need more fuel to support power adders such as nitrous, turbos and superchargers. Holley calls it a perfect upgrade for aftermarket pumps like its Retrofit EFI Modules when more fuel is needed with turbos or nitrous. Made in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_WjN6gM0gIM.png?v=1639727293\" alt=\"Holley Sniper EFI 340 LPH E85 in-tank fuel pump with its installation kit: wiring pigtail, inlet strainer, rubber hose and two hose clamps\" loading=\"lazy\" width=\"659\" height=\"448\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eA compact in-tank pump, designed for in-tank use only and small enough to fit in existing hanger assemblies without modification. Its inlet filter meets or exceeds original equipment specifications and provides improved filtration\/durability. The pump can be used with carbureted or EFI applications; it can be regulated to support carbureted systems as well. Holley lists the pump at 1.535\" in diameter and 5.180\" long including the outlet barb, with an 8 mm inlet and a 9 mm barb outlet.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e340 LPH E85 Compatible; also runs on gasoline\u003c\/li\u003e\n\u003cli\u003eSupports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts \/ 16.9 AMP Draw); estimates are based on gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for in-tank use only\u003c\/li\u003e\n\u003cli\u003eCompact enough to fit in existing hanger assemblies without modification\u003c\/li\u003e\n\u003cli\u003eComplete kit with all drop parts, accessories and installation instructions\u003c\/li\u003e\n\u003cli\u003eInlet filter meets or exceeds original equipment specifications and provides improved filtration\/durability\u003c\/li\u003e\n\u003cli\u003eCan be used with carbureted or EFI applications\u003c\/li\u003e\n\u003cli\u003ePerfect upgrade for aftermarket pumps like Holley's Retrofit EFI Modules when more fuel is needed with turbos or nitrous\u003c\/li\u003e\n\u003cli\u003eInstallation hardware kit: filter, wiring pigtail, rubber hose, (2) clamps, rubber grommet (Holley)\u003c\/li\u003e\n\u003cli\u003eNot included: fuel sending unit, mounting bracket, seal and lock ring, fuel pressure regulator (Holley)\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_GvZvemTAQc.png?v=1639727295\" alt=\"Close-up of the red end cap and wiring connector on the Holley Sniper EFI fuel pump\" loading=\"lazy\" width=\"952\" height=\"809\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eSmall modifications to the sending unit are needed. The pump is designed for in-tank use only and comes as a complete kit with the drop parts, accessories and installation instructions; the sending unit and mounting bracket are not included. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eHolley gives this pump its Manufacturer's Limited 90 Day Warranty against defects in material and workmanship, from the date of purchase, for the original purchaser only. Racing use and modified or misused parts are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes it work with E85?\u003c\/h3\u003e\n\u003cp\u003eYes. It is 340 LPH E85 compatible, and Holley says it works with gasoline or E85.\u003c\/p\u003e\n\u003ch3\u003eHow much power will it support?\u003c\/h3\u003e\n\u003cp\u003eUp to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts \/ 16.9 AMP Draw). The estimates are based on gasoline, and individual systems will vary.\u003c\/p\u003e\n\u003ch3\u003eDoes it drop straight in?\u003c\/h3\u003e\n\u003cp\u003eSmall modifications to the sending unit are needed. The kit includes the drop parts, accessories and installation instructions.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order.\u003c\/p\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":40864805617850,"sku":"HOL19-342","price":289.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_WjN6gM0gIM.png?v=1639727293"},{"product_id":"1-6t-supertech-valve-springs-g4fj","title":"1.6T Supertech Valve Springs G4FJ","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSET OF 16. A must for revving over 7K.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Valve Springs are known to be safe to 7,000RPM, with a stuffed turbo more is needed, these will allow 8,000RPM safely without the risk of valve float.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.6T G4FJ engine. Supertech's own catalogue lists this spring for the Mini R56 N14 and N18 engines, and its G4FJ valve spring kits for the Hyundai Veloster 1.6L use the same spring.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA set of 16 Supertech valve springs for the 1.6T G4FJ, and a must for revving over 7K. OEM valve springs are known to be safe to 7,000RPM, but with a stuffed turbo more is needed: these will allow 8,000RPM safely without the risk of valve float.\u003c\/p\u003e\n\u003cp\u003eSupertech is located in San Jose, California, in the heart of Silicon Valley, and was born from the same fertile ground as many other companies in this area utilizing cutting edge technology to fuel growth. Supertech fuses this technology with passionate people and over 30 years of experience in creating the highest performance valves and valve train components available. It provides the racing market with superior valves and valve train components for virtually every type of racing: whether it's Drag Racing, Rally, Road Racing or any other type of motorsport, Supertech is sure to have the perfect performance solution for your application. If not, Supertech is always willing to work with you to custom manufacture the solution that is just right for you.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_aFeqP6nDkM.png?v=1639883966\" alt=\"Two Supertech valve springs for the 1.6T G4FJ engine, one standing and one lying on its side\" loading=\"lazy\" width=\"407\" height=\"323\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eSupertech catalogues this spring as a beehive valve spring with a rate of 9.70lbs\/mm. Its beehive springs have a tapered body that reduces mass at the top of the spring and allows a smaller, lighter retainer, and variable coil spacing that helps suppress harmonic resonance at high RPM. The springs are made from Superclean Chrome Silicon Vanadium steel alloy. Made in the USA.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSET OF 16\u003c\/li\u003e\n\u003cli\u003eAllows 8,000RPM safely without the risk of valve float; OEM valve springs are known to be safe to 7,000RPM\u003c\/li\u003e\n\u003cli\u003eA must for revving over 7K\u003c\/li\u003e\n\u003cli\u003eBeehive valve spring, rate 9.70lbs\/mm (Supertech)\u003c\/li\u003e\n\u003cli\u003eSuperclean Chrome Silicon Vanadium steel alloy (Supertech)\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhy upgrade the valve springs?\u003c\/h3\u003e\n\u003cp\u003eOEM valve springs are known to be safe to 7,000RPM; with a stuffed turbo more is needed. These will allow 8,000RPM safely without the risk of valve float.\u003c\/p\u003e\n\u003ch3\u003eHow many springs do I get?\u003c\/h3\u003e\n\u003cp\u003eA set of 16.\u003c\/p\u003e\n\u003ch3\u003eWhere are they made?\u003c\/h3\u003e\n\u003cp\u003eIn the USA. Supertech is located in San Jose, California.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order. Contact us for current lead time.\u003c\/p\u003e","brand":"Supertech","offers":[{"title":"Default Title","offer_id":40869403721914,"sku":"SPR-MC56BE","price":519.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_aFeqP6nDkM.png?v=1639883966"},{"product_id":"1-6t-je-pistons-g4fj","title":"1.6T JE Pistons G4FJ - 77.00mm Standard Bore","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai 1.6T G4FJ engine (cylinder head: GAMMA GDI 1.6T) at the 77.00 mm standard bore. JE lists it for the Hyundai 1.6L Gamma Turbo GDI.