{"title":"Kia","description":"","products":[{"product_id":"oil-change-kit","title":"Oil Change Kit in a Box 5w40 Motul X-cess Gen2  \/ WIX XP","description":"\u003cp\u003e\u003cstrong\u003eAlways In Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e The Hyundai and Kia 1.6T Gamma engine found in the N Line, Elantra Sport, Tucson, Veloster and various Kia models.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eEverything you need for an oil change on the 1.6T Gamma engine, in one box: a 1x5L Jug of Motul X-cess Gen2 5w40 and a WIX XP oil filter. Motul X-cess Gen 2 is the new standard for turbocharged GDI engines, and 5w40 is recommended by Hyundai.\u003c\/p\u003e\n\u003cp\u003eWe also decided to go with a WIX XP oil filter. The OEM Hyundai one is a good filter no doubt, but we weighed both filters and cut them apart: the WIX XP is a much thicker filter and is significantly heavier, which proves it's built tough. The WIX XP filter is also made to OEM spec, meaning it has an anti drain back valve so we do not lose oil pressure on cold start. The Hyundai OEM filter costs us less money; if we thought it was a better filter we would include it with this kit, however we believe this is the best filter for our platform.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/CollageMaker_20201107_144808779.jpg?v=1604778558\" alt=\"Motul 8100 X-cess gen2 5W-40 5 litre jug and WIX XP oil filter, the two parts of the oil change kit\" loading=\"lazy\" width=\"4096\" height=\"4096\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe kit includes a 1x5L Jug of Motul X-cess Gen2 5w40 and 1x WIX XP Oil Filter. The 5L jug is more than enough to do an oil change: you will be left with .5 to .75 of a L. These are spill proof bottles, even after reopening, so it is the perfect amount to keep in the trunk for a rainy day when you forget to do an oil change and your oil level has dropped a little.\u003c\/p\u003e\n\u003cp\u003eThe WIX XP is an OE replacement, spin-on lube filter made to OEM spec, with an anti drain back valve so the engine does not lose oil pressure on cold start.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x5L Jug of Motul X-cess Gen2 5w40, the new standard for turbocharged GDI engines\u003c\/li\u003e\n\u003cli\u003eMore than enough for one oil change, with .5 to .75 of a L left over\u003c\/li\u003e\n\u003cli\u003eSpill proof bottle, even after reopening\u003c\/li\u003e\n\u003cli\u003e1x WIX XP Oil Filter: much thicker and significantly heavier than the OEM Hyundai filter, made to OEM spec with an anti drain back valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWIX XP oil filter specifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOE Replacement Oil Filter\u003c\/li\u003e\n\u003cli\u003eStyle: Spin-On Lube Filter\u003c\/li\u003e\n\u003cli\u003eClass: A\u003c\/li\u003e\n\u003cli\u003eDuty Type: LD\u003c\/li\u003e\n\u003cli\u003eHeight: 3.24\"\u003c\/li\u003e\n\u003cli\u003eInner Diameter Top: Closed\u003c\/li\u003e\n\u003cli\u003eMedia Type: Enhanced Cellulose\u003c\/li\u003e\n\u003cli\u003eMicron: 19 Micron\u003c\/li\u003e\n\u003cli\u003eOuter Diameter Top: 3.15\"\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: 280 PSI\u003c\/li\u003e\n\u003cli\u003eBeta Ratio: 2\/20 - 6\/20\u003c\/li\u003e\n\u003cli\u003eBy-Pass Valve Setting: 8-11\u003c\/li\u003e\n\u003cli\u003eFlow Rate: 9-11 GPM\u003c\/li\u003e\n\u003cli\u003eThread Size: 20 x 1.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wix_8f4a35e2-5480-4e65-bf0d-f38591191ecb.jpg?v=1604778558\" alt=\"WIX XP spin-on oil filter\" loading=\"lazy\" width=\"1080\" height=\"1229\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd N75 Magnetic Oil Drain Plug:\u003c\/strong\u003e No or Yes. Choose Yes to add an N75 magnetic oil drain plug to the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eUse the kit for an oil change on the 1.6T Gamma engine: one WIX XP filter and the 5L jug of Motul X-cess Gen2 5w40, which is more than enough to do an oil change. Keep the .5 to .75 of a L left over in the spill proof jug in your trunk, for a rainy day when you forget to do an oil change and your oil level has dropped a little.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201106_172659_8655726c-68e1-49ba-bb62-ddfaa328ca70.jpg?v=1604778558\" alt=\"Motul 8100 X-cess gen2 5W-40 engine oil, 5 litre jug, front label\" loading=\"lazy\" width=\"1080\" height=\"1340\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is in the kit?\u003c\/h3\u003e\n\u003cp\u003eA 1x5L Jug of Motul X-cess Gen2 5w40 and 1x WIX XP Oil Filter. Choose Yes on the option to add an N75 magnetic oil drain plug.\u003c\/p\u003e\n\u003ch3\u003eWhich engine is it for?\u003c\/h3\u003e\n\u003cp\u003eThe 1.6T Gamma engine found in the N Line, Elantra Sport, Tucson, Veloster and various Kia models.\u003c\/p\u003e\n\u003ch3\u003eWhy a WIX XP filter instead of the Hyundai OEM filter?\u003c\/h3\u003e\n\u003cp\u003eWe weighed both filters and cut them apart. The WIX XP is a much thicker filter, significantly heavier, and made to OEM spec with an anti drain back valve. The OEM filter costs us less money, but we believe the WIX XP is the best filter for our platform.\u003c\/p\u003e\n\u003ch3\u003eWill I have oil left over?\u003c\/h3\u003e\n\u003cp\u003eYes. The 5L jug is more than enough to do an oil change, and you will be left with .5 to .75 of a L to keep in the trunk.\u003c\/p\u003e","brand":"Motul Wix","offers":[{"title":"No","offer_id":44424955691194,"sku":"K-1","price":105.0,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":44424955723962,"sku":"K-2","price":125.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/CollageMaker_20201107_144808779.jpg?v=1604778558"},{"product_id":"hot-pipe-resonator-delete","title":"Hot Pipe Resonator Delete","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.6T turbo vehicles before 2021: the Veloster Turbo (VT1 and VT2), the 1.6T Elantra GT (GT Sport) and Kona 1.6T. It does not fit the Kia Forte GT.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA resonator delete for the 1.6T hot pipe, the charge pipe that feeds the intercooler. It replaces the factory resonator section, the part with the internal braided-mesh resonator band, with a smooth metal pipe. We make it in Canada; N75 Motorsports is dedicated to Canadian development and manufacturing.\u003c\/p\u003e\n\u003cp\u003eA resonator delete is a popular mod among Hyundai and Kia owners. We make no power claims for this part. Owners report good build quality, a change in sound, and quick, well-packed delivery. One owner with a 2018 Elantra Sport reports the car sounds the way they wanted after adding this delete alongside a muffler delete and a downpipe.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/received_1024434588052005.jpg?v=1619744734\" alt=\"Factory 1.6T hot pipe resonator section with its braided-mesh band next to the smooth N75 metal resonator delete pipe on a workbench\" loading=\"lazy\" width=\"960\" height=\"720\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe delete is a metal pipe that replaces the factory resonator section in the hot pipe. We roll the bead three times to form a large retaining lip at the end of the pipe. The large lip lets you reuse the OEM hose clamps and resists the delete popping off under boost, which is why T-clamps are not required.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMade in Canada by N75 Motorsports\u003c\/li\u003e\n\u003cli\u003eMetal delete pipe that replaces the factory resonator section in the hot pipe\u003c\/li\u003e\n\u003cli\u003eTriple-rolled bead forming a large retaining lip\u003c\/li\u003e\n\u003cli\u003eDesigned to reuse the OEM hose clamps\u003c\/li\u003e\n\u003cli\u003eT-clamps optional for the most secure hold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/1619744628836.jpg?v=1619744734\" alt=\"Close-up of the triple-rolled bead lip at the end of an N75 metal resonator delete pipe, with more delete pipes behind it\" loading=\"lazy\" width=\"3024\" height=\"3024\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eRemove the factory resonator section from the hot pipe and fit the delete pipe in its place, then clamp each end. Reuse the OEM clamps, or fit new hose clamps, since the OEM clamps are not always reusable. T-clamps give the most secure hold if you want extra certainty; they are available locally almost anywhere. A little hairspray on the pipe before fitting helps the rubber hose grip the metal. The delete pipe is supplied on its own, without clamps.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes it come with clamps?\u003c\/h3\u003e\n\u003cp\u003eNo, the delete pipe only. Reuse your OEM clamps or fit new hose clamps; T-clamps are optional.\u003c\/p\u003e\n\u003ch3\u003eWill it blow off under boost?\u003c\/h3\u003e\n\u003cp\u003eThe triple-rolled bead forms a large lip, so the OEM clamps hold the delete in place. T-clamps give the most secure hold if you want extra certainty.\u003c\/p\u003e\n\u003ch3\u003eDoes it add power?\u003c\/h3\u003e\n\u003cp\u003eWe make no power claims for the resonator delete.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt fits 1.6T turbo vehicles before 2021: the Veloster Turbo (VT1 and VT2), the 1.6T Elantra GT (GT Sport) and Kona 1.6T. It does not fit the Kia Forte GT.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"Default Title","offer_id":31524255694871,"sku":"2400","price":45.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/received_1024434588052005.jpg?v=1619744734"},{"product_id":"mach-2-tms-recirculating-valve-for-hyundai-kia-1-6-t-gdi-direct-fitment","title":"MACH 2 TMS RECIRCULATING VALVE1.6 T-GDI DIRECT FITMENT","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.4TGDI and 1.6TGDI: Hyundai Elantra GT Sport 2018, Hyundai Elantra GT N Line 2019-2020, Hyundai Elantra Sport 2017-2020, Hyundai Veloster Turbo 2019-2021, Kia Forte GT 2020-CUR, Kia Forte5 2020-CUR and Hyundai i30 Models 1.4T\/1.6T. GFB's own application list for this valve also includes the Hyundai Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), Tucson 1.6 GDI Turbo (facelift) 2019-2020 and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAll the performance with or without the noise! The GFB Mach 2 is a TMS recirculating valve, direct fitment for the Hyundai and Kia 1.6 T-GDI. GFB's Mach 2 utilises GFB's proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce.\u003c\/p\u003e\n\u003cp\u003eWith its single venting outlet, the Mach 2 is configured from the factory for full recirculation (i.e. plumb back, diverter, bypass) venting for the performance-minded who just want the benefits without the sound.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9111.jpg?v=1590729846\" alt=\"GFB Mach 2 recirculating diverter valve for the Hyundai and Kia 1.6T, black body with silver outlet and brass vacuum fitting\" loading=\"lazy\" width=\"1600\" height=\"1466\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Mach 2 has a single venting outlet and is factory configured for full recirculating operation, as a direct factory replacement. GFB's TMS Technology gives up to 30% faster boost recovery on gearshift, and the valve can be configured for full atmosphere venting with a separate atmosphere conversion kit.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSingle venting outlet, factory configured for full recirculating operation\u003c\/li\u003e\n\u003cli\u003eConfigure for full atmosphere venting with separate atmosphere conversion kit\u003c\/li\u003e\n\u003cli\u003eTMS Technology for up to 30% faster boost recovery on gearshift\u003c\/li\u003e\n\u003cli\u003eHuge range of direct bolt-on kits\u003c\/li\u003e\n\u003cli\u003e100psi+ boost holding ability\u003c\/li\u003e\n\u003cli\u003eManufactured in Australia \u003ca href=\"https:\/\/www.gfbuk.com\/iso-9001.accreditation.cfm\"\u003ein accordance with ISO 9001\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Pierburg BOV Solenoid:\u003c\/strong\u003e No (the GFB valve on its own) or Yes (the valve with a Pierburg BOV solenoid added).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eA direct fitment in the factory location. GFB's instructions: remove the airbox for access, take the recirc hose off the factory diverter valve, remove the factory valve (4 screws, 10mm socket), check the brown o-ring is in the groove on the underside of the Mach 2, install it in the factory location with the supplied longer screws and 5mm hex key, then refit the recirc and vacuum hoses and the airbox. GFB says that because the Mach 2 is fully recirculated and these cars have no MAF sensor, the spring pre-load adjustment is not critical and the valve can be used straight out of the box. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGo Fast Bits gives the original owner a limited lifetime warranty against defective materials or faulty workmanship, once the product is registered on GFB's website. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003e1.4TGDI and 1.6TGDI: the Hyundai Elantra GT Sport 2018, Elantra GT N Line 2019-2020, Elantra Sport 2017-2020, Veloster Turbo 2019-2021, Kia Forte GT 2020-CUR, Kia Forte5 2020-CUR and Hyundai i30 Models 1.4T\/1.6T. GFB also lists the Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), Tucson 1.6 GDI Turbo (facelift) 2019-2020 and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch3\u003eIs it loud?\u003c\/h3\u003e\n\u003cp\u003eNo. It is factory configured for full recirculation, for the benefits without the sound. You can configure it for full atmosphere venting with a separate atmosphere conversion kit.\u003c\/p\u003e\n\u003ch3\u003eHow much boost can it hold?\u003c\/h3\u003e\n\u003cp\u003e100psi+. Put simply, it can hold more boost than any turbo could produce.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eYes, FREE SHIPPING.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"No","offer_id":37387351294138,"sku":"T9111","price":229.99,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":37387351261370,"sku":"","price":359.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9111.jpg?v=1590729846"},{"product_id":"hybrid-dual-outlet-valve-3-valves-in-one-diverter-valve-bov","title":"1.6T Hybrid Dual Outlet Valve 1.6T (3 Valves in one)","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra Sport 2017-2020, Hyundai Elantra GT Sport 2018, Hyundai Elantra GT N Line 2019-2020, Hyundai Veloster Turbo 2 2019-2020, Hyundai Kona, Kia Forte GT 2020-current and Kia Forte5, with the 1.4GDI and 1.6TGDI engines. GFB lists this valve for the Hyundai Elantra Sport 1.6 T-GDI 2016-2020, Elantra GT 1.6 T-GDI 2016-2020, Veloster 1.6 GDI Turbo 2019-on, Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), i30 SR\/N-Line Hatch 1.6T-GDI (PD, 2016-on) and Tucson 1.6 GDI Turbo (facelift) 2019-2020, and the Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe GFB Hybrid dual outlet diverter valve \/ BOV: 3 valves in one, because it can be configured for full recirc, full atmosphere, or 50\/50 venting. GFB brought the Hybrid back to celebrate 20 years since the world's first dual outlet blow-off valve.\u003c\/p\u003e\n\u003cp\u003eIn a time before Justin Bieber, Y2K, and even Google, the year is 1998 and GFB's founding engineer John Adrian is so sick of his new WRX stalling with an atmosphere-venting BOV that he decided he didn't want to live in a world any longer without a dual port BOV... so he invented it! Known as the \"Hybrid\", this world-first became the flagship model of the newly formed company Go Fast Bits. Grab a piece of history for your car now.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9211_web.jpg?v=1590730264\" alt=\"GFB Hybrid dual outlet diverter valve for the Hyundai and Kia 1.6T, with aluminium recirculation outlet, black trumpet and two blanking plugs\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe two venting ports of the original Hybrid were staged on the body so that the recirc port opened before the atmo port, helping to prevent backfiring and stalling on cars with a MAF sensor, whilst still giving the signature blow off sound when the car is driven harder. The new Hybrid has the same staged venting outlets as the original, but now with the ability to configure for full recirc, full atmosphere, or 50\/50 venting, and a huge range of direct bolt-on kits for popular vehicles: all the benefits of dual port venting, at an affordable price.\u003c\/p\u003e\n\u003cp\u003eThis innovation was so successful that the technology has since been adopted by almost every other BOV brand on the market. The Hybrid then went on to evolve into GFB's next world-first, the venting bias adjustable BOV now known as the Respons TMS, and then into the electronically adjustable version, the Deceptor Pro. With the spotlight on those products the Hybrid was absent from the market for some time, and GFB brought it back in celebration of the 20 years since the invention of one of the most influential BOVs the turbo world has seen. As a fitting birthday present, the importance of the dual-port venting system and the new Hybrid valve was recognized from a field of 3000 entries by a panel of international judges and presented with a Global Media Award at the 2017 SEMA show.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 valves in one, diverter valve\/BOV: configure for full recirc, full atmosphere, or 50\/50 venting\u003c\/li\u003e\n\u003cli\u003eStaged venting outlets: the recirc port opens before the atmo port, helping to prevent backfiring and stalling on cars with a MAF sensor\u003c\/li\u003e\n\u003cli\u003eSignature blow off sound when the car is driven harder\u003c\/li\u003e\n\u003cli\u003ePart of GFB's huge range of direct bolt-on Hybrid kits for popular vehicles\u003c\/li\u003e\n\u003cli\u003eGlobal Media Award at the 2017 SEMA show, chosen from a field of 3000 entries by a panel of international judges\u003c\/li\u003e\n\u003cli\u003eCelebrates 20 years since GFB invented the world's first dual outlet blow-off valve in 1998\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Pierburg BOV Solenoid:\u003c\/strong\u003e No is the Hybrid valve only. Yes adds a Pierburg BOV solenoid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eGFB's own vehicle list for this valve is on GFB's website. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGFB (Go Fast Bits) gives the original owner a limited lifetime warranty against defective materials or faulty workmanship; register the product on GFB's website to activate it. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Elantra GT N Line 2019-2020, Veloster Turbo 2 2019-2020 and Kona, and the Kia Forte GT 2020-current and Forte5, with the 1.4GDI and 1.6TGDI engines.\u003c\/p\u003e\n\u003ch3\u003eWhat does 3 valves in one mean?\u003c\/h3\u003e\n\u003cp\u003eThe Hybrid can be configured for full recirc, full atmosphere, or 50\/50 venting.\u003c\/p\u003e\n\u003ch3\u003eWill it make my car stall?\u003c\/h3\u003e\n\u003cp\u003eThe recirc port opens before the atmo port, which helps to prevent backfiring and stalling on cars with a MAF sensor, whilst still giving the signature blow off sound when the car is driven harder.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eFREE SHIPPING to Canada and US.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"No","offer_id":37387360501946,"sku":"T9211","price":269.99,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":37387360469178,"sku":"","price":389.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9211_web.jpg?v=1590730264"},{"product_id":"gfb-bov-t9011-adjustable-bov","title":"1.6T Adjustable BOV","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.4T GDI and 1.6T GDI: Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Veloster Turbo 2 2019-2020, Elantra GT N Line 2019-2020 and Kia Forte GT 2020-CUR. GFB's own application list also includes the Hyundai Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), Tucson 1.6 GDI Turbo (facelift) 2019-2020, i30 SR\/N-Line Hatch 1.6T-GDI (PD, 2016-on) and Kia Cerato 1.6 T-GDI 2018-on. Note: this product has fitment notes for some models. \u003ca href=\"https:\/\/gfb.com.au\/products\/blow-off-and-diverter-valves\/respons-tms\/respons-tms-direct-fit-blow-off-valve-or-bov-patented-adjustable-venting-bias-system-diverter-valve\/#tab-vehicle_information\"\u003eClick Here\u003c\/a\u003e for more information.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe GFB Respons TMS is a direct fit blow off valve (BOV) and diverter valve with GFB's patented adjustable venting bias system, for the cars above. GFB's Sound Adjustment System lets you infinitely vary how much air is recirculated or vented to atmosphere, like a volume control: simply by twisting the adjustment ring, you can change the sound of your BOV from silent to ear-shattering, or anywhere in between.\u003c\/p\u003e\n\u003cp\u003eGFB says it is a true bolt-on: everything you need is included, it fits directly in the factory location (not on a separate adaptor), and no modifications to the car are required.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9011_web.jpg?v=1590730729\" alt=\"GFB Respons TMS blow-off valve for the Hyundai and Kia 1.6T, black body with silver inlet, brass vacuum fitting and black trumpet\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Respons has two venting outlets: recirc, and a trumpet that vents to atmosphere. Twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed. This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between. Fully anti-clockwise is 100% recirculation venting, the same as the stock valve and the quietest setting; fully clockwise opens the trumpet port for the loudest sound.\u003c\/p\u003e\n\u003cp\u003eIt works on GFB's TMS (Turbo Management System) principle: a factory bypass valve is open until required to shut, while a GFB TMS valve is shut until required to open, so it only vents when required, and only enough air to prevent compressor surge. GFB's tests show the Respons can return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears. Its balanced piston design uses boost pressure on either side to cancel out the forces, so high boost cannot force it open.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGFB Respons TMS for Hyundai and Kia 1.6T GDI applications\u003c\/li\u003e\n\u003cli\u003ePatented adjustable venting bias system: from 100% recirc (silent) to 100% atmosphere (loud), or anywhere in between\u003c\/li\u003e\n\u003cli\u003eChange the sound simply by twisting the adjustment ring\u003c\/li\u003e\n\u003cli\u003eTMS (Turbo Management System): up to 30% faster return to peak boost on gearshift in GFB's tests\u003c\/li\u003e\n\u003cli\u003eBalanced piston design: holds unlimited boost pressure\u003c\/li\u003e\n\u003cli\u003eDirect fit: bolts into the factory location with everything you need included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Respons-640.gif?v=1592193253\" alt=\"Hand holding the black trumpet of a GFB Respons valve\" loading=\"lazy\" width=\"640\" height=\"480\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Pierburg BOV Solenoid:\u003c\/strong\u003e No (the GFB valve on its own) or Yes (the valve with a Pierburg BOV solenoid added).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eGFB's instructions: remove the airbox for access, take the recirc hose off the factory diverter valve, then remove the factory valve (4 screws, 10mm socket). Check the brown o-ring is in the groove on the underside of the Respons, install it in the factory location with the supplied longer screws and 5mm hex key, refit the recirc and vacuum hoses and their clamps, and reinstall the airbox. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003eHyundai uses an ECU-controlled solenoid valve to switch the top port of the BOV from boost to vacuum when it requires it to open, so the ECU largely decides when the valve vents. GFB notes it may appear to vent at odd times, or not at all at low load, and that this is normal. The spring pre-load screw in the centre of the cap sets how easily it blows off and how long the sound lasts.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGo Fast Bits gives the original owner a limited lifetime warranty against defective materials or faulty workmanship, once the product is registered on GFB's website. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003e1.4T GDI and 1.6T GDI: the Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Veloster Turbo 2 2019-2020, Elantra GT N Line 2019-2020 and Kia Forte GT 2020-CUR. GFB also lists the Kona 1.6T-GDI (2017-2020, Gamma engine G4FJ), Tucson 1.6 GDI Turbo (facelift) 2019-2020, i30 SR\/N-Line Hatch 1.6T-GDI and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch3\u003eCan I make it quiet or loud?\u003c\/h3\u003e\n\u003cp\u003eYes. Twist the adjustment ring: fully anti-clockwise is 100% recirc, the same as the stock valve; fully clockwise is 100% atmosphere for the loudest sound; anywhere in between is possible.\u003c\/p\u003e\n\u003ch3\u003eWill venting to atmosphere cause stalling or backfiring?\u003c\/h3\u003e\n\u003cp\u003eGFB says there is no MAF sensor on these cars, so the ECU is completely unaffected by atmosphere venting or spring pre-load.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eFREE SHIPPING to Canada and US.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"No","offer_id":37387368464570,"sku":"T9011","price":349.99,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":37387368431802,"sku":"","price":459.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9011_web.jpg?v=1590730729"},{"product_id":"powerflex-lower-engine-mount-bushing-performance","title":"Powerflex Lower Engine Mount Bushing (Purple or Black)","description":"\u003cp\u003e\u003cstrong\u003ePURPLE IN STOCK \/ BLACK IN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN Day Sale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYellow: we no longer sell it, as we cannot stand behind this product (not recommended).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Turbo Hyundai models, 1.6T \/ 2.0T, including the I30N. Lower engine mount bushing.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003ePowerflex's lower engine mount bushing in two versions: Performance (Purple) and Race (Black). In our opinion these bushings are arguably the best mod and a must for all turbo Hyundais, 1.6T \/ 2.0T.\u003c\/p\u003e\n\u003cp\u003eThe Performance bushing is the one you want if you want the perfect mix of low vibration and engine movement: see the chart below. The Race bushing (Black) is a track geared upgrade, as stiff as possible, and vibration will be present.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/msedge_8LoOhA9Akf.png?v=1712363463\" alt=\"Aluminium lower engine mount with a purple Powerflex polyurethane bushing fitted in the large end\" loading=\"lazy\" width=\"850\" height=\"428\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003ePowerflex's bushing for the I30N replaces the original rubber bushing for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response, with reduced wheel hop and a more direct transition of power to the road.\u003c\/p\u003e\n\u003cp\u003ePowerflex rates the Performance (Purple) bushing at Shore A 80, a stiffer option for higher-powered cars that may be used on track, and the Race (Black) bushing at Shore A 95, its Black Series part for extreme track and motorsport use. Powerflex notes that stiffer materials reduce engine movement but usually transmit more noise and vibration.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the original rubber bushing in the lower engine mount\u003c\/li\u003e\n\u003cli\u003eIncreased engine stability under acceleration\u003c\/li\u003e\n\u003cli\u003eBoosts the torque reaction of the mount for improved acceleration response\u003c\/li\u003e\n\u003cli\u003eReduced wheel hop and a more direct transition of power to the road\u003c\/li\u003e\n\u003cli\u003ePerformance (Purple): Shore A 80; the perfect mix of low vibration and engine movement\u003c\/li\u003e\n\u003cli\u003eRace (Black): Shore A 95; a track geared upgrade, as stiff as possible, vibration will be present\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/powerflex_1080x_0c424ba0-fb1f-46f3-85b7-64366f04b311.jpg?v=1712363462\" alt=\"Powerflex load versus displacement chart comparing the original bush with Yellow 70, Purple 80 and Black 95 polyurethane\" loading=\"lazy\" width=\"1080\" height=\"588\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Performance (Purple); or Race (Black). Purple in stock; black in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe yellow is the 'street' bushing, made to produce no vibration at all while being as stiff as possible without the vibration. Due to issues with this product we no longer sell it.\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe bushing replaces the original rubber bushing in the lower engine mount. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_N5YI5SWXSD_74721365-8ecf-4da1-ab08-f8c4975cd4b4.png?v=1712363462\" alt=\"Shore hardness chart placing PowerFlex Yellow (Street), Purple (Street\/Performance) and Black (Race) between rubber and plastic\" loading=\"lazy\" width=\"670\" height=\"412\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003ePowerflex gives a lifetime warranty on the Performance (Purple) bushing for the original purchaser buying through an authorised distributor, limited to replacement of the supplied part; parts used for track or competition are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003ePurple or Black: which should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe Performance (Purple) bushing is the one you want for the perfect mix of low vibration and engine movement. The Race (Black) bushing is a track geared upgrade, as stiff as possible, and vibration will be present.\u003c\/p\u003e\n\u003ch3\u003eDo you still sell the yellow bushing?\u003c\/h3\u003e\n\u003cp\u003eNo. Due to issues with this product we no longer sell it; we cannot stand behind it and do not recommend it.\u003c\/p\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eTurbo Hyundai models, 1.6T \/ 2.0T, including the I30N.\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Performance (Purple)","offer_id":37740964184250,"sku":"P120P","price":70.0,"currency_code":"CAD","in_stock":true},{"title":"Race (Black)","offer_id":42979294806202,"sku":"PFF26-120BLK","price":75.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/msedge_8LoOhA9Akf.png?v=1712363463"},{"product_id":"eibach-pro-kit-suspension-lowering-springs","title":"PRO-KIT Suspension Lowering Springs ES\/EGTS\/Forte\/VT2\/N-Line","description":"\u003cp\u003e\u003cstrong\u003eON ORDER: Elantra GT Sport\/N Line on order, Elantra Sport on order\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: We special order every set we sell, 2 week shipping wait.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT Sport\/N Line, Hyundai Elantra Sport, Hyundai Veloster Turbo 2 and Kia Forte GT\/Forte5; choose your car under Options. Eibach PRO-KIT for the Elantra GT Sport\/N Line (Eibach lists it for the 2018-2020 Hyundai Elantra GT Hatchback 1.6L Turbo) and for the Forte GT (Eibach lists it for the 2020-2024 Kia Forte GT Sedan 1.6L Turbo FWD, for vehicles with multi-link rear suspension only).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eEibach PRO-KIT Performance Springs for the Elantra GT Sport\/N Line, Elantra Sport, Veloster Turbo 2 and Forte GT\/Forte5. Tested with OEM Shocks, the Pro-Kit gives high performance handling and aggressive good looks, with a lower center of gravity and a progressive spring design for excellent ride quality.\u003c\/p\u003e\n\u003cp\u003eEibach products are created to meet the extreme requirements of racing, from the 245-mph Mulsanne straight of Le Mans to the fender-to-fender combat of the Daytona Motor Speedway. The chassis of a production vehicle is designed to be built at a minimum cost, and suited for an \"average driver\". We enthusiasts, however, are anything but average. We know what we want from a vehicle: immediate response, reduced body roll, increased stability and enhanced cornering ability, and the look that comes with those characteristics, a lower, more muscular, more athletic stance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/eiba.jpg?v=1590803044\" alt=\"Eibach PRO-KIT lowering springs, set of 4 dark grey springs, for the Elantra GT Sport and N Line, Elantra Sport, Veloster Turbo 2 and Kia Forte GT\" loading=\"lazy\" width=\"700\" height=\"466\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe special skills of Eibach engineers are in the tuning of the individual components (springs, dampers and stabilizers) to achieve the best possible harmony between the driver, the automobile and the road. As a driver you immediately feel more direct handling and greater predictability. Nose dive under braking is reduced, as well as excessive body roll in hard cornering, and in any performance driving situation, tracking stability and driver confidence are greatly enhanced.\u003c\/p\u003e\n\u003cp\u003eEibach production technology is recognized worldwide as leading its field, from its high-strength spring-steel alloys and advanced CNC winding process to its high-quality corrosion protection and the legendary longevity of its components. The entire process, from initial development to final shipping, is subject to an extensive Quality Management System certified to the ISO 9001:2008 international quality standard, and Eibach operates to its own, often more rigid, specifications. When you see the Eibach logo on a part, you can be sure that it is of the highest possible quality.