MBRP

MBRP 3" T304 Stainless Cat-Back Exhaust - Dual Split Rear Exit - Hyundai Veloster N 2019-2022

  • Sale
  • Regular price $1,884.99 CAD
Shipping calculated at checkout.


ON ORDER

Fits: Hyundai Veloster N, 2.0L, 2019-2022.

What this is

MBRP's 3-inch T304 stainless cat-back for the Veloster N, dual split rear exit with carbon fibre tips. T304 rather than the cheaper aluminized or 409 stainless matters in Ontario: 304 is the grade that survives salt without blooming surface rust at the welds and hanger tabs.

It is a full 3" mandrel-bent path from the cat back, which on a 2.0T that responds well to reduced backpressure is the single most effective exhaust change after the downpipe. The tone is deeper and clearly louder than factory, with the volume arriving under load rather than at idle.

We also list the Armor Lite aluminized version at a lower price and the street-profile T304 version. This one is the louder of the T304 pair; if you want the quieter one, choose the street-profile version.

MBRP 3-inch T304 stainless cat-back exhaust with dual split rear exit and carbon fibre tips for the Hyundai Veloster N

Design

The system bolts to the downpipe flange and replaces the factory exhaust from there back: a front pipe and mid-pipe run to a Y-pipe that splits to a tail pipe on each side, each with a carbon fibre tip. The tubing is 3" mandrel-bent T304 stainless, the salt-resistant grade, not aluminized. The passenger-side tail pipe is MBRP's Active Tail Pipe: the OEM exhaust valve actuator moves onto it and is plugged back into the factory wiring.

Features

  • 3" mandrel-bent T304 stainless: salt-resistant grade, not aluminized
  • Dual split rear exit with carbon fibre tips
  • Factory hanger locations retained
  • No cutting or welding; no tune required
  • OEM exhaust valve actuator moves onto MBRP's passenger-side Active Tail Pipe
  • In the kit, per MBRP's instructions: front pipe, mid-pipe, Y-pipe, driver-side tail pipe, passenger-side Active Tail Pipe, four 3.0" clamps, three M5x22 hex bolts, three M5 flat washers, a spring hub, two tips and two isolators
  • MBRP limited lifetime warranty on the stainless

Installation notes

MBRP's instructions unbolt the factory exhaust from the downpipe and unplug the exhaust valve on the passenger-side outlet. The OEM valve actuator then moves onto the new passenger-side Active Tail Pipe, using the supplied bolts, washers and spring hub with the actuator's OEM nuts and spring. The new front pipe bolts to the downpipe flange with the OEM gasket and hardware, the hangers go into the OEM rubber isolators, the pipes join with the supplied 3.0" clamps, and the valve wiring is reconnected at the end. 2022 models require the two rear OEM rubber isolators to be replaced with the supplied isolators. We recommend installation by a qualified technician.

Warranty

MBRP limited lifetime warranty on the stainless. Contact us with your order number if you need to make a claim.

FAQ

Which T304 version should I choose?

This version is the louder of the T304 pair. If you want the quieter one, choose the street-profile version. We also list the Armor Lite aluminized version at a lower price.

Do I need a tune?

No tune is required, and there is no cutting or welding.

Do 2022 models need anything extra?

Yes. MBRP's instructions replace the two rear OEM rubber isolators with the two isolators supplied in the kit.

Is shipping free?

FREE shipping on orders over $400 CAD (within Canada Only).



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)