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA JE Pistons forged piston kit for the 1.6T G4FJ at the standard 77.00 mm bore. JE lists it as a set of 4 dish pistons, supplied with wrist pins, locks and JE Pro Seal piston rings.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_znCjX9YdBC.png?v=1639884529\" alt=\"JE Pistons forged piston for the Hyundai 1.6T G4FJ, three-quarter view of the dished crown, ring grooves and coated skirt\" loading=\"lazy\" width=\"1006\" height=\"857\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe pistons are made from 2618 piston material with a round forging type and a dish crown (piston volume -8.2 cc). Compression height is 1.099 in. Each piston runs a 0.787 in pin, 2.250 in long, with a 0.180 in pin wall, in 5115 pin material, and the average piston weight is 249 g. JE lists a skirt coat among the piston's features.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eBore diameter: 77.00 mm (standard bore)\u003c\/li\u003e\n\u003cli\u003eCompression height: 1.099 in\u003c\/li\u003e\n\u003cli\u003ePiston volume: -8.2 cc\u003c\/li\u003e\n\u003cli\u003ePiston type: Dish\u003c\/li\u003e\n\u003cli\u003eCylinder head: GAMMA GDI 1.6T\u003c\/li\u003e\n\u003cli\u003ePiston pin outside diameter: 0.787 in\u003c\/li\u003e\n\u003cli\u003ePiston pin length: 2.250 in\u003c\/li\u003e\n\u003cli\u003ePin wall thickness: 0.180 in\u003c\/li\u003e\n\u003cli\u003ePiston pin material: 5115\u003c\/li\u003e\n\u003cli\u003eRingset included: Yes\u003c\/li\u003e\n\u003cli\u003eTop compression ring thickness: 0.04 in\u003c\/li\u003e\n\u003cli\u003eSecond compression ring thickness: 0.048 in\u003c\/li\u003e\n\u003cli\u003eOil ring thickness: 0.111 in\u003c\/li\u003e\n\u003cli\u003ePiston material: 2618\u003c\/li\u003e\n\u003cli\u003eForging type: Round\u003c\/li\u003e\n\u003cli\u003ePiston average weight: 249 g\u003c\/li\u003e\n\u003cli\u003ePistons in the kit: 4\u003c\/li\u003e\n\u003cli\u003eProduct market: Sport Compact\u003c\/li\u003e\n\u003cli\u003eProp 65: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_hgIZmoDdcx.png?v=1639884529\" alt=\"Top view of the JE Pistons crown showing the dish and valve reliefs\" loading=\"lazy\" width=\"1144\" height=\"802\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 77mm, for the 77.00 mm standard bore.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThese pistons suit the 77.00 mm standard bore of the 1.6T G4FJ. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_PI9C2GdbMi.png?v=1639884526\" alt=\"Underside of a JE Pistons piston showing the pin bosses\" loading=\"lazy\" width=\"1072\" height=\"874\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this a full set?\u003c\/h3\u003e\n\u003cp\u003eYes. JE lists it as a set of 4 pistons, supplied with wrist pins, locks and JE Pro Seal piston rings.\u003c\/p\u003e\n\u003ch3\u003eWhich engine is it for?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai 1.6T G4FJ (cylinder head GAMMA GDI 1.6T) at the 77.00 mm standard bore. JE lists it for the Hyundai 1.6L Gamma Turbo GDI.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"77mm","offer_id":40869415387322,"sku":"JE361285","price":1253.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_znCjX9YdBC.png?v=1639884529"},{"product_id":"2-0t-hyundai-kia-cam-follower-bolt-kit-veloster-n","title":"2.0T Hyundai \/ Kia Cam Follower Bolt Kit (Veloster N)","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 2.0T Hyundai \/ Kia, Veloster N. ARP's own catalogue lists it as its Hyundai 2.0L (G4KF) turbo cam tower stud kit.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eARP's cam tower fastener kit for the 2.0T Hyundai \/ Kia engine in the Veloster N. It is sold as a kit, with washers included and no nuts.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_14bfmzt7I1.png?v=1639888137\" alt=\"ARP cam tower kit for the Hyundai 2.0T: twenty black 12-point fasteners in ARP packaging\" loading=\"lazy\" width=\"604\" height=\"883\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eBlack 12-point fasteners, as shown in ARP's pack, with a fastener tensile strength of 180,000 psi. Washers are included; nuts are not.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ARP\u003c\/li\u003e\n\u003cli\u003eFastener Tensile Strength (psi): 180,000 psi\u003c\/li\u003e\n\u003cli\u003eWashers Included: Yes\u003c\/li\u003e\n\u003cli\u003eNuts Included: No\u003c\/li\u003e\n\u003cli\u003eQuantity: Sold as a kit\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order.\u003c\/p\u003e\n\u003ch3\u003eAre nuts and washers included?\u003c\/h3\u003e\n\u003cp\u003eWashers are included. Nuts are not.\u003c\/p\u003e\n\u003ch3\u003eWhich ARP kit is this?\u003c\/h3\u003e\n\u003cp\u003eARP's own catalogue lists it as its Hyundai 2.0L (G4KF) turbo cam tower stud kit.\u003c\/p\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":40869458149562,"sku":"128-1001","price":319.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_14bfmzt7I1.png?v=1639888137"},{"product_id":"performance-spark-plugs-set-of-4-hks-m45xl-replacement-ilkr9q7g-heat-range-9","title":"Colder Spark Plugs 1.6T\/2.0T Heat Range 9 (Set of 4)","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK ALWAYS!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe hold a minimum of 100 sets: our inventory management system is set to reorder at 100 sets, ensuring we always have these in stock to ship same or next day.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet of 4 plugs. PRICE IS FOR SET OF 4.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.6T and 2.0T engines, as a colder heat range 9 plug and an HKS replacement. Not suggested for SmartStream engines. NGK Laser Iridium, set of 4.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eNGK Laser Iridium spark plugs in heat range 9, sold as a set of 4. These are a replacement for HKS for N75 Motorsports ECU Tuning, and our go to plug for our tunes: a great set of plugs for our tune or piggyback. This plug is the exact same as HKS without the brand name (HKS are made by NGK anyway). As good as HKS Spark Plugs if not better at half the price (HKS Replacement). If you want a premium spark plug, look for NGK Racing Series Plugs.\u003c\/p\u003e\n\u003cp\u003eCompatible with any N75 Motorsports ECU Calibration: Project N2.2 (our Veloster N development car) runs these plugs on 100% M1 meth at 25PSI and 28 degree timing peak during WOT, on a flame tune. N75 Motorsports approved for use with any N75 Motorsports Performance ECU Calibration, including flame tuning.\u003c\/p\u003e\n\u003cp\u003eN75 Motorsports will NOT sell HKS plugs, because this product is as good for half the cost. We do not feel it is fair for the customer to be \"fooled\" by brand names. We used to sell HKS plugs as they are the cheapest available 9 heat range plug; however, we have now tested these plugs and they are the same as HKS plugs, and we have removed them from our website as we see it as a rip off to the customer. We do not believe it is fair for a customer to spend over double for basically the exact same plug, if not a worse one. Why didn't we sell these from the beginning? They were unknown to us at the time; now these plugs have been used by many customers tuned by other tuners without issue, let alone our tune and development cars.