\u003c\/p\u003e\n\u003cp\u003eEibach springs have supported innumerable race and championship winners over the last two decades. In series as different as Formula 1 and NASCAR, the winning factor is often chassis setup and tuning: when everybody has comparable power, the driver who wins is the one who can put that power to the ground and maintain momentum through the corners. Eibach's partners include AMG, Audi, BMW, Ferrari, Ford, Honda, Lamborghini, Lola, MazdaSpeed, Mitsubishi, Nissan, Subaru, Porsche, Renault F-1, Toyota and many more.\u003c\/p\u003e\n\u003cp\u003eWhether in F1, NASCAR, WRC, CART or Indy Car, Eibach regards motor sports as the ideal proving ground. The experience it gains at the highest levels of racing goes directly into the development of the highest-grade chassis components on the planet, and the enthusiasm created by the challenges of motor sports drives it to ever-higher performance: performance you will enjoy every time you pull out of the pits, or your own garage.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eElantra GT Sport\/N Line: Front Lowering 1.3\", Rear Lowering 1.2\"\u003c\/li\u003e\n\u003cli\u003eForte GT: 1.4\" front, 1.3\" rear (Eibach's figures)\u003c\/li\u003e\n\u003cli\u003eTested with OEM Shocks\u003c\/li\u003e\n\u003cli\u003eHigh Performance Handling and Aggressive Good Looks\u003c\/li\u003e\n\u003cli\u003eLower Center of Gravity\u003c\/li\u003e\n\u003cli\u003eStop Quicker, Corner Faster and get Better MPG!\u003c\/li\u003e\n\u003cli\u003eProgressive Spring Design for Excellent Ride Quality\u003c\/li\u003e\n\u003cli\u003eSet of 4 springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e Elantra GT Sport\/N Line, Elantra Sport, Veloster Turbo 2, or Forte GT\/Forte5. The Elantra GT Sport\/N Line and Elantra Sport sets are on order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe springs were tested with OEM shocks. Eibach does not guarantee fitment, height or warranties on unlisted applications, and lists the Forte GT kit for vehicles with multi-link rear suspension only. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eEibach gives a 5-year limited warranty against factory defects in material and workmanship on its Pro-Kit springs. It covers the original purchaser with proof of purchase who still owns the vehicle; the springs must be installed by a qualified, licensed mechanic, and racing use, misuse and overloading are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai Elantra GT Sport\/N Line, Elantra Sport and Veloster Turbo 2, and the Kia Forte GT\/Forte5. Choose your car under Options.\u003c\/p\u003e\n\u003ch3\u003eHow much does it lower the car?\u003c\/h3\u003e\n\u003cp\u003eOn the Elantra GT Sport\/N Line, 1.3\" at the front and 1.2\" at the rear. Eibach gives 1.4\" front and 1.3\" rear for the Forte GT kit.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eWe special order every set we sell, with a 2 week shipping wait.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Elantra GT Sport\/N Line","offer_id":39519857148090,"sku":"E10-42-046-01-22","price":564.99,"currency_code":"CAD","in_stock":true},{"title":"Elantra Sport","offer_id":39519857180858,"sku":"E10-46-038-02-22","price":564.99,"currency_code":"CAD","in_stock":true},{"title":"Veloster Turbo 2","offer_id":39519857213626,"sku":"","price":564.99,"currency_code":"CAD","in_stock":true},{"title":"Forte GT\/Forte5","offer_id":39519857246394,"sku":"E10-46-038-02-22","price":564.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/eiba.jpg?v=1590803044"},{"product_id":"motul-x-cess-5w40-engine-oil","title":"X-cess Gen 2 5w40 Engine Oil","description":"\u003cp\u003e\u003cstrong\u003eItem In Stock at all times, Always on-hand.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe have Motul X-Cess Gen 2, Motul Sport, and Liqui Moly Molygen in 5w40 in stock at all times.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: engines that call for a 5W40 oil approved to BMW LL-01 (all model years, including 2019 and newer), MB 229.5\/226.5, Porsche A40 or VW 502 00 \/ 505 00. Motul 8100 X-cess gen2 5W-40 (5L jug).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eMotul 8100 X-cess 5W40 GEN2 is the updated, \"GEN2\" version of 8100 X-cess, with many benefits over the standard X-cess Gen 1. It meets the standards for the BMW LL-01 approval for all vehicles, including 2019 and newer, while retaining its existing approvals for Porsche, VW, Audi, and Mercedes Benz.\u003c\/p\u003e\n\u003cp\u003eMotul introduced it alongside 8100 X-clean 5W40 GEN2. If you think you're buying a BMW LL-04 or LL-01 approved oil for 2019 and newer cars, chances are you are using an obsolete product that lost its approval months ago and is underperforming versus oil technology available today. Thankfully, Motul has developed a next generation of 8100 X-clean dubbed \"GEN2\" that is approved for the latest BMW LL-04 approval, while also updating the product to meet new standards for approvals from Mercedes Benz, VW, Audi, and Porsche.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201106_172659.jpg?v=1604701789\" alt=\"Motul 8100 X-cess gen2 SAE 5W-40 100% synthetic motor oil, 5 litre jug, front label\" loading=\"lazy\" width=\"1080\" height=\"1340\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eWhat happened: with more stringent emissions standards and updates in technology, automotive manufacturers have shifted to smaller, forced induction engines. During the development of the latest generation of BMW engines, existing approved oils were found to be underperforming in oxidation stability, deposit control, and oil life. Motul invested heavily to retain all OEM approvals in order to be the lead in approved products and overall quality, and updated 8100 X-cess to GEN2.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8100 X-cess gen2 5W40 is OEM approved for all new 2019+ BMWs requiring LL-01 (and backward compatible to all previous cars requiring BMW LL-01)\u003c\/li\u003e\n\u003cli\u003eIncreased oil performance in high horsepower applications\u003c\/li\u003e\n\u003cli\u003eImproved viscosity stability under extreme temperatures\u003c\/li\u003e\n\u003cli\u003eIncreased turbocharger cleanliness and protection\u003c\/li\u003e\n\u003cli\u003eLow pour point for better cold start performance\u003c\/li\u003e\n\u003cli\u003eBetter additive retention contributing to engine protection\u003c\/li\u003e\n\u003cli\u003eLonger oil life\u003c\/li\u003e\n\u003cli\u003eApprovals: BMW LL-01 (all model years), MB 229.5\/226.5, Porsche A40, VW 502 00 \/ 505 00\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201106_172716.jpg?v=1604701794\" alt=\"Back of the Motul 8100 X-cess gen2 5W-40 5 litre jug\" loading=\"lazy\" width=\"986\" height=\"1387\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Case of 3 x 5L Jug, or 1 x 5L Jug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eUse it where your vehicle calls for one of the approvals above. Can your car still use the first generation product? For 8100 X-cess 5W40, the \"first generation\" will eventually be phased out of the market as it does not meet the latest (2019+) BMW LL-01 standard, but it can still be used for all pre-2019 BMW LL-01, Porsche A40, VW 502 00 \/ 505 00, and Mercedes Benz models requiring 229.5\/226.5\/229.3.\u003c\/p\u003e\n\u003cp\u003eFor 8100 X-clean 5W40, the \"first generation\" will remain to cover older manufacturer specifications, such as BMW LL-04 cars prior to 2019, Porsche A40, and VW 502 00 \/ 505 00 \/ 505 01.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/d23zpyj32c5wn3.cloudfront.net\/images\/masonry_bricks\/pictures\/59045\/big\/motul_109761-8100_clean_gen2_5w-40_1l_white.jpg?1588619084\" alt=\"Motul 8100 X-cess gen2 SAE 5W-40 1 litre bottle, front label listing BMW LL-01, MB-Approval 229.5\/226.5, Porsche A40 and VW 502 00\/505 00\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs GEN2 approved for 2019 and newer BMWs?\u003c\/h3\u003e\n\u003cp\u003eYes. 8100 X-cess gen2 5W40 is OEM approved for all new 2019+ BMWs requiring LL-01, and backward compatible to all previous cars requiring BMW LL-01.\u003c\/p\u003e\n\u003ch3\u003eCan my car still use the first generation X-cess?\u003c\/h3\u003e\n\u003cp\u003eYes, if it is a pre-2019 BMW LL-01, Porsche A40, VW 502 00 \/ 505 00, or Mercedes Benz model requiring 229.5\/226.5\/229.3. The first generation does not meet the latest (2019+) BMW LL-01 standard and will eventually be phased out.\u003c\/p\u003e\n\u003ch3\u003eWhich approvals does it carry?\u003c\/h3\u003e\n\u003cp\u003eBMW LL-01 (all model years), MB 229.5\/226.5, Porsche A40, VW 502 00 \/ 505 00.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes. It is in stock at all times, always on hand.\u003c\/p\u003e","brand":"Motul","offers":[{"title":"Case of 3 x 5L Jug","offer_id":31542862905367,"sku":"MO110905","price":275.99,"currency_code":"CAD","in_stock":true},{"title":"1 x 5L Jug","offer_id":31562692919319,"sku":"MO109776","price":100.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201106_172659.jpg?v=1604701789"},{"product_id":"ngk-1422-engine-spark-plugs","title":"Spark Plugs Set of 4 (HKS Replacement)","description":"\u003cp\u003e\u003cstrong\u003eAlways in stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAs good as HKS Spark Plugs IF NOT BETTER!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRICE IS FOR SET OF 4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e A replacement for the HKS 8 heat range plug and a great OEM replacement plug. NGK Laser Iridium, set of 4: 12 mm thread, 26.5 mm reach, 5\/8 in. hex, gasket seat.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA set of 4 NGK Laser Iridium spark plugs that we sell in place of the HKS plug. They are a great OEM replacement. Some people run these plugs with tunes, and they are very good replacement plugs if not tuned; at N75 Motorsports we do not recommend these for a tune, but we see the HKS plug as a waste of money: these are basically the same plug at less than half the cost.\u003c\/p\u003e\n\u003cp\u003eN75 Motorsports will NOT sell the HKS plug, because this product is as good for less than half the cost. We do not feel it is fair for the customer to be \"fooled\" by brand names. We used to sell and stock the HKS 9 heat range version, as they are the cheapest available 9 heat range plug; however, the HKS plug we replace is 8 heat range, the same as these. We do not believe it is fair for a customer to spend over double for basically the exact same plug, if not a worse one. NGK plugs have been the standard in the automotive industry for the last 25 years+: from ultra high performance exotic cars, to daily drivers, to fleet vehicles, you will find NGK from factory.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk.jpg?v=1590890704\" alt=\"NGK Laser Iridium spark plug, white insulator marked NGK IR with a plated steel shell\" loading=\"lazy\" width=\"400\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eNGK Laser Iridium spark plugs are the latest OE spark plug design. They feature a laser welded .8 mm iridium center electrode along with laser welded platinum on the ground electrode, providing the strongest ignitability and the longest life possible. This plug has a 12 mm thread, a 26.5 mm reach, a 5\/8 in. hex and a gasket seat.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNGK Laser Iridium: the latest OE spark plug design\u003c\/li\u003e\n\u003cli\u003eLaser welded .8 mm iridium center electrode\u003c\/li\u003e\n\u003cli\u003eLaser welded platinum on the ground electrode\u003c\/li\u003e\n\u003cli\u003eStrongest ignitability and the longest life possible\u003c\/li\u003e\n\u003cli\u003e8 heat range, the same as the HKS plug\u003c\/li\u003e\n\u003cli\u003eSpark Plug Hex Size: 5\/8 in.\u003c\/li\u003e\n\u003cli\u003eSpark Plug Reach: 26.5 mm\u003c\/li\u003e\n\u003cli\u003eSpark Plug Seat Type: Gasket\u003c\/li\u003e\n\u003cli\u003eSpark Plug Thread Size: 12 mm\u003c\/li\u003e\n\u003cli\u003eUNSPSC: 26101732\u003c\/li\u003e\n\u003cli\u003eSet of 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk1.jpg?v=1590890704\" alt=\"Close-up of the NGK Laser Iridium firing end: fine-wire center electrode, ground electrode and threads\" loading=\"lazy\" width=\"400\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eFREE GAPPING SERVICE: let us know what gap you want in the comments when ordering and we will gap them for you. If no spec is asked for, they will be gapped to .025, as we have had no issues with this gap on stock cars or stuffed turbo cars.\u003c\/p\u003e\n\u003cp\u003eThese are a great OEM replacement; at N75 Motorsports we do not recommend these for a tune. We recommend installation by a qualified technician. Contact us before ordering if you are not sure these plugs suit your engine.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eNGK warrants its spark plugs against defects in workmanship or materials for 60 days from the date of purchase, for the original purchaser; racing use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow do these compare with the HKS plug?\u003c\/h3\u003e\n\u003cp\u003eThe HKS plug is 8 heat range, the same as these. We see these as basically the same plug at less than half the cost, as good as the HKS plug if not better.\u003c\/p\u003e\n\u003ch3\u003eCan I use them with a tune?\u003c\/h3\u003e\n\u003cp\u003eSome people run these plugs with tunes, but at N75 Motorsports we do not recommend these for a tune. They are very good replacement plugs if not tuned.\u003c\/p\u003e\n\u003ch3\u003eWill you gap them for me?\u003c\/h3\u003e\n\u003cp\u003eYes, for free. Tell us the gap you want in the order comments; if no spec is asked for, we gap them to .025.\u003c\/p\u003e\n\u003ch3\u003eIs the price for one plug?\u003c\/h3\u003e\n\u003cp\u003eNo. The price is for a set of 4.\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":31544255250455,"sku":"1422","price":129.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ngk.jpg?v=1590890704"},{"product_id":"wix-xp-engine-oil-filter-51334xp","title":"WIX XP Engine Oil filter","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT (GT Sport \/ N Line) 1.6T, Hyundai Elantra Sport 1.6T, Hyundai Veloster 1.6T including the Veloster Turbo 2, Hyundai Tucson 1.6T, and Kia 1.6T Gamma models such as the Forte GT. Confirm the filter matches your engine before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe WIX XP is an OE-design aftermarket spin-on engine oil filter. WIX XP filters are considered an aftermarket standard. This is the filter we fit on the 1.6T Gamma platform, and the same filter is included in our \u003ca href=\"https:\/\/n75motorsports.ca\/products\/oil-change-kit\"\u003eOil Change Kit in a Box\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe OEM Hyundai filter is a good filter, but we fit the WIX XP because we believe it is the better filter for this platform.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wix_3b9309c8-6923-4a62-9e77-903eae6a1c90.jpg?v=1591050882\" alt=\"WIX XP black spin-on engine oil filter\" loading=\"lazy\" width=\"1261\" height=\"1500\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eIt is made to OEM spec, which means it has an anti-drain-back valve, so the engine does not lose oil pressure on cold start. It is made to OE design, meets OEM spec per SKU, and is designed to outperform and outlast OE-style filters.\u003c\/p\u003e\n\u003cp\u003eTo compare it with the OEM filter, we weighed both filters and cut them apart. The WIX XP is a much thicker and significantly heavier filter, which is why we consider it the tougher-built of the two.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: OE-replacement, spin-on lube filter\u003c\/li\u003e\n\u003cli\u003eClass: A\u003c\/li\u003e\n\u003cli\u003eDuty type: LD\u003c\/li\u003e\n\u003cli\u003eMedia: Enhanced cellulose\u003c\/li\u003e\n\u003cli\u003eFiltration: 19 micron\u003c\/li\u003e\n\u003cli\u003eBeta ratio: 2\/20 – 6\/20\u003c\/li\u003e\n\u003cli\u003eBurst pressure: 280 PSI\u003c\/li\u003e\n\u003cli\u003eBy-pass valve setting: 8–11\u003c\/li\u003e\n\u003cli\u003eFlow rate: 9–11 GPM\u003c\/li\u003e\n\u003cli\u003eAnti-drain-back valve: Yes (prevents oil-pressure loss on cold start)\u003c\/li\u003e\n\u003cli\u003eHeight: 3.24 in\u003c\/li\u003e\n\u003cli\u003eOuter diameter (top): 3.15 in\u003c\/li\u003e\n\u003cli\u003eInner diameter (top): Closed\u003c\/li\u003e\n\u003cli\u003eThread size: 20 x 1.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThis is a spin-on filter with a 20 x 1.5 mm thread. Confirm the filter matches your engine before ordering. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my car?\u003c\/h3\u003e\n\u003cp\u003eThis is the oil filter we fit on the 1.6T Gamma cars: Elantra GT, Elantra Sport, Veloster, Tucson and Kia 1.6T Gamma models such as the Forte GT. Confirm it matches your engine before ordering. It is also the filter included in our \u003ca href=\"https:\/\/n75motorsports.ca\/products\/oil-change-kit\"\u003eOil Change Kit in a Box\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDoes it have an anti-drain-back valve?\u003c\/h3\u003e\n\u003cp\u003eYes. It is made to OEM spec, so oil pressure is not lost on cold start.\u003c\/p\u003e\n\u003ch3\u003eWhy do you fit the WIX XP instead of the OEM filter?\u003c\/h3\u003e\n\u003cp\u003eThe OEM Hyundai filter is a good filter, but we believe the WIX XP is the better filter for this platform. We weighed both filters and cut them apart: the WIX XP is a much thicker and significantly heavier filter.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"Default Title","offer_id":31550293114903,"sku":"51334XP","price":17.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wix_3b9309c8-6923-4a62-9e77-903eae6a1c90.jpg?v=1591050882"},{"product_id":"afe-intake-takeda-momentum-pro-dry-s-cold-air-intake-systems-56-10005d","title":"Takeda Pro Cold Air Intake Systems  Elantra GT N Line ES VT2 Forte GT","description":"\u003cp\u003e\u003cstrong\u003eIn Stock: Dry filter and Wet filter versions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNewly updated hood seal now seals 100%.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 2017-2020 Hyundai Elantra Sport, 2018 Hyundai Elantra GT Sport, 2019-2020 Hyundai Elantra GT N Line, 2019-2021 Hyundai Veloster Turbo 2 and 2020-UP Kia Forte GT.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe aFe Takeda Pro cold air intake is the most popular intake for our platform. This Stage-2 design takes advantage of the Elantra Sport\/N Line's factory air inlet and uses an open-element housing, which delivers a significant increase in airflow and the highly sought-after turbo spool sound. aFe rates it at up to +14 HP and +13 lb-ft of torque on the dyno.\u003c\/p\u003e\n\u003cp\u003eIt can be installed without the airbox as an SRI (short ram intake), or with the airbox for the closed loop system. That is one reason we recommend these intakes. Secondly, the tube is plastic, so it does not absorb heat. Lastly, the full cover uses the biggest box possible for maximum airflow.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/afe-56-10005d_ec_xl.jpg?v=1626582275\" alt=\"aFe Takeda Pro cold air intake for the Elantra Sport, Elantra GT and Forte GT, showing the black intake tube and filter housing\" loading=\"lazy\" width=\"1600\" height=\"1200\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe air filter is surrounded by a one-piece, open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows easy viewing of the air filter and delivers an aggressive intake sound, and a built-in ram air scoop captures additional cool air from behind the front grille.\u003c\/p\u003e\n\u003cp\u003eThe intake tube is CAD-designed and dyno-tuned to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable, and it features a Takeda design inspired by import vehicles. In aFe's words, aFe Takeda Dry S cold air intake systems provide extreme performance without compromising style.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDyno-proven gains up to +14 HP and +13 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eOutflows the factory intake by 60%; measured flow 445 CFM @ 7\" H2O\u003c\/li\u003e\n\u003cli\u003eOpen-element design showcases the air filter and delivers an aggressive air intake sound\u003c\/li\u003e\n\u003cli\u003eBuilt-in ram air scoop captures additional cool air from the front grille\u003c\/li\u003e\n\u003cli\u003eOne-piece XLPE housing and dyno-tuned XLPE intake tube; the plastic tube does not absorb heat\u003c\/li\u003e\n\u003cli\u003eWashable and reusable Pro 5R air filter for life-long performance\u003c\/li\u003e\n\u003cli\u003ePro 5R large five-layer performance air filter: 7-1\/2\" tall, pre-oiled, 360-degree radial flow, with five layers of progressively finer cotton gauze media. aFe says it provides the largest amount of high-flowing air and usually results in the highest power gains of all its filter media options, and it is perfect for street and\/or track use. Its inverted top makes for more filter surface area, resulting in more flow and longer service intervals.\u003c\/li\u003e\n\u003cli\u003eRuns without the airbox as an SRI or with the airbox as a closed loop system\u003c\/li\u003e\n\u003cli\u003eNewly updated hood seal now seals 100%\u003c\/li\u003e\n\u003cli\u003eUtilizes factory mounting locations for a fast and easy installation (roughly 20 minutes)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/afe-56-10005d_in_xl.jpg?v=1626582275\" alt=\"aFe Takeda Pro cold air intake installed in the engine bay\" loading=\"lazy\" width=\"1500\" height=\"1125\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e Dry or Wet. Dry has the Pro Dry S oil-free synthetic filter media. Wet has the pre-oiled Pro 5R cotton gauze filter described above. DRY FILTER IN STOCK. WET FILTER IN STOCK.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe system is CAD-designed and utilizes factory mounting locations, making for a hassle-free, direct bolt-on installation that requires no cutting or drilling on OEM parts (roughly 20 minutes). Its patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system, and an included billet aluminum fitting allows the OE connections to transfer over seamlessly.\u003c\/p\u003e\n\u003cp\u003eFor the Elantra GT Sport and N Line we highly recommend the aFe DAS Ram Air Scoop with this intake to increase airflow to the engine; the OEM air scoop is a very badly designed part. On any other car we highly recommend Velossa Tech.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/56-10005r_6.1595521440.jpg?v=1626582275\" alt=\"aFe Takeda Pro intake kit contents laid out, Wet filter version\" loading=\"lazy\" width=\"1600\" height=\"1200\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eCovered by the manufacturer's warranty from aFe. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003e2017-2020 Hyundai Elantra Sport, 2018 Elantra GT Sport, 2019-2020 Elantra GT N Line, 2019-2021 Veloster Turbo 2 and 2020-UP Kia Forte GT.\u003c\/p\u003e\n\u003ch3\u003eDry or Wet filter: which should I choose?\u003c\/h3\u003e\n\u003cp\u003eBoth are in stock. The Wet version uses the pre-oiled Pro 5R cotton gauze filter, which aFe says usually gives the highest power gains of its filter media options. The Dry version uses the oil-free Pro Dry S synthetic media.\u003c\/p\u003e\n\u003ch3\u003eDo I have to keep the airbox?\u003c\/h3\u003e\n\u003cp\u003eNo. It can be installed without the airbox as an SRI, or with it for the closed loop system.\u003c\/p\u003e\n\u003ch3\u003eIs there anything you recommend adding?\u003c\/h3\u003e\n\u003cp\u003eOn the Elantra GT Sport and N Line, the aFe DAS Ram Air Scoop, to increase airflow to the engine. On other cars, Velossa Tech.\u003c\/p\u003e","brand":"aFe Power","offers":[{"title":"Dry","offer_id":37694765465786,"sku":"56-10005D","price":530.99,"currency_code":"CAD","in_stock":true},{"title":"Wet","offer_id":37694765498554,"sku":"56-10005R","price":530.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/afe-56-10005d_ec_xl.jpg?v=1626582275"},{"product_id":"whiteline-kdt970-lower-engine-bushing","title":"Whiteline Heavy Duty Lower Engine Bushing","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e All \"N\" models and almost every Hyundai: Veloster N, N Line, ES, Elantra N, Kona N, Elantra N Line, Kona N Line, Veloster Turbo 1\/2 NAV and Elantra. Also fits the Kia Forte GT, Kia Forte5 and other Kia models.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline's heavy duty lower engine bushing replaces the soft factory rubber in the torque arm mount. It is one of the best upgrades for your dollar on KDM vehicles, and very similar to Powerflex Race at a far better price. Dollar for dollar, it is one of the best mods available for our vehicles, in our opinion.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_1.jpg?v=1595968822\" alt=\"Whiteline heavy duty lower engine bushings, pair\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The factory torque arm is inherently soft due to its high compliance rubber bushing design, and it was built for comfort, not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology, it eliminates the slop, twisting and shudder found in the OEM rubber bushings, allowing for a faster, positive, responsive feel of power delivery on and off the throttle.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLow compliance bushing technology\u003c\/li\u003e\n\u003cli\u003eLimits engine and drivetrain movement on the pitch stop\u003c\/li\u003e\n\u003cli\u003eEliminates the slop, twisting and shudder of the OEM rubber bushings\u003c\/li\u003e\n\u003cli\u003eFaster, positive, responsive feel of power delivery on and off the throttle\u003c\/li\u003e\n\u003cli\u003eBuilt for high torque and power output engines\u003c\/li\u003e\n\u003cli\u003eKits Required: 1\u003c\/li\u003e\n\u003cli\u003eKit Contents: 2 Bushings, Install Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_2.jpg?v=1595968822\" alt=\"Whiteline lower engine bushing, side angle\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eOne kit is required per car; it contains 2 bushings and an install guide. Install Guide: \u003ca href=\"https:\/\/imageapi.partsdb.com.au\/api\/Image?urlId=mG7Hd8eoI24XYEOFCFNrTqwFIE6xW7hv8NEfQhU6l26SM5oZlDDM8t5x65rEve6q\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDownload Here\u003c\/a\u003e. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image.jpg?v=1595968822\" alt=\"Whiteline lower engine bushings, top view\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWarranty: 3 Year\/ 60,000Km's from Whiteline. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eAll \"N\" models and almost every Hyundai, including the Veloster N, N Line, ES, Elantra N, Kona N, Elantra N Line, Kona N Line, Veloster Turbo 1\/2 NAV and Elantra, plus the Kia Forte GT, Kia Forte5 and other Kia models.\u003c\/p\u003e\n\u003ch3\u003eHow does it compare with Powerflex?\u003c\/h3\u003e\n\u003cp\u003eIt is very similar to Powerflex Race at a far better price.\u003c\/p\u003e\n\u003ch3\u003eHow many do I need?\u003c\/h3\u003e\n\u003cp\u003eOne kit. It contains 2 bushings and the install guide.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":40386298609850,"sku":"KDT970M-1","price":49.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_1.jpg?v=1595968822"},{"product_id":"whiteline-solid-racing-lower-engine-mount","title":"Solid Racing Lower Engine Mount","description":"\u003cp\u003e\u003cstrong\u003eON ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant notes: performance alloy arm, X heavy duty. It induces NVH (noise, vibration and harshness).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai i30\/i30N and Hyundai Elantra, 2016-on, per Whiteline's install guide; Whiteline lists this mount for Hyundai and Kia. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline's complete solid lower engine mount: a billet aluminium torque arm (engine pitch-stop mount) with its own mount, which replaces the factory mount. Whiteline lists it as the Rear Lower Engine Mount to Suit Hyundai and Kia. It is built for high torque and high power output engines and gives a faster, positive, responsive feel of power delivery on and off the throttle.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_3.jpg?v=1595969022\" alt=\"Whiteline billet aluminium engine torque arm with mount bracket, bolts, washers and nut\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The factory torque arm is inherently soft due to its high compliance rubber bushing design and was built for comfort, not responsiveness or feel. Whiteline's billet aluminium torque arm is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology, it eliminates the slop, twisting and shudder found in the OEM rubber bushings, allowing for a faster, positive, responsive feel of power delivery on and off the throttle.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete billet aluminium torque arm and mount; performance alloy arm, X heavy duty\u003c\/li\u003e\n\u003cli\u003eLow compliance bushing technology\u003c\/li\u003e\n\u003cli\u003eLimits engine and drivetrain movement on the pitch stop\u003c\/li\u003e\n\u003cli\u003eEliminates the slop, twisting and shudder of the OEM rubber bushings\u003c\/li\u003e\n\u003cli\u003eInduces NVH\u003c\/li\u003e\n\u003cli\u003eKits Required: 1\u003c\/li\u003e\n\u003cli\u003eKit Contents: 1 Torque Arm, 1 Mount, 3 Bolts, 4 Washers, 1 Nut, Install Guide, Grease\u003c\/li\u003e\n\u003cli\u003eHardware, per Whiteline's install guide: 2x M10x1.5x25mm bolts, 2x M10 washers, 1x M14x1.5x80mm bolt, 1x M14x1.5 Nyloc nut, 2x M14 washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_4.jpg?v=1595969022\" alt=\"Whiteline torque arm and mount bracket seen from the other side, with the bolts, washers and nut\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eInstall Guide: \u003ca href=\"https:\/\/imageapi.partsdb.com.au\/api\/Image?urlId=mG7Hd8eoI24XYEOFCFNrTj4Upn05g6zOpQD%2BrXZdSEIweqOfxy7hjPXkQ91qHL0X\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDownload Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWhiteline's guide calls this a relatively easy job: there is no need to support the engine, you simply unbolt the OE mount (the front M12 bolt and two rear M10 bolts) and keep the front M12 bolt for re-use. Lightly grease the bushing side faces with the supplied grease, then bolt up the new mount with the supplied hardware; you may have to rock the engine to start the bolts. Tighten the M10 bolts to 40Nm, the OE M12 bolt to 60Nm and the M14 bolt to 70Nm, road test, and re-check the bolts after 100 km. Whiteline lists the installation time as 0.5 hour, with no wheel alignment required. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_5.jpg?v=1595969022\" alt=\"Whiteline lower engine mount kit laid out: torque arm, mount bracket, 3 bolts, 4 washers and a nyloc nut\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWarranty: 3 Year\/ 60,000Km's from Whiteline. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill it add vibration?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a performance alloy arm, X heavy duty, and it induces NVH.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the kit?\u003c\/h3\u003e\n\u003cp\u003e1 torque arm, 1 mount, 3 bolts, 4 washers, 1 nut, the install guide and grease.\u003c\/p\u003e\n\u003ch3\u003eIs it hard to install?\u003c\/h3\u003e\n\u003cp\u003eWhiteline calls it a relatively easy job: the engine does not need to be supported, and the OE mount simply unbolts. Whiteline lists the installation time as 0.5 hour.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31677166190615,"sku":"KDT973","price":392.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_3.jpg?v=1595969022"},{"product_id":"whiteline-lowering-springs-wsk-hyu001","title":"Performance Lowering Springs","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK: SHIPS WITHIN 24 HOURS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra Sport, Hyundai Elantra GT Sport, Hyundai Elantra GT N Line, Hyundai Veloster Turbo 2, Hyundai Veloster N, Hyundai Kona, Kia Forte GT and Kia Forte5. May fit other fully independent suspension KDM vehicles. Whiteline lists these springs for the Hyundai Elantra SR and Veloster N 2017+ on its US site and for the Hyundai i30 N, Kona and Veloster on its Australian site.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline performance lowering springs. Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. By lowering the vehicle's centre of gravity, the unique and progressive rate coil design not only improves performance but enhances overall appearance.\u003c\/p\u003e\n\u003cp\u003eWe recommend these lowering springs over Eibach due to Eibach's very moderate drop. These springs have a more aggressive drop than Eibach, and give you a lower looking vehicle. Add in other Whiteline suspension components and your car will be quickly ready for the track! #gripactivated\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/WSK-HYU001_1024x1024_2x_7b9abf75-1821-4dc3-b6e3-aa0b5d1ecec8.jpg?v=1595970027\" alt=\"Set of four Whiteline performance lowering springs, front and rear\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe front springs provide a 25mm drop and the rears deliver a desirable 25mm to the vehicle. Whiteline rates the springs at 3.6 kg\/mm (202 lb\/in) front and 4.0 kg\/mm (225 lb\/in) rear. They are developed and manufactured in Europe from the highest quality materials and coating, to the finest tolerances, guaranteeing exact fitment, and are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation, match them with a Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e25mm drop front and rear\u003c\/li\u003e\n\u003cli\u003eSpring rates (Whiteline): 3.6 kg\/mm (202 lb\/in) front, 4.0 kg\/mm (225 lb\/in) rear\u003c\/li\u003e\n\u003cli\u003eUnique, progressive rate coil design\u003c\/li\u003e\n\u003cli\u003eMore aggressive drop than Eibach, for a lower looking vehicle\u003c\/li\u003e\n\u003cli\u003eDeveloped and manufactured in Europe from the highest quality materials and coating\u003c\/li\u003e\n\u003cli\u003eMade to the finest tolerances, guaranteeing exact fitment\u003c\/li\u003e\n\u003cli\u003eEngineered for optimal balance with OEM and aftermarket shocks\u003c\/li\u003e\n\u003cli\u003eSet of 4 springs (Whiteline)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/WSK-HYU001-2_1024x1024_2x_6be04f45-777f-4f57-b0b6-42476ae8d63f.jpg?v=1595970028\" alt=\"Whiteline lowering springs, front and rear pairs\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Whiteline Performance Correction Ball Joints:\u003c\/strong\u003e No, Yes (1.6T Chassis 4 Gold Rings) or Yes (2.0T Chassis 3 Gold Rings). No is the springs only. The two Yes options add Whiteline performance correction ball joints, for the 1.6T chassis or the 2.0T chassis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWe at N75 Motorsports highly recommend Whiteline lower ball joints with any lowered vehicle, for the following reason.