Contact us for current availability and lead time
Fits: Universal hood catch kit for above-panel mounting: each catch sits in an opening cut in the hood, and the strike pins are fixed to the body under the hood.
What this is
A pair of AeroCatch flush-mounted hood catches, for above-panel mounting. Each catch sits in an opening cut in the hood, flush with the panel. A steel strike pin, fixed to the body under the hood, passes up into the catch, and the catch latches onto it. To open the hood, lift the catch handle to release the pin. The kit holds the hood at two points.

Design
Above-panel mounting: the catch body drops into a cut-out in the hood from above and is held by six screws through the panel into a nut plate underneath. The steel strike pin is fixed to the body under the hood and passes up into the catch, which latches onto it; rubber bump stops go with the strike pins.
Features
- Flush-mounted hood catches, sitting flush with the hood panel
- Above-panel mounting: six screws per catch through the panel into a nut plate underneath
- Steel strike pins, with rubber bump stops
- Holds the hood at two points
- Kit contents: 2 AeroCatch catches, 2 nut plates, 2 steel strike pins, 2 rubber bump stops, 1 fastener kit and 1 arrow sticker set

Installation notes
You have to cut your hood. Each catch needs an oval opening in the hood plus holes for its six screws, and the strike pins mount to the body underneath. The diagram below shows the above-panel mounting: catch on top, the panel with an oval cut-out, the nut plate below, and six screws and nuts. We recommend installation by a qualified technician.

Warranty
Contact us with your order number if you have any problem with your part.
FAQ
Do I have to cut my hood?
Yes. Each catch needs an oval opening in the hood plus holes for its six screws, and the strike pins mount to the body underneath.
How many catches are in the kit?
Two, with a strike pin, bump stop and nut plate for each, plus the fastener kit and arrow stickers.
How do I open the hood?
Lift the catch handle to release the strike pin.