\u003c\/p\u003e\n\u003cp\u003eWe consider these plugs a cheaper alternative or a value option, yet in reality NGK considers this a premium spark plug: their top of the line, before their Racing Series. Used in all types of motorsports, from weekend racers to full drag cars, NGK is the go-to. NGK plugs have been the standard in the automotive industry for the last 25 years+: from ultra high performance exotic cars, to daily drivers, to fleet vehicles, you will find NGK from factory in nearly all vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk_62c468cd-0160-46c6-9c36-d75bb9ce27de.jpg?v=1654286368\" alt=\"NGK Laser Iridium spark plug, white insulator marked NGK IR with a plated steel shell\" loading=\"lazy\" width=\"400\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eNGK Laser Iridium spark plugs provide superior ignitability and long service life. The fine wire iridium tipped center electrode and fine wire platinum tipped ground electrode ensure a slow wear rate, providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. This is the colder heat range 9 version, with a 12 mm thread, a 26.5 mm reach, a 5\/8 in. hex and a gasket seat.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNGK Laser Iridium, heat range 9\u003c\/li\u003e\n\u003cli\u003eFine wire iridium tipped center electrode and fine wire platinum tipped ground electrode\u003c\/li\u003e\n\u003cli\u003eTrivalent metal plating provides superior anti-corrosion and anti-seizing properties\u003c\/li\u003e\n\u003cli\u003eCorrugated ribs prevent flashover\u003c\/li\u003e\n\u003cli\u003ePure alumina silicate ceramic insulator, provides superior strength and better heat transfer\u003c\/li\u003e\n\u003cli\u003eCopper core aids in heat removal\u003c\/li\u003e\n\u003cli\u003eTriple seals prevent leakage\u003c\/li\u003e\n\u003cli\u003eSpark Plug Hex Size: 5\/8 in.\u003c\/li\u003e\n\u003cli\u003eSpark Plug Reach: 26.5 mm\u003c\/li\u003e\n\u003cli\u003eSpark Plug Seat Type: Gasket\u003c\/li\u003e\n\u003cli\u003eSpark Plug Thread Size: 12 mm\u003c\/li\u003e\n\u003cli\u003eUNSPSC: 26101732\u003c\/li\u003e\n\u003cli\u003ePre-gapped by us to (our suggestion) .025\u003c\/li\u003e\n\u003cli\u003eSet of 4 plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk1_52f69057-f7e3-4d01-ad62-030d595d03f1.jpg?v=1654286368\" alt=\"Close-up of the NGK Laser Iridium firing end: fine-wire center electrode, ground electrode and threads\" loading=\"lazy\" width=\"400\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003ePre-gapped by us to .025, our suggestion. NOTE: Not suggested for SmartStream Engines. N75 Motorsports approved for use with any N75 Motorsports Performance ECU Calibration, including flame tuning. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eNGK warrants its spark plugs against defects in workmanship or materials for 60 days from the date of purchase, for the original purchaser; racing use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I run these with an N75 tune?\u003c\/h3\u003e\n\u003cp\u003eYes. They are N75 Motorsports approved for use with any N75 Motorsports Performance ECU Calibration, including flame tuning, and they are our go to plug for our tunes.\u003c\/p\u003e\n\u003ch3\u003eDo they suit SmartStream engines?\u003c\/h3\u003e\n\u003cp\u003eThey are not suggested for SmartStream engines.\u003c\/p\u003e\n\u003ch3\u003eAre they gapped?\u003c\/h3\u003e\n\u003cp\u003eYes. We pre-gap them to .025, our suggestion.\u003c\/p\u003e\n\u003ch3\u003eHow fast do they ship?\u003c\/h3\u003e\n\u003cp\u003eWe hold a minimum of 100 sets and reorder at 100 sets, so we always have these in stock to ship same or next day.\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":41491106562234,"sku":"97312","price":159.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk_62c468cd-0160-46c6-9c36-d75bb9ce27de.jpg?v=1654286368"},{"product_id":"veloster-n-hot-pipe-upgrade","title":"Upsized Veloster N\/I30N\/Kona N Turbo Discharge Pipe (Hot Pipe Upgrade)","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Veloster N, i30 N and Kona N (2.0T). Fits both 6-speed and DCT models. This pipe is not listed for the Elantra N.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe N75 Motorsports hot pipe is an upsized 2.5-inch turbo discharge pipe, made and designed in Canada. It replaces the factory pipe that carries compressed, hot air from the turbocharger outlet to the front-mount intercooler (FMIC).\u003c\/p\u003e\n\u003cp\u003eIt is an OEM replacement that bolts into the factory location and comes with T-bolt clamps and reinforced silicone couplers. The 2.5-inch pipe works with the factory setup and is also suited to upgraded and hybrid turbos fitted to these cars.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/hotpipe.jpg?v=1657244393\" alt=\"N75 Motorsports polished 2.5 inch hot pipe installed on a 2.0T Hyundai N, seen from below, with black silicone couplers and T-bolt clamps running toward the intercooler\" loading=\"lazy\" width=\"1536\" height=\"2048\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eIncreasing the diameter of the hot pipe increases flow and gives a reduction in intake air temperature that is slight but present in our logging. Smoother airflow through the pipe also reduces turbulence, which increases flow from the turbo to the intercooler.\u003c\/p\u003e\n\u003cp\u003eThe pipe has no unnecessary kink. A coupler is shaped to make the bend needed to reach the intercooler, so the charge air does not take an extra direction change and the flow path stays smoother.\u003c\/p\u003e\n\u003cp\u003eThe solid pipe and reinforced silicone couplers do not flex or stretch under boost the way the OEM pipe can, which helps throttle response and helps keep the charge path sealed. The pipe is port-matched to a 2.5-inch aftermarket FMIC inlet, which improves flow.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUpsized 2.5-inch turbo discharge pipe\u003c\/li\u003e\n\u003cli\u003eMade and designed in Canada by N75 Motorsports\u003c\/li\u003e\n\u003cli\u003eOEM replacement that bolts into the factory location\u003c\/li\u003e\n\u003cli\u003eReinforced silicone couplers and solid piping that do not stretch under boost\u003c\/li\u003e\n\u003cli\u003eT-bolt clamps included\u003c\/li\u003e\n\u003cli\u003eCoupler-made bend into the intercooler, with no extra kink\u003c\/li\u003e\n\u003cli\u003ePort-matched to a 2.5-inch aftermarket FMIC inlet\u003c\/li\u003e\n\u003cli\u003eSlight reduction in intake air temperature\u003c\/li\u003e\n\u003cli\u003eWorks with the factory setup and suits upgraded and hybrid turbos\u003c\/li\u003e\n\u003cli\u003eFits both 6-speed and DCT models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/290468274_3135680126695292_8858953750996040945_n.jpg?v=1657244393\" alt=\"Black silicone elbow coupler on the N75 hot pipe making the bend up to the intercooler, held by a T-bolt clamp\" loading=\"lazy\" width=\"1536\" height=\"2048\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntercooler:\u003c\/strong\u003e OEM or Aftermarket. Choose OEM for the factory intercooler or an aftermarket intercooler that keeps the OEM inlet size; choose Aftermarket for an intercooler with a 2.5-inch inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDEI Wrap:\u003c\/strong\u003e No or Yes. Yes adds DEI Reflect-A-Gold heat-reflective wrap to the pipe to help maintain performance on track; No leaves the pipe unwrapped.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe hot pipe installs in place of the OEM pipe and bolts into the factory location using the supplied T-bolt clamps and silicone couplers. It fits both 6-speed and DCT models. Check fitment with us before ordering one for an Elantra N.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/290594281_733969064545642_5088549722146137310_n.jpg?v=1657244393\" alt=\"Under-car view of the installed N75 hot pipe routing past the oil filter, with reinforced silicone couplers and T-bolt clamps at each joint\" loading=\"lazy\" width=\"2048\" height=\"1536\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes it fit the 6-speed and the DCT?