IN STOCK
This is the standalone reservoir with level sensor, cap and mounting hardware, not a complete injection system.
Fits: Universal: AEM water/methanol injection systems. AEM notes that its conductive fluid level sensor is only compatible with the V2 controller, not V1.
What this is
The AEM Water/Methanol Injection Reservoir is a 1.15-gallon tank with an integrated, conductive low-level fluid sensor that resists the false readings caused by debris or fluid slosh. Its compact moulded design allows flexible mounting, and the large screw-on cap makes refilling quick and easy.

Design
A compact moulded tank that holds 1.15 gallons, with a large screw-on filler cap. The conductive low-level fluid sensor is built into the tank to warn of a low fluid level, and AEM fits it with a positive-lock connector with color-matched wires for the wiring harness. AEM gives the tank dimensions as 10 in high x 8.5 in wide x 4.25 in deep.
Features
- Capacity: 1.15 gallon
- Integrated conductive low-level fluid sensor
- Sensor resists false readings caused by debris or fluid slosh
- Compact moulded design for flexible mounting
- Large screw-on cap