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is roll centre, and how does ride height affect it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhiteline's motto is \"Activate More Grip\", and its philosophy is to achieve the maximum amount of usable grip on offer. There are many ways to increase the overall grip available on your car; here the focus is on how to avoid a classic mistake with MacPherson strut suspension and low ride height that can often result in loss of grip.\u003c\/p\u003e\n\u003cp\u003eMany cars in the tuning world run coilover suspension, for example the Whiteline Max-G coilovers, for the benefits they give such as adjustable ride height and damping. Whilst it's very satisfying buying tuning parts such as \u003ca href=\"https:\/\/www.whiteline.com.au\/vehicle_swaybars.php\"\u003eanti-roll bars\u003c\/a\u003e or \u003ca href=\"https:\/\/www.whiteline.com.au\/vehicle_alignment.php\"\u003eanti-lift kits\u003c\/a\u003e, sometimes the best result can come from a simple setup change. General wisdom suggests that once you've fitted your coilovers you'll be setting the ride height at a low level to reduce the centre of gravity. Reducing the centre of gravity will theoretically increase the maximum cornering speed of the vehicle, however this is not always the case. And in the case of lowering springs, most performance lowering spring kits that are well developed will take into account a number of factors, one of which is the roll centre location, another of course being ideal spring rate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSo what is important about roll centre and ride height?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe roll centre is a virtual point at which the chassis interacts with the centre of gravity to create weight transfer and roll. This is particularly important with MacPherson strut suspension, because MacPherson strut suspension doesn't have an upper arm; the geometrical equivalent of the upper arm is the top mount. This means the typical roll centre location of a well-designed MacPherson strut suspension is just above ground level. The majority of chassis engineers will seek a roll centre fairly low to ground level, but slightly above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"The problem occurs when you lower the MacPherson strut suspension too far.\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a double A-arm or double wishbone suspension, where unequal length arms are used, a chassis designer is able to engineer favourable geometry and camber change throughout the functional range of the suspension travel. Unfortunately, on MacPherson strut suspension the engineer doesn't have this luxury, and the camber change and roll centre change on a MacPherson strut at very high lateral loads can often result in the loss of grip. So what does this have to do with the ride height?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"Eventually the car will 'fall over' onto the outside front wheel.\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs you lower your coilover equipped car with MacPherson suspension, the lower control arm will eventually start to point upwards at the outboard end, referencing ground level. What this does in reality is drop the roll centre below ground. The impact this has dynamically, though, is far greater than a static drawing would show.\u003c\/p\u003e\n\u003cp\u003eWith the roll centre below ground height, more weight is transferred via the springs (likewise, raising the roll centre reduces weight transfer through the springs and increases weight transfer through sprung mass). This makes body roll more pronounced and in turn increases the leverage against the lower roll centre, making the instantaneous centre move well outside the vehicle, causing even more weight transfer and roll. Eventually the car will \"fall over\" onto the outside front wheel. The tires' limits of grip will now have been breached, and no more weight transfer can occur. To the driver this is a very frustrating feeling: quite often on a front wheel drive car the rear inside wheel will now be airborne, and the car just understeers relentlessly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"One solution is to ensure that the strut works in a fairly defined range.\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are numerous ways to address this problem, but here are some common fixes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea) Keep the lowering to an optimal level to ensure the ball joint pivot point is not above the centreline from the inboard mounting point.\u003c\/li\u003e\n\u003cli\u003eb) If you are building a race car, you can move the inboard mounting points upwards or fabricate a ball joint extender.\u003c\/li\u003e\n\u003cli\u003ec) Use lowering springs instead of coilovers, where the optimal lowering range is achieved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/WSK-HYU001-3_1024x1024_2x_1f8b6d35-66db-4a0e-bd74-8d93eeba8a7d.jpg?v=1595970028\" alt=\"Whiteline front and rear lowering springs laid out\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWhiteline covers its springs and ball joints for 3 years or 60,000 km (36,000 miles), whichever comes first, against manufacturing defects in material and workmanship, for the original vehicle they are installed on. Damage from competition, motorsport or off-road use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much lower will my car sit?\u003c\/h3\u003e\n\u003cp\u003eThe front springs provide a 25mm drop and the rears a desirable 25mm.\u003c\/p\u003e\n\u003ch3\u003eHow do they compare with Eibach?\u003c\/h3\u003e\n\u003cp\u003eWe recommend these over Eibach due to Eibach's very moderate drop. These springs have a more aggressive drop than Eibach and give you a lower looking vehicle.\u003c\/p\u003e\n\u003ch3\u003eDo I need the ball joints?\u003c\/h3\u003e\n\u003cp\u003eWe at N75 Motorsports highly recommend Whiteline lower ball joints with any lowered vehicle: lowering a MacPherson strut car too far drops the roll centre below ground, which can cost grip and cause relentless understeer. The two Yes options add Whiteline performance correction ball joints.\u003c\/p\u003e\n\u003ch3\u003eHow fast does it ship?\u003c\/h3\u003e\n\u003cp\u003eIt is in stock and ships within 24 hours.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"No","offer_id":41648026452154,"sku":"WSK-HYU001","price":435.99,"currency_code":"CAD","in_stock":true},{"title":"Yes (1.6T Chassis 4 Gold Rings)","offer_id":41648026484922,"sku":"WSK-HYU002","price":659.99,"currency_code":"CAD","in_stock":true},{"title":"Yes (2.0T Chassis 3 Gold Rings)","offer_id":41648026517690,"sku":"WSK-HYU003","price":620.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/WSK-HYU001_1024x1024_2x_7b9abf75-1821-4dc3-b6e3-aa0b5d1ecec8.jpg?v=1595970027"},{"product_id":"stoptech-slotted-brake-rotor","title":"KIA Stinger GT Blank Brake Front Rotor High Carbon Alloy","description":"\u003cdiv class=\"a-row\"\u003e\n\u003cdiv class=\"a-column a-span6\"\u003e\n\u003ch1 class=\"a-size-medium a-spacing-small\"\u003eON ORDER\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eKia Stinger GT with Brembo brakes 350mm\u003c\/p\u003e\n\u003ch1 class=\"a-size-medium a-spacing-small\"\u003e\u003cbr\u003e\u003c\/h1\u003e\n\u003cdiv class=\"mb-4\"\u003eCentric premium rotors utilize an Electrocoating finish that provides long lasting corrosion protection. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. Phosphate finishes utilized by other manufacturers provide only minimal protection from the elements; these finishes are generally only effective for the shipping and storage portion of a rotor’s life. The addition of heat and moisture eliminates the effectiveness of phosphate finishes resulting in immediate corrosion once installed in the vehicle.\u003c\/div\u003e\n\u003cdiv\u003eShopping for brake rotors that are an upgrade over stock brakes that don't rust? These 120 version Centric Premium Brake Rotors are Black E-coated and double-disc ground to ensure parallelism, balance and quieter operation. Correct friction surface preparation during manufacturing promotes pad and rotor bed-in increasing stopping power and reliability. A well-priced favorite upgrade for better than OE look and reliability. Priced each.\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuantity: 1 brake rotor per pack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Centric \/ StopTech","offers":[{"title":"Pair","offer_id":31684545839127,"sku":"120.50042","price":599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/centric-premium-brake-rotors-high-quality-coated-oe-replacement-4.jpg?v=1606430664"},{"product_id":"whiteline-rear-suspension-sway-bar-link","title":"Rear Performance Sway Bar Link (Adjustable)","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear sway bar links are a must with aftermarket sway bars: we have personally seen the OEM links break in two with an aftermarket sway bar, so upgraded links are required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT Sport, Hyundai Elantra GT N Line, Hyundai Elantra Sport, Hyundai Veloster Turbo 2, Kia Forte GT, Kia Forte5 and Kona N (rear).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline's rear heavy duty adjustable anti-roll bar drop links (type: Link Kit Sway Bar (Rear)), sold as a pair. With an aftermarket sway bar, upgraded links are required. On an OEM sway bar these help increase rigidity of the OEM sway bar. This is one of the most common suspension upgrades on our platform.\u003c\/p\u003e\n\u003cp\u003e#Project22\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KLC221.jpg?v=1596493871\" alt=\"Whiteline rear adjustable sway bar links, pair, with four gold spacers and four washers\" loading=\"lazy\" width=\"804\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eNot many enthusiasts are aware that OE and, more importantly, aftermarket anti-roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable anti-roll bar links are engineered to be up to the task, with top spec, light weight componentry combined with a window of adjustability. That eliminates anti-roll bar preload on installation and, most importantly, ensures the maximum output of the anti-roll bar for improved grip and better handling.\u003c\/p\u003e\n\u003cp\u003eWhiteline lists it as a ball\/bushing link with 10mm of adjustment (65mm-75mm overall length) and a 12mm bolt diameter.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear heavy duty adjustable anti-roll bar drop links\u003c\/li\u003e\n\u003cli\u003eType: Link Kit Sway Bar (Rear)\u003c\/li\u003e\n\u003cli\u003eAdjustable length eliminates anti-roll bar preload on installation\u003c\/li\u003e\n\u003cli\u003eTop spec, light weight componentry\u003c\/li\u003e\n\u003cli\u003eBall\/bushing link: 10mm of adjustment, 65mm-75mm overall length, 12mm bolt diameter\u003c\/li\u003e\n\u003cli\u003eKit contents: 2 links, 4 spacers, 4 washers; 1 kit required\u003c\/li\u003e\n\u003cli\u003eIncreases rigidity on an OEM sway bar; required with an aftermarket sway bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe links replace the factory rear drop links, and their adjustable length lets you eliminate anti-roll bar preload on installation. Whiteline lists the installation time as 1 hour, with no wheel alignment required. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWhiteline warrants its sway bar links for 3 years or 60,000 km (36,000 miles), whichever comes first, on the original vehicle they are installed on. Competition, motorsport or off-road use, normal wear, incorrect installation and labour are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDo I need these with an aftermarket sway bar?\u003c\/h3\u003e\n\u003cp\u003eYes. We have personally seen the OEM links break in two with an aftermarket sway bar, so upgraded links are required.\u003c\/p\u003e\n\u003ch3\u003eDo they help with the factory sway bar?\u003c\/h3\u003e\n\u003cp\u003eYes. On an OEM sway bar they help increase rigidity of the OEM sway bar.\u003c\/p\u003e\n\u003ch3\u003eWhich cars do they fit?\u003c\/h3\u003e\n\u003cp\u003eHyundai Elantra GT Sport, Elantra GT N Line, Elantra Sport, Veloster Turbo 2, Kia Forte GT, Kia Forte5 and Kona N.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the kit?\u003c\/h3\u003e\n\u003cp\u003e2 links, 4 spacers and 4 washers.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31684560683031,"sku":"KLC221","price":245.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KLC221.jpg?v=1596493871"},{"product_id":"whiteline-suspension-control-arm-bushings-kca474","title":"Whiteline Front Control Arm Bushings","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT Sport, Hyundai Elantra GT N Line, Hyundai Elantra Sport, Hyundai Veloster Turbo 2, Kia Forte GT, Kia Forte5, Veloster N, Kona N and Elantra N. All confirmed fitment.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline's front anti lift bushing kit for the front lower control arms. Hard acceleration and braking allow the lower control arms to move around significantly, causing axle tramp, poor launch and poor power delivery. Due to the dynamic nature of these lower control arm bushings, this also alters the bump steer characteristics, effectively generating significant 'toe in' under hard braking.\u003c\/p\u003e\n\u003cp\u003eReplacing the rear caster bushing with a low compliance bushing alters the dynamic effect within the bump steer, so Whiteline has cleverly packaged these items together to give you additional camber during turn in (achieved through the offset in the low compliance bushing), improved anti dive geometry and neutralized bump steer correction. This kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering.\u003c\/p\u003e\n\u003cp\u003eCombine key selected Whiteline bushings with Whiteline sway bar, alignment and bracing products for the ultimate street performance package! #gripactivated #Project22\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KCA474_1024x1024_2x_04536835-c725-4a75-894a-62560a6bdc82.jpg?v=1596494101\" alt=\"Whiteline front anti lift control arm bushings with two gold spacers\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eWhiteline's engineered \"Synthetic Elastomer\" bushings feature the quality ride of rubber at lower speeds, and at higher speeds they react under cornering, accelerating and braking loads, for chassis control and improved handling. The advanced synthetic elastomer characteristics ensure superior elasticity, memory and outright durability for all forms of driving applications, and the formulation boasts resistance to oil, grease, ozone and weathering.\u003c\/p\u003e\n\u003cp\u003eWhiteline's installation guide describes the kit as 2 elastomer surrounded spherical bushings and 2 spacers of 6mm, with the bushing offset for increased caster. Whiteline rates the kit as performance alignment that suits the steel arm and adds +0.5 deg caster plus anti-lift.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront anti lift bushing kit\u003c\/li\u003e\n\u003cli\u003eAdditional camber during turn in, through the offset in the low compliance bushing\u003c\/li\u003e\n\u003cli\u003eImproved anti dive geometry and neutralized bump steer correction\u003c\/li\u003e\n\u003cli\u003eTightens up the front suspension: more nimble and responsive during acceleration, braking and cornering\u003c\/li\u003e\n\u003cli\u003eAdds +0.5 deg caster plus anti-lift; suits the steel arm (Whiteline)\u003c\/li\u003e\n\u003cli\u003eSynthetic elastomer: superior elasticity, memory and outright durability, resistant to oil, grease, ozone and weathering\u003c\/li\u003e\n\u003cli\u003eLubricant: supplied with extreme pressure molybdenum disulphide (LM) based grease (where required) for extended life\u003c\/li\u003e\n\u003cli\u003eInstaller friendly: designed with the installer in mind, reducing the need for specialised skills, tools and equipment\u003c\/li\u003e\n\u003cli\u003eBlack: the neutral appearance favoured by restorers and racers\u003c\/li\u003e\n\u003cli\u003eKit: 2 bushings and 2 spacers (Whiteline)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KCA474-2_1024x1024_2x_b31ed5b4-7d2b-4d8d-92e1-78e7c17ac2eb.jpg?v=1640471270\" alt=\"Whiteline anti lift bushings, face and side view, with gold spacers\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Guide:\u003c\/strong\u003e \u003ca href=\"http:\/\/www.whiteline.com.au\/docs\/install_guides\/Z5845.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDownload Now\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWhiteline quotes 2.5 hours to install and recommends a suspension specialist. \u003cstrong\u003eWheel Alignment Required?\u003c\/strong\u003e Yes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLubrication guide:\u003c\/strong\u003e in the majority of applications Whiteline bushings act as a flexible bearing and must be greased at the time of assembly. To gain optimum performance from Whiteline products, take the following precautions when installing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure all suspension parts are free from rust, scale, paint and previous rubber deposits.\u003c\/li\u003e\n\u003cli\u003eUse these hints along with any instructions provided when fitting Whiteline products. The vehicle manufacturer's manual should be used to ensure Whiteline warranty compliance.\u003c\/li\u003e\n\u003cli\u003eShackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage; any damaged components must be replaced or repaired to the vehicle manufacturer's tolerances.\u003c\/li\u003e\n\u003cli\u003eGrease has been supplied in the kits where required and must be used to optimise bush performance and durability. The grease is formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide, for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point. Apply it to the bores and outer flanges of all bushes and components; do not grease the outside surfaces of bushes and components.\u003c\/li\u003e\n\u003cli\u003eNote: the major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhiteline's guide says the supplied 6mm spacer can go in one of two places, depending on driver preference and driving style: on the high side it promotes better power delivery to the ground, and on the low side it promotes improved stability under brakes. Re-use all original nuts and bolts, tightened to the manufacturer's spec. A wheel alignment is required to correct the front toe setting, and the bolts should be re-checked after 100 km. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_FvLX0KN4Gl.png?v=1640471270\" alt=\"Whiteline diagram of the front suspension showing the lower control arm bushing position\" loading=\"lazy\" width=\"605\" height=\"388\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eAll Whiteline bushing kits are backed by a lifetime warranty. The vehicle manufacturer's manual should be used when fitting to ensure Whiteline warranty compliance. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai Elantra GT Sport, Elantra GT N Line, Elantra Sport, Veloster Turbo 2, Veloster N, Kona N and Elantra N, and the Kia Forte GT and Forte5. All confirmed fitment.\u003c\/p\u003e\n\u003ch3\u003eWhat does it fix?\u003c\/h3\u003e\n\u003cp\u003eLower control arm movement under hard acceleration and braking, which causes axle tramp, poor launch and poor power delivery, and the bump steer that generates 'toe in' under hard braking. It also gives additional camber during turn in and improved anti dive geometry.\u003c\/p\u003e\n\u003ch3\u003eWhich way should the spacer go?\u003c\/h3\u003e\n\u003cp\u003eWhiteline's guide says it depends on driving style: on the high side it promotes better power delivery to the ground, on the low side improved stability under brakes.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. A wheel alignment is required to correct the front toe setting.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31684563632151,"sku":"KCA474","price":203.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KCA474_1024x1024_2x_04536835-c725-4a75-894a-62560a6bdc82.jpg?v=1596494101"},{"product_id":"whiteline-front-suspension-lower-control-arm-bushings","title":"Front Suspension Lower Control Arm Performance Bushings","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK AT ALL TIMES \/ SHIPS WITHIN 24 HOURS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese bushings are a must for anyone starting with suspension mods: they reduce control arm movement within the subframe, and the results are impressive, a more connected feel from the driver's wheel when cornering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT Sport \/ Hyundai Elantra GT N Line \/ Hyundai Elantra Sport \/ Hyundai Veloster Turbo 2 \/ Kia Forte GT \/ Kia Forte5 \/ Hyundai Veloster N \/ Hyundai Kona \/ EN \/ KN.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline front suspension lower control arm performance bushings. These Control Arm Bushing Kits are arguably the best upgrade for your dollar on our cars: an inexpensive upgrade with big results, giving a much tighter driving experience and increased driver connection with the vehicle.\u003c\/p\u003e\n\u003cp\u003eWorn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition with Whiteline's advanced synthetic elastomer bushings.\u003c\/p\u003e\n\u003cp\u003e#gripactivated #project22\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_1_2af2b9f0-93b9-4a8a-af09-2ed57231c631.jpg?v=1596494324\" alt=\"Whiteline front lower control arm performance bushings: black synthetic elastomer bushings\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eWhiteline's advanced synthetic elastomer bushings have core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications. They reduce control arm movement within the subframe for a more connected feel when cornering.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced synthetic elastomer bushings\u003c\/li\u003e\n\u003cli\u003eSuperior elasticity, memory and outright durability for all forms of driving applications\u003c\/li\u003e\n\u003cli\u003eReduces control arm movement within the subframe\u003c\/li\u003e\n\u003cli\u003eA more connected feel from the driver's wheel when cornering\u003c\/li\u003e\n\u003cli\u003eA much tighter driving experience and increased driver connection with the vehicle\u003c\/li\u003e\n\u003cli\u003eRestores worn front control arm bushings to as new condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_ce484d8a-9609-44df-b72a-54128dd088e3.jpg?v=1596494324\" alt=\"Whiteline black bushings with their steel inner sleeves\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThese bushings replace worn front control arm bushings. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/WL25_02.jpg?v=1596494324\" alt=\"Whiteline diagram marking the lower control arm front bushing location on the front suspension\" loading=\"lazy\" width=\"3500\" height=\"2494\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWhiteline gives a lifetime warranty against manufacturing defects in material and workmanship for the original vehicle the part is installed on. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eHyundai Elantra GT Sport, Elantra GT N Line, Elantra Sport, Veloster Turbo 2, Veloster N, Kona, EN and KN, plus the Kia Forte GT and Forte5.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes. It is in stock at all times and ships within 24 hours.\u003c\/p\u003e\n\u003ch3\u003eWhy upgrade these bushings?\u003c\/h3\u003e\n\u003cp\u003eThey reduce control arm movement within the subframe, for a much tighter driving experience and increased driver connection with the vehicle. Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31684566679575,"sku":"W53492","price":63.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Image_1_2af2b9f0-93b9-4a8a-af09-2ed57231c631.jpg?v=1596494324"},{"product_id":"whiteline-suspension-rear-24mm-anti-roll-bar-bhr98xz","title":"Rear 24mm Anti Roll Bar","description":"\u003cp\u003e\u003cstrong\u003eON ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe highly recommend Whiteline end links with a sway bar upgrade: we have seen the OEM links break from having an upgraded bar.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT Sport, Hyundai Elantra Sport, Hyundai Elantra GT N Line, Hyundai Veloster Turbo 2, Kia Forte GT, Forte5 and Hyundai Veloster N. Also listed for the Hyundai i30 PD 2017-2019 and the 2017-2020 Elantra Sport.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline's 24mm rear anti-roll bar (sway bar) with 2-position adjustment, perfectly suited to the Veloster N. Whiteline calls it the Rear Sway Bar - 24mm Heavy Duty Blade Adjustable.\u003c\/p\u003e\n\u003cp\u003eWhiteline sway bars are designed and engineered to dramatically improve grip, handling, and outright performance. They are available for front or rear sway bar applications, depending on your suspension part needs, to bring out the absolute best-handling performance possible in your vehicle. So, when you're servicing your sway bar assembly, choose Whiteline, the suspension experts! #gripactivated\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/sway.jpg?v=1596494953\" alt=\"Whiteline 24mm rear sway bar with two mounting bushings in saddles and two gold lateral locks\" loading=\"lazy\" width=\"600\" height=\"600\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eA solid steel bar, 24.00mm (0.945 in.) in diameter, with a silver powdercoated finish. Each end has a blade with two holes for the 2-position adjustment: Whiteline lists the soft setting (comfort \/ low grip) as 23.5mm and the hard setting (maximum roll control) as 24.5mm. Mounting hardware is included; Whiteline lists 2 bushings, 2 saddles and 2 lateral locks with the bar.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSway Bar Position: Rear\u003c\/li\u003e\n\u003cli\u003eRear Sway Bar Type: Solid\u003c\/li\u003e\n\u003cli\u003eRear Sway Bar Adjustable: 2-position\u003c\/li\u003e\n\u003cli\u003eRear Sway Bar Diameter (in): 0.945 in.\u003c\/li\u003e\n\u003cli\u003eRear Sway Bar Diameter (mm): 24.00mm\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes\u003c\/li\u003e\n\u003cli\u003eSway Bar Finish: Silver powdercoated\u003c\/li\u003e\n\u003cli\u003eSway Bar Material: Steel\u003c\/li\u003e\n\u003cli\u003eKit contents: 1 sway bar, 2 bushings, 2 saddles, 2 lateral locks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/sway1.jpg?v=1596494953\" alt=\"Whiteline rear sway bar shown full length with its bushings, saddles and lateral locks\" loading=\"lazy\" width=\"600\" height=\"397\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWhiteline lists the installation time as 1 hour, with no wheel alignment required. We highly recommend fitting Whiteline end links with the bar, because we have seen the OEM links break from having an upgraded bar. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/sway3.jpg?v=1596494953\" alt=\"Close-up of the sway bar end blade with its two adjustment holes\" loading=\"lazy\" width=\"600\" height=\"400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWhiteline gives a lifetime warranty against manufacturing defects in material and workmanship for the original vehicle the part is installed on. Competition, motorsport or off-road use, normal wear, incorrect installation and labour are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes it fit the Veloster N?\u003c\/h3\u003e\n\u003cp\u003eYes. It is perfectly suited to the Veloster N.\u003c\/p\u003e\n\u003ch3\u003eIs it adjustable?\u003c\/h3\u003e\n\u003cp\u003eYes, it has 2 positions. Whiteline lists the soft setting as 23.5mm and the hard setting as 24.5mm.\u003c\/p\u003e\n\u003ch3\u003eDo I need new end links?\u003c\/h3\u003e\n\u003cp\u003eWe highly recommend Whiteline end links with a sway bar upgrade; we have seen the OEM links break from having an upgraded bar.\u003c\/p\u003e\n\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\n\u003cp\u003eYes. Whiteline lists 2 bushings, 2 saddles and 2 lateral locks with the bar.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31684574314519,"sku":"BHR98XZ","price":357.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/sway.jpg?v=1596494953"},{"product_id":"rear-led-lighting-bulb-set","title":"Rear LED Lighting Bulb Conversion Kit Elantra N","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Nearly all Hyundai and Kia models whose factory rear turn-signal, reverse and license-plate bulbs are not already LED, including the Elantra N, Veloster N, Kia Forte, Elantra GT Sport, Elantra Sport, Veloster Turbo and more. CANBUS-friendly.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA rear-exterior LED bulb conversion that we sell as a complete set. It replaces your factory rear turn-signal, reverse-light and license-plate bulbs. The reverse and license-plate bulbs are white, not blue; the turn-signal bulbs are amber.\u003c\/p\u003e\n\u003cp\u003eOwners report that the LEDs are bright and crisp, much brighter than the stock bulbs, with no hyperflash as advertised and the bulbs well laid out in the package. An owner reports an easy install on a 2022 Veloster N DCT.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_W2HdU9ezdI_e78f968d-36d0-48d4-9e49-e20074c6fb37.png?v=1626063313\" alt=\"Two black CANBUS LED wedge bulbs with yellow SMD emitters from the N75 rear LED bulb conversion kit\" loading=\"lazy\" width=\"548\" height=\"376\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe bulbs are CANBUS-friendly, so the car throws no bulb-out warning and no hyperflash. The LEDs are rated at 50,000 hours. Each bulb goes into the factory socket in place of the original rear bulb.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete rear set: 2 turn-signal bulbs, 2 reverse-light bulbs and 2 license-plate bulbs\u003c\/li\u003e\n\u003cli\u003eWhite reverse and license-plate bulbs (not blue); amber turn-signal bulbs\u003c\/li\u003e\n\u003cli\u003eCANBUS-friendly: no bulb-out warning and no hyperflash\u003c\/li\u003e\n\u003cli\u003eLEDs rated at 50,000 hours\u003c\/li\u003e\n\u003cli\u003eFits the existing factory sockets\u003c\/li\u003e\n\u003cli\u003eOptional full interior LED set, which comes with a trim tool to aid installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/led.jpg?v=1626063313\" alt=\"Rear of a Hyundai hatchback at night with the LED license-plate lights lit\" loading=\"lazy\" width=\"1080\" height=\"608\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Full LED Interior Kit:\u003c\/strong\u003e No or Yes. Yes adds a full interior LED set and a trim tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe kit replaces the factory rear bulbs in their existing sockets, and its CANBUS circuitry means no bulb-out warning and no hyperflash. The license-plate housings use small screws, so take care removing and refitting them. If you add the interior kit, its included trim tool helps with installation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_38binJgUwJ_9975f161-9f08-4f2c-b3c5-acce1da6e270.png?v=1626063313\" alt=\"Graphic of the CANBUS LED bulb with the words CANBUS no error and no hyperflash\" loading=\"lazy\" width=\"559\" height=\"561\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill it fit my car?\u003c\/h3\u003e\n\u003cp\u003eIt fits nearly all Hyundai and Kia models without factory LED rear bulbs, including the Elantra N, Veloster N, Kia Forte, Elantra GT Sport, Elantra Sport and Veloster Turbo. If you are not sure, email info@n75motorsports.ca with your model and year.\u003c\/p\u003e\n\u003ch3\u003eWill it cause hyperflash or a bulb-out warning?\u003c\/h3\u003e\n\u003cp\u003eNo. The bulbs are CANBUS-friendly, so there is no hyperflash and no bulb-out warning on the dash.\u003c\/p\u003e\n\u003ch3\u003eAre the turn signals white too?\u003c\/h3\u003e\n\u003cp\u003eNo. The reverse and license-plate bulbs are white; the turn-signal bulbs are amber.\u003c\/p\u003e\n\u003ch3\u003eWhat does the interior kit add?\u003c\/h3\u003e\n\u003cp\u003eChoosing Yes adds a full interior LED set, which comes with a trim tool to aid installation.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"No","offer_id":42049714487482,"sku":"CON-567","price":69.99,"currency_code":"CAD","in_stock":false},{"title":"Yes","offer_id":42049714520250,"sku":"LED32","price":89.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_W2HdU9ezdI_e78f968d-36d0-48d4-9e49-e20074c6fb37.png?v=1626063313"},{"product_id":"copy-of-motul-sport-engine-oil-5w40","title":"Molygen 5W-40 Engine oil Full Synthetic","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN75 Motorsports does not recommend using this product back to back. Use a non Molygen oil every other oil change.