\u003c\/h3\u003e\n\u003cp\u003eYes, it fits both the 6-speed and the DCT.\u003c\/p\u003e\n\u003ch3\u003eWhich Intercooler option do I choose?\u003c\/h3\u003e\n\u003cp\u003eChoose OEM for the factory intercooler or an aftermarket intercooler that keeps the OEM inlet size. Choose Aftermarket for an intercooler with a 2.5-inch inlet.\u003c\/p\u003e\n\u003ch3\u003eWhat does the DEI Wrap option add?\u003c\/h3\u003e\n\u003cp\u003eIt adds DEI Reflect-A-Gold heat-reflective wrap on the pipe to help maintain performance on track.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Elantra N?\u003c\/h3\u003e\n\u003cp\u003eThis pipe is listed for the Veloster N, i30 N and Kona N (2.0T), which does not include the Elantra N. Check fitment with us before ordering one for an Elantra N.\u003c\/p\u003e","brand":"N75 Motorsports","offers":[{"title":"OEM \/ No","offer_id":41593745080506,"sku":"OEM1001","price":399.99,"currency_code":"CAD","in_stock":true},{"title":"OEM \/ Yes","offer_id":41593751503034,"sku":"OEM7901","price":459.99,"currency_code":"CAD","in_stock":true},{"title":"Aftermarket \/ No","offer_id":41593745113274,"sku":"AF12-100","price":399.99,"currency_code":"CAD","in_stock":true},{"title":"Aftermarket \/ Yes","offer_id":41593751535802,"sku":"TDC246-34","price":459.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/hotpipe.jpg?v=1657244393"},{"product_id":"powerflex-upper-motor-mount-bushing-insert","title":"Powerflex Upper Motor Mount Bushing Insert","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN Day Sale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.6T\/2.0T. Elantra N \/ Kona N \/ Veloster N, and 1.6T variants which use the same mount: we have now confirmed fitment on ALL 1.6T variants. Powerflex lists it for \u003ca href=\"https:\/\/www.powerflexusa.com\/shop\/category\/hyundai-2352\"\u003eHyundai\u003c\/a\u003e: \u003ca href=\"https:\/\/www.powerflexusa.com\/shop\/category\/hyundai-veloster-2459\"\u003eVeloster\u003c\/a\u003e (\u003ca href=\"https:\/\/www.powerflexusa.com\/shop\/category\/hyundai-veloster-veloster-js-including-n-2018-1945\"\u003eVeloster JS (including N) 2018+\u003c\/a\u003e) and \u003ca href=\"https:\/\/www.powerflexusa.com\/shop\/category\/hyundai-elantra-2462\"\u003eElantra\u003c\/a\u003e (\u003ca href=\"https:\/\/www.powerflexusa.com\/shop\/category\/hyundai-elantra-elantra-ae-cn7-including-n-2021-2463\"\u003eElantra AE \/ CN7 (including N) 2021+\u003c\/a\u003e), and notes it is not suitable for 1.0l T-GDI engine variants.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAn easy-to-fit upgrade to limit movement within the upper engine mount. The insert simply fits into the voiding on the top of the mount and is secured in place with the original bolt. Reduced powertrain movement will result in sharper throttle response and reduced wheel-hop, making for an even more engaging and sporty driving experience.\u003c\/p\u003e\n\u003cp\u003eIn our testing we found this insert performs as good as the TTR Solid upper mount. While this is no replacement for a solid mount, in terms of performance? It is nearly the same.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/PFF26-125_HyundaiVelosterUpperEngineMountInsert_Street.jpg?v=1657745146\" alt=\"Powerflex upper engine mount insert in yellow polyurethane with a black sleeve, in front of Powerflex packaging\" loading=\"lazy\" width=\"600\" height=\"600\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eA polyurethane insert that fills the void on the top of the factory upper engine mount and is held by the original bolt, so the factory mount stays in the car. Filling that void limits movement within the mount. Powerflex makes it in two compounds: a Purple 80A Durometer insert and a Black 95A Durometer insert.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits into the voiding on the top of the upper engine mount\u003c\/li\u003e\n\u003cli\u003eSecured in place with the original bolt\u003c\/li\u003e\n\u003cli\u003eLimits movement within the upper engine mount: sharper throttle response and reduced wheel-hop\u003c\/li\u003e\n\u003cli\u003eIn our testing, nearly the same performance as the TTR Solid upper mount\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/download_1.jpg?v=1657745146\" alt=\"Hyundai upper engine mount with a yellow Powerflex insert fitted in the void on top\" loading=\"lazy\" width=\"900\" height=\"600\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Race (Black) or Performance (Purple). Race (Black) is the Black 95A Durometer insert. Performance (Purple) is the Purple 80A Durometer insert.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe insert fits into the voiding on the top of the upper engine mount and is secured in place with the original bolt. Powerflex notes it is not suitable for 1.0l T-GDI engine variants. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/download_2.jpg?v=1657745154\" alt=\"Yellow Powerflex insert installed in the top of the upper engine mount, beside the coolant reservoir\" loading=\"lazy\" width=\"800\" height=\"600\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003ePowerflex gives a lifetime warranty on its products to the original purchaser buying through an authorised distributor, limited to replacement of the supplied parts. Black Series parts (part numbers ending BLK, such as the Race (Black) insert) and parts used for track or competition are excluded from the lifetime warranty. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs it as good as a solid mount?\u003c\/h3\u003e\n\u003cp\u003eIn our testing this insert performs as good as the TTR Solid upper mount. It is no replacement for a solid mount, but in terms of performance it is nearly the same.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the 1.6T cars?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits 1.6T variants which use the same mount, and we have confirmed fitment on all 1.6T variants. Powerflex notes it is not suitable for 1.0l T-GDI engine variants.\u003c\/p\u003e\n\u003ch3\u003eRace (Black) or Performance (Purple)?\u003c\/h3\u003e\n\u003cp\u003eRace (Black) is the Black 95A Durometer insert. Performance (Purple) is the Purple 80A Durometer insert.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Race (Black)","offer_id":41610069115066,"sku":"PFF26-125","price":85.0,"currency_code":"CAD","in_stock":true},{"title":"Performance (Purple)","offer_id":44107282088122,"sku":"PFF26-125P (NOT BLK)","price":80.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/PFF26-125_HyundaiVelosterUpperEngineMountInsert_Street.jpg?v=1657745146"},{"product_id":"ultra-high-flow-hpfp-high-pressure-fuel-pump-veloster-n-i30n-kona-n-elantra-n","title":"Ultra High Flow HPFP (High Pressure Fuel Pump) Veloster N \/ I30N \/ Kona N \/ Elantra N","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Veloster N, i30 N, Kona N and Elantra N (the N cars).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAn upgraded, ultra-high-flow high-pressure fuel pump (HPFP) for the Hyundai N engine. It takes the place of the factory high-pressure fuel pump and delivers more fuel flow for higher-horsepower builds. Flow is rated to support up to 500 whp, depending on fuel and octane.