IN STOCK
Fits: Universal: water/methanol injection systems using 1/4in tubing.
What this is
The AEM Water/Methanol Injection Inline Filter traps particulates down to 40 microns before they can reach the pump, nozzle, check valve and flow sensor, protecting the whole injection system. It installs on the low-pressure side of the system, between the reservoir and the pump, and uses 1/4in push-lock fittings for quick installation on any system plumbed with 1/4in nylon tubing.

Design
A micronic mesh screen inside the filter housing catches particles as small as 40 microns, and the filter bowl is removable, so the element can be inspected and cleaned. An arrow on the housing shows the direction of flow. AEM says the filter gives a cleaner flow of water/methanol into the pump, lines and nozzles, increasing overall system longevity, and highly recommends it when you run the AEM water/methanol injection flow gauge.
Features
- 40 micron filtration
- 1/4 in push-lock fittings
- Installs on low-pressure side (tank to pump)
- Protects the pump, nozzle, check valve and flow sensor from particulates
- Removable filter bowl; the element can be inspected and cleaned
Installation notes
Install the filter on the low-pressure side of the system, between the tank and the pump. AEM's instructions: splice it into the existing line by cutting the tubing with a sharp razor blade, and fit it with the arrow on the housing pointing in the direction of flow. Make sure the removable filter bowl is tight, then prime the injection system and check for leaks. Check that the filter does not touch any hot or moving parts, and inspect and clean the filter element periodically for the longest service life.
AEM strongly recommends never exceeding a 50% methanol concentration in any AEM water/methanol system. We recommend installation by a qualified technician.
Warranty
AEM Electronics gives the original purchaser a 90-day warranty against defects in material and workmanship on its water/methanol injection products, from the date of the original purchase, and will repair or replace a defective part. Normal wear, improper installation, misuse, reversed polarity wiring and cosmetic damage are not covered. Contact us with your order number if you need to make a claim.
FAQ
Where does the filter go?
On the low-pressure side of the system, between the reservoir and the pump, with the arrow on the housing pointing in the direction of flow.
What size tubing does it fit?
It uses 1/4in push-lock fittings, for any system plumbed with 1/4in nylon tubing.
How fine is the filtration?
It traps particulates down to 40 microns.
Is shipping free?
FREE shipping on orders over $400 CAD (within Canada Only).