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: modern gasoline and diesel engines, with and without exhaust gas turbochargers, that call for SAE 5W-40 and one of the specifications listed below. Liqui Moly Molygen 5W\/40 in 5-liter.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eLiqui Moly Molygen 5W\/40 in 5-liter: a low-viscosity, high-tech, low-friction motor oil with high shear stability, made in Germany with Liqui Moly's revolutionary Molecular Friction Control (MFC) formula. It is an optimum choice for your VW, Audi, Porsche or BMW, for performance and long-lasting engine life, and for turbo or naturally aspirated German vehicles you want to live a long, happy and properly lubricated life.\u003c\/p\u003e\n\u003cp\u003eLiqui Moly makes this formula in 5W\/40 (1 \u0026amp; 5L) and SAE 5W\/30 (1 \u0026amp; 5L); this listing is the 5W\/40 in a 5L jug.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_mpByDKHJwn.png?v=1609488544\" alt=\"Liqui Moly Molygen New Generation 5W-40 engine oil, 5 litre jug\" loading=\"lazy\" width=\"643\" height=\"632\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"349\" src=\"https:\/\/www.youtube.com\/embed\/9Oqv5NhS32w\" width=\"620\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eLiqui Moly combines innovative additive technology with the special Molygen additive. It reliably prevents the formation of deposits, reduces frictional losses in the engine and provides optimum protection against wear; the results are savings in fuel and an extended service life for the engine.\u003c\/p\u003e\n\u003cp\u003eThe oil is now a fluorescent green color, with synthetic tungsten-based friction modifiers: longer engine life, lower fuel consumption, and a 15% lower friction coefficient to reduce wear by up to 30%. Nothing is close to zero friction! It pairs Molecular Friction Control Technology with UV modifiers to spot oil leaks.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutstanding engine cleanliness\u003c\/li\u003e\n\u003cli\u003eExcellent high and low-temperature behavior\u003c\/li\u003e\n\u003cli\u003eFriction and wear reducing: a 15% lower friction coefficient reduces wear by up to 30%\u003c\/li\u003e\n\u003cli\u003eOptimum stability to aging\u003c\/li\u003e\n\u003cli\u003eExcellent wear protection\u003c\/li\u003e\n\u003cli\u003eMixable with all commercially available motor oils\u003c\/li\u003e\n\u003cli\u003eOutstanding lubrication reliability\u003c\/li\u003e\n\u003cli\u003eHigh shear stability\u003c\/li\u003e\n\u003cli\u003eTested for turbochargers and catalytic converters\u003c\/li\u003e\n\u003cli\u003eRapid oil delivery at low temperatures\u003c\/li\u003e\n\u003cli\u003eUV modifiers to spot oil leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiqui Moly recommends it for vehicles or assemblies for which the following specifications or original part numbers are required:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eACEA A3\u003c\/li\u003e\n\u003cli\u003eACEA B4\u003c\/li\u003e\n\u003cli\u003eAPI SN\u003c\/li\u003e\n\u003cli\u003eBMW Longlife-01 (up to 2018)\u003c\/li\u003e\n\u003cli\u003eMB 229.5\u003c\/li\u003e\n\u003cli\u003ePorsche A40\u003c\/li\u003e\n\u003cli\u003eRenault RN 0700\u003c\/li\u003e\n\u003cli\u003eVW 502 00\u003c\/li\u003e\n\u003cli\u003eVW 505 00\u003c\/li\u003e\n\u003cli\u003eLiqui Moly's current list also includes Fiat 9.55535-H2, 9.55535-N2 and 9.55535-Z2, GWM, HAVAL, Opel GM-LL-B-025 and Renault RN 0710\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlash point 220 °C (428 °F), DIN ISO 2592\u003c\/li\u003e\n\u003cli\u003eTotal base number 11,3 mg KOH\/g, DIN ISO 3771\u003c\/li\u003e\n\u003cli\u003eSulfate ash 1,0 - 1,6 g\/100g, DIN 51575\u003c\/li\u003e\n\u003cli\u003eColor \/ appearance: green, fluorescent (grün, fluoreszierend)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eBest for modern gasoline and diesel engines with and without exhaust gas turbochargers, and for the protection and value retention of the engine during long intervals between oil changes and with high loads. Note the vehicle and engine manufacturers' operating instructions.\u003c\/p\u003e\n\u003cp\u003eIt can be mixed with all commercially available motor oils, but full effectiveness is only achieved when the product is used on its own (i.e. no mixing). N75 Motorsports does not recommend using this product back to back: use a non Molygen oil every other oil change.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I use it at every oil change?\u003c\/h3\u003e\n\u003cp\u003eWe do not recommend using it back to back. Use a non Molygen oil every other oil change.\u003c\/p\u003e\n\u003ch3\u003eCan I mix it with other oils?\u003c\/h3\u003e\n\u003cp\u003eIt can be mixed with all commercially available motor oils, but full effectiveness is only achieved when it is used on its own.\u003c\/p\u003e\n\u003ch3\u003eIs it safe with a turbo and catalytic converter?\u003c\/h3\u003e\n\u003cp\u003eYes. It is tested for turbochargers and catalytic converters.\u003c\/p\u003e\n\u003ch3\u003eHow much oil is in the jug?\u003c\/h3\u003e\n\u003cp\u003e5L. This listing is Liqui Moly Molygen 5W\/40 in 5-liter.\u003c\/p\u003e","brand":"Liqui Moly","offers":[{"title":"Default Title","offer_id":31700634075159,"sku":"LM20232","price":84.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_mpByDKHJwn.png?v=1609488544"},{"product_id":"takeda-momentum-cold-air-intake-system-w-pro-dry-s-filter-elantra-n-line-egts-es","title":"Takeda Momentum Cold Air Intake System ES\/EGTS\/Forte\/VT2\/GTN-Line","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK, SHIPS WITHIN 24 HOURS: Wet Filter IN STOCK, Dry Filter IN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 2017-2020 Hyundai Elantra Sport, 2018 Hyundai Elantra GT Sport, 2019-2020 Hyundai Elantra GT N Line, 2019-2021 Hyundai Veloster Turbo 2 and 2020-UP Kia Forte GT \/Forte5, all with the L4 1.6L turbo engine.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe aFe Takeda Momentum cold air intake system for the 1.6L turbo Hyundai Elantra Sport, Elantra GT Sport and N Line, Veloster Turbo 2 and Kia Forte GT. Its sealed housing captures cool air directly behind the front grille, and an oversized tube with an import-inspired Takeda design carries it to the engine.\u003c\/p\u003e\n\u003cp\u003eThis intake can be installed without the airbox as an SRI, or with it for the closed loop system. This is one reason why we recommend these intakes. Secondly, the tube is plastic, so it does not absorb heat. Lastly, it is a full cover with the biggest box possible for maximum airflow.\u003c\/p\u003e\n\u003cp\u003eaFe's own product page has the overview, vehicle applications, reviews and add-ons for this system.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/afe-56-70005d_kc_xl.jpg?v=1614814711\" alt=\"aFe Takeda Momentum cold air intake for the 1.6T Hyundai Elantra Sport, Veloster Turbo and Kia Forte GT, black sealed housing with Takeda badge and intake tube\" loading=\"lazy\" width=\"1600\" height=\"1200\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMomentum's unique filter-to-housing interface was built to feature the largest air filter possible. On the Dry version this is aFe's large three layer performance air filter: a 7-1\/2\" tall, 360-degree radial flow filter with a 4\" flange and oil-free Pro DRY S media, with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.\u003c\/p\u003e\n\u003cp\u003eThe one-piece sealed housing is constructed of heat-resistant cross-linked polyethylene (XLPE) and features aFe's patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or it can be closed with an included plug.\u003c\/p\u003e\n\u003cp\u003eThe intake tube is a high quality, computer-designed, dyno-tuned tube that achieves maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable, and it features a Takeda design inspired by import vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/afepower.com\/media\/wysiwyg\/logos\/takeda-logo.1586987904.jpg\" alt=\"aFe Takeda logo\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDyno-proven gains up to +11 HP and +10 Lbs. x Ft. TQ (aFe figures for the Dry filter version)\u003c\/li\u003e\n\u003cli\u003eOutflows the factory intake by 37% (Dry filter version)\u003c\/li\u003e\n\u003cli\u003eMeasured flow: 295 CFM @ 7\" H2O (Dry filter version)\u003c\/li\u003e\n\u003cli\u003eSealed housing captures cool air directly behind the front grille\u003c\/li\u003e\n\u003cli\u003eOversized tube with import-inspired design\u003c\/li\u003e\n\u003cli\u003eInnovative filter-to-housing interface and minimal hardware for fast and easy installation (roughly 20 minutes)\u003c\/li\u003e\n\u003cli\u003eWashable and reusable Pro DRY S air filter for maximum convenience (Dry filter version)\u003c\/li\u003e\n\u003cli\u003ePlastic XLPE tube that does not absorb heat\u003c\/li\u003e\n\n\u003cli\u003eaFe application summary: Hyundai Elantra \/ Elantra GT \/ i30 17-20 \/ Veloster 19-20 L4-1.6TGDI\u003c\/li\u003e\n\u003cli\u003eaFe vehicle applications, all L4 1.6L gas: 2017-2020 Hyundai Elantra Sport; 2018 Hyundai Elantra GT Sport, Sport ultimate; 2019-2020 Hyundai Elantra GT N Line; 2017-2020 Hyundai i30 (international vehicle); 2019-2020 Hyundai Veloster Turbo R-spec\/turbo\/turbo ultimate; 2019-2020 Kia Forte GT. aFe's current product page lists the Veloster for 19-21, and aFe files this intake under its 19-24 Forte GT, in line with our fitment list above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/afe-56-70005d_qq_xl_0e118bf1-18cf-4c94-91cc-d4a8b1fe6102.jpg?v=1614814711\" alt=\"aFe Takeda Momentum intake kit laid out: intake tube, silicone coupling and clamps, Pro DRY S filter, sealed housing, plug and hardware\" loading=\"lazy\" width=\"1600\" height=\"1200\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e Dry or Wet. Dry has the oil-free Pro DRY S filter described above; the power and flow figures above are aFe's figures for this version. Wet has a pre-oiled Pro 5R filter of the same 7-1\/2\" height and 4\" flange, made of five layers of progressively finer cotton gauze media; aFe rates this media as perfect for street and\/or track use. aFe's figures for the Wet version are up to +16 HP and +14 Lbs. x Ft. TQ, outflowing the factory intake by 42%, with a measured flow of 305 CFM @ 7\" H2O.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eStainless-steel clamps and reinforced silicone couplings are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation (roughly 20 minutes), and the included billet aluminum fittings allow stock connections to transfer over seamlessly.\u003c\/p\u003e\n\u003cp\u003eEmissions disclaimer: this product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. See also aFe's \u003ca href=\"https:\/\/afepower.com\/prop-65\"\u003eProp 65 Warning\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/afe-56-70005d_xl.jpg?v=1614814711\" alt=\"aFe Takeda Momentum cold air intake installed in the engine bay of a Hyundai with the 1.6 T-GDI engine\" loading=\"lazy\" width=\"1600\" height=\"1200\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eaFe Power gives a 2-year warranty on the components of its air intake systems to the original purchaser, with proof of purchase; parts used on race vehicles are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe 2017-2020 Hyundai Elantra Sport, 2018 Elantra GT Sport, 2019-2020 Elantra GT N Line, 2019-2021 Veloster Turbo 2 and 2020-UP Kia Forte GT \/Forte5, all with the L4 1.6L turbo engine.\u003c\/p\u003e\n\u003ch3\u003eDry or Wet filter: which should I choose?\u003c\/h3\u003e\n\u003cp\u003eBoth are in stock. The Dry version uses aFe's oil-free Pro DRY S media, which is best suited for street use and does not need oil. The Wet version uses pre-oiled Pro 5R cotton gauze media, which aFe rates as perfect for street and\/or track use; aFe's figures for it are up to +16 HP and +14 Lbs. x Ft. TQ, against +11 HP and +10 Lbs. x Ft. TQ for the Dry.\u003c\/p\u003e\n\u003ch3\u003eHow long does installation take?\u003c\/h3\u003e\n\u003cp\u003eRoughly 20 minutes. The kit uses minimal hardware, and the included billet aluminum fittings let the stock connections transfer over.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes. The Wet filter and Dry filter versions are both IN STOCK and ship within 24 hours.\u003c\/p\u003e","brand":"aFe Power","offers":[{"title":"Dry","offer_id":37694766776506,"sku":"56-70005D-1","price":519.99,"currency_code":"CAD","in_stock":true},{"title":"Wet","offer_id":37694766809274,"sku":"56-70005R-2","price":499.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/afe-56-70005d_kc_xl.jpg?v=1614814711"},{"product_id":"dei-reflect-a-gold-heat-shield-barrier-2x15","title":"DEI Reflect-A-Gold Heat Shield Barrier Self Adhesive Tape","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: a self-adhesive tape, not vehicle-specific. Use it on intake pipes, intercooler and charge piping, the intake manifold, air boxes, firewalls, engine covers, bulkheads, heat shields and any surface that needs protection from radiant heat. DEI part numbers 010395 (1.5\" x 30') and 010397 (2\" x 30').\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eDEI Reflect-A-Gold is a universal, self-adhesive gold heat-reflective tape made by Design Engineering, Inc. It reflects radiant heat and handles continuous temperatures up to 800°F. It reduces heat soak into air boxes, seats, firewalls, transmission tunnels and intakes, and it is suited to race and track use.\u003c\/p\u003e\n\u003cp\u003eOwners report that it works well and looks good. We also offer to wrap the end tanks and cold pipe of our FMIC (front-mount intercooler) kit with this tape.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/heat-shieldings-heat-reflective-tape-gold_1.jpg?v=1602112247\" alt=\"DEI Reflect-A-Gold heat reflective tape wrapped on an intake tube and heat shield in an engine bay, with rolls of the tape\" loading=\"lazy\" width=\"960\" height=\"685\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe tape is a metalized polyimide laminated to a lightweight glass-fiber cloth, with a high-temperature pressure-sensitive adhesive protected by a release liner. It is 0.0065\" thick, lightweight and needs minimal clearance, and it will not lift off.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReflects radiant heat; handles continuous temperatures up to 800°F\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive, with the adhesive and release liner rated up to 325°F\u003c\/li\u003e\n\u003cli\u003eMetalized polyimide on a lightweight glass-fiber cloth\u003c\/li\u003e\n\u003cli\u003e0.0065\" thick, minimal clearance\u003c\/li\u003e\n\u003cli\u003eResists UV degradation\u003c\/li\u003e\n\u003cli\u003eEasy to apply and will not lift off\u003c\/li\u003e\n\u003cli\u003eReduces heat soak into air boxes, seats, firewalls, transmission tunnels and intakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dei.jpg?v=1602112260\" alt=\"Roll of DEI Reflect-A-Gold gold self-adhesive heat-reflective tape, partly unrolled, on a white background\" loading=\"lazy\" width=\"1280\" height=\"1275\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1.5\" x 30' (DEI part 010395) or 2\" x 30' (DEI part 010397). Choose the width to suit the surface: 1.5\" for narrower pipes and tight runs, 2\" for wider pipes, end tanks and larger panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eApply it to a clean, dry surface. Cut the tape to length, peel back the release liner, and press it down firmly. DEI says not to apply it directly to exhaust components.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dei_reflect_a_gold_tape_2_inch_x_30ft_roll_1475819717_57016a3a.jpg?v=1602112258\" alt=\"Roll of DEI Reflect-A-Gold heat reflective tape in its retail pack\" loading=\"lazy\" width=\"640\" height=\"640\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat sizes does it come in?\u003c\/h3\u003e\n\u003cp\u003e1.5\" x 30' and 2\" x 30'; pick the width to suit the surface.\u003c\/p\u003e\n\u003ch3\u003eHow hot can it handle?\u003c\/h3\u003e\n\u003cp\u003eIt reflects radiant heat and handles continuous temperatures up to 800°F; the adhesive and release liner are rated up to 325°F.\u003c\/p\u003e\n\u003ch3\u003eWhere can I use it?\u003c\/h3\u003e\n\u003cp\u003eIntake and intercooler piping, the intake manifold, air boxes, firewalls, engine covers, bulkheads, seat bottoms and any area that needs protection from radiant heat. It is self-adhesive and universal.\u003c\/p\u003e\n\u003ch3\u003eCan I put it on my exhaust?\u003c\/h3\u003e\n\u003cp\u003eNo. DEI says not to apply it directly to exhaust components.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"1.5\"x30'","offer_id":32904426291223,"sku":"DEI10395","price":117.25,"currency_code":"CAD","in_stock":false},{"title":"2\"x30'","offer_id":32904426258455,"sku":"DEI10397","price":117.25,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/heat-shieldings-heat-reflective-tape-gold_1.jpg?v=1602112247"},{"product_id":"oem-intake-cone-filter-conversion","title":"Factory Intake Cone Filter Conversion (Air Intake)","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e All 1.6T engines, all KDM models. A direct replacement that fits on the end of the OEM air intake in place of the OEM airbox.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA cheap and easy way to make your engine sing! Remove your OEM airbox, install this filter at the end of the OEM air intake where it normally connects to the airbox, and get all the sounds of a true intake for a fraction of the cost. No ECU tuning required.\u003c\/p\u003e\n\u003cp\u003eIt is a fantastic cheap alternative to intakes: this will give you 75% of the sound and performance of an SRI intake. It is also a great mod to get started on modifying cars; we ourselves used this setup before an intake on our 1.6T tester.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/3.jpg?v=1602826359\" alt=\"Green cone air filter with chrome honeycomb mesh, red trim ring and HKS logo centre cap\" loading=\"lazy\" width=\"960\" height=\"960\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eA cone filter that replaces the OEM airbox and mounts directly on the end of the OEM air intake. The design of this filter gives any intake an amazing sound.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for the OEM airbox, at the end of the OEM air intake\u003c\/li\u003e\n\u003cli\u003eNo ECU tuning required\u003c\/li\u003e\n\u003cli\u003eAll the sounds of a true intake for a fraction of the cost\u003c\/li\u003e\n\u003cli\u003e75% of the sound and performance of an SRI intake\u003c\/li\u003e\n\u003cli\u003eFits all 1.6T engines, all KDM models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/1.jpg?v=1602826359\" alt=\"Close-up of the cone filter's green filter element behind the chrome honeycomb mesh and red trim ring\" loading=\"lazy\" width=\"960\" height=\"960\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eRemove your OEM airbox and install this filter at the end of the OEM air intake, where it normally connects to the airbox. This is a direct replacement, and no ECU tuning is required. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/2.jpg?v=1602826359\" alt=\"Underside of the cone filter showing the black inlet coupler on the gold base plate\" loading=\"lazy\" width=\"960\" height=\"960\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDo I need a tune?\u003c\/h3\u003e\n\u003cp\u003eNo. No ECU tuning required.\u003c\/p\u003e\n\u003ch3\u003eHow does it compare with a full intake?\u003c\/h3\u003e\n\u003cp\u003eIt will give you 75% of the sound and performance of an SRI intake, for a fraction of the cost.\u003c\/p\u003e\n\u003ch3\u003eWhich engines does it fit?\u003c\/h3\u003e\n\u003cp\u003eAll 1.6T engines, all KDM models.\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":31735220469783,"sku":"13646","price":89.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/3.jpg?v=1602826359"},{"product_id":"k-n-drop-in-panel-air-filter","title":"Hyundai \/ Kia 1.6T Performance High Flow Filter","description":"\u003cp\u003e\u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN Day Sale\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Up to 2020 Model Year Hyundai Elantra Sport, Kia Forte GT and Hyundai Veloster Turbo (Hyundai \/ Kia 1.6T).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA K\u0026amp;N performance high flow filter for the Hyundai \/ Kia 1.6T: performance from the intake system while keeping the closed loop OEM intake, and added performance without any worries of dealership warranty issues. Some people prefer these over full intake systems.\u003c\/p\u003e\n\u003cp\u003eThis is the minimum requirement for an ECU tune. Tuning on the OEM intake is possible, but a higher flow intake is needed. This gets the job done.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/kn-33-5050_alt_3.jpg?v=1599098191\" alt=\"K\u0026amp;N high flow panel air filter for the Hyundai and Kia 1.6T, red pleated media in a black frame\" loading=\"lazy\" width=\"720\" height=\"720\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eA high flow filter that goes in the OEM intake in place of the factory filter, so the intake stays a closed loop system.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh flow performance filter\u003c\/li\u003e\n\u003cli\u003eKeeps the closed loop OEM intake\u003c\/li\u003e\n\u003cli\u003eAdded performance without any worries of dealership warranty issues\u003c\/li\u003e\n\u003cli\u003eThe minimum requirement for an ECU tune\u003c\/li\u003e\n\u003cli\u003eFor up to 2020 Model Year Elantra Sport, Forte GT and Veloster Turbo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MAINT_Pnl_688.jpg?v=1599098191\" alt=\"K\u0026amp;N panel air filter fitted in an open factory airbox in an engine bay\" loading=\"lazy\" width=\"1400\" height=\"1400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe filter fits the OEM intake, which stays a closed loop system; no full intake system is needed. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/33-5050_Side_1.png?v=1599098191\" alt=\"K\u0026amp;N panel air filter seen edge-on, showing its thin profile\" loading=\"lazy\" width=\"1400\" height=\"1400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eK\u0026amp;N gives its No-Hassle Lifetime Limited Warranty on its washable replacement air filters: it lasts for the lifetime of the product and covers the original purchaser only, and it is not transferable. Damage from racing, competition or any off-road use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eUp to 2020 Model Year Elantra Sport, Forte GT and Veloster Turbo, with the 1.6T.\u003c\/p\u003e\n\u003ch3\u003eIs it enough for an ECU tune?\u003c\/h3\u003e\n\u003cp\u003eThis is the minimum requirement for an ECU tune. Tuning on the OEM intake is possible, but a higher flow intake is needed, and this gets the job done.\u003c\/p\u003e\n\u003ch3\u003eWill it cause dealership warranty issues?\u003c\/h3\u003e\n\u003cp\u003eIt keeps the closed loop OEM intake, so you get added performance without any worries of dealership warranty issues.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes, it is in stock.\u003c\/p\u003e","brand":"K\u0026N Filters","offers":[{"title":"Default Title","offer_id":31739275673623,"sku":"33-5050","price":87.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/kn-33-5050_alt_3.jpg?v=1599098191"},{"product_id":"gfb-bov-t9511-deceptor-pro-ii","title":"1.6T 1.6T Deceptor Pro II In Cabin Adjustable","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 1.6T: Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Elantra GT N Line 2019-2020, Veloster Turbo 2 2019-2020 and Kona 1.6T 2019-2021, and the Kia Forte GT and Kia Forte5. GFB's own application list also includes the Hyundai Tucson 1.6 GDI Turbo (facelift) 2019-2020, i30 SR\/N-Line Hatch 1.6T-GDI (PD, 2016-on) and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eControl BOV from inside the Cabin! Turn a knob for full BOV, switch it back for full stealth mode! The GFB Deceptor Pro II is a diverter \/ blow-off valve with GFB's TMS advantage and an in-cabin sound adjustment system. So how much more can you do with a blow-off valve? Well, the Deceptor Pro II takes the 'Respons' concept even further: now you can control the sound of the BOV from inside the cabin.\u003c\/p\u003e\n\u003cp\u003eTo top it off, if your car typically suffers issues such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9511.jpg?v=1600987489\" alt=\"GFB Deceptor Pro II blow-off valve with its motor housing, silver inlet and trumpet, beside the in-cabin controller with red backlit dial\" loading=\"lazy\" width=\"639\" height=\"455\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe venting bias is adjusted electronically on-the-fly. A high-torque geared electric motor drives the volume adjustment mechanism, through a durable, low-friction gear train supported by a precision sealed ball-bearing. The sleek, compact in-car controller has a backlit dial and gives remote proportional venting bias \/ volume control, from silent to loud or anywhere in between, with end point adjustment to control the maximum vent to atmosphere bias setting. Revised porting optimises flow and venting bias, the compact design fits in most factory valve locations, and a new bore finishing process ensures a lifetime of reliable operation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/gfb.com.au\/wp-content\/uploads\/2018\/11\/deceptor.jpg\" alt=\"GFB Deceptor Pro II blow-off valve installed in an engine bay\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust your BOV venting bias electronically on-the-fly\u003c\/li\u003e\n\u003cli\u003eRemote proportional venting bias\/volume control, from silent to loud or anywhere in between\u003c\/li\u003e\n\u003cli\u003eSleek, compact in-car BOV volume controller with backlit dial\u003c\/li\u003e\n\u003cli\u003eEnd point adjustment to control maximum vent to atmosphere bias setting\u003c\/li\u003e\n\u003cli\u003eVolume adjustment mechanism driven by a high-torque geared electric motor\u003c\/li\u003e\n\u003cli\u003eDurable, low-friction gear train supported by precision sealed ball-bearing\u003c\/li\u003e\n\u003cli\u003eRevised porting to optimise flow and venting bias\u003c\/li\u003e\n\u003cli\u003eCompact design fits in most factory valve locations\u003c\/li\u003e\n\u003cli\u003eNew bore finishing process ensures a lifetime of reliable operation\u003c\/li\u003e\n\u003cli\u003eDirect bolt on for many vehicles\u003c\/li\u003e\n\u003cli\u003eSupplied with all parts and wiring required to have it up and running quickly and easily\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t95111.jpg?v=1600987489\" alt=\"Side view of the GFB Deceptor Pro II showing the motor housing, trumpet and wiring lead\" loading=\"lazy\" width=\"650\" height=\"650\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Pierburg BOV Solenoid:\u003c\/strong\u003e No (the GFB kit on its own) or Yes (the kit with a Pierburg BOV solenoid added).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eDirect bolt-on for most vehicles available, and supplied with all parts and wiring required to have it up and running quickly and easily. Complete range of fitment options: the Deceptor Pro II direct fit bolt-on range covers a huge list of popular vehicles, and you can also purchase a variety of hose and flange adaptors for custom fitments.\u003c\/p\u003e\n\u003cp\u003eGFB's instructions: the valve bolts into the factory diverter valve location, the in-cabin control box connects to an ignition-switched +12V supply and to ground, and its cable runs through the firewall to the valve. If you are not experienced in automotive wiring, GFB recommends that the installation is carried out by a professional: irreversible damage could occur if it is wired incorrectly, which is not covered by warranty. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t951111.jpg?v=1600987489\" alt=\"GFB Deceptor Pro II valve with silver inlet and trumpet, and the in-cabin controller with its wiring lead\" loading=\"lazy\" width=\"650\" height=\"650\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGo Fast Bits gives the original owner a limited lifetime warranty against defective materials or faulty workmanship, once the product is registered on GFB's website. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow do I change the sound?\u003c\/h3\u003e\n\u003cp\u003eWith the backlit dial on the in-cabin controller: from silent to loud or anywhere in between. Turn a knob for full BOV, switch it back for full stealth mode.\u003c\/p\u003e\n\u003ch3\u003eMy car backfires or stalls when venting to atmosphere. Will this help?\u003c\/h3\u003e\n\u003cp\u003eIt can. The controller can easily be configured to limit the maximum venting ratio, so you can achieve a blow-off sound without having to put up with the issues.\u003c\/p\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe 1.6T Hyundai Elantra Sport 2017-2020, Elantra GT Sport 2018, Elantra GT N Line 2019-2020, Veloster Turbo 2 2019-2020 and Kona 1.6T 2019-2021, and the Kia Forte GT and Forte5. GFB also lists the Tucson 1.6 GDI Turbo (facelift) 2019-2020, i30 SR\/N-Line Hatch 1.6T-GDI and Kia Cerato 1.6 T-GDI 2018-on.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eFREE SHIPPING to Canada and US.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"No","offer_id":37387372724410,"sku":"T9511","price":459.99,"currency_code":"CAD","in_stock":true},{"title":"Yes","offer_id":37387372691642,"sku":null,"price":559.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9511.jpg?v=1600987489"},{"product_id":"copy-of-n75-engine-oil-catch-can-universal","title":"N75 Engine Oil Catch Can Universal","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal kit for Hyundai and Kia 1.6T and 2.0T turbo engines. This is not a direct-fit kit: choose the 1.6T or 2.0T option for your engine and mount the can where it fits your engine bay.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe N75 Motorsports Engine Oil Catch Can is a universal oil catch can (OCC) kit, designed and assembled in Canada. It sits in the crankcase breather line and catches the oil and fuel vapour in the blow-by before it reaches your intake. This is a working kit, not a show piece.\u003c\/p\u003e\n\u003cp\u003eThe can holds 200 ml on the PCV kit and carries a universal mounting bracket, so you can angle it to suit your engine bay. Our goal was a catch can that works well and is simple to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/occ_5d2b4ef9-2fa8-4bb6-8609-3ef5623d31ad.jpg?v=1625874210\" alt=\"N75 Motorsports universal oil catch can kit in its box: black can with the N75 Motorsports cap, two coils of fuel injector hose, hose clamps and bagged fittings\" loading=\"lazy\" width=\"4032\" height=\"2268\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eCrankcase blow-by is the oil and fuel vapour from the crankcase, normally routed through the PCV into the intake. The catch can sits in that line and takes the oil and fuel out before it reaches the intake.\u003c\/p\u003e\n\u003cp\u003eInside the can, the vapour passes the double baffles and cooling plate, so the oil and fuel condense and fall to the bottom. The cleaned air leaves through the 50 micron filter, and a one-way check valve on the PCV hose keeps the flow going the right way.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20210101_033238.jpg?v=1625874210\" alt=\"Cutaway diagram of the catch can: oil-laden blow-by enters at IN, passes the internal baffles, and clean air leaves at OUT\" loading=\"lazy\" width=\"681\" height=\"940\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e200 ml can on the PCV kit\u003c\/li\u003e\n\u003cli\u003e50 micron filter\u003c\/li\u003e\n\u003cli\u003eDouble baffled\u003c\/li\u003e\n\u003cli\u003eCooling plate\u003c\/li\u003e\n\u003cli\u003eUniversal mounting bracket, so you mount and angle the can to suit\u003c\/li\u003e\n\u003cli\u003eOne-way check valve for the PCV line\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in Canada\u003c\/li\u003e\n\u003cli\u003eIn the kit: 1x N75 Motorsports Oil Catch Can with universal mounting bracket; 2x 5 ft lengths of 3\/8\" fuel injector hose (10 ft total); 5x hose clamps; 1x one-way check valve for the hose normally connected to the PCV; twist ties; mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/occc5_3359090f-6a99-4391-a5d4-7e8279875928.jpg?v=1625874210\" alt=\"Inside the N75 catch can: the brass 50 micron filter element and the perforated cooling and baffle plate\" loading=\"lazy\" width=\"2268\" height=\"4032\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Kit:\u003c\/strong\u003e PCV (1.6T), Extended Capacity (1.6T), PCV (2.0T) or Extended Capacity (2.0T). Choose the kit for your engine and the setup you want; the 1.6T and 2.0T choice matches the kit to your engine size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWith an OEM intake, mount the can on the passenger side; with an aftermarket intake, mount it on the driver side.\u003c\/li\u003e\n\u003cli\u003eHand-tighten the can body only, like an oil filter; that makes the air seal. Do not over-tighten, or you can damage the gasket.\u003c\/li\u003e\n\u003cli\u003eRoute the two hoses to the can, keep the one-way check valve on the PCV hose, and secure them with the supplied clamps.\u003c\/li\u003e\n\u003cli\u003eRun and tie the hoses along cooler paths, away from hot surfaces such as the turbo and exhaust side.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOwners describe it as a solid, complete kit, with ample hose and ties for clean runs, and say the universal bracket lets them mount and angle the can where they want. A Kia Forte GT owner confirms the fit, and an Elantra N owner reports fabricating a small bracket to seat the can beside the reservoir.