\u003c\/p\u003e\n\u003cp\u003eIt also suits cars running an N75 Motorsports ECU calibration such as our \u003ca href=\"https:\/\/n75motorsports.ca\/products\/hyundai-elantra-n-ecu-calibration-on-spare-ecu\"\u003eElantra N calibration on a spare ECU\u003c\/a\u003e, the \u003ca href=\"https:\/\/n75motorsports.ca\/products\/hyundai-elantra-n-ecu-calibration-spare-ecu-2024-2026\"\u003e2024-2026 Elantra N calibration\u003c\/a\u003e and the \u003ca href=\"https:\/\/n75motorsports.ca\/products\/hyundai-kona-n-ecu-calibration-on-spare-ecu\"\u003eKona N calibration on a spare ECU\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/Screenshot-20240416_010435_Facebook_de840e75-b921-4d0d-93a4-5de0deb9edb3.jpg?v=1713244476\" alt=\"Ultra high flow high-pressure fuel pump for the Hyundai N engine: silver pump body with black electrical connector, fuel inlet fitting, threaded high-pressure outlet, two-bolt mounting flange and follower spring\" loading=\"lazy\" width=\"1080\" height=\"1076\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eDevelopment started from the 2GTA0 pump, an off-the-shelf fuel-pump upgrade for N car owners with a piston nearly 9% larger than the original equipment (OE). This Ultra Flow pump goes further: it uses a bespoke piston 15% larger than the 2GTA0, which is itself larger than the OE pump.\u003c\/p\u003e\n\u003cp\u003eThe result is about 40% more flow and about a 40% larger pumping chamber than the upgraded Hyundai (Sonata) pump, so there is more fuel available and more performance potential for your build.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBespoke piston 15% larger than the 2GTA0 upgrade pump\u003c\/li\u003e\n\u003cli\u003eAbout 40% more flow and about a 40% larger pumping chamber than the upgraded Hyundai (Sonata) pump\u003c\/li\u003e\n\u003cli\u003eFlow rated to support up to 500 whp, depending on fuel and octane\u003c\/li\u003e\n\u003cli\u003eTakes the place of the factory high-pressure fuel pump\u003c\/li\u003e\n\u003cli\u003eFits the N cars: Veloster N, i30 N, Kona N and Elantra N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe pump takes the place of the factory high-pressure fuel pump on the N cars. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e3 months for all buyers, and 6 months for N75 Motorsports ECU-tuned customers.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much power will it support?\u003c\/h3\u003e\n\u003cp\u003eFlow is rated to support up to 500 whp, depending on your fuel and octane.\u003c\/p\u003e\n\u003ch3\u003eHow is it different from the off-the-shelf 2GTA0 upgrade pump?\u003c\/h3\u003e\n\u003cp\u003eIt uses a bespoke piston 15% larger than the 2GTA0, with a larger pumping chamber and more flow. Development started from the 2GTA0, which already runs a piston nearly 9% larger than the OE pump.\u003c\/p\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eVeloster N, i30 N, Kona N and Elantra N (the N cars).\u003c\/p\u003e\n\u003ch3\u003eWho do I contact with questions?\u003c\/h3\u003e\n\u003cp\u003eProduct questions: \u003ca href=\"mailto:info@n75motorsports.ca\"\u003einfo@n75motorsports.ca\u003c\/a\u003e. Shipping questions: \u003ca href=\"mailto:shipping@n75motorsports.ca\"\u003eshipping@n75motorsports.ca\u003c\/a\u003e. We ship worldwide from Toronto.\u003c\/p\u003e","brand":"N75 Motorsports","offers":[{"title":"Default Title","offer_id":41827304439994,"sku":"2CTK124SU4V","price":999.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/Screenshot-20240416_010435_Facebook_de840e75-b921-4d0d-93a4-5de0deb9edb3.jpg?v=1713244476"},{"product_id":"veloster-n-kona-n-dct-upgraded-cold-pipe-works-with-wagner-tuning-fmic","title":"DCT Upgraded Cold Pipe (Works with Wagner Tuning FMIC)","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWORKS WITH WAGNER TUNING FMIC \/ SXTH FMIC. A must for WMI users.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis will NOT work with the OEM intercooler; however, it will with an added coupler.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra N, Hyundai Veloster N (tight fit), Hyundai Kona N and Hyundai i30N (facelift Mk3.5, 2021 on). Made for an upgraded front mount intercooler such as the Wagner Tuning FMIC \/ SXTH FMIC; with the OEM intercooler it needs an added coupler. Forge itself lists this pipe for the Elantra N 2022-2024 (pre-facelift) and 2024 on (facelift), the i30 N Mk3.5 2021 on (facelift), the Kona N and the Veloster N 2021 on (facelift).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe Forge Motorsport cold side boost pipe (charge pipe) for the 2.0T Hyundai N cars. After already developing many performance upgrades for the Hyundai i30N and Veloster N, Forge's engineers found another area for improvement on Hyundai's hot hatch: the boost pipe which runs from the outlet of the intercooler to the throttle body (cold side). Forge calls it a must have product for anyone trying to achieve the maximum performance from their i30N\/Veloster N\/Kona N.\u003c\/p\u003e\n\u003cp\u003eIt works with the Wagner Tuning FMIC \/ SXTH FMIC, and Forge says it works flawlessly with its \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift--product--2105.html\"\u003eHyundai i30N MK3.5 Intercooler\u003c\/a\u003e, its \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_Veloster_N_Facelift_Intercooler_Including_DCT--product--2112.html\"\u003eHyundai Veloster N Facelift Intercooler (including DCT)\u003c\/a\u003e and its Hyundai Kona N Intercooler. It is a must for WMI users: the Forge charge pipe has a WMI port in the most optimal spot, 8\" from the TB, allowing WMI systems to fully atomize before entry into the manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_31461jpeg.jpg\" alt=\"Forge cold side boost pipe kit for the Hyundai i30N, Kona N and Veloster N: black alloy hard pipe, silicone joiners, clamps, vacuum hose and cable ties\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eWhen Forge looked at the OE hard pipe, it was clear to see there was room for improvement. Forge increased the bore diameter by 20%, which in testing resulted in a faster spool up and a crisper power delivery. It developed a 66mm internal diameter mandrel bent alloy hard pipe to complement the transition of smooth air from the cold side of the intercooler, which also matched the size of the OEM throttle body perfectly. Accompanied by fluoro-lined high quality silicone joiners, this upgrade is the perfect addition to any highly tuned engine.\u003c\/p\u003e\n\u003cp\u003eAlloy billet CNC machined bosses are welded in-house to the mandrel bent pipework by Forge's highly skilled fabricators, so that all the original attachments fit perfectly. When compared to the OE hose the improvements are clear to see: the inlet bore diameter has been increased from 55mm to 66mm internal diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_49614jpeg.jpg\" alt=\"Forge alloy boost pipe (bottom) next to the OE cold side hose it replaces (top)\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_13356jpeg.jpg\" alt=\"OE cold side hose and Forge alloy boost pipe side by side, seen from the other end\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eAn increase in diameter of the Forge pipework allows for a greater air flow, which in turn maximises the volume of air being forced into the engine. This has the benefit of improving both performance and efficiency, especially on vehicles running aftermarket software.\u003c\/p\u003e\n\u003cp\u003eForge has also incorporated a 1\/8\u003csup\u003eth\u003c\/sup\u003e NPT water meth\/nitrous boss into the design, housed directly in front of the throttle body for maximum efficiency. This assists tuners and owners in hot climates to keep inlet air temperatures on the safer side while pushing the 2.0 Hyundai engine to its limits, for a maximum power output. The pipe is supplied with a durable black powder coated finish, and it is designed, developed, and manufactured entirely in Great Britain.