{"product_id":"eibach-pro-kit-lowering-springs-kia-stinger","title":"Eibach Pro-Kit Lowering Springs - Kia Stinger","description":"\u003cp\u003e\u003cstrong\u003eON ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Kia Stinger, fitment per the Marcor Automotive catalogue. Eibach lists it only for rear-wheel-drive cars: the 2018-2021 Kia Stinger 2.0L RWD and 2020-2023 Kia Stinger 2.5T RWD, and also the 2019-2022 Genesis G70 2.0T RWD and 2023-2026 Genesis G70 2.5T RWD. Eibach does not list the Stinger GT 3.3L or any AWD car for this kit.\u003c\/p\u003e\n\u003ch2\u003eWhat this is\u003c\/h2\u003e\n\u003cp\u003eEibach Pro-Kit lowering springs for the Kia Stinger: a set of 4 springs for the rear-wheel-drive 2.0L and 2.5T cars. Eibach says the PRO-KIT delivers high performance handling and improved appearance, without compromising ride quality.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/d43ffcc45f727223005ae0e3207dbd25__05585.1706906863.1280.1280.jpg?v=1794187868\" alt=\"Eibach Pro-Kit lowering springs for the rear-wheel-drive Kia Stinger 2.0L and 2.5T, set of four black springs\" loading=\"lazy\" width=\"1280\" height=\"854\" style=\"max-width: 100%; height: auto; display: block; margin: 16px auto;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDesign\u003c\/h2\u003e\n\u003cp\u003eA progressive spring design for excellent ride quality, tested with the factory dampers. The kit is 2 front springs and 2 rear springs. How far it lowers the car depends on the model; Eibach's figures are below.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSet of 4 springs: 2 front, 2 rear\u003c\/li\u003e\n\u003cli\u003eLowering on the 2018-2021 Kia Stinger 2.0L RWD: 0.8\" front, 0.8\" rear\u003c\/li\u003e\n\u003cli\u003eLowering on the 2020-2023 Kia Stinger 2.5T RWD: 1.1\" front, 0.6\" rear\u003c\/li\u003e\n\u003cli\u003eLowering on the 2019-2022 Genesis G70 2.0T RWD: 0.7\" front, 0.6\" rear\u003c\/li\u003e\n\u003cli\u003eLowering on the 2023-2026 Genesis G70 2.5T RWD: 1.1\" front, 0.6\" rear\u003c\/li\u003e\n\u003cli\u003eProgressive spring design for excellent ride quality\u003c\/li\u003e\n\u003cli\u003eLower center of gravity\u003c\/li\u003e\n\u003cli\u003eHigh performance handling and aggressive good looks\u003c\/li\u003e\n\u003cli\u003eStop quicker, corner faster\u003c\/li\u003e\n\u003cli\u003eTested with factory dampers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation notes\u003c\/h2\u003e\n\u003cp\u003eEibach says only qualified mechanics experienced in the installation and removal of suspension components should do this installation, and a hoist is highly recommended. Trim the factory bump stops: 20mm off the bottom of the front ones and 30mm off the bottom of the rear ones. Never use impact wrenches or impact guns on the shock absorber piston components, shafts or piston rod nuts. Fit the springs with the Eibach logo right side up and keep all the original stock spring isolators, dampers and tubing. On the MacPherson strut front suspension, mark the orientation of the upper perch against the lower perch before taking it apart and keep it the same, or noise may result.\u003c\/p\u003e\n\u003cp\u003eAfter installation, check and adjust if necessary the wheel alignment (camber, caster and toe), tire and wheel fender clearance if you run aftermarket tires and wheels, brake line clearance and attachments, and the anti-lock and anti-skid system sensors. Eibach does not guarantee fitment, height or warranty on applications it does not list.\u003c\/p\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eEibach gives a 5-year limited warranty against factory defects on its Pro-Kit springs, for the original purchaser with proof of purchase while they still own the vehicle. The springs must be installed by a qualified, licensed mechanic, and racing use, misuse and overloading are not covered. Contact us with your order number if you need to make a claim.\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes it fit the Stinger GT 3.3L or an AWD Stinger?\u003c\/h3\u003e\n\u003cp\u003eEibach does not list either. This kit is listed for the rear-wheel-drive Stinger 2.0L and 2.5T, and the rear-wheel-drive Genesis G70 2.0T and 2.5T.\u003c\/p\u003e\n\u003ch3\u003eHow much does it lower a Stinger?\u003c\/h3\u003e\n\u003cp\u003e0.8\" front and rear on the 2018-2021 Stinger 2.0L RWD; 1.1\" front and 0.6\" rear on the 2020-2023 Stinger 2.5T RWD (Eibach's figures).\u003c\/p\u003e\n\u003ch3\u003eDo the bump stops need trimming?\u003c\/h3\u003e\n\u003cp\u003eYes. Eibach's instructions trim 20mm off the bottom of the front bump stops and 30mm off the bottom of the rear ones.\u003c\/p\u003e\n\u003ch3\u003eIs it in stock?\u003c\/h3\u003e\n\u003cp\u003eIt is on order: available to order in.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":50985790701754,"sku":"E10-46-035-02-22","price":624.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/1359\/3623\/files\/d43ffcc45f727223005ae0e3207dbd25__05585.1706906863.1280.1280.jpg?v=1794187868","url":"https:\/\/n75motorsports.ca\/products\/eibach-pro-kit-lowering-springs-kia-stinger","provider":"N75 MotorSports","version":"1.0","type":"link"}