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/PXL_20210708_013533567.jpg?v=1625874210\" alt=\"N75 Motorsports catch can mounted beside the coolant reservoir on a Hyundai N engine, with both hoses clamped\" loading=\"lazy\" width=\"1257\" height=\"943\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this a direct-fit kit?\u003c\/h3\u003e\n\u003cp\u003eNo. It is the universal kit, with a universal mounting bracket you angle to suit your engine bay.\u003c\/p\u003e\n\u003ch3\u003eWhat's the difference between the 1.6T and 2.0T options?\u003c\/h3\u003e\n\u003cp\u003eChoose the one that matches your engine size. If you are unsure which fits your car, email info@n75motorsports.ca before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat does the kit include?\u003c\/h3\u003e\n\u003cp\u003eThe can and its universal mounting bracket, 10 ft of 3\/8\" hose, five clamps, a one-way PCV check valve, twist ties and mounting screws.\u003c\/p\u003e\n\u003ch3\u003eHow tight should the can be?\u003c\/h3\u003e\n\u003cp\u003eHand tight, like an oil filter. Do not over-tighten, or you can damage the gasket.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"PCV (1.6T)","offer_id":32904646656023,"sku":"UPCV16","price":149.99,"currency_code":"CAD","in_stock":false},{"title":"Extended Capacity (1.6T)","offer_id":37783716495546,"sku":"","price":199.99,"currency_code":"CAD","in_stock":false},{"title":"PCV (2.0T)","offer_id":39917573439674,"sku":"","price":149.99,"currency_code":"CAD","in_stock":false},{"title":"Extended Capacity (2.0T)","offer_id":39917573537978,"sku":"","price":199.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/occ_5d2b4ef9-2fa8-4bb6-8609-3ef5623d31ad.jpg?v=1625874210"},{"product_id":"intake-snow-performance-210-water-meth-injection-kit-standard-controller-2-gallon-tank","title":"Progressive Water Meth Injection Kit 210 (Braided)","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: all forced induction applications (Supercharged\/Turbocharged). Recommended for all street\/strip driven forced induction vehicles using a turbo or centrifugal supercharger (Procharger\/Vortech) looking for cooling over a wide range. Snow Performance Stage 2.5 Boost Cooler, braided line version.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe Snow Performance Stage 2.5 Boost Cooler is a progressive water methanol injection kit with a fully programmable controller gauge. Unlock 50-70 HP on your boosted vehicle while decreasing your air temps by up to 100 degrees, and increase your pump gas octane by 25 points to make more power efficiently with a cooler running motor. Whether running a supercharger, turbo, or high compression motor, the Stage 2.5 Boost Cooler will make the induction charge colder and denser and increase 91 octane fuel to 116 octane race gas levels, allowing full power all the time.\u003c\/p\u003e\n\u003cp\u003eIt is especially helpful for direct injected engines to remove 100% of carbon build up on the valves.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/sno-210-brd_l.jpg?v=1602627959\" alt=\"Snow Performance Stage 2.5 Boost Cooler water-methanol injection kit with tank, pump, VC-50 gauge, stainless braided lines, wiring and fittings\" loading=\"lazy\" width=\"670\" height=\"670\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Stage 2.5 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less water methanol according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water methanol and allows cooling and performance improvements over a wide range for improved drivability.\u003c\/p\u003e\n\u003cp\u003eThe VC-50 (ISO 9001 Manufactured) controller offers the functionality of a boost gauge and water methanol controller all in one. Its bright 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) O-LED screen displays boost, percentage of injection, low level, secondary stage activation, prime button, and system fault codes directly on the screen. You can tailor the controller color to match your OEM gauges or mix and match up to two colors.\u003c\/p\u003e\n\u003cp\u003eThe kit utilizes the only OEM approved water methanol injection pump on the market, with a proprietary heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is designed to be in the elements, with O-Ring connections that are then sealed and potted to ensure no moisture can enter the pump internals. Compare this to pumps that use a pump \"sleeve\": these sleeves keep moisture around the pump unit, leading to corrosion, and trap heat, greatly decreasing pump life.\u003c\/p\u003e\n\u003cp\u003eThe Stage 2.5 comes standard with 100% methanol resistant components using stainless steel, nickel plating, EPDM, and hard anodizing to ensure years of continued use. Tie that in with new Snow Performance ACU-SEAL compression fittings for guaranteed leak free operation even when using 100% methanol.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully Programmable Controller Gauge\u003c\/li\u003e\n\u003cli\u003eU.S.A. Made\u003c\/li\u003e\n\u003cli\u003eAdjustable Progressive Water Methanol Engagement \u0026amp; Monitoring\u003c\/li\u003e\n\u003cli\u003eDigital Boost Reading (1-50 PSI)\u003c\/li\u003e\n\u003cli\u003eRecommended For Street Driven Turbo and Centrifugal Supercharger Applications\u003c\/li\u003e\n\u003cli\u003eSupports 1,000+ HP\u003c\/li\u003e\n\u003cli\u003e100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)\u003c\/li\u003e\n\u003cli\u003eSnow Performance Hyper-Sonic Water Methanol Nozzle\u003c\/li\u003e\n\u003cli\u003eSnow Performance ACU-SEAL Water Methanol Compression Fittings\u003c\/li\u003e\n\u003cli\u003eSnow Performance OEM Approved Extreme Environment 300 PSI UHO Water Methanol Pump\u003c\/li\u003e\n\u003cli\u003eSnow Performance Running \"S\" Engraved Low Profile Nozzle Holder\u003c\/li\u003e\n\u003cli\u003eSnow Performance Running \"S\" Engraved Low Profile High Flow Check Valve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose:\u003c\/strong\u003e Braided. Snow Performance makes this kit with red high-temp nylon tubing or with stainless steel braided line; this listing is the stainless steel braided line version shown in the photo.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eStart and full points on the VC-50 controller are adjustable for engagement and delivery curve to match what the engine requires. Snow Performance notes that the kit is not for trunk mounting as supplied: if you mount it in the trunk, a solenoid and a longer feed line are needed. We recommend installation by a qualified technician. Contact us before ordering if you have questions about your setup.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eSnow Performance gives the original purchaser a 1-year limited warranty against defects in workmanship and material on its water-methanol injection kits and parts, starting from the original purchase date. Proof of purchase is needed, and electrical components are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much power can it add?\u003c\/h3\u003e\n\u003cp\u003eSnow Performance says it can unlock 50-70 HP on your boosted vehicle while decreasing your air temps by up to 100 degrees, and the kit supports 1,000+ HP.\u003c\/p\u003e\n\u003ch3\u003eWhich engines is it for?\u003c\/h3\u003e\n\u003cp\u003eAll forced induction applications (Supercharged\/Turbocharged). It is recommended for street\/strip driven vehicles using a turbo or centrifugal supercharger (Procharger\/Vortech).\u003c\/p\u003e\n\u003ch3\u003eWhat does the VC-50 controller show?\u003c\/h3\u003e\n\u003cp\u003eBoost, percentage of injection, low level, secondary stage activation, prime button, and system fault codes, on a 52mm gauge with a 7 color O-LED screen. It also gives a digital boost reading from 1-50 PSI.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes. The braided line version is in stock.\u003c\/p\u003e","brand":"Snow Performance","offers":[{"title":"Braided","offer_id":37027456712890,"sku":"210-brd","price":1010.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/sno-210-brd_l.jpg?v=1602627959"},{"product_id":"go-fast-bits-t9013-one-mach-2-and-one-respons-tms-for-both-blow-off-and-recirc-advantages-ksg","title":"ONE MACH 2 AND ONE RESPONS TMS FOR BOTH BLOW-OFF AND RECIRC ADVANTAGES KSG","description":"\u003cp\u003e\u003cstrong\u003eSpecial Order from AUS: 1-3 Week Wait after order\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger (KSG) 3.3T-GDI. A kit of one Mach 2 and one Respons TMS. GFB lists this kit for the Kia Stinger 3.3T-GDI 2017-on and the Genesis G70 3.3 T-GDi (2017-2020 and 2020-on).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAll the performance with or without the noise! The GFB kit gives the Kia Stinger one Mach 2 and one Respons TMS for both blow-off and recirc advantages. GFB's instructions say the most common setup is to use the Mach 2 for recirc venting, and the Respons valve for adjusting the venting sound.\u003c\/p\u003e\n\u003cp\u003eIf cars like yours typically suffer issues such as backfiring and stalling when using a fixed-ratio atmosphere-venting BOV, the Respons can help. By adjusting the venting bias to suit the car you can achieve a blow-off sound without having to put up with the issues. Like all GFB valves, the Respons utilises GFB's proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce. Performance and sound without compromise!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9013.jpg?v=1603313432\" alt=\"GFB kit for the Kia Stinger 3.3T: a Respons TMS valve with trumpet beside a Mach 2 recirculating valve\" loading=\"lazy\" width=\"1600\" height=\"979\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eHow GFB's patented venting bias adjustment works: twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed. This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between.\u003c\/p\u003e\n\u003cp\u003eThe Mach 2 handles recirc venting. If you prefer, GFB says it is possible to vent the Mach 2 to atmosphere also, which requires its recirc hose to be removed and plugged.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKit of two valves: one GFB Mach 2 and one GFB Respons TMS\u003c\/li\u003e\n\u003cli\u003ePatented Venting Bias Adjustment system: can be infinitely adjusted between full recirc (silent) and full atmosphere (loud)\u003c\/li\u003e\n\u003cli\u003eChange the venting bias simply by twisting the adjustment ring\u003c\/li\u003e\n\u003cli\u003eTMS Technology for up to 30% faster boost recovery on gearshift\u003c\/li\u003e\n\u003cli\u003eHuge range of direct bolt-on kits\u003c\/li\u003e\n\u003cli\u003e100psi+ boost holding ability\u003c\/li\u003e\n\u003cli\u003eManufactured in Australia in accordance with \u003ca href=\"https:\/\/www.gfbuk.com\/iso-9001.accreditation.cfm\"\u003eISO 9001\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.gfbuk.com\/images\/animated-gif\/Respons-640.gif\" alt=\"Animation of a hand twisting the adjustment ring on a GFB Respons to change the venting bias\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eComplete range of fitment options: the Respons direct fit bolt-on range covers a huge list of popular vehicles, and you can also purchase a variety of hose and flange adaptors for custom fitments. On the Stinger, GFB's instructions: remove the two factory diverter valves (recirc hoses first, then the 8 screws with a 10mm socket, and the two vacuum hoses), install both GFB valves with the supplied screws and 5mm hex key, refit the recirc hoses, and re-use the factory vacuum hoses in the new layout shown in GFB's instructions. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGo Fast Bits gives the original owner a limited lifetime warranty against defective materials or faulty workmanship, once the product is registered on GFB's website. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is in the kit?\u003c\/h3\u003e\n\u003cp\u003eOne GFB Mach 2 and one GFB Respons TMS.\u003c\/p\u003e\n\u003ch3\u003eCan I adjust the sound?\u003c\/h3\u003e\n\u003cp\u003eYes. Twisting the Respons adjustment ring sets its venting anywhere from 100% recirc (silent) to 100% atmosphere (loud). The Mach 2 handles recirc venting; GFB notes it can also be vented to atmosphere if its recirc hose is removed and plugged.\u003c\/p\u003e\n\u003ch3\u003eWill it cause backfiring or stalling?\u003c\/h3\u003e\n\u003cp\u003eGFB says there is no MAF sensor on the Stinger, so the ECU is completely unaffected by atmosphere venting or spring pre-load.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from AUS: 1-3 week wait after order.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"Default Title","offer_id":37129620521146,"sku":"T9013","price":539.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/t9013.jpg?v=1603313432"},{"product_id":"copy-of-go-fast-bits-t9013-one-mach-2-and-one-respons-tms-for-both-blow-off-and-recirc-advantages-ksg","title":"Kia Stinger 3.3TT - Dual Adjustable Blow-off Valve Kit","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger 3.3TT. This is a Respons TMS kit with 2 valves included. GFB lists it for the KIA Stinger 3.3T-GDI 2017-on, and also for the Genesis G70 3.3 T-GDi (2017-2020 and 2020-on).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA dual adjustable blow-off valve kit for the Kia Stinger 3.3TT: two GFB Respons TMS valves, which GFB bills as smarter than a dual port BOV. On the surface, it may look like just another dual-port blow-off valve, but the Respons is actually much more than that. Featuring GFB's patented venting bias adjustment system, the Respons allows you to precisely control how much air vents from each of the two outlets.\u003c\/p\u003e\n\u003cp\u003eWhy is this so important? Two key reasons. First, you can adjust how loud the blow-off sound is: recirculate all of the air for silent factory operation, vent it all to atmosphere for maximum noise, or set it ANYWHERE in between to suit your preference. Second, you get a blow-off sound WITHOUT causing stalling, backfiring, or any other BOV-related issues, even on a car with a sensitive airflow meter (MAF). Hold on, it gets better: the Respons isn't just a noise-maker. It also offers better throttle response, faster boost recovery on gearshift and unlimited boost-holding.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9012_web.jpg?v=1603313813\" alt=\"Pair of GFB Respons TMS blow-off valves for the Kia Stinger 3.3TT kit, each with a trumpet and aluminium recirculation outlet\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow GFB's patented venting bias adjustment works:\u003c\/strong\u003e twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed. This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/gfb.com.au\/wp-content\/uploads\/2018\/11\/tms-respons-diagram.jpg\" alt=\"GFB diagram of the Respons venting bias adjustment: three views of the atmosphere outlet as it is turned from closed to fully open\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoost holding:\u003c\/strong\u003e unlike factory bypass valves, or other brand valves that require different springs for different boost levels, a GFB valve CANNOT be forced open by high boost. The balanced piston design in a GFB valve uses boost pressure on either side to cancel out the forces, so it doesn't matter how much boost you run: you can be sure a Respons valve will deliver all of it to the engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThrottle response and boost recovery:\u003c\/strong\u003e GFB's TMS (Turbo Management System) principle is based on an operating method that is different to all factory bypass valves. A factory bypass valve is open until required to shut; a GFB TMS valve is shut until required to open. This difference in operating methods means that the GFB valve only vents when required, and only enough air to prevent compressor surge. For example, during a gearshift it is possible to preserve a small amount of boost pressure for a short duration. Then, when the throttle is re-opened, peak boost is reached faster than if all pressure is lost (as is the case with the factory valve that remains fully open too long). Using this principle, GFB's tests show that the Respons can return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/gfb.com.au\/wp-content\/uploads\/2018\/11\/tms-respons-chart.jpg\" alt=\"GFB TMS chart of boost against time after a gearshift: the GFB TMS valve returns to peak boost 30% faster than the factory valve\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVenting to atmosphere with an airflow meter:\u003c\/strong\u003e \"I thought venting to atmosphere couldn't be done on a car with an airflow meter, so how does the Respons do it?\" We've all heard the stories and seen people get shot down on forums when they ask about BOVs. Common responses are \"your car will stall, backfire, run rich, go slower, or rip a hole in the space-time continuum that will bring about the end of the universe\". Certainly, if the BOV is not designed or adjusted correctly, at least some of these may be true. When you vent a BOV to atmosphere, you're letting air out of the system that has been measured by the airflow meter, so the ECU will continue to inject fuel for that missing air, hence the issues with over-fuelling that can occur. However, by controlling HOW MUCH the valve vents, WHEN it vents, and for HOW LONG, the Respons can be configured to vent a portion of air to atmosphere at a time and of a volume that least affects the fuelling, to the point where there are no negative side-effects. GFB says that since its competitors do not have a means for adjusting the amount of air that is vented to atmosphere, they are unable to achieve the same success that a Respons does on even the most sensitive engines.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003ePerformance AND sound without compromise:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust the volume of your blow-off sound, from 100% recirc to 100% atmosphere and anywhere in between\u003c\/li\u003e\n\u003cli\u003eUp to 30% faster boost recovery on gearshift, with GFB's TMS principle\u003c\/li\u003e\n\u003cli\u003eGet the blow off sound without the hassles, even on sensitive MAF-based systems\u003c\/li\u003e\n\u003cli\u003eHold unlimited boost pressure: a GFB valve CANNOT be forced open by high boost\u003c\/li\u003e\n\u003cli\u003eBetter throttle response\u003c\/li\u003e\n\u003cli\u003eAvailable in a huge range of universal and direct bolt-on kits; this kit has 2 valves for the Kia Stinger 3.3TT\u003c\/li\u003e\n\u003cli\u003eGFB pioneered the dual port BOV design in 1999, following up with the patented venting bias adjustment system in 2001. This technology is not just a gimmick: it's the key to getting a blow-off sound without the issues (unlike other valves), and is exclusive to GFB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWhen GFB says \"bolt-on\", that's EXACTLY what it means. Everything you need is included, it fits directly in the factory location (not on a separate adaptor), and no modifications to the car are required. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGFB (Go Fast Bits) gives the original owner a limited lifetime warranty against defective materials or faulty workmanship; register the product on GFB's website to activate it. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eAtmosphere venting BOVs won't work on my car. Will this?\u003c\/h3\u003e\n\u003cp\u003eGFB's answer: try a GFB Respons, you'll be surprised. By controlling how much the valve vents, when it vents, and for how long, the Respons can be configured to vent to atmosphere with no negative side-effects, even on a car with a sensitive airflow meter (MAF).\u003c\/p\u003e\n\u003ch3\u003eHow loud is it?\u003c\/h3\u003e\n\u003cp\u003eYou choose: recirculate all of the air for silent factory operation, vent it all to atmosphere for maximum noise, or set it anywhere in between.\u003c\/p\u003e\n\u003ch3\u003eWill it hold boost on a tuned car?\u003c\/h3\u003e\n\u003cp\u003eYes. A GFB valve cannot be forced open by high boost: its balanced piston design uses boost pressure on either side to cancel out the forces.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eYes: FREE SHIPPING.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"Default Title","offer_id":37129678651578,"sku":"GFB-T9012","price":639.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9012_web.jpg?v=1603313813"},{"product_id":"hks-m45il-spark-plugs-ksg","title":"M45IL Kia Stinger GT 3.3TT Spark Plugs","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger GT 3.3T (3.3TT). Sold as a set of six.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA set of six HKS Super Fire Racing M45iL spark plugs for the Kia Stinger 3.3T. We recommend them for tuned cars, including cars running a piggyback.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/50003-M45IL-2.jpg?v=1603314306\" alt=\"HKS Super Fire Racing M45iL iridium spark plug next to its red HKS box\" loading=\"lazy\" width=\"1300\" height=\"730\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe centre electrode is an iridium alloy, which HKS says lowers the voltage needed to fire the plug and improves ignition and durability. The outer electrode is shortened and reshaped with a square platinum chip, made lighter to resist vibration, and a thermal edge on the insulator plus a spark support gap help prevent carbon build-up. It is a long-reach plug in the M45iL heat range.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIridium-alloy centre electrode, which HKS says lowers the voltage needed to fire the plug and improves ignition and durability\u003c\/li\u003e\n\u003cli\u003eSquare platinum chip on a shortened, reshaped outer electrode, made lighter to resist vibration\u003c\/li\u003e\n\u003cli\u003eThermal edge on the insulator and a spark support gap to help prevent carbon build-up\u003c\/li\u003e\n\u003cli\u003eLong-reach type: 14 mm thread, 26.5 mm reach, 16 mm hex\u003c\/li\u003e\n\u003cli\u003eHeat range: M45iL, which HKS lists as equivalent to NGK heat range 9\u003c\/li\u003e\n\u003cli\u003eGapped by us to 0.025 in (about 0.64 mm) before it ships\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet of:\u003c\/strong\u003e 6 is the only value: six plugs, one for each cylinder of the 3.3T V6.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe gap every plug to 0.025 in (about 0.64 mm) before it ships. If you want a different gap, put it in the order notes. In our experience 0.025 in works well on turbocharged Hyundai and Kia engines, even with hybrid turbos.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eHKS gives the original purchaser a 1-year warranty against defects in materials and workmanship. Claims go through the seller with the original purchase order, photos and video. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat gap do you set?\u003c\/h3\u003e\n\u003cp\u003e0.025 in, unless you ask for another gap in the order notes.\u003c\/p\u003e\n\u003ch3\u003eWhich heat range is it?\u003c\/h3\u003e\n\u003cp\u003eThe M45iL. HKS lists it as equivalent to NGK heat range 9.\u003c\/p\u003e\n\u003ch3\u003eWhere can I read HKS's own description?\u003c\/h3\u003e\n\u003cp\u003eOn HKS USA's \u003ca href=\"https:\/\/hksusa.com\/category\/subcategory\/313\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSuper Fire Racing M-series page\u003c\/a\u003e.\u003c\/p\u003e","brand":"HKS","offers":[{"title":"6","offer_id":37129687367866,"sku":"50003","price":279.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/50003-M45IL-2.jpg?v=1603314306"},{"product_id":"ksg","title":"GFB Mach 2 TMS Diverter Valve - Kia Stinger 3.3TT","description":"\u003cp\u003e\u003cstrong\u003eSpecial Order from AUS: 2-3 Week Wait after order\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger 3.3TT (V6 twin turbo). A direct bolt-on Mach 2 kit with two valves, one for each factory bypass valve. GFB lists it for the KIA Stinger 3.3T-GDI 2017-on, and also for the Genesis G70 3.3 T-GDi (2017-2020 and 2020-on).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eThe GFB Mach 2 for the Kia Stinger 3.3TT. GFB calls the Mach 2 the simple and essential mod for 30% quicker boost: it uses proven TMS technology to ensure dependable boost holding and optimum throttle response. If you don't need the patented venting bias adjustment feature of the Respons or Deceptor Pro, the Mach 2 is the answer.\u003c\/p\u003e\n\u003cp\u003eUsing GFB's TMS technology for the Kia Stinger, the Mach 2 can help return the engine to peak boost up to 30% faster than the factory diverter valves during throttle modulation. GFB's range of direct bolt-on blow off valves give YOUR Kia Stinger the sound you want, and the performance to go with it.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9112_web.jpg?v=1603314566\" alt=\"Pair of GFB Mach 2 diverter valves for the Kia Stinger 3.3TT, with aluminium recirculation outlets and brass vacuum barbs\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Mach 2 is configured as a 100% recirculating valve (i.e. bypass, plumb back), and add on kits are also available to convert to 100% atmosphere venting. Use the recirc model for direct factory replacement when you want the performance WITHOUT the noise; add the conversion kit when you want some noise with your performance.\u003c\/p\u003e\n\u003cp\u003eFactory bypass valves have two main shortcomings: one is that they are typically designed to blow open above a certain boost pressure to protect the engine, and the other is that they are not optimised for throttle response. The Mach 2 solves all of these issues. It can effectively hold unlimited boost (unlimited in that no turbo could ever produce enough pressure to damage it), and the TMS technology ensures maximum throttle response.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGFB TMS technology: up to 30% faster return to peak boost than the factory diverter valves during throttle modulation\u003c\/li\u003e\n\u003cli\u003eDependable boost holding: effectively holds unlimited boost\u003c\/li\u003e\n\u003cli\u003eOptimum throttle response\u003c\/li\u003e\n\u003cli\u003eRecirculation model for direct factory replacement, for performance without the noise\u003c\/li\u003e\n\u003cli\u003eAtmosphere venting kits to convert the recirculating valve if you want noise with your performance\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on for the Kia Stinger V6 twin turbo: no additional adaptors, parts or vehicle modifications are required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe Mach 2 kit is a direct bolt-on for the Kia Stinger V6 twin turbo. No additional adaptors, parts or vehicle modifications are required: simply remove the factory bypass valves and replace them with the Mach 2 valves. It's that simple. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003eTo convert the Mach 2 to atmosphere venting, simply purchase two 25mm \u003ca href=\"https:\/\/gfb.com.au\/products\/adaptors\/outlet-adaptors\/25mm-recirc-outlet-detail\/\"\u003ehose plugs\u003c\/a\u003e and leave the outlet open to atmosphere. Optionally, for louder venting sound you can replace the outlets with 2 \u003ca href=\"https:\/\/gfb.com.au\/products\/blow-off-and-diverter-valves\/replacement-parts\/standard-trumpet-detail\/\"\u003estandard trumpets\u003c\/a\u003e or 2 \u003ca href=\"https:\/\/gfb.com.au\/products\/accessories\/whistling-trumpet-detail\/\"\u003ewhistling trumpets\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eGFB (Go Fast Bits) gives the original owner a limited lifetime warranty against defective materials or faulty workmanship; register the product on GFB's website to activate it. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from AUS, with a 2-3 week wait after order.\u003c\/p\u003e\n\u003ch3\u003eIs it loud?\u003c\/h3\u003e\n\u003cp\u003eNot as supplied. The Mach 2 is a 100% recirculating valve, for the performance without the noise. To convert it to atmosphere venting, use two 25mm hose plugs and leave the outlets open to atmosphere; standard or whistling trumpets make the venting sound louder.\u003c\/p\u003e\n\n\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eYes: FREE SHIPPING.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"Default Title","offer_id":37129693987002,"sku":"T9112","price":469.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9112_web.jpg?v=1603314566"},{"product_id":"go-fast-bits-ksg","title":"Hybrid Dual Outlet Valve (3 Valves in one, diverter valve\/ Blow off Valve) 2 VALVES INCLUDED KSG","description":"\u003cp\u003e\u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger (KSG) 3.3T-GDI, 2 valves included. GFB lists this twin valve kit for the Kia Stinger 3.3T-GDI 2017-on and the Genesis G70 3.3 T-GDi (2017-2020 and 2020-on).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eAll the performance with or without the noise! Give your Kia Stinger the sound you want, and the performance to go with it. The GFB Hybrid is a dual outlet valve kit for the Stinger with 2 valves included: 3 valves in one, as a diverter valve or a blow off valve.\u003c\/p\u003e\n\u003cp\u003eWith over 20 years in the business of designing and manufacturing bypass and blow-off valves, GFB have learned a thing or two about managing boosted air, as well as the difference between a good blow-off valve and a great one. Quality and performance are built into all GFB valves, so regardless of which kit you purchase, your investment will last a lifetime (which is why these products are backed by a lifetime warranty) and offer the best possible throttle response and boost holding that any bypass or blow-off valve could deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9212_WEB.jpg?v=1603314920\" alt=\"GFB Hybrid twin valve kit for the Kia Stinger: two Hybrid dual outlet valves with silver outlets and black trumpets\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eEach Hybrid valve has two \"staged\" venting outlets, one for recirc and one for atmosphere. At low valve lifts most of the air is recirculated to keep the noise to a minimum. However, when lifting off the throttle from high boost, the valve opens further and more of the atmosphere venting port is exposed for a louder sound. The kit includes a set of plugs that you can use to configure the Hybrid valves for full recirc, 50\/50, or full atmosphere venting to adjust the volume of your blow off sound.\u003c\/p\u003e\n\u003cp\u003eBecause the Stinger does not use a MAF sensor, you can vent your BOVs to atmosphere without drivability issues such as backfiring or stalling.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 valves included: GFB Hybrid twin valve kit for the Kia Stinger\u003c\/li\u003e\n\u003cli\u003e3 valves in one: diverter valve or blow off valve\u003c\/li\u003e\n\u003cli\u003eTwo staged venting outlets per valve, one for recirc and one for atmosphere\u003c\/li\u003e\n\u003cli\u003ePlug set included: full recirc, 50\/50, or full atmosphere venting\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fit\u003c\/li\u003e\n\u003cli\u003eBest possible throttle response and boost holding\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eDirect bolt-on fit. GFB's instructions: remove the two factory diverter valves (recirc hoses first, then the 8 screws with a 10mm socket, and the two vacuum hoses), install both Hybrid valves with the supplied screws and 5mm hex key, refit the recirc hoses, and re-use the factory vacuum hoses in the new layout shown in GFB's instructions. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eYour investment will last a lifetime, which is why these products are backed by a lifetime warranty. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow many valves are included?\u003c\/h3\u003e\n\u003cp\u003e2 valves, one for each of the Stinger's two factory diverter valve locations.\u003c\/p\u003e\n\u003ch3\u003eWill venting to atmosphere cause backfiring or stalling?\u003c\/h3\u003e\n\u003cp\u003eNo. Because the Stinger does not use a MAF sensor, you can vent your BOVs to atmosphere without drivability issues such as backfiring or stalling.\u003c\/p\u003e\n\u003ch3\u003eWhat other GFB kits are there for the Stinger?\u003c\/h3\u003e\n\u003cp\u003eGFB's direct bolt-on kits for the Stinger offer many different options when it comes to venting sound, from silent to extremely loud, and anywhere in between. Unbeatable quality, direct bolt-on fit, exclusive venting bias adjustment to control the sound, lifetime warranty and a performance benefit: that is what GFB means by Performance Without Compromise.\u003c\/p\u003e\n\u003ch3\u003eIs shipping free?\u003c\/h3\u003e\n\u003cp\u003eYes, FREE SHIPPING.\u003c\/p\u003e","brand":"Go Fast Bits","offers":[{"title":"Default Title","offer_id":37129701556410,"sku":"T9212","price":559.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/T9212_WEB.jpg?v=1603314920"},{"product_id":"copy-of-69-5317ts-k-n-performance-air-intake-system-elantra-n-line-egts-es-vt2-kia-forte-gt","title":"KIA Stinger 3.3TT Intake System","description":"\u003cp\u003e\u003cstrong\u003eItem takes approx. 7 business days to ship\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger 3.3TT (3.3L twin turbo). K\u0026amp;N's dyno chart for this kit was run on a 2018 Kia Stinger 3.3L.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA K\u0026amp;N® 69 Series Typhoon cold air intake system for the Kia Stinger 3.3TT. Gain a guaranteed increase in horsepower and torque with a K\u0026amp;N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media.\u003c\/p\u003e\n\u003cp\u003eIt replaces the factory air filter and intake tube. K\u0026amp;N's estimated horsepower gain for this kit is 9.09 HP @ 5249 RPM.