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWMI port in the most optimal spot, 8\" from the TB, so WMI systems fully atomize before entry into the manifold\u003c\/li\u003e\n\u003cli\u003e1\/8\u003csup\u003eth\u003c\/sup\u003e NPT water meth\/nitrous boss directly in front of the throttle body\u003c\/li\u003e\n\u003cli\u003e66mm internal diameter: bore increased by 20%, up from 55mm on the OE hose\u003c\/li\u003e\n\u003cli\u003eIncreased diameter giving increased flow compared to OEM\u003c\/li\u003e\n\u003cli\u003eFaster spool up and crisper power delivery in Forge's testing\u003c\/li\u003e\n\u003cli\u003eMinimal airflow disruption\u003c\/li\u003e\n\u003cli\u003eMandrel bent single piece aluminium pipework\u003c\/li\u003e\n\u003cli\u003eCNC machined billet couplers\u003c\/li\u003e\n\u003cli\u003eFluoro-lined high quality silicone joiners\u003c\/li\u003e\n\u003cli\u003eSupplied with a durable black powder coated finish\u003c\/li\u003e\n\u003cli\u003eNo engine check lights (EML)\u003c\/li\u003e\n\u003cli\u003eDesigned, developed, and manufactured entirely in Great Britain\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\" alt=\"Forge Motorsport blue divider line\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_OFFZOrR8xI.png?v=1671220553\" alt=\"Forge cold side boost pipe assembled with its silicone joiners and clamps, for the Hyundai Kona N, i30N and Veloster N\" loading=\"lazy\" width=\"1001\" height=\"667\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThis pipe will NOT work with the OEM intercooler; however, it will with an added coupler. It works with the Wagner Tuning FMIC \/ SXTH FMIC and with the Forge intercoolers named above. Forge states that it will only work with aftermarket intercoolers with an outlet size of 63-67mm (cold side). On the Veloster N it is a tight fit. The welded-on bosses take all the original attachments. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003eWhy not add Forge's \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Gold_Heat_Resistant_Wrap--product--1697.html\" rel=\"noopener noreferrer\" target=\"_blank\"\u003egold tape\u003c\/a\u003e to the alloy pipe, to further reflect any heat soak from the engine and keep inlet charge temperatures as low as possible? The gold tape comes on a 5metre roll, allowing you to apply it to your Forge Motorsport product.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_77250jpeg.jpg\" alt=\"Forge boost pipe kit laid out: alloy hard pipe with its bosses, black silicone joiners, clamps, vacuum hose and cable ties\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_40183jpeg.jpg\" alt=\"Close-up of the Forge kit parts: black silicone joiner, hose clamps, vacuum hose and cable ties\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eLifetime warranty. This product is designed, developed, and manufactured entirely in Great Britain and is covered by Forge's worldwide lifetime warranty. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill it work with my factory intercooler?\u003c\/h3\u003e\n\u003cp\u003eNot on its own. It will NOT work with the OEM intercooler, but it will with an added coupler. It works with the Wagner Tuning FMIC \/ SXTH FMIC, and Forge states that it works with aftermarket intercoolers with an outlet size of 63-67mm (cold side).\u003c\/p\u003e\n\u003ch3\u003eCan I run water methanol injection through it?\u003c\/h3\u003e\n\u003cp\u003eYes. It has a WMI port in the most optimal spot, 8\" from the TB: a 1\/8\u003csup\u003eth\u003c\/sup\u003e NPT water meth\/nitrous boss directly in front of the throttle body, so WMI systems fully atomize before entry into the manifold.\u003c\/p\u003e\n\u003ch3\u003eWill it set a check engine light?\u003c\/h3\u003e\n\u003cp\u003eNo. Forge lists no engine check lights (EML).\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Veloster N?\u003c\/h3\u003e\n\u003cp\u003eYes, but it is a tight fit. Forge lists this pipe for the Veloster N 2021 on (facelift).\u003c\/p\u003e","brand":"Forge","offers":[{"title":"Default Title","offer_id":42093657358522,"sku":"FMBP7","price":459.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_ftopt5Iza8.png?v=1671220464"},{"product_id":"neodymium-magentic-oil-drain-plug-1","title":"N75 Neodymium Magnetic Oil Drain Plug - Titanium - Hyundai \/ Kia","description":"\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai and Kia models. Vehicles from the 2014 model year onward that were sold outside the US and Canada may use a different drain-plug size, which this plug may not fit; on US- and Canada-market cars we have not seen a fitment issue.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA neodymium magnetic oil drain plug, machined from 7075 aluminum and custom made for N75 Motorsports. It replaces the factory oil drain plug and holds a strong neodymium magnet at its tip. The finish is titanium, burnt-blue anodized across the hex head and threads.\u003c\/p\u003e\n\u003cp\u003eWe see this as something that should have come from the factory. Even if you are not planning any mods to your Hyundai or Kia, we suggest this drain plug to help extend the life of your motor.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/332464582_755364712421175_1579311153466989366_n.jpg?v=1677027890\" alt=\"Neodymium magnetic oil drain plug with a burnt-blue titanium-anodized hex head and threads and a bright silver magnet at the tip\" loading=\"lazy\" width=\"1000\" height=\"1000\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy a magnetic drain plug\u003c\/h2\u003e\n\u003cp\u003eFine ferrous (steel and iron) wear particles circulate in the oil. The neodymium magnet catches them and holds them at the drain plug instead of letting them pass back through the engine. At each oil change the oil drains and the captured debris stays on the magnet tip, where you can wipe it off and inspect it.\u003c\/p\u003e\n\u003ch2\u003eWhat owners report\u003c\/h2\u003e\n\u003cp\u003eOwners report a good fit and a very strong magnet. They report it captures even the smallest bits of metal and that it is good quality and a worthwhile addition for DIY oil changes.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e7075 aluminum, a high-strength aluminum alloy\u003c\/li\u003e\n\u003cli\u003eStrong neodymium magnet that captures ferrous wear particles\u003c\/li\u003e\n\u003cli\u003eTitanium, burnt-blue anodized finish\u003c\/li\u003e\n\u003cli\u003eIncludes a sealing gasket\u003c\/li\u003e\n\u003cli\u003eCustom made for N75 Motorsports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Titanium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFit it in place of the factory oil drain plug during an oil change, using the supplied sealing gasket, and tighten to the vehicle manufacturer's specified drain-plug torque. Wipe the magnet tip clean and inspect it at each oil change.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt fits Hyundai and Kia models, with the 2024-model-year caveat above for cars sold outside the US and Canada. If you are unsure, email info@n75motorsports.ca with your car and we will check.\u003c\/p\u003e\n\u003ch3\u003eWhat does a magnetic drain plug do?\u003c\/h3\u003e\n\u003cp\u003eThe magnet catches ferrous metal particles in the oil so they stop circulating through the engine, and you can inspect the tip at each oil change.\u003c\/p\u003e\n\u003ch3\u003eWhat is it made of?\u003c\/h3\u003e\n\u003cp\u003e7075 aluminum, with a neodymium magnet at the tip and a sealing gasket.\u003c\/p\u003e","brand":"N75 Motorsports","offers":[{"title":"Titanium","offer_id":42268632055994,"sku":"T-11","price":27.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/332464582_755364712421175_1579311153466989366_n.jpg?v=1677027890"},{"product_id":"1-6t-hyundai-kia-gamma-2-charge-pipe-elantra-sport-kia-forte-gt-veloster-turbo-2","title":"1.6T Hyundai Kia Gamma 2 Charge Pipe [Elantra Sport \/ Kia Forte GT \/ Veloster Turbo 2]","description":"\u003cp\u003e\u003cstrong\u003eON ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHot and Cold side: both charge pipes are in this kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e The Hyundai\/Kia 1.6T Gamma 2, listed for the Hyundai Elantra Sport, Kia Forte GT and Veloster Turbo 2. Vehicle applications: 2017-2020 Hyundai Elantra, 2018-2020 Hyundai Elantra GT and 2017-2023 Hyundai i30 (non-US model), all with the L4 1.6L (t) gas engine. aFe's current list for this kit is the 2017-2020 Elantra, the 2018-2020 Elantra GT, the 2017-2025 i30 (non-US model) and the 2019-2024 Kia Forte GT, all L4-1.6L (t); aFe does not list the Veloster.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eaFe POWER's BladeRunner hot and cold charge pipe kit. Directly replace your Elantra's restrictive charge pipes with aFe POWER's BladeRunner free-flowing, heat-resistant aluminum charge pipes, for dyno-proven gains of +5 HP and +8 Lbs. x Ft. of torque. In aFe's words: when it comes to engineering for power, performance, protection and value, aFe POWER is the only choice.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/46-20634-b_1.1687898962.jpg?v=1688852108\" alt=\"aFe BladeRunner hot side and cold side charge pipes in wrinkle black, with silicone couplings and clamps\" loading=\"lazy\" width=\"1600\" height=\"1200\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eSmooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. The charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. The aluminum pipes are TIG-welded: 2-1\/4\" on the hot side and 2-1\/2\" on the cold side.\u003c\/p\u003e\n\u003cp\u003eThis kit includes high-quality, stainless-steel SmartSeal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. It is finished in wrinkle black powder coating with a unique laser-etched aFe power logo for a custom look.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDyno-proven gains of +5 HP and +8 Lbs. x Ft. TQ\u003c\/li\u003e\n\u003cli\u003eHot side outflows the factory charge pipe by up to +14%\u003c\/li\u003e\n\u003cli\u003eCold side outflows the factory charge pipe by up to +18%\u003c\/li\u003e\n\u003cli\u003eTIG-welded 2-1\/4\" hot side and 2-1\/2\" cold side aluminum pipes\u003c\/li\u003e\n\u003cli\u003ePremium stainless-steel SmartSeal clamps and 5-ply silicone couplings\u003c\/li\u003e\n\u003cli\u003eBuilt-in CNC machined aluminum blow off valve adapter\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT ports are provided for connecting sensors or water methanol injection\u003c\/li\u003e\n\u003cli\u003ePowder coated wrinkle black for heat and corrosion resistance\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/46-20634-b_2.1687898962.jpg?v=1688852115\" alt=\"Exploded view of the aFe BladeRunner charge pipe kit: hot and cold side pipes, silicone couplings and clamps\" loading=\"lazy\" width=\"1600\" height=\"1200\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe hot side and cold side pipes directly replace the factory charge pipes. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003eEmissions disclaimer: this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. See also aFe's \u003ca href=\"https:\/\/afepower.com\/prop-65\"\u003eProp 65 Warning\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/46-20634-b_ls1.1687898962.jpg?v=1688852594\" alt=\"aFe BladeRunner charge pipe installed in a Hyundai 1.6 T-GDI engine bay\" loading=\"lazy\" width=\"1600\" height=\"1200\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eaFe Power gives a 2-year warranty on the components of its intercoolers and charge pipes and 90 days on the finish, to the original purchaser with proof of purchase; parts used on race vehicles are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes the kit include both charge pipes?\u003c\/h3\u003e\n\u003cp\u003eYes. It includes the hot side and the cold side.\u003c\/p\u003e\n\u003ch3\u003eHow much power does it add?\u003c\/h3\u003e\n\u003cp\u003eDyno-proven gains are +5 HP and +8 Lbs. x Ft. of torque. The hot side outflows the factory charge pipe by up to +14% and the cold side by up to +18%.\u003c\/p\u003e\n\u003ch3\u003eCan I connect sensors or water methanol injection?\u003c\/h3\u003e\n\u003cp\u003eYes. 1\/8\" NPT ports are provided for connecting sensors or water methanol injection.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Veloster Turbo 2?\u003c\/h3\u003e\n\u003cp\u003eThis kit is listed for the Veloster Turbo 2, but aFe's own application list for this kit does not include the Veloster. Contact us before ordering one for a Veloster.\u003c\/p\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":42517005107386,"sku":"46-20634","price":680.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/46-20634-b_1.1687898962.jpg?v=1688852108"},{"product_id":"super-turbo-racing-5w40","title":"SUPER TURBO RACING 5W40 (4L)","description":"\u003cp\u003e\u003cstrong\u003eON ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: compatible with a stock grade #W 40.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eHKS Super Turbo Racing 5W40 is a 100% synthetic engine oil with protection against LSPI (low-speed pre-ignition), sold here in the 4 Litre size. HKS gives its allowable maximum temperature (High) as 140℃, and it is compatible with a stock grade #W 40.\u003c\/p\u003e\n\u003cp\u003eHKS lists it in its Super Oil range, which HKS describes as a tuning part to improve engine performance, not just maintenance: it delivers stable performance and has high film retention ability even at high rpm and in the high-temperature range.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/52001-AK124_125_140.jpg?v=1696971385\" alt=\"HKS Super Turbo Racing 5W40 LSPI-compatible 100% synthetic motor oil, 1 litre and 4 litre cans\" loading=\"lazy\" width=\"320\" height=\"304\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"198\" src=\"https:\/\/www.youtube.com\/embed\/-3Vpz8sFmfk\" width=\"350\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eHKS rates its oils against each other on the HKS motor oil comparison chart, a radar chart shown below, where Super Racing Oil is indicated in GREEN. The breakdown of the radar chart:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat resistance:\u003c\/strong\u003e the rate of oxidation after the engine high-load.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil film strength:\u003c\/strong\u003e high temperature high shear viscosity (High Shear Rate at 150°C).*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance to high-temp deterioration:\u003c\/strong\u003e degree of change in kinematic viscosity at 100 °C after the high-load.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultigrade:\u003c\/strong\u003e viscosity index.**\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance to low-temp deterioration:\u003c\/strong\u003e degree of change in kinematic viscosity at 100 °C after the high-load.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil life (Daily-use):\u003c\/strong\u003e ability to breakdown dirt (such as soot) and maintain oil performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCosts:\u003c\/strong\u003e market price.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*depends on the quality of base oil.\u003c\/p\u003e\n\u003cp\u003e**depends on the quality of base oil as well as the additive used.