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/69-5318TS_1.jpg?v=1603315573\" alt=\"K\u0026amp;N cold air intake pair for the Kia Stinger 3.3TT: two red conical filters in black heat shields with silver aluminum tubes\" loading=\"lazy\" width=\"1400\" height=\"1400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay. The intake pipe is silver aluminum, the air filter is red cotton gauze with a round outlet, and the kit comes with two couplers and nine stainless steel worm gear clamps. It is engineered to provide high airflow and exceptional filtration.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGuaranteed to increase horsepower and torque\u003c\/li\u003e\n\u003cli\u003eMandrel-bent aluminum intake tube paired with oversized oiled cotton air filter\u003c\/li\u003e\n\u003cli\u003eEngineered to provide high airflow and exceptional filtration\u003c\/li\u003e\n\u003cli\u003eReplaces factory air filter and intake tube\u003c\/li\u003e\n\u003cli\u003eFilter only requires cleaning every 100,000 miles under normal highway driving conditions\u003c\/li\u003e\n\u003cli\u003eTypical installation can be completed in 90 minutes or less with simple hand tools\u003c\/li\u003e\n\u003cli\u003e10-Year\/Million Mile Limited Warranty™\u003c\/li\u003e\n\u003cli\u003eWill not void vehicle warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated Horsepower Gain\u003c\/td\u003e\n\u003ctd\u003e9.09 HP @ 5249 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir Filter Color\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir Filter Material\u003c\/td\u003e\n\u003ctd\u003eCotton Gauze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir Filter Outlet Shape\u003c\/td\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamps Included\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamp Material\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamp Style\u003c\/td\u003e\n\u003ctd\u003eWorm Gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCouplers Included\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Type\u003c\/td\u003e\n\u003ctd\u003eCold-Air Intake System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Style\u003c\/td\u003e\n\u003ctd\u003e69 Series Typhoon Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake Pipe Color \/ Finish\u003c\/td\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake Pipe Material\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStreet Legal In All US States\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.knfilters.ca\/legal_all_states.htm\"\u003eNo\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTUV Approved (Europe)\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e15.4 lb (7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Box Height\u003c\/td\u003e\n\u003ctd\u003e14.5 in (368 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Box Length\u003c\/td\u003e\n\u003ctd\u003e24.1 in (612 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Box Width\u003c\/td\u003e\n\u003ctd\u003e15.5 in (394 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalifornia Restricted\u003c\/td\u003e\n\u003ctd\u003eNot legal for sale or use in California\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Hardware Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1,000,000 Miles\/10 Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/69-5318TS_Alt.jpg?v=1603315573\" alt=\"K\u0026amp;N left and right intake assemblies, showing the silver aluminum tubes, couplers and heat shields\" loading=\"lazy\" width=\"1400\" height=\"1400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTools needed:\u003c\/strong\u003e Wrench, Extension, Flat Blade Screwdriver, Allen Wrench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation time:\u003c\/strong\u003e 60-90 Minutes. Typical installation can be completed in 90 minutes or less with simple hand tools; the entire system can typically be installed in less than 90 minutes. Mounting hardware is included.\u003c\/p\u003e\n\u003cp\u003eK\u0026amp;N documents for this kit: Installation Instruction Sheets and Dyno Chart - 2018 Kia Stinger 3.3L - 9.09HP Increase.\u003c\/p\u003e\n\u003cp\u003eSome intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle: this kit is listed as not legal for sale or use in California.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/69-5318TS_Eng.jpg?v=1603315573\" alt=\"K\u0026amp;N intake installed in a Kia Stinger 3.3 twin turbo engine bay\" loading=\"lazy\" width=\"1400\" height=\"1400\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e10-Year\/Million Mile Limited Warranty™ from K\u0026amp;N (listed in the specifications as 1,000,000 Miles\/10 Year). Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much power does it add?\u003c\/h3\u003e\n\u003cp\u003eK\u0026amp;N's estimated horsepower gain is 9.09 HP @ 5249 RPM; their dyno chart for a 2018 Kia Stinger 3.3L shows a 9.09HP increase. The intake is guaranteed to increase horsepower and torque.\u003c\/p\u003e\n\u003ch3\u003eHow long does installation take?\u003c\/h3\u003e\n\u003cp\u003e60-90 Minutes, using a wrench, extension, flat blade screwdriver and Allen wrench. Mounting hardware is included.\u003c\/p\u003e\n\u003ch3\u003eIs it street legal?\u003c\/h3\u003e\n\u003cp\u003eIt is listed as not street legal in all US states and not legal for sale or use in California, and it is not TUV approved (Europe).\u003c\/p\u003e\n\u003ch3\u003eHow soon will it ship?\u003c\/h3\u003e\n\u003cp\u003eItem takes approx. 7 business days to ship.\u003c\/p\u003e","brand":"K\u0026N Filters","offers":[{"title":"Default Title","offer_id":37129710043322,"sku":"69-5318TS","price":847.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/69-5318TS_1.jpg?v=1603315573"},{"product_id":"mishmoto-performance-intercooler-kit-fits-kia-stinger-gt-3-3t-2018-ksg","title":"Kia Stinger Performance Front Mount IC KIT","description":"\u003cp\u003e\u003cstrong\u003eSpecial Order from Mishimoto: 2-3 week wait\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in Silver and Black!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 2018+ Kia Stinger GT 3.3T and 2018+ Genesis G70 3.3T (engine code Lambda II GDI, chassis code CK). Mishimoto's product page names the 2018-2023 Kia Stinger GT 3.3T as the direct fit, and its compatible-vehicle list also includes the Genesis G70 from the 2019 model year.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eGive your 2018+ Kia Stinger GT some extra cooling power with the Mishimoto Performance Intercooler Kit. Kia's Stinger line-up made quite the splash upon its release and added a much-needed shakeup in the mid-sized sports sedan segment. Even though the Lambda II GDI 3.3T provides one of the best platforms out there today, the intercooling system has the potential to hold the Stinger back.\u003c\/p\u003e\n\u003cp\u003eMishimoto's design replaces the entire intercooling system, from turbo to throttle body, providing an optimized airflow to, from, and through the intercooler. The kit includes the performance intercooler, piping, a cast aluminum merge manifold and couplers for optimal flow and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMINT-STNGR-18SL_1_6.png?v=1603317752\" alt=\"Mishimoto Kia Stinger GT 3.3T performance intercooler kit with the silver intercooler, wrinkle black hot-side and cold-side pipes, merger manifold, black silicone couplers, brackets and clamps\" loading=\"lazy\" width=\"700\" height=\"700\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Mishimoto Performance Intercooler replaces the tube-and-fin core coupled to plastic end tanks with a robust bar-and-plate core, TIG-welded to a pair of cast aluminum end tanks, for vastly improved heat dissipation and flow through the core. The core is also larger, for a 94% increase in core volume and a 74% increase in external fin surface area.\u003c\/p\u003e\n\u003cp\u003eWhile the stock piping was already a durable aluminum construction, its diameter could lend itself to restrictions as the power increases. Mishimoto kept the aluminum but increased the inner diameter to 3\" for increased flow through the system with minimal pressure drop. The piping merger manifold is overhauled too, with the inlets increased to 2\" and the outlet to 3\", for a 51% boost in flow straight out of the turbos, while retaining compatibility with the stock recirculation valves. The piping kit is finished in a sleek micro-wrinkle black powder coat to retain the OEM+ look under the hood and is linked together with Mishimoto's 5-layer silicone couplers.\u003c\/p\u003e\n\u003cp\u003eOn the dyno, the combination of the larger piping diameters and the increased intercooler size equated to a 29°F drop in outlet temperatures with a gain of 8whp and 8wtq on stock tuning. With a stage 1 map tune installed on Mishimoto's test Stinger, it recorded a 41°F drop in outlet temperature with a 6whp and 8wtq gain on top of the tune.\u003c\/p\u003e\n\u003cp\u003eMishimoto documented the development of this kit on its engineering blog:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.mishimoto.com\/engineering\/2020\/04\/kia-stinger-gt-33t-intercooler-kit-dyno-results-2018\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFloat Like a Butterfly, Sting like a, Kia? – Performance Intercooler Kit R\u0026amp;D, Part 7 – Dyno Results\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.mishimoto.com\/engineering\/2020\/04\/kia-stinger-gt-blow-off-valve-adapter-2018\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFloat like a Butterfly, Sting like a Kia? – Performance Intercooler R\u0026amp;D, Part 6 – Blow-Off Valve Adapter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.mishimoto.com\/engineering\/2020\/01\/kia-stinger-gt-intercooler-kit-part-5\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFloat Like a Butterfly, Sting like a Kia? – Performance Intercooler Kit R\u0026amp;D, Part 5 – Piping Production Sample\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for the 2018+ Kia Stinger GT 3.3T\u003c\/li\u003e\n\u003cli\u003eIncludes performance intercooler, piping, cast aluminum merge manifold, and couplers for optimal flow and performance\u003c\/li\u003e\n\u003cli\u003eDrops intercooler outlet temperature by 29°F on stock tune and 41°F on stage 1 tune\u003c\/li\u003e\n\u003cli\u003eMax power gains of 8 whp and 8 wtq on stock tune with an additional 6 whp and 8 wtq on top of stage 1 tuning\u003c\/li\u003e\n\u003cli\u003e94% increase in intercooler core volume\u003c\/li\u003e\n\u003cli\u003e74% increase in external fin surface area\u003c\/li\u003e\n\u003cli\u003e51% increase in flow through piping merger manifold\u003c\/li\u003e\n\u003cli\u003e3\" intercooler piping for increased flow\u003c\/li\u003e\n\u003cli\u003eMethanol injection bung incorporated on the cold-side intercooler pipe (Mishimoto says the bung can be drilled and tapped for methanol injection or sensors)\u003c\/li\u003e\n\u003cli\u003eCompatible with stock recirculation valves\u003c\/li\u003e\n\u003cli\u003eFits with most aftermarket intake kits\u003c\/li\u003e\n\u003cli\u003eIntercooler available in Silver or Black with wrinkle black piping\u003c\/li\u003e\n\u003cli\u003ePipe diameter: pipes 3\"; merger manifold 2\" inlet, 3\" outlet\u003c\/li\u003e\n\u003cli\u003eInlet: 3\"; outlet: 3\"\u003c\/li\u003e\n\u003cli\u003eCore size: 28.7\"x7.9\"x4.5\"\u003c\/li\u003e\n\u003cli\u003eOverall width: 8.1\"; overall height: 7.9\"; overall length: 38.7\"\u003c\/li\u003e\n\u003cli\u003eWeight: 31 lbs.\u003c\/li\u003e\n\u003cli\u003eConstruction: bar-and-plate; coating: powder coated; pipe material: aluminum\u003c\/li\u003e\n\u003cli\u003eEngine code: Lambda II GDI; chassis code: CK\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eIn the kit: (1) performance intercooler, (1) hot-side piping merger manifold, (1) hot-side intercooler pipe, (1) cold-side intercooler pipe, (6) silicone couplers, (2) application-specific mounting brackets, (2) air diverters, (4) mounting grommets, (8) heavy-duty worm gear clamps and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMINT-STNGR-18BK_1_6.png?v=1603317753\" alt=\"Mishimoto Kia Stinger GT intercooler kit with the black intercooler option, shown with its wrinkle black pipes, merger manifold, couplers, brackets and clamps\" loading=\"lazy\" width=\"700\" height=\"700\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver or Black, the colour of the intercooler; the piping is wrinkle black on both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe kit replaces the entire intercooling system, from turbo to throttle body. It is compatible with the stock recirculation valves and fits with most aftermarket intake kits. Mishimoto notes that installation of this kit requires permanent modification to the front air guide shrouding. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/300-MMINT-STNGR-18K_1_6.png?v=1603317753\" alt=\"Mishimoto silver performance intercooler installed behind the front bumper of a blue Kia Stinger GT on a lift\" loading=\"lazy\" width=\"700\" height=\"700\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eMishimoto Lifetime Warranty. Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.\u003c\/p\u003e\n\u003cp\u003eFor Mishimoto's complete warranty policy, please click \u003ca href=\"https:\/\/www.mishimoto.com\/contact\/\" target=\"_blank\"\u003ehere\u003c\/a\u003e. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich colours are available?\u003c\/h3\u003e\n\u003cp\u003eSilver or Black. That is the colour of the intercooler; the piping is wrinkle black either way.\u003c\/p\u003e\n\u003ch3\u003eHow much power does it add?\u003c\/h3\u003e\n\u003cp\u003eOn Mishimoto's dyno: 8 whp and 8 wtq on the stock tune, plus 6 whp and 8 wtq on top of stage 1 tuning. Intercooler outlet temperature dropped 29°F on the stock tune and 41°F on a stage 1 tune.\u003c\/p\u003e\n\u003ch3\u003eCan I keep my stock recirculation valves?\u003c\/h3\u003e\n\u003cp\u003eYes. The kit is compatible with the stock recirculation valves.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from Mishimoto, with a 2-3 week wait.\u003c\/p\u003e","brand":"Mishmoto","offers":[{"title":"Silver","offer_id":37129732686010,"sku":"MMINT-STNGR-18","price":2399.99,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":37129732718778,"sku":"MMINT-STNGR-18","price":2399.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMINT-STNGR-18SL_1_6.png?v=1603317752"},{"product_id":"mishmoto-mmbcc-stngr-18pbe-pvc-oil-cc-direct-fit-ksg","title":"Kia Stinger PVC Oil CC Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eSpecial order from Mishimoto: 2-3 week wait\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Direct fit for the 2018+ Kia Stinger GT (3.3L twin-turbocharged V6). Mishimoto now lists this kit as a direct fit for the 2018-2021 Kia Stinger GT, and a separate kit for the 2022+ Stinger GT, so confirm your model year with us before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eKia came out of nowhere to stake their claim in the luxury sedan market segment. With the intuitive automatic transmission coupled to the 3.3L twin-turbocharged V6, it's no wonder the likes of standard benchmarks are worried. Direct injection combined with the high-compression of turbocharging means a hotbed for carbon buildup, and the Mishimoto 2018+ Kia Stinger GT Direct-Fit Catch Can Kit is there to keep your Stinger running to its full potential.\u003c\/p\u003e\n\u003cp\u003eMishimoto's catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, they are not heated, so all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while these catch cans trap the blow-by and keep it out of the engine permanently. In Mishimoto's words: if you've seen what we've seen in the bottom of our catch cans, you won't want that draining back into your oil either.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMBCC-STNGR-18PBE_2_6.png?v=1603318704\" alt=\"Mishimoto black oil catch can on its application-specific mounting bracket for the Kia Stinger GT\" loading=\"lazy\" width=\"800\" height=\"800\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMounted with a robust, application-specific bracket, Mishimoto's patent pending compact 2-port catch can is installed in line with the factory PCV system in order to separate fuel vapors and oil droplets from the relieving crankcase pressure. As an extra layer of defense, the catch can also includes a 50-micron bronze filter designed for capturing any rogue blow-by particles. The can is billet 6061 aluminum sealed with Viton™ O-rings, and an internal air diverter increases air turbulence to improve oil separation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for the 2018+ Kia Stinger GT\u003c\/li\u003e\n\u003cli\u003eSingle can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter\u003c\/li\u003e\n\u003cli\u003eHelps reduce carbon buildup on intake valves\u003c\/li\u003e\n\u003cli\u003ePatented (US D884,760 S) billet 6061 aluminum can sealed with Viton™ O-rings\u003c\/li\u003e\n\u003cli\u003eInstalls in under 30 minutes\u003c\/li\u003e\n\u003cli\u003eRobust, application-specific bracket mounts the can in a serviceable location\u003c\/li\u003e\n\u003cli\u003eIncludes pre-molded hoses for simplified installation\u003c\/li\u003e\n\u003cli\u003eDefends intake system and essential components from oil blow-by\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can\u003c\/li\u003e\n\u003cli\u003eCatch can has a 2 oz. capacity for longer servicing intervals (Mishimoto's current figure)\u003c\/li\u003e\n\u003cli\u003eInternal air diverter increases air turbulence to improve oil separation\u003c\/li\u003e\n\u003cli\u003eHelps maintain proper octane levels to reduce potential detonation\u003c\/li\u003e\n\u003cli\u003eFilter and can are fully serviceable\u003c\/li\u003e\n\u003cli\u003eFits with Mishimoto Petcock Drain Kit\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eIn the kit: (1) compact baffled oil catch can, (1) application-specific mounting bracket, (2) direct-fit hoses, (1) 3\/8\" aluminium barbed fitting, (1) 1\/2\" aluminium barbed fitting, (4) worm gear clamps and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMBCC-STNGR-18PBE_1_6.png?v=1603318706\" alt=\"Mishimoto Kia Stinger catch can kit contents: black catch can, mounting bracket, two hoses, barbed fittings and four worm gear clamps\" loading=\"lazy\" width=\"800\" height=\"792\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eInstallation is a breeze with the pre-molded hoses, keeping the time you spend under the hood to less than 30 minutes. The robust, application-specific bracket mounts the can in a serviceable location, and the filter and can are fully serviceable. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/300-MMBCC-STNGR-18PBE-1_6.png?v=1603318706\" alt=\"Mishimoto catch can installed in the engine bay of a blue Kia Stinger GT\" loading=\"lazy\" width=\"700\" height=\"700\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eMishimoto Lifetime Warranty. Like all of Mishimoto's products, the Mishimoto 2018+ Kia Stinger GT Direct-Fit Catch Can Kit is covered under the Mishimoto Lifetime Warranty to protect your investment on more than one level. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich Stinger does it fit?\u003c\/h3\u003e\n\u003cp\u003eIt is a direct fit for the 2018+ Kia Stinger GT. Mishimoto now lists this kit for the 2018-2021 Stinger GT and a separate kit for the 2022+ Stinger GT, so confirm your model year with us before ordering.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to install?\u003c\/h3\u003e\n\u003cp\u003eUnder 30 minutes, with the pre-molded hoses.\u003c\/p\u003e\n\u003ch3\u003eHow is it different from an air-oil separator?\u003c\/h3\u003e\n\u003cp\u003eMishimoto's catch cans are not heated, so all of the blow-by condenses in the can, and they trap it and keep it out of the engine permanently instead of draining it back into the oil pan.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from Mishimoto, with a 2-3 week wait.\u003c\/p\u003e","brand":"Mishmoto","offers":[{"title":"Default Title","offer_id":37129736421562,"sku":"","price":299.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/MMBCC-STNGR-18PBE_2_6.png?v=1603318704"},{"product_id":"dragy-gps-acceleration-test-ksg","title":"Global Positioning System Performance Monitoring","description":"\u003cp\u003e\u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: any car. Buy one, use it in all your cars and your friends' cars! Requires an iOS (8.0) or Android (4.4) device and the free Dragy app.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eDragy is a GPS performance meter that gives you official reports. Monitor your 0-60mph, 60-130mph, 100-200kmh, 1\/4 mile, 1\/2 mile performance, and more!\u003c\/p\u003e\n\u003cp\u003eDragy uses high speed GPS satellites to accurately measure your vehicle's performance within 1\/100th of a second, producing identical results to the much more expensive and cumbersome VBOX system, in a less expensive and easier to use package. The Dragy software automatically charts slope on all timeslips, which you can then post to forums or social media, share with friends, or even upload to the Dragy leader board.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dragy_26a21d02-fee2-415c-a70d-059050d551f6.png?v=1603319855\" alt=\"Dragy GPS performance box, a compact black unit with a light strip\" loading=\"lazy\" width=\"543\" height=\"337\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Dragy box is extremely compact at 1\" x 3\" (25.4mm x 76.2mm). It can be set on the dash when testing and stored in the glove box or center console when not in use. It connects to your phone over Bluetooth 4.0, supports GPS and GLONASS, and its battery lasts up to 10 hours.\u003c\/p\u003e\n\u003cp\u003eRuns are saved in both metric and SAE formats, allowing comparisons of 100-200kmh and all metric equivalents. You can also define your own performance windows for measuring both trap speeds and\/or elapsed times, time to brake performance such as 100-0, and much more. The system can be run simultaneously with JB4 Mobile and other bluetooth apps. It requires the Dragy app, which is available free of charge for both iOS and Android.\u003c\/p\u003e\n\u003cp\u003eIn addition, there are many advanced features under development, including superimposing performance data over your mobile camera, virtual races with friends, an internal feed for photos and performance discussion, and more to come.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure acceleration (0-100kmh, 100-200kmh, 1\/4 mile and more)\u003c\/li\u003e\n\u003cli\u003eMeasuring braking time (100-0kmh, 200-0kmh and much more)\u003c\/li\u003e\n\u003cli\u003eLap Time (available soon)\u003c\/li\u003e\n\u003cli\u003eG-force measurement\u003c\/li\u003e\n\u003cli\u003eHighscore list sorted by manufacturer\u003c\/li\u003e\n\u003cli\u003eVideo Drag and Drop\u003c\/li\u003e\n\u003cli\u003eProfile (garage, profile picture and much more)\u003c\/li\u003e\n\u003cli\u003eOfficial reports, with slope charted automatically on all timeslips\u003c\/li\u003e\n\u003cli\u003eRuns saved in both metric and SAE formats\u003c\/li\u003e\n\u003cli\u003eRuns simultaneously with JB4 Mobile and other bluetooth apps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTechnical data:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eiOS (8.0) or Android (4.4) device required\u003c\/li\u003e\n\u003cli\u003eMetric unit system (km \/ h) supported\u003c\/li\u003e\n\u003cli\u003eConnection type: Bluetooth 4.0\u003c\/li\u003e\n\u003cli\u003eSupports GPS and GLONASS\u003c\/li\u003e\n\u003cli\u003eBattery life: up to 10 hours\u003c\/li\u003e\n\u003cli\u003eDimensions: 30 x 80 x 15mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBox contents: Dragy Performance Box Lap and Accelerometer, USB charging cable, 2x metal plates and 3M adhesive strip, and the manual.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dragy1_d86939e5-f09d-4170-b8c4-ffd1670caab3.jpg?v=1603319855\" alt=\"Dragy GPS performance box lit up on a carbon fibre dashboard\" loading=\"lazy\" width=\"568\" height=\"411\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eInstall the free Dragy app on your iOS (8.0) or Android (4.4) device and connect over Bluetooth. Set the box on the dash when testing, and store it in the glove box or center console when not in use. Buy one and use it in all your cars and your friends' cars.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dragy2_8b41884f-a588-4b31-81c6-67ff2d0d1332.jpg?v=1603319855\" alt=\"Dragy app screens: leaderboard, performance report and Dragy feed\" loading=\"lazy\" width=\"599\" height=\"321\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eDragy gives a one-year warranty from the purchase date against defects in material or workmanship under normal use, and replaces defective units or parts at no charge. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I use it in more than one car?\u003c\/h3\u003e\n\u003cp\u003eYes. Buy one, and use it in all your cars and your friends' cars.\u003c\/p\u003e\n\u003ch3\u003eWhat do I need to use it?\u003c\/h3\u003e\n\u003cp\u003eAn iOS (8.0) or Android (4.4) device and the Dragy app, which is free for both iOS and Android.\u003c\/p\u003e\n\u003ch3\u003eCan I run it at the same time as my JB4?\u003c\/h3\u003e\n\u003cp\u003eYes. It can be run simultaneously with JB4 Mobile and other bluetooth apps.\u003c\/p\u003e\n\u003ch3\u003eHow accurate is it?\u003c\/h3\u003e\n\u003cp\u003eDragy uses high speed GPS satellites to measure your vehicle's performance within 1\/100th of a second, producing identical results to the much more expensive VBOX system.\u003c\/p\u003e","brand":"Dragy","offers":[{"title":"Default Title","offer_id":37129746022586,"sku":"DRAGY-1","price":209.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/dragy_26a21d02-fee2-415c-a70d-059050d551f6.png?v=1603319855"},{"product_id":"eibach-pro-kit-lowering-coil","title":"Kia Stinger GT PRO-KIT Spring Set","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 2018 to 2020 Kia Stinger GT 3.3L AWD. Eibach now lists this kit for the 2018-2023 Kia Stinger GT 3.3L AWD and RWD, and the 2022-2026 Genesis G70 3.3T RWD. Eibach PRO-KIT, a set of 4 springs.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eEibach PRO-KIT Performance Springs for the Kia Stinger GT 3.3L. On the 2018 to 2020 Stinger GT 3.3L AWD they lower the car 1.4 in at the front and 1.2 in at the rear. The Pro-Kit gives high performance handling and aggressive good looks, with a lower center of gravity and a progressive spring design for excellent ride quality.\u003c\/p\u003e\n\u003cp\u003eEibach products are created to meet the extreme requirements of racing, from the 245-mph Mulsanne straight of Le Mans to the fender-to-fender combat of the Daytona Motor Speedway. The chassis of a production vehicle is designed to be built at a minimum cost, and suited for an \"average driver\". We enthusiasts, however, are anything but average. We know what we want from a vehicle: immediate response, reduced body roll, increased stability and enhanced cornering ability, and the look that comes with those characteristics, a lower, more muscular, more athletic stance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/M404402.jpg?v=1603320252\" alt=\"Eibach PRO-KIT lowering springs for the Kia Stinger GT, set of 4 dark grey springs\" loading=\"lazy\" width=\"700\" height=\"466\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe special skills of Eibach engineers are in the tuning of the individual components (springs, dampers and stabilizers) to achieve the best possible harmony between the driver, the automobile and the road. As a driver you immediately feel more direct handling and greater predictability. Nose dive under braking is reduced, as well as excessive body roll in hard cornering, and in any performance driving situation, tracking stability and driver confidence are greatly enhanced.\u003c\/p\u003e\n\u003cp\u003eEibach production technology is recognized worldwide as leading its field, from its high-strength spring-steel alloys and advanced CNC winding process to its high-quality corrosion protection and the legendary longevity of its components. The entire process, from initial development to final shipping, is subject to an extensive Quality Management System certified to the ISO 9001:2008 international quality standard, and Eibach operates to its own, often more rigid, specifications. When you see the Eibach logo on a part, you can be sure that it is of the highest possible quality.\u003c\/p\u003e\n\u003cp\u003eEibach springs have supported innumerable race and championship winners over the last two decades. In series as different as Formula 1 and NASCAR, the winning factor is often chassis setup and tuning: when everybody has comparable power, the driver who wins is the one who can put that power to the ground and maintain momentum through the corners. Eibach's partners include AMG, Audi, BMW, Ferrari, Ford, Honda, Lamborghini, Lola, MazdaSpeed, Mitsubishi, Nissan, Subaru, Porsche, Renault F-1, Toyota and many more.\u003c\/p\u003e\n\u003cp\u003eWhether in F1, NASCAR, WRC, CART or Indy Car, Eibach regards motor sports as the ideal proving ground. The experience it gains at the highest levels of racing goes directly into the development of the highest-grade chassis components on the planet, and the enthusiasm created by the challenges of motor sports drives it to ever-higher performance: performance you will enjoy every time you pull out of the pits, or your own garage.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2018 to 2020 Kia Stinger GT 3.3L AWD: 1.4 in front, 1.2 in rear\u003c\/li\u003e\n\u003cli\u003eEibach's figures for the 2018-2023 Stinger GT 3.3L RWD: 0.8 in front, 0.8 in rear\u003c\/li\u003e\n\u003cli\u003eEibach's figures for the 2022-2026 Genesis G70 3.3T RWD: 0.8 in front, 0.6 in rear\u003c\/li\u003e\n\u003cli\u003eHigh Performance Handling and Aggressive Good Looks\u003c\/li\u003e\n\u003cli\u003eLower Center of Gravity\u003c\/li\u003e\n\u003cli\u003eStop Quicker, Corner Faster and get Better MPG!\u003c\/li\u003e\n\u003cli\u003eProgressive Spring Design for Excellent Ride Quality\u003c\/li\u003e\n\u003cli\u003eSet of 4 springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eEibach tested this kit with factory dampers, and it does not guarantee fitment, height or warranties on unlisted applications. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eEibach gives a 5-year limited warranty against factory defects in material and workmanship on its Pro-Kit springs. It covers the original purchaser with proof of purchase who still owns the vehicle; the springs must be installed by a qualified, licensed mechanic, and racing use, misuse and overloading are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much does it lower a Stinger GT?\u003c\/h3\u003e\n\u003cp\u003eOn the 2018 to 2020 Stinger GT 3.3L AWD, 1.4 in at the front and 1.2 in at the rear. Eibach gives 0.8 in front and rear for the RWD car.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the RWD Stinger?\u003c\/h3\u003e\n\u003cp\u003eEibach lists this kit for the 2018-2023 Stinger GT 3.3L in both AWD and RWD.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eYes, it is listed as IN STOCK.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":37129751560378,"sku":"E10-46-035-01-22","price":564.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/M404402.jpg?v=1603320252"},{"product_id":"hybrid-air-coilover-lift-air-bag-system","title":"Coilover Lift Air Bag System (Aircup Style)","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMADE IN CANADA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Cars on coilovers: the HybridAIR lift installs on top of your coilover in place of your original spring hat. Air management system included.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eLowered your car on coilovers so low you cannot get over speedbumps? THIS IS YOUR SOLUTION! HybridAIR air suspension bags are placed between the spring and mount. Hit a button, the car lifts and holds that ride height, and yes, you can drive on the bags lifted. The best part? Add some air to the bags while driving for a smoother ride than a stock suspension.\u003c\/p\u003e\n\u003cp\u003eHave a favorite set of coilovers on your car, but wish you had the ride height adjustability of an air suspension setup? Look no further. The kit is better and more robust than aircups, and made to drive lifted on air.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/hybridair-coilover-assist-installed-1_1_orig.jpg?v=1603323930\" alt=\"HybridAIR coilover lifts installed on a pair of coilovers, between the spring and the top mount\" loading=\"lazy\" width=\"1100\" height=\"688\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe Coilover Lift Kit installs on top of your coilover in place of your original spring hat, without adding any stack height. That's right: the lifts add ZERO height to your coilover when they're deflated. Airing up the HybridAIR lifts will allow you to achieve an extra 2\"-5\" of ride height. Unlike 'air cup' style lifts, you can drive with pressure in the system as much as you like, taking advantage of the adjustability whenever you need it.\u003c\/p\u003e\n\u003cp\u003eThe air management system is included: tank, pump, solenoids, distribution block and switch. It has a 14\"x14\" footprint, about the size of a 2.5 gal meth tank, so the kit takes up as much trunk space as a WMI kit.