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 Litre\u003c\/li\u003e\n\u003cli\u003e5W40, 100% SYNTHETIC\u003c\/li\u003e\n\u003cli\u003eCompatible with a stock grade #W 40\u003c\/li\u003e\n\u003cli\u003eAllowable maximum temperature (High): 140℃\u003c\/li\u003e\n\u003cli\u003eProtection against LSPI\u003c\/li\u003e\n\u003cli\u003eHKS Oil series specifications list it in the Super Racing range as the TURBO 5W40: density 0.85 g\/cm³ at 15°C, 87.3 mm2\/s at 40°C, 14.88 mm2\/s at 100°C, viscosity index 179, total base number 8.6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/HKS_Oil_Radar_chart_Category_2.png?v=1696971385\" alt=\"HKS motor oil comparison radar chart rating Premium Pro, Racing Pro, Super Racing (green), Super Oil Premium, Super Oil and OEM oil\" loading=\"lazy\" width=\"1001\" height=\"731\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eUse it at your oil change in an engine with a stock grade of #W 40: HKS says it is compatible with a stock grade #W 40. We recommend an oil change by a qualified technician. Contact us before ordering if you have questions about which grade your engine needs.\u003c\/p\u003e\n\u003cp\u003eThe HKS Oil series specifications for the Super Racing range are in the chart below.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/HKS_oil_spec_of_Super_Racing_Category_02_2.png?v=1696971385\" alt=\"HKS Oil series specifications table for the Super Racing range: NA 0W40, TURBO 5W40, TURBO 15W50, BOXER 10W40 and ROTARY 10W40\" loading=\"lazy\" width=\"1794\" height=\"647\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat grade and size is this?\u003c\/h3\u003e\n\u003cp\u003e5W40, 100% synthetic, in the 4 Litre size.\u003c\/p\u003e\n\u003ch3\u003eWill it suit my engine?\u003c\/h3\u003e\n\u003cp\u003eHKS says it is compatible with a stock grade #W 40. Contact us before ordering if you are not sure which grade your engine needs.\u003c\/p\u003e\n\u003ch3\u003eDoes it protect against LSPI?\u003c\/h3\u003e\n\u003cp\u003eYes. HKS lists protection against LSPI (low-speed pre-ignition).\u003c\/p\u003e\n\u003ch3\u003eHow hot can it run?\u003c\/h3\u003e\n\u003cp\u003eHKS gives an allowable maximum temperature (High) of 140℃.\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":42684122529978,"sku":"52001-AK125","price":149.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/52001-AK124_125_140.jpg?v=1696971385"},{"product_id":"super-turbo-racing-5w40-1l","title":"SUPER TURBO RACING 5W40 (1L)","description":"\u003cp\u003e\u003cstrong\u003eON ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: compatible with a stock grade #W 40.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eHKS Super Turbo Racing 5W40 is a 100% synthetic engine oil with protection against LSPI (low-speed pre-ignition), sold here in the 1 Litre size. HKS gives its allowable maximum temperature (High) as 140℃, and it is compatible with a stock grade #W 40.\u003c\/p\u003e\n\u003cp\u003eHKS lists it in its Super Oil range, which HKS describes as a tuning part to improve engine performance, not just maintenance: it delivers stable performance and has high film retention ability even at high rpm and in the high-temperature range.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/52001-AK124_125_140_1ea64ede-090a-4ac0-8d9e-9f1472220bde.jpg?v=1696973619\" alt=\"HKS Super Turbo Racing 5W40 LSPI-compatible 100% synthetic motor oil, 1 litre and 4 litre cans\" loading=\"lazy\" width=\"320\" height=\"304\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"198\" src=\"https:\/\/www.youtube.com\/embed\/-3Vpz8sFmfk\" width=\"350\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eHKS rates its oils against each other on the HKS motor oil comparison chart, a radar chart shown below, where Super Racing Oil is indicated in GREEN. The breakdown of the radar chart:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat resistance:\u003c\/strong\u003e the rate of oxidation after the engine high-load.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil film strength:\u003c\/strong\u003e high temperature high shear viscosity (High Shear Rate at 150°C).*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance to high-temp deterioration:\u003c\/strong\u003e degree of change in kinematic viscosity at 100 °C after the high-load.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultigrade:\u003c\/strong\u003e viscosity index.**\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance to low-temp deterioration:\u003c\/strong\u003e degree of change in kinematic viscosity at 100 °C after the high-load.*\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil life (Daily-use):\u003c\/strong\u003e ability to breakdown dirt (such as soot) and maintain oil performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCosts:\u003c\/strong\u003e market price.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*depends on the quality of base oil.\u003c\/p\u003e\n\u003cp\u003e**depends on the quality of base oil as well as the additive used.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 Litre\u003c\/li\u003e\n\u003cli\u003e5W40, 100% SYNTHETIC\u003c\/li\u003e\n\u003cli\u003eCompatible with a stock grade #W 40\u003c\/li\u003e\n\u003cli\u003eAllowable maximum temperature (High): 140℃\u003c\/li\u003e\n\u003cli\u003eProtection against LSPI\u003c\/li\u003e\n\u003cli\u003eHKS Oil series specifications list it in the Super Racing range as the TURBO 5W40: density 0.85 g\/cm³ at 15°C, 87.3 mm2\/s at 40°C, 14.88 mm2\/s at 100°C, viscosity index 179, total base number 8.6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/HKS_Oil_Radar_chart_Category_2_10881a05-da59-4b2b-a8f1-cf6b6a913cc5.png?v=1696973619\" alt=\"HKS motor oil comparison radar chart rating Premium Pro, Racing Pro, Super Racing (green), Super Oil Premium, Super Oil and OEM oil\" loading=\"lazy\" width=\"1001\" height=\"731\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eUse it at your oil change in an engine with a stock grade of #W 40: HKS says it is compatible with a stock grade #W 40. We recommend an oil change by a qualified technician. Contact us before ordering if you have questions about which grade your engine needs.\u003c\/p\u003e\n\u003cp\u003eThe HKS Oil series specifications for the Super Racing range are in the chart below.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/HKS_oil_spec_of_Super_Racing_Category_02_2_e7c70f3b-fffc-4aa2-a4cb-27c636394fe2.png?v=1696973619\" alt=\"HKS Oil series specifications table for the Super Racing range: NA 0W40, TURBO 5W40, TURBO 15W50, BOXER 10W40 and ROTARY 10W40\" loading=\"lazy\" width=\"1794\" height=\"647\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat grade and size is this?\u003c\/h3\u003e\n\u003cp\u003e5W40, 100% synthetic, in the 1 Litre size.\u003c\/p\u003e\n\u003ch3\u003eWill it suit my engine?\u003c\/h3\u003e\n\u003cp\u003eHKS says it is compatible with a stock grade #W 40. Contact us before ordering if you are not sure which grade your engine needs.\u003c\/p\u003e\n\u003ch3\u003eDoes it protect against LSPI?\u003c\/h3\u003e\n\u003cp\u003eYes. HKS lists protection against LSPI (low-speed pre-ignition).\u003c\/p\u003e\n\u003ch3\u003eHow hot can it run?\u003c\/h3\u003e\n\u003cp\u003eHKS gives an allowable maximum temperature (High) of 140℃.\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":42684596977850,"sku":"52001-AK124","price":40.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/52001-AK124_125_140_1ea64ede-090a-4ac0-8d9e-9f1472220bde.jpg?v=1696973619"}],"url":"https:\/\/n75motorsports.ca\/collections\/engine-components\/veloster-n.oembed?page=4","provider":"N75 MotorSports","version":"1.0","type":"link"}