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMade in Canada\u003c\/li\u003e\n\u003cli\u003eAdds zero additional height to your coilover at 0 psi\u003c\/li\u003e\n\u003cli\u003eDrive low at your normal coilover spring rate\u003c\/li\u003e\n\u003cli\u003eAdjust ride height while driving\u003c\/li\u003e\n\u003cli\u003eDrive with air in the system or completely aired out\u003c\/li\u003e\n\u003cli\u003e2\"-5\" max. lift (depending on suspension geometry)\u003c\/li\u003e\n\u003cli\u003eRetain your original coilovers\u003c\/li\u003e\n\u003cli\u003eAir management system included: tank, pump, solenoids, distribution block and switch, with a 14\"x14\" footprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/imgl9392_4_orig.jpg?v=1603323930\" alt=\"Two HybridAIR coilover lift units with their spacer rings\" loading=\"lazy\" width=\"1100\" height=\"733\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe lifts install on top of your coilovers in place of the original spring hats, and the air management system takes up about as much trunk space as a WMI kit (a 14\"x14\" footprint). We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/20230811-220626.heic?v=1697273419\" alt=\"HybridAIR Hideaway air management tank, compressor and valves installed in a hatchback trunk beside a subwoofer\" loading=\"lazy\" width=\"4000\" height=\"3000\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I drive with the car lifted?\u003c\/h3\u003e\n\u003cp\u003eYes. Unlike air cup style lifts, you can drive with pressure in the system as much as you like, and adding some air while driving gives a smoother ride than a stock suspension.\u003c\/p\u003e\n\u003ch3\u003eWill it raise my car when it is aired out?\u003c\/h3\u003e\n\u003cp\u003eNo. The lifts add zero additional height to your coilover at 0 psi, so you drive low at your normal coilover spring rate.\u003c\/p\u003e\n\u003ch3\u003eHow much lift does it give?\u003c\/h3\u003e\n\u003cp\u003eAn extra 2\"-5\" of ride height, depending on suspension geometry.\u003c\/p\u003e\n\u003ch3\u003eHow much trunk space does it take?\u003c\/h3\u003e\n\u003cp\u003eAbout as much as a WMI kit: the air management system has a 14\"x14\" footprint, about the size of a 2.5 gal meth tank.\u003c\/p\u003e","brand":"Hybrid Air","offers":[{"title":"Default Title","offer_id":37129831481530,"sku":"AIRLIFT 6774","price":1899.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/hybridair-coilover-assist-installed-1_1_orig.jpg?v=1603323930"},{"product_id":"plastic-pry-tar-tool","title":"Clip Removal Tool and 4 Plastic Pry Bar Tool","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an add-on item, meant to go with another N75 Motorsports order: add it when you are buying a part or an intake you plan to install.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal. We offer this set for interior and exterior panel and trim work on Hyundai and Kia cars, which use these clips throughout the car.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWe offer this trim and clip removal set for interior and exterior panel work on Hyundai and Kia cars: one clip removal tool with a forked tip plus four plastic pry bars, five pieces in total. It makes installing parts like our EBCS or an intake easier.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/CollageMaker_20201107_225927421.jpg?v=1604808034\" alt=\"Four orange plastic trim pry bars beside a black forked clip removal tool with a blue handle\" loading=\"lazy\" width=\"4096\" height=\"4096\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe clip removal tool has a forked tip for popping out push-pin clips. The four plastic pry bars come in different shapes for prying and lifting panels and trim.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne clip removal tool with a forked tip for popping out push-pin clips\u003c\/li\u003e\n\u003cli\u003eFour plastic pry bars in different shapes for prying and lifting panels and trim\u003c\/li\u003e\n\u003cli\u003eFive pieces in total\u003c\/li\u003e\n\u003cli\u003eHandy for clips, bumper and fender liner removal, interior and dashboard trim, and intake installation and removal\u003c\/li\u003e\n\u003cli\u003eUseful because Hyundai and Kia use these clips throughout the car\u003c\/li\u003e\n\u003cli\u003eA convenient add-on when installing N75 parts like the EBCS or an intake\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/271960949261422624.jpg?v=1604808034\" alt=\"Forked clip removal tool popping out a plastic push-pin fastener, with close-ups of the fork gripping the clip\" loading=\"lazy\" width=\"960\" height=\"960\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eUse the forked tip of the clip removal tool to pop out push-pin clips, and the plastic pry bars to pry and lift panels and trim: bumpers and fender liners, interior and dashboard trim, and the parts around an intake you are installing or removing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/12437086471072999176.jpg?v=1604808035\" alt=\"Orange plastic pry bar, and a pry bar lifting an interior dashboard trim strip below an air vent\" loading=\"lazy\" width=\"960\" height=\"960\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is in the set?\u003c\/h3\u003e\n\u003cp\u003eOne clip removal tool and four plastic pry bars, five pieces.\u003c\/p\u003e\n\u003ch3\u003eWhat can I use it for?\u003c\/h3\u003e\n\u003cp\u003ePopping trim clips, removing bumpers and fender liners, interior and dashboard trim, and installing or removing an intake or a part like the EBCS, on Hyundai and Kia cars.\u003c\/p\u003e\n\u003ch3\u003eIs it an add-on item?\u003c\/h3\u003e\n\u003cp\u003eYes. It is meant to go with another N75 Motorsports order: add it when you are buying a part or an intake you plan to install.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"Default Title","offer_id":37275442512058,"sku":"","price":14.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/CollageMaker_20201107_225927421.jpg?v=1604808034"},{"product_id":"n75-race-valve-bov-solenoid-valve-replacement-kit-pierburg","title":"N75 Race Valve BOV Solenoid Valve Upgrade Kit (Pierburg)","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai and Kia 1.6T and 2.0T turbo engines that use this BOV control solenoid: the 2.0T N cars (Veloster N, Elantra N, Kona N) and the 1.6T cars (Veloster Turbo 2, Forte GT, Kona, Elantra GT). Choose by engine in the Setup option.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA complete blow-off valve (BOV) solenoid upgrade kit that replaces your factory BOV control solenoid with our Signature Series Race Valve, a Pierburg valve made in Germany. It includes the valve, a wiring-harness conversion and the hoses needed to fit it, with no separate parts to source; the 1.6T version also adds a mounting bracket. It does not require ECU tuning.\u003c\/p\u003e\n\u003cp\u003eThe kit is developed in Canada and the USA and made in Canada. We have sold and run this valve for five years, with the only failures being units defective out of the box. It comes with black hoses. Design patent pending.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Screenshot_20210918-190736_Facebook_1024x1024_7955c2d5-cc10-455b-93dd-0109b502cce6.jpg?v=1633067700\" alt=\"N75 Motorsports BOV solenoid valve, the Pierburg Signature Series Race Valve used in this upgrade kit\" loading=\"lazy\" width=\"1000\" height=\"842\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eWe use the same Pierburg valve here and in our \u003ca href=\"https:\/\/n75motorsports.ca\/products\/n75-race-valve\"\u003eEBCS wastegate solenoid upgrade\u003c\/a\u003e, and we have not changed it. It has bigger ports and a bigger valve body for more airflow, responds more quickly to ECU inputs, and stays closed until the ECU commands it to open.\u003c\/p\u003e\n\u003cp\u003eWe have tested the kit for 36 months across 3 vehicles in 2 countries and 250,000 km with no issues, and we see less \"rapid fire\" from the BOV. Even our project Veloster N had a BOV solenoid fail on the dyno and was limited to 8 psi until this kit was fitted. We recommend it before tuning or running more boost.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete kit: valve, harness, hoses and zip ties, plus a mounting bracket on the 1.6T version\u003c\/li\u003e\n\u003cli\u003ePierburg Signature Series Race Valve, made in Germany\u003c\/li\u003e\n\u003cli\u003eBigger ports and a bigger valve body for more airflow\u003c\/li\u003e\n\u003cli\u003eMore responsive to ECU inputs; stays closed until commanded\u003c\/li\u003e\n\u003cli\u003eDoes not require ECU tuning\u003c\/li\u003e\n\u003cli\u003eTested for 36 months across 3 vehicles in 2 countries and 250,000 km with no issues\u003c\/li\u003e\n\u003cli\u003eDeveloped in Canada and the USA, made in Canada\u003c\/li\u003e\n\u003cli\u003eComes with black hoses\u003c\/li\u003e\n\u003cli\u003eDesign patent pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/20201103_165144.jpg?v=1633067700\" alt=\"Pierburg race valve mounted on its bracket in the engine bay, with its Pierburg part label visible and a hose connected\" loading=\"lazy\" width=\"2268\" height=\"4032\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetup:\u003c\/strong\u003e With bracket for 1.6T engine: the Pierburg valve on a bracket, a wiring-harness conversion, two sections of vacuum hose (to the BOV and the cold pipe) and zip ties. Without bracket for 1.6T\/2.0T (\"N\" Vehicles): the valve, a wiring harness, hoses, and zip ties for the valve and the hoses. Without bracket for 2.0T (\"N\" Vehicles) engine with aftermarket FMIC (Longer Hoses): the same kit with longer hoses to clear an aftermarket front-mount intercooler. The N-vehicle and aftermarket-FMIC kits differ only in hose length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eTrim the hoses to length.\u003c\/li\u003e\n\u003cli\u003eMount the valve and tie it down with the zip ties.\u003c\/li\u003e\n\u003cli\u003eConnect the hoses (one to the cold pipe, one to the intake, and the BOV port to the BOV) and plug in the harness.\u003c\/li\u003e\n\u003cli\u003eDrive.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOwners report an easy install and a good fit, with no fault codes after fitting and smoother boost, tighter throttle response and no hesitation. The labelled photo below shows where each hose connects.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/intake.jpg?v=1633067700\" alt=\"N75 Race Valve BOV solenoid with its three ports labelled Coldpipe, Intake and BOV to show where each hose connects\" loading=\"lazy\" width=\"1762\" height=\"1211\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eContact us with your order number if you have any problem with your part.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow do I know my BOV solenoid is failing?\u003c\/h3\u003e\n\u003cp\u003eA failing factory BOV control solenoid usually causes a check-engine light, specifically fault code P2261, the BOV opening when you're on throttle, or the BOV pulsating.\u003c\/p\u003e\n\u003ch3\u003eDo I need an ECU tune to run this?\u003c\/h3\u003e\n\u003cp\u003eNo. It does not require tuning; we recommend fitting it if you plan to tune or run more boost.\u003c\/p\u003e\n\u003ch3\u003eWhich option do I choose?\u003c\/h3\u003e\n\u003cp\u003eFor 1.6T engines, the with-bracket kit. For the 2.0T N cars, a without-bracket kit; choose the aftermarket-FMIC version if you run an aftermarket front-mount intercooler.\u003c\/p\u003e\n\u003ch3\u003eWill it help a check-engine light or a BOV that opens on throttle?\u003c\/h3\u003e\n\u003cp\u003eA failing BOV solenoid is the usual cause of P2261 and those symptoms, and this kit replaces it. We have also seen it help some cars with a BOV opening under full load, though we do not advertise it as a cure; if it helps, that is a bonus.\u003c\/p\u003e","brand":"N75 MotorSports","offers":[{"title":"With bracket for 1.6T engine","offer_id":37385722167482,"sku":"12-322","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"Without bracket for 1.6T\/2.0T (\"N\" Vehicles)","offer_id":39544042062010,"sku":"12-321","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"Without bracket for 2.0T (\"N\" Vehicles) engine with aftermarket FMIC (Longer Hoses)","offer_id":40976071065786,"sku":"12-322","price":227.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/Screenshot_20210918-190736_Facebook_1024x1024_7955c2d5-cc10-455b-93dd-0109b502cce6.jpg?v=1633067700"},{"product_id":"whiteline-front-suspension-sway-bar-link-adjustable","title":"Whiteline Front Heavy Duty Adjustable Sway Bar Link - Hyundai \/ Kia","description":"\u003cp\u003e\u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Front of the Hyundai Elantra GT Sport, Hyundai Elantra GT N Line, Hyundai Elantra Sport, Hyundai Veloster Turbo 2, Kia Forte GT, Kia Forte5 and Hyundai Kona. Whiteline sells it as a universal adjustable sway bar link that fits by dimension (12mm ball stud, 290-315mm overall length).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline front heavy duty adjustable anti-roll bar drop links. Type: link kit, sway bar (adjustable), front.\u003c\/p\u003e\n\u003cp\u003eNot many enthusiasts are aware that OE and, more importantly, aftermarket anti-roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable anti-roll bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating anti-roll bar preload on installation but most importantly ensuring the maximum output of the anti-roll bar for improved grip and better handling.\u003c\/p\u003e\n\u003cp\u003e#gripactivated #Project22\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KLC180-295_1024x1024_2x_28d7634f-3873-4d7c-b788-c32a1bd73b64.jpg?v=1606078198\" alt=\"Pair of Whiteline heavy duty adjustable sway bar links with gold anodized bodies, ball joint ends and washers\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eWhiteline adjustable sway bar links are designed to increase sway bar effectiveness and improve overall performance. By eliminating the flex and compliance associated with original equipment, these high strength links provide increased rigidity and responsiveness, which can be felt especially during lane changes and initial turn in.\u003c\/p\u003e\n\u003cp\u003eThe links are manufactured from high quality alloy and include heavy duty steel ball joint ends, ensuring maximum strength and durability. The light weight alloy bodies are anodized in Whiteline Gold colour, providing a long-lasting protective barrier to corrosion and wear.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront heavy duty adjustable sway bar (anti-roll bar) drop links\u003c\/li\u003e\n\u003cli\u003eIncreased rigidity and responsiveness, felt especially during lane changes and initial turn in\u003c\/li\u003e\n\u003cli\u003eHigh quality alloy bodies, anodized in Whiteline Gold colour\u003c\/li\u003e\n\u003cli\u003eHeavy duty steel ball joint ends\u003c\/li\u003e\n\u003cli\u003eOn-car length adjustment of up to 25mm centre to centre: eliminate sway bar pre-load or fine tune to your liking\u003c\/li\u003e\n\u003cli\u003eHeavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance\u003c\/li\u003e\n\u003cli\u003e12mm ball stud, 290-315mm overall length, 2 links per kit (Whiteline figures)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KLC180-295-2_1024x1024_2x_ba1c7ff9-b97c-4d87-a3ef-db439e3cd131.jpg?v=1606078201\" alt=\"Whiteline adjustable sway bar links, side view\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe links adjust in length on the car, so you can set them to eliminate sway bar pre-load on installation. Whiteline quotes 1 hour to install. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KLC180-295-3_1024x1024_2x_49a30b35-2332-4a9f-9dd1-b9d93f21d64c.jpg?v=1606078201\" alt=\"Whiteline heavy duty adjustable sway bar links with nuts and washers\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWhiteline covers its sway bar links for 3 years or 60,000 km (36,000 miles), whichever comes first, against manufacturing defects in material and workmanship, for the original vehicle they are installed on. Damage from competition, motorsport or off-road use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe front of the Hyundai Elantra GT Sport, Elantra GT N Line, Elantra Sport, Veloster Turbo 2 and Kona, and the Kia Forte GT and Forte5.\u003c\/p\u003e\n\u003ch3\u003eHow much adjustment is there?\u003c\/h3\u003e\n\u003cp\u003eUp to 25mm centre to centre, adjusted on the car.\u003c\/p\u003e\n\u003ch3\u003eWhy fit adjustable links?\u003c\/h3\u003e\n\u003cp\u003eWorn or inadequate drop links can hinder anti-roll bar effectiveness. Adjustable links let you eliminate anti-roll bar preload on installation and get the maximum output from the bar, for improved grip and better handling.\u003c\/p\u003e\n\u003ch3\u003eHow many links come in the kit?\u003c\/h3\u003e\n\u003cp\u003eTwo. Whiteline lists 2 links per kit.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":37600822329530,"sku":"KLC180-295","price":265.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KLC180-295_1024x1024_2x_28d7634f-3873-4d7c-b788-c32a1bd73b64.jpg?v=1606078198"},{"product_id":"whiteline-front-low-control-arm-ball-joint","title":"Performance Lower Ball Joints","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eES\/EGTS\/VT2\/N Line and hardware kit: these vehicles require the hardware kit for these ball joints to work. This is a Whiteline hardware kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT Sport, Hyundai Elantra GT N Line, Hyundai Elantra Sport, Hyundai Veloster Turbo 2, Kia Forte GT, Kia Forte5, Hyundai Kona N and Hyundai Elantra N. The front roll center\/bump steer correction kit (Elantra GT\/ Veloster\/ I30N) also works with the Kona Iron Man Edition and the Elantra Sport. Whiteline lists this kit for the Hyundai Veloster N on its US site and for the Hyundai i30 N PD Hatch and Fast Back on its Australian site.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline performance lower ball joints: the Whiteline roll centre and bump steer correction kit. A must for lowered vehicles, it is designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact, ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to its potential.\u003c\/p\u003e\n\u003cp\u003eOur kits are slightly more expensive than the competition, but we include Whiteline hardware to get the job done; no universal washers used here. #gripactivated\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/whiteline.jpg?v=1606232020\" alt=\"Pair of Whiteline roll centre correction lower ball joints with gold washers and split pins\" loading=\"lazy\" width=\"1280\" height=\"912\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eN75 Motorsports recommends: Whiteline ball joints are required for any lowered vehicle, due to the following.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is roll centre, and how does ride height affect it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhiteline's motto is \"Activate More Grip\", and its philosophy is to achieve the maximum amount of usable grip on offer. There are many ways to increase the overall grip available on your car; here the focus is on how to avoid a classic mistake with MacPherson strut suspension and low ride height that can often result in loss of grip.\u003c\/p\u003e\n\u003cp\u003eMany cars in the tuning world run coilover suspension, for example the Whiteline Max-G coilovers, for the benefits they give such as adjustable ride height and damping. Whilst it's very satisfying buying tuning parts such as \u003ca href=\"https:\/\/www.whiteline.com.au\/vehicle_swaybars.php\"\u003eanti-roll bars\u003c\/a\u003e or \u003ca href=\"https:\/\/www.whiteline.com.au\/vehicle_alignment.php\"\u003eanti-lift kits\u003c\/a\u003e, sometimes the best result can come from a simple setup change. General wisdom suggests that once you've fitted your coilovers you'll be setting the ride height at a low level to reduce the centre of gravity. Reducing the centre of gravity will theoretically increase the maximum cornering speed of the vehicle, however this is not always the case. And in the case of lowering springs, most performance lowering spring kits that are well developed will take into account a number of factors, one of which is the roll centre location, another of course being ideal spring rate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSo what is important about roll centre and ride height?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe roll centre is a virtual point at which the chassis interacts with the centre of gravity to create weight transfer and roll. This is particularly important with MacPherson strut suspension, because MacPherson strut suspension doesn't have an upper arm; the geometrical equivalent of the upper arm is the top mount. This means the typical roll centre location of a well-designed MacPherson strut suspension is just above ground level. The majority of chassis engineers will seek a roll centre fairly low to ground level, but slightly above it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"The problem occurs when you lower the MacPherson strut suspension too far.\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith a double A-arm or double wishbone suspension, where unequal length arms are used, a chassis designer is able to engineer favourable geometry and camber change throughout the functional range of the suspension travel. Unfortunately, on MacPherson strut suspension the engineer doesn't have this luxury, and the camber change and roll centre change on a MacPherson strut at very high lateral loads can often result in the loss of grip. So what does this have to do with the ride height?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"Eventually the car will 'fall over' onto the outside front wheel.\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs you lower your coilover equipped car with MacPherson suspension, the lower control arm will eventually start to point upwards at the outboard end, referencing ground level. What this does in reality is drop the roll centre below ground. The impact this has dynamically, though, is far greater than a static drawing would show.\u003c\/p\u003e\n\u003cp\u003eWith the roll centre below ground height, more weight is transferred via the springs (likewise, raising the roll centre reduces weight transfer through the springs and increases weight transfer through sprung mass). This makes body roll more pronounced and in turn increases the leverage against the lower roll centre, making the instantaneous centre move well outside the vehicle, causing even more weight transfer and roll. Eventually the car will \"fall over\" onto the outside front wheel. The tires' limits of grip will now have been breached, and no more weight transfer can occur. To the driver this is a very frustrating feeling: quite often on a front wheel drive car the rear inside wheel will now be airborne, and the car just understeers relentlessly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"One solution is to ensure that the strut works in a fairly defined range.\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere are numerous ways to address this problem, but here are some common fixes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea) Keep the lowering to an optimal level to ensure the ball joint pivot point is not above the centreline from the inboard mounting point.\u003c\/li\u003e\n\u003cli\u003eb) If you are building a race car, you can move the inboard mounting points upwards or fabricate a ball joint extender.\u003c\/li\u003e\n\u003cli\u003ec) Use lowering springs instead of coilovers, where the optimal lowering range is achieved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn summary, if you want extremely lowered MacPherson strut cars, then you must attend to the subsequent geometry problems or risk driving a car with so much understeer it will only be a matter of time before it meets a hedge.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront roll centre and bump steer correction kit: specially engineered ball joints that correct roll-centre geometry\u003c\/li\u003e\n\u003cli\u003eA must for lowered vehicles\u003c\/li\u003e\n\u003cli\u003eRaises the front roll-centre: a substantial increase to front roll resistance\u003c\/li\u003e\n\u003cli\u003eSignificant reduction in suspension compression on the outside front tyre during cornering\u003c\/li\u003e\n\u003cli\u003eMore even weight distribution and improved tyre contact\u003c\/li\u003e\n\u003cli\u003eImproves front end grip, cornering speeds and tyre life\u003c\/li\u003e\n\u003cli\u003eWhiteline hardware included: no universal washers used here\u003c\/li\u003e\n\u003cli\u003e2 ball joints per kit (Whiteline)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/whiteline1.jpg?v=1606232020\" alt=\"Whiteline performance lower ball joints with yellow boots, gold washers and split pins\" loading=\"lazy\" width=\"1280\" height=\"912\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e N Line\/ES\/VT2\/Forte\/EGTS. Sold as the Whiteline ball joints with the Whiteline hardware kit (1 gold ring). These vehicles require the Whiteline hardware kit for these ball joints to work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eES\/EGTS\/VT2\/N Line need the Whiteline hardware kit for these ball joints to work, and we include it. Whiteline quotes 2 hours to install and says a front wheel alignment is required afterwards. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWhiteline covers its ball joints for 3 years or 60,000 km (36,000 miles), whichever comes first, against manufacturing defects in material and workmanship, for the original vehicle they are installed on. Damage from competition, motorsport or off-road use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDo I need these if my car is lowered?\u003c\/h3\u003e\n\u003cp\u003eN75 Motorsports recommends Whiteline ball joints for any lowered vehicle. Lowering a MacPherson strut car too far drops the roll centre below ground and the car can understeer relentlessly; these ball joints raise the front roll-centre.\u003c\/p\u003e\n\u003ch3\u003eDo I need the hardware kit?\u003c\/h3\u003e\n\u003cp\u003eOn the ES, EGTS, VT2 and N Line, yes: these vehicles require the hardware kit for these ball joints to work. It is a Whiteline hardware kit, and our kit includes Whiteline hardware, with no universal washers.\u003c\/p\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai Elantra GT Sport, Elantra GT N Line, Elantra Sport, Veloster Turbo 2, Kona N and Elantra N, and the Kia Forte GT and Forte5. The kit also works with the Kona Iron Man Edition.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment?\u003c\/h3\u003e\n\u003cp\u003eYes. Whiteline says a front wheel alignment is required after fitting.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"N Line\/ES\/VT2\/Forte\/EGTS","offer_id":37907176980666,"sku":"KCA485 - KCA405 (1 GOLD RING)","price":359.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/whiteline.jpg?v=1606232020"},{"product_id":"whiteline-rear-suspension-sway-bar-link-adjustable","title":"Rear Control Arm - Toe Adjustable","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra GT Sport, Hyundai Elantra Sport, Hyundai Elantra GT N Line, Hyundai Veloster Turbo 2, Kia Forte GT, Kia Forte5 and Hyundai Veloster N.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWhiteline's heavy duty adjustable rear lower front control arm kit, designed to allow for increased range of toe adjustment. Replacing control arms with control arms which are not only adjustable but much stronger increases handling abilities on the track, and that translates to the road. Whiteline Toe Arm bushings are nearly 100 bucks alone, and these come with them!\u003c\/p\u003e\n\u003cp\u003eUsed by us on our development Veloster N to increase handling with a stronger arm and stiffer bushings, not to mention the adjustability. We were able to correct OEM alignment which was off from factory.\u003c\/p\u003e\n\u003cp\u003eWhiteline suspension components will transform the way your car drives. With every Whiteline suspension product added, the handling of the car gets better and better. If you are a track user, Whiteline suspension components should be on the top of your mod list!\u003c\/p\u003e\n\u003cp\u003e#Project22 #gripactivated\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KTA281_1024x1024_2x_401bf93d-fe62-443f-b29d-be57283bc43a.jpg?v=1606267955\" alt=\"Pair of Whiteline gold toe adjustable rear lower control arms with bushings and two washers\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eLow compliance bushings are used to minimise NVH and maximise longevity. A left-right-hand thread adjustment turn-buckle allows for easy on-car adjustment of toe. Whiteline sells the kit as a pair: 2 arms and 2 washers.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eToe adjustment: increased range of toe adjustment\u003c\/li\u003e\n\u003cli\u003eHeavy duty adjustable arms, much stronger than the arms they replace\u003c\/li\u003e\n\u003cli\u003eLow compliance bushings minimise NVH and maximise longevity\u003c\/li\u003e\n\u003cli\u003eLeft-right-hand thread turn-buckle for easy on-car adjustment\u003c\/li\u003e\n\u003cli\u003eWhiteline toe arm bushings included (nearly 100 bucks alone)\u003c\/li\u003e\n\u003cli\u003ePair: 2 arms and 2 washers (Whiteline)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_iQ8D0lFVkd.png?v=1640471213\" alt=\"Whiteline diagram of the rear suspension showing the toe arm position\" loading=\"lazy\" width=\"656\" height=\"422\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWhiteline quotes 1 hour to install and recommends a rear wheel alignment afterwards. On our development Veloster N, the adjustment let us correct OEM alignment which was off from factory. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWhiteline gives a lifetime warranty against manufacturing defects in material and workmanship, valid for the original vehicle the part is installed on. Damage from competition, motorsport or off-road use, normal wear and incorrect installation are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does it adjust?\u003c\/h3\u003e\n\u003cp\u003eToe. The arms give an increased range of toe adjustment, set on the car with the turn-buckle.\u003c\/p\u003e\n\u003ch3\u003eAre the bushings included?\u003c\/h3\u003e\n\u003cp\u003eYes. The Whiteline toe arm bushings come with the arms, and they are nearly 100 bucks alone.\u003c\/p\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai Elantra GT Sport, Elantra Sport, Elantra GT N Line, Veloster Turbo 2 and Veloster N, and the Kia Forte GT and Forte5.\u003c\/p\u003e\n\u003ch3\u003eDo I need a wheel alignment?\u003c\/h3\u003e\n\u003cp\u003eWhiteline recommends a rear wheel alignment after fitting.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":37630254809274,"sku":"KTA281","price":395.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/KTA281_1024x1024_2x_401bf93d-fe62-443f-b29d-be57283bc43a.jpg?v=1606267955"},{"product_id":"whiteline-grip-series-kit-rear-links-sway-bar-lowering-springs","title":"Grip Series Kit ES\/EGTS\/Forte\/VT2\/N-Line\/VN","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai Elantra Sport (ES), Elantra GT Sport (EGTS), Elantra GT N Line (N-Line), Veloster Turbo 2 (VT2) and Veloster N (VN), and the Kia Forte. Whiteline USA lists this kit for the Hyundai Veloster N and Elantra GT 2017+.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA Whiteline Grip Series kit: Whiteline performance lowering springs and Whiteline adjustable sway bar drop links in one package. Whiteline lists the kit as its springs, a 22mm 2-point adjustable rear sway bar and rear sway bar links, with the bushings, saddles, lateral locks, spacers and washers to fit them.\u003c\/p\u003e\n\u003cp\u003e#gripactivated #project22\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/GS1-HYU001_1024x1024_2x_696fae7c-8618-4abe-9f64-0d1b7e6d97ee.jpg?v=1606358820\" alt=\"Whiteline Grip Series kit: four lowering springs, rear sway bar with bushings and saddles, two adjustable sway bar links, lateral locks and spacers\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe springs are manufactured in Europe from the highest quality material. They are progressive rate springs, also known as variable rate: they keep the initial spring rate low for a smooth ride, then increase the rate progressively as the spring compresses for improved performance, so they improve performance without compromising ride quality characteristics. They are cold rolled, engineered for superior fit and performance with OEM shocks, and produced to the finest tolerances to ensure exact fitment.\u003c\/p\u003e\n\u003cp\u003eWhiteline adjustable sway bar links are designed to increase sway bar effectiveness and improve overall performance. By eliminating the flex and compliance associated with original equipment, these high strength links provide increased rigidity and responsiveness, which can be felt especially during lane changes and initial turn in. They are manufactured from high quality alloy and include heavy duty steel ball joint ends for maximum strength and durability. The light weight alloy bodies are anodized in Whiteline Gold colour, a long-lasting protective barrier to corrosion and wear.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWhiteline Grip Series kit: lowering springs plus adjustable sway bar drop links\u003c\/li\u003e\n\u003cli\u003eSprings manufactured in Europe from the highest quality material\u003c\/li\u003e\n\u003cli\u003eProgressive (variable) rate springs: low initial rate for a smooth ride, rising as the spring compresses for improved performance\u003c\/li\u003e\n\u003cli\u003ePrecision and cold rolled: engineered for superior fit and performance with OEM shocks, produced to the finest tolerances for exact fitment\u003c\/li\u003e\n\u003cli\u003eAdjustable sway bar links: high quality alloy bodies anodized in Whiteline Gold, with heavy duty steel ball joint ends\u003c\/li\u003e\n\u003cli\u003eOn-car link length adjustment of up to 25mm centre to centre: eliminate sway bar pre-load or fine tune to your liking\u003c\/li\u003e\n\u003cli\u003eHeavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance\u003c\/li\u003e\n\u003cli\u003eKit contents listed by Whiteline: 4 springs, 1 sway bar, 2 links, 2 bushings, 2 saddles, 2 lateral locks, 4 spacers and 4 washers\u003c\/li\u003e\n\u003cli\u003eLowers the car 25 mm (1 in) front and rear (Whiteline figure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/GS1-HYU001-2_1024x1024_2x_34790667-af17-4148-a545-39109b952440.jpg?v=1606358820\" alt=\"Whiteline Grip Series kit parts laid out: lowering springs, sway bar, adjustable links and mounting hardware\" loading=\"lazy\" width=\"801\" height=\"573\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe sway bar links adjust in length on the car, so you can set them to eliminate sway bar pre-load. Whiteline says a front and rear wheel alignment is required after fitting the kit. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWhiteline covers its springs and links, including the springs and sway bar links in this kit, for 3 years or 60,000 km (36,000 miles), whichever comes first, and its other products with a lifetime warranty, against manufacturing defects in material and workmanship for the original vehicle they are installed on. Damage from competition, motorsport or off-road use is not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai Elantra Sport, Elantra GT Sport, Elantra GT N Line, Veloster Turbo 2 and Veloster N, and the Kia Forte. Whiteline USA lists the kit for the Hyundai Veloster N and Elantra GT 2017+.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the kit?\u003c\/h3\u003e\n\u003cp\u003eWhiteline lists 4 springs, 1 sway bar (a 22mm 2-point adjustable rear bar), 2 links, 2 bushings, 2 saddles, 2 lateral locks, 4 spacers and 4 washers.\u003c\/p\u003e\n\u003ch3\u003eWill the springs make the ride harsh?\u003c\/h3\u003e\n\u003cp\u003eThey are progressive rate springs: the initial rate is kept low for a smooth ride and increases as the spring compresses for improved performance.\u003c\/p\u003e\n\u003ch3\u003eHow much do the sway bar links adjust?\u003c\/h3\u003e\n\u003cp\u003eUp to 25mm centre to centre, adjusted on the car.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":37642633806010,"sku":"GS1-HYU001","price":725.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/GS1-HYU001_1024x1024_2x_696fae7c-8618-4abe-9f64-0d1b7e6d97ee.jpg?v=1606358820"},{"product_id":"wagner-cooling-fmic-upgrade-2018-ksg","title":"Kia Stinger GT 3.3TT Wagner Tuning FMIC Upgrade","description":"\u003cp\u003e\u003cstrong\u003eSpecial Order From Wagner: 2-3 Week wait\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHIS ITEM CAN ONLY BE USED IN A COMPETITION RACING VEHICLE THAT IS NOT DRIVEN ON PUBLIC ROADS, UNDER CALIFORNIA STATE LAW IT IS NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger GT 3.3T-Gdi AWD RWD (US-model), the 3.3TT. Wagner's current page lists this kit for the Kia Stinger GT 3.3T-Gdi AWD (US).\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eWagner Tuning's COMPETITION INTERCOOLER KIT for the Kia Stinger GT 3.3T-Gdi, a new release in the 2nd quarter of 2019. The WAGNERTUNING high-performance intercooler has a new competition core (Tube Fin) developed especially for the requirements of the Kia Stinger GT, with a 175% larger frontal surface and 183% more core volume than the stock intercooler. Wagner says this makes the kit perfect for racing use: an optimal cooling effect of the charged air with a significant increase in performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wgt-200001142_gp_xl.jpg?v=1606425726\" alt=\"Wagner Tuning competition intercooler for the Kia Stinger GT 3.3TT, angled view of the stepped tube fin core and cast end tank\" loading=\"lazy\" width=\"1500\" height=\"1500\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eThe competition core is a stepped design measuring 600 mm x 445(315) mm x 105(60) mm (23.6Inch x 17.5(12.4)Inch x 4.1(2.4)Inch). The aluminum cast endtanks were designed in CAD and optimized in CFD simulations for an ideal internal airflow, and an incorporated air baffle inside the intercooler inlet ensures a uniform filling of the intercooler. The result is excellent cooling with a minimal back pressure. The newly developed competition core is very light, and a specially prepared air baffle lets enough air flow through to the adjoining components, for example the watercooler.\u003c\/p\u003e\n\u003cp\u003eAn anti-corrosion powder coating with perfect heat-conducting properties protects the WAGNERTUNING intercooler from all environmental influences, so a lasting and optimal cooling effect can be guaranteed. Wagner says all its products are subject to a continuous quality monitoring.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompetition core (Tube Fin), stepped design: 600 mm x 445(315) mm x 105(60) mm \/ 23.6Inch x 17.5(12.4)Inch x 4.1(2.4)Inch\u003c\/li\u003e\n\u003cli\u003e175% larger frontal surface and 183% more core volume than the stock intercooler\u003c\/li\u003e\n\u003cli\u003eInlet diameter: Ø76 mm\/3 Inch; outlet diameter: Ø76 mm\/3 Inch\u003c\/li\u003e\n\u003cli\u003eThis intercooler kit is optionally available with a Ø76mm (3 Inch) charge pipe\u003c\/li\u003e\n\u003cli\u003eDimensions stock intercooler: V = 8.75 L \/ 534 Inch³; A = 972 cm²\u003c\/li\u003e\n\u003cli\u003eDimensions WAGNERTUNING intercooler: V = 24.8 L \/ 1513.4 Inch³; A = 2670 cm²\u003c\/li\u003e\n\u003cli\u003eAluminum cast endtanks, designed in CAD and optimized in CFD simulations\u003c\/li\u003e\n\u003cli\u003eAir baffle inside the intercooler inlet for a uniform filling\u003c\/li\u003e\n\u003cli\u003eAnti-corrosion powder coating with heat-conducting properties\u003c\/li\u003e\n\u003cli\u003ePlug and play: replaces the original intercooler\u003c\/li\u003e\n\u003cli\u003eKit comes with: 1 intercooler, 1 air baffle, 1 Ø3 Inch charge pipe (optional), 2 silicone hoses (black), 1 mounting material, 1 installation instruction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/200001142USA_700x_a4708e3d-2c75-426e-8f27-8ebce1df8f31.jpg?v=1606437294\" alt=\"Wagner Tuning Kia Stinger GT intercooler kit: intercooler, two black silicone hoses, air baffle, two mounting brackets and four hose clamps\" loading=\"lazy\" width=\"700\" height=\"700\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001142-Temp.jpg\" alt=\"Wagner Tuning temperature comparison chart for the Kia Stinger GT: intake air temperature with the stock and Wagner intercoolers on a Stage 1 test car\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001142-Flow.jpg\" alt=\"Wagner Tuning pressure drop chart for the Kia Stinger GT: mass flow against back pressure for the stock intercooler and the Wagner intercooler\" loading=\"lazy\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Silver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThe installation is done by replacing the original intercooler and is easy to perform (plug and play). Wagner's installation instruction: Installation Instruction Intercooler Kit incl. Charge Pipe (1.69 MB). This item can only be used in a competition racing vehicle that is not driven on public roads. We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wgt-200001142_nx_xl.jpg?v=1606425726\" alt=\"Close-up into the inlet of the Wagner Tuning Stinger intercooler, showing the air baffle across the inlet and the tube fin core\" loading=\"lazy\" width=\"1500\" height=\"1500\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWagner Tuning covers its intercoolers against material and manufacturing defects for 48 months from the original invoice date, once the intercooler is registered with Wagner using its serial number. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I use it on public roads?\u003c\/h3\u003e\n\u003cp\u003eThis item can only be used in a competition racing vehicle that is not driven on public roads; under California state law it is not legal for use in any other motor vehicle.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the charge pipe?\u003c\/h3\u003e\n\u003cp\u003eThe charge pipe is optional: this intercooler kit is optionally available with a Ø76mm (3 Inch) charge pipe.\u003c\/p\u003e\n\u003ch3\u003eHow much bigger is it than stock?\u003c\/h3\u003e\n\u003cp\u003eIt has a 175% larger frontal surface and 183% more core volume: V = 24.8 L against 8.75 L for the stock intercooler.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from Wagner with a 2-3 week wait.\u003c\/p\u003e","brand":"Wagner","offers":[{"title":"Silver","offer_id":37647503294650,"sku":"WAG200001142","price":1699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/wgt-200001142_gp_xl.jpg?v=1606425726"},{"product_id":"ebc-red-stuff-brake-pads-kia-stinger-gt-ksg","title":"Kia Stinger GT 3.3TT Red Stuff Front Brake Pads","description":"\u003cp\u003e\u003cstrong\u003eSpecial order from EBC: 2-3 Weeks wait\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger GT 3.3TT with the Brembo brake package, front axle.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eEBC Redstuff front brake pads for the Kia Stinger GT with the Brembo brake package. In our opinion, the best street brake pad available.\u003c\/p\u003e\n\u003cp\u003eLow dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. Want to drive for weeks with clean wheels? Get EBC Redstuff brake pads!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/EC_12adc483-331f-4d14-8862-f80ebab28582.jpg?v=1606430083\" alt=\"EBC Redstuff brake pad with red backing plate and Brake-In surface coating, with the EBC Brakes logo\" loading=\"lazy\" width=\"300\" height=\"300\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eEBC Redstuff brake pads have proven to be a great performance upgrade pad for their combination of improved bite, higher heat range and very-low dust output. The aramid fiber and ceramic material combo is the minimum dusting brake pad material, with no metallic fibers, which allows simple sponge washing of the wheels.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic pad with aramid fiber; no metallic fibers\u003c\/li\u003e\n\u003cli\u003eReduces dust emitted by OEM pads by approx 80 percent\u003c\/li\u003e\n\u003cli\u003eImproved bite\u003c\/li\u003e\n\u003cli\u003eHigher heat range\u003c\/li\u003e\n\u003cli\u003eVery-low dust output: simple sponge washing of the wheels\u003c\/li\u003e\n\u003cli\u003eFor fast street use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/redstuff-features_1_2773fb59-9186-4299-8580-b959970462a4.jpg?v=1606430083\" alt=\"EBC Redstuff performance chart rating cold bite, average friction, fade resistance, low noise, low dust, wear life and control\" loading=\"lazy\" width=\"600\" height=\"600\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eThese are the front pads for the Kia Stinger GT with the Brembo brake package. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/ebc-redstuff-brake-pads_1_1285f115-bc16-4a9f-bb54-aec3cf14334b.jpg?v=1606430083\" alt=\"EBC Redstuff Ceramic brake pads with red backing plates\" loading=\"lazy\" width=\"600\" height=\"600\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eEBC warrants its brake pads against defects in materials or workmanship for twelve months from purchase or 10,000 miles of highway use; brake noise, normal wear, and use in racing, track days or a taxi or hire car are not covered. EBC asks for proof of purchase showing the purchase date and the mileage at fitting. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my Stinger?\u003c\/h3\u003e\n\u003cp\u003eThey are the front pads for the Kia Stinger GT 3.3TT with the Brembo brake package.\u003c\/p\u003e\n\u003ch3\u003eHow long does it take to arrive?\u003c\/h3\u003e\n\u003cp\u003eIt is a special order from EBC, with a 2-3 week wait.\u003c\/p\u003e\n\u003ch3\u003eDo they make much dust?\u003c\/h3\u003e\n\u003cp\u003eNo. Redstuff is a low dust pad: EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":37647745384634,"sku":"DP32356C","price":289.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/EC_12adc483-331f-4d14-8862-f80ebab28582.jpg?v=1606430083"},{"product_id":"race-gas-ultra-octane-booster","title":"ULTRA Race Fuel Concentrate Dyno Tested","description":"\u003cp\u003e\u003cstrong\u003eALWAYS IN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Universal: any gasoline-powered engine. Unleaded formula, specifically designed for the requirements of very high compression, boosted or nitrous engines.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eRACE-GAS ULTRA Race Fuel Concentrate makes up to 112 Octane fuel out of pump gas. When blended to the proper ratio, it transforms ordinary pump gasoline into high octane, high energy, track grade racing fuel, so you never run out of racing fuel. Don't be fooled by an \"octane boost\" that raises octane by a few points: you want to raise it by whole numbers.\u003c\/p\u003e\n\u003cp\u003eExtremely powerful product: in our opinion, it is the only product you can spend under $100 on and actually notice a significant difference in power. This additive will take 91 Octane and turn it into over 110 Octane race gas without issue, perfect for track days. It is great for new cars which dealerships will fill up on 87: add a little of this and you will be beyond 94 Octane, or add the full can and turn your fuel into race gas (100+ Octane). This is a product we fully stand behind; the results this product creates are extraordinary.\u003c\/p\u003e\n\u003cp\u003eNo high octane fuel around where you live? Want to run a high octane fuel Tune\/Piggyback Map? This is your answer: small enough to keep in your trunk, strong enough to turn pump fuel into over 100 Octane fuel with no problem. This will bring your engine alive: no matter which motor or car you own, it will run far better. It is not a gimmick; it works well and is great for people running high boost levels, and your car will come alive with this and a tune.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/161162001224811617_Race-Gas-Ultra_32oz.jpg?v=1606436421\" alt=\"Race Gas Ultra race fuel concentrate, 32 fl. oz. can, unleaded formula\" loading=\"lazy\" width=\"1280\" height=\"1280\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eRACE-GAS ULTRA is high-performance fuel, designed by racers. It comes from Motorsports Fuel and Equipment, the makers of RACE-GAS Race Fuel Concentrate, and it is a much different formula from original RACE-GAS. In Dan Muldowney's words: \"In testing we found the requirements of very high compression engines were different than engines with lower compression or lower boost. We needed to create a formula that could achieve the high octane while still meeting our requirements of high chemical energy and high chemical oxygen in a consistent and predictable way. We chose to use the highest quality pharmaceutical grade chemicals and to avoid using alcohols or naphthalene which don't meet our design standards.\"\u003c\/p\u003e\n\u003cp\u003eMixed with pump gasoline, ULTRA creates racing fuel with octane between 108 and 112 R+M\/2. Like the original product, it increases the octane, chemical oxygen and chemical energy of the fuel to equal commercially distilled racing fuel.\u003c\/p\u003e\n\u003cp\u003eTested performance: \"When we did our engine dyno testing we did 'like for like' testing against commercial racing fuel. We first did a series of 'pulls' with commercial racing fuel. We then drained the fuel and fuel rail and added RACE-GAS ULTRA blended with pump gas. We then repeated the test. We did not change the engine set up or tune during testing,\" said Dan. \"We found that we were able to create the same horse power and torque as commercial racing fuel and that the fuel performed consistently under different conditions.\"\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMakes up to 112 Octane fuel out of pump gas: 108 to 112 R+M\/2 when mixed with pump gasoline\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for very high compression, boosted or nitrous engines\u003c\/li\u003e\n\u003cli\u003eRaises octane by whole numbers, not by a few points\u003c\/li\u003e\n\u003cli\u003eIncreases the octane, chemical oxygen and chemical energy of the fuel to equal commercially distilled racing fuel\u003c\/li\u003e\n\u003cli\u003eUnleaded formula\u003c\/li\u003e\n\u003cli\u003eHighest quality pharmaceutical grade chemicals; no alcohols or naphthalene\u003c\/li\u003e\n\u003cli\u003eLaboratory tested and race proven to perform in any gasoline-powered engine\u003c\/li\u003e\n\u003cli\u003eDyno tested and proven to work: search YouTube for Race Gas Ultra. See the dyno testing charts against race fuel (110 Octane).\u003c\/li\u003e\n\u003cli\u003eThe makers have burned RACE GAS in everything from a 944 Turbo race car, a modified Audi TT, a Hemi Magnum, a Hemi Challenger and a modified VW R32 to a Corvette and many other cars. All showed increases in power, throttle response and torque; you can see the dyno test results of many of these cars on the test results page at \u003ca href=\"http:\/\/www.race-gas.com\/\"\u003ewww.race-gas.com\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSmall enough to keep in your trunk\u003c\/li\u003e\n\u003cli\u003eGreat for dyno days, track days, or when bad fuel is in your area: if you notice your car is pulling ignition time, this will cure it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_1LytaAnu55.png?v=1614847926\" alt=\"Race Gas dyno chart from TPIS: 13.5 compression big block on 116 octane race fuel vs 87 octane plus Race Gas concentrate\" loading=\"lazy\" width=\"1092\" height=\"823\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eBlend it with pump gasoline to the proper ratio. Race Gas gives these blends:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Can RACE-GAS ULTRA + 4 gallons of 89 = 4 gallons of 108 Octane R+M\/2\u003c\/li\u003e\n\u003cli\u003e1 Can RACE-GAS ULTRA + 4 gallons of 91 = 4 gallons of 110 Octane R+M\/2\u003c\/li\u003e\n\u003cli\u003e1 Can RACE-GAS ULTRA + 4 gallons of 93 = 4 gallons of 112 Octane R+M\/2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeep a small can in your trunk and add it whenever you wish. Visit \u003ca href=\"http:\/\/race-gas.com\/\" title=\"Race-Gas.com Blending Guide\" target=\"_blank\" rel=\"noopener noreferrer\"\u003erace-gas.com\u003c\/a\u003e for their Blending Guide.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow much octane does it add?\u003c\/h3\u003e\n\u003cp\u003eMixed with pump gasoline, it makes racing fuel with octane between 108 and 112 R+M\/2. For example, 1 can with 4 gallons of 91 makes 4 gallons of 110 Octane R+M\/2.\u003c\/p\u003e\n\u003ch3\u003eIs it safe for my engine?\u003c\/h3\u003e\n\u003cp\u003eRace Gas says RACE GAS has been laboratory tested and race proven to perform in any gasoline-powered engine. ULTRA is an unleaded formula made without alcohols or naphthalene.\u003c\/p\u003e\n\u003ch3\u003eMy car is pulling timing. Will this help?\u003c\/h3\u003e\n\u003cp\u003eYes. If you notice your car is pulling ignition time, this will cure it. It is also great for dyno days, track days, or when bad fuel is in your area.\u003c\/p\u003e\n\u003ch3\u003eThere is no high octane fuel where I live. Can I still run a high octane tune?\u003c\/h3\u003e\n\u003cp\u003eYes. It is strong enough to turn pump fuel into over 100 Octane fuel for a high octane fuel Tune\/Piggyback Map, and small enough to keep in your trunk.\u003c\/p\u003e","brand":"Race Gas","offers":[{"title":"Default Title","offer_id":37648001827002,"sku":"RG-200032","price":51.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/161162001224811617_Race-Gas-Ultra_32oz.jpg?v=1606436421"},{"product_id":"wagner-tuning-intercooler-upgrade-elantra-gts-n-line-es-vt2-forte-gt-forte5","title":"Wagner Tuning Intercooler 1.6T","description":"\u003cp\u003e\u003cstrong\u003eContact us for current availability and lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe now discount ECU tuning for Wagner Tuning FMIC buyers by 15%. Starting March 14th \/ 2022.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Hyundai\/KIA 1.6TGDI: Elantra Sport, Elantra GT N Line, Elantra GTS, Veloster Turbo 2, Forte GT and Forte5.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eA competition racing intercooler kit from Wagner Tuning for the Hyundai\/KIA 1.6TGDI. Simply put, it is the best available for our platform. We have logged this intercooler against other performance replacements, universal and direct fit, and it performs the best from all our data: it beats our own V2.2 FMIC kit by 7 degrees, and this core shows zero sign of heat soak, even on a 300whp bigger turbo 1.6T.\u003c\/p\u003e\n\u003cp\u003ePerfectly suited for track days, big turbos, or even just to unleash your tune's full potential, this will bolt on 25whp-30whp on a tuned vehicle. Expect 10whp+ on an OEM tuned vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_ECz8WrIiJK.png?v=1621053631\" alt=\"Wagner Tuning competition intercooler for the Hyundai and Kia 1.6T-GDI, front view of the stepped tube fin core\" loading=\"lazy\" width=\"962\" height=\"488\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eMade In Germany, and CAD designed to optimize internal flow and reduce back pressure. The WAGNERTUNING high-performance intercooler has a new competition core (tube fin) measuring 580 mm x 120 mm x 150 mm + 580 mm x 62 mm x 70 mm (22.83Inch x 4.72Inch x 5.9Inch + 22.83Inch x 2.44Inch x 2.76Inch), a stepped core of 12.96 liters (790.87Inch³). It offers a 60% larger frontal surface and 118% more core volume than the stock intercooler.\u003c\/p\u003e\n\u003cp\u003eThe aluminum cast endtanks were designed in CAD and optimized in CFD simulations for an ideal internal airflow, which gives excellent cooling with a minimal back pressure. The newly developed performance core gives the adjoining components, for example the watercooler, enough air flow by using a specially prepared air baffle, which is why Wagner calls the kit perfect for racing use: an optimal cooling effect of the charged air with a significant increase in performance. An anti-corrosion powder coating with perfect heat-conducting properties protects the intercooler from all environmental influences, so a lasting and optimal cooling effect can be guaranteed. Wagner says all its products are subject to a continuous quality monitoring.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with a full Aero Guide which helps bring even more cold air into the large intercooler core. Wagner Tuning thought of everything with this kit, with the highest level of engineering available (CAD Design, 3D Scanning, pressure drop vs oem, temp probes on the Turbo and Intercooler).\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompetition core (tube fin), stepped: 580 mm x 120 mm x 150 mm + 580 mm x 62 mm x 70 mm\u003c\/li\u003e\n\u003cli\u003eStepped core volume: 12.96 liters \/ 790.87Inch³\u003c\/li\u003e\n\u003cli\u003e60% larger frontal surface and 118% more core volume than the stock intercooler\u003c\/li\u003e\n\u003cli\u003eInlet diameter: Ø65 mm; outlet diameter: Ø65 mm\u003c\/li\u003e\n\u003cli\u003eDetails stock intercooler: V = 5.94 L \/ 362.48Inch³; A = 660 cm² \/ 102.3Inch²\u003c\/li\u003e\n\u003cli\u003eDetails WAGNERTUNING intercooler: V = 12.96 L \/ 790.87Inch³ (+118%); A = 1055 cm² \/ 163.53Inch² (+60%)\u003c\/li\u003e\n\u003cli\u003eBeats our own V2.2 FMIC kit by 7 degrees; zero sign of heat soak, even on a 300whp bigger turbo 1.6T\u003c\/li\u003e\n\u003cli\u003e25whp-30whp on a tuned vehicle; 10whp+ on an OEM tuned vehicle\u003c\/li\u003e\n\u003cli\u003eFull Aero Guide to bring even more cold air into the core\u003c\/li\u003e\n\u003cli\u003eKit includes half the Hot Pipe (up-sized to 2.5\" to the inlet of the intercooler) and the correct sized coupler for the OEM Cold Pipe\u003c\/li\u003e\n\u003cli\u003eAnti-corrosion powder coating with heat-conducting properties\u003c\/li\u003e\n\u003cli\u003eMade In Germany\u003c\/li\u003e\n\u003cli\u003eThis kit comes with: 1 intercooler, 2 silicone hoses (black), 1 air baffle, 1 mounting material, 1 installation instruction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_tV7mjJzuzN.png?v=1621053631\" alt=\"Wagner Tuning 1.6T-GDI intercooler kit: intercooler, black aero guide air baffle, two black silicone hoses and a bag of mounting hardware\" loading=\"lazy\" width=\"970\" height=\"499\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eOptions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 1.6T.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eWe ensure the correct coupler for the correct car, so this kit is a direct replacement. The kit includes half the Hot Pipe (up-sized to 2.5\" to the inlet of the intercooler) and the correct sized coupler for the OEM Cold Pipe. The installation is done by replacing the original intercooler and is easy to perform (plug and play). We recommend installation by a qualified technician.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/received_904297593648749.jpg?v=1621053631\" alt=\"Wagner Tuning intercooler fitted below the bumper beam with its black aero guide, front bumper removed\" loading=\"lazy\" width=\"4032\" height=\"3024\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eWagner Tuning covers its intercoolers against material and manufacturing defects for 48 months from the original invoice date, once the intercooler is registered with Wagner using its serial number. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich cars does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe Hyundai\/KIA 1.6TGDI: Elantra Sport, Elantra GT N Line, Elantra GTS, Veloster Turbo 2, Forte GT and Forte5.\u003c\/p\u003e\n\u003ch3\u003eHow much power will it add?\u003c\/h3\u003e\n\u003cp\u003eIt will bolt on 25whp-30whp on a tuned vehicle. Expect 10whp+ on an OEM tuned vehicle.\u003c\/p\u003e\n\u003ch3\u003eIs it a direct replacement?\u003c\/h3\u003e\n\u003cp\u003eYes. We ensure the correct coupler for the correct car, and the kit includes half the Hot Pipe, up-sized to 2.5\" to the inlet of the intercooler, and the correct sized coupler for the OEM Cold Pipe.\u003c\/p\u003e\n\u003ch3\u003eHow does it compare with other intercoolers?\u003c\/h3\u003e\n\u003cp\u003eWe have logged it against other performance replacements, universal and direct fit, and it performs the best from all our data. It beats our own V2.2 FMIC kit by 7 degrees.\u003c\/p\u003e","brand":"Wagner","offers":[{"title":"1.6T","offer_id":37832592785594,"sku":"200001153","price":1269.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/msedge_ECz8WrIiJK.png?v=1621053631"},{"product_id":"red-line-mt-lv-70w-75w-gl-4-gear-oil","title":"MT-LV 70W\/75W GL-4 Gear Oil (DCT - DRY) (6SPD) Meets OEM Hyundai\/Kia SPEC.","description":"\u003cp\u003e\u003cstrong\u003eIN STOCK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product can be used in 6spd and DCT DRY transmissions.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Not compatible with N Series DCT Wet Cars)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(Not N Series 8 Speed DCT Wet, The DCT 7 Speeds found in the Elantra Sport and Veloster Turbo).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt meets Hyundai specifications for DCT and 6SPD transmission. We highly recommend this product with both 6SPD and DCT DRY 7.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e 6SPD and DCT DRY transmissions, as noted above. Not for N Series DCT Wet cars. Red Line MT-LV 70W\/75W GL-4 Gear Oil.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eRed Line MT-LV 70W\/75W GL-4 gear oil for 6SPD and DCT DRY transmissions, meeting the OEM Hyundai\/Kia specification. This is the only Performance Oil that meets Hyundai Spec for the DCT Transmission!\u003c\/p\u003e\n\u003cp\u003eThis product has been tested and is used by us in all our R\u0026amp;D cars without Wet DCT transmission. This product truly adds a lot of protection to your transmission, at a nearly free cost vs transmission repair costs!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/0000822_mt-lv-70w75w-gl-4-gear-oil_464.png?v=1607236112\" alt=\"Red Line MT-LV 70W\/75W GL-4 gear oil, one quart bottle\" loading=\"lazy\" width=\"285\" height=\"464\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/bBhHnoA8nfc\" height=\"349\" width=\"560\"\u003e\u003c\/iframe\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eSince most GL-5 gear oils for differentials are too slippery for manual transmissions, Red Line offers these products that ensure proper shifting while providing ultimate wear protection. MT-LV has the appropriate coefficient of friction for most manual transmission synchronizers (other's synthetic gear oils are often too slippery for proper synchro engagement). Red Line offers lubricants to pinpoint nearly every transmission application. MT-LV, MTL, MT-85 \u0026amp; MT-90 are not for use in differentials with hypoid gears.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePopular in Toyota\/Lexus LF 75W, BMW X-Drive and other transfer cases calling for Shell TF0870\u003c\/li\u003e\n\u003cli\u003eRecommended for Mercedes 235.10, Dodge\/Fiat BOT 350 M3, GM BOT 303 mod, Toyota\/Scion Manual Transmissions Gear Oil LV, VW\/Audi and BOT270A Graziano Transaxle for Aston Martin, Audi \u0026amp; Lamborghini\u003c\/li\u003e\n\u003cli\u003eOffers quicker shifts, a perfect synchronizer coefficient of friction\u003c\/li\u003e\n\u003cli\u003eSafe for brass synchros, as it lacks the reactive sulfurs found in most GL-5 oils that cause damage\u003c\/li\u003e\n\u003cli\u003eHigh performance gear protection and longer synchro life\u003c\/li\u003e\n\u003cli\u003eEliminates notchy shifting, even when cold\u003c\/li\u003e\n\u003cli\u003eLow fluid friction to improve power transfer\u003c\/li\u003e\n\u003cli\u003eSatisfies the gear oil viscosity requirements of 70W \u0026amp; 75W\u003c\/li\u003e\n\u003cli\u003eRecommended for GL-1, GL-3 and GL-4 applications as well as where most special synchromesh fluids are specified\u003c\/li\u003e\n\u003cli\u003eExcellent gear and synchro protection, balanced slipperiness for easier shifting in cold climates\u003c\/li\u003e\n\u003cli\u003eExcellent for high- and low-mile transmissions\u003c\/li\u003e\n\u003cli\u003eCompatible with petroleums and other synthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuitable replacement for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAPI GL-4 \/ GL-3 \/ GL-1\u003c\/li\u003e\n\u003cli\u003eSAE 70W\/75W\u003c\/li\u003e\n\u003cli\u003eBMW X-Drive Transfer Case Fluid\u003c\/li\u003e\n\n\n\u003cli\u003eCadillac OEM fluid\u003c\/li\u003e\n\u003cli\u003eCastrol BOT 270A - Graziano Transaxle for Aston Martin, Audi and Lamborghini\u003c\/li\u003e\n\u003cli\u003eCastrol BOT 350 M3\u003c\/li\u003e\n\u003cli\u003eCastrol BOT 303 mod\u003c\/li\u003e\n\u003cli\u003eChevron GS CALTEX MTF HD 70W\u003c\/li\u003e\n\u003cli\u003eChrysler\/Dodge\/Jeep 9.55550-MZ6\u003c\/li\u003e\n\u003cli\u003eDodge\/Fiat OEM fluid\u003c\/li\u003e\n\u003cli\u003eFord XT-11-QDC\u003c\/li\u003e\n\u003cli\u003eFord WSS-M2C200-D2\u003c\/li\u003e\n\u003cli\u003eGM 10-4037\u003c\/li\u003e\n\n\n\u003cli\u003eHonda i-Shift MTF-3\u003c\/li\u003e\n\u003cli\u003eHonda i-Shift MTF-III\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHyundai\/Kia DCT and 6SPD specification\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eJaguar\/Land Rover OEM fluid\u003c\/li\u003e\n\n\u003cli\u003eMB 235.10\u003c\/li\u003e\n\u003cli\u003eMB 235.73\u003c\/li\u003e\n\u003cli\u003eMB 317\u003c\/li\u003e\n\n\n\n\u003cli\u003eNissan\/Infinity TF0870\u003c\/li\u003e\n\u003cli\u003ePorsche OEM fluid\u003c\/li\u003e\n\n\n\u003cli\u003eShell SPIRAX S6 GHME 70W\u003c\/li\u003e\n\u003cli\u003eShell TF 0870\u003c\/li\u003e\n\u003cli\u003eSK HK MTF 70W\u003c\/li\u003e\n\u003cli\u003eToyota MT Gear Oil LV 75W\u003c\/li\u003e\n\n\u003cli\u003eToyota\/Lexus transfer case fluid \"Genuine Gear Oil LF 75W\"\u003c\/li\u003e\n\u003cli\u003eToyota\/Scion Manual Transmission Oil LV\u003c\/li\u003e\n\n\u003cli\u003eVW G 052 726\u003c\/li\u003e\n\u003cli\u003eVW\/Audi G 052 171\u003c\/li\u003e\n\u003cli\u003eVW\/Audi G 052 512 A2\u003c\/li\u003e\n\u003cli\u003eVW\/Audi G 055 515\u003c\/li\u003e\n\u003cli\u003eVW\/Audi G 052 527 A2\u003c\/li\u003e\n\u003cli\u003eVW\/Audi G 052 725\u003c\/li\u003e\n\u003cli\u003eVW\/Audi G 060 726 A2\u003c\/li\u003e\n\u003cli\u003eVW\/Audi G 070 726 A2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003cp\u003eUse it in 6SPD and DCT DRY transmissions; it is not for N Series DCT Wet cars. MT-LV is not for use in differentials with hypoid gears. We recommend having the fluid changed by a qualified technician. Contact us before ordering if you have questions about fitment.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eCan I use it in an N Series DCT Wet car?\u003c\/h3\u003e\n\u003cp\u003eNo. It is not compatible with N Series DCT Wet cars.\u003c\/p\u003e\n\u003ch3\u003eWhich transmissions is it for?\u003c\/h3\u003e\n\u003cp\u003e6SPD and DCT DRY transmissions. It meets Hyundai specifications for DCT and 6SPD transmission.\u003c\/p\u003e\n\u003ch3\u003eCan I use it in a differential?\u003c\/h3\u003e\n\u003cp\u003eNo. MT-LV is not for use in differentials with hypoid gears.\u003c\/p\u003e","brand":"Red Line","offers":[{"title":"Default Title","offer_id":37705035415738,"sku":"50604","price":32.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/products\/0000822_mt-lv-70w75w-gl-4-gear-oil_464.png?v=1607236112"}],"url":"https:\/\/n75motorsports.ca\/collections\/kia.oembed?page=25","provider":"N75 MotorSports","version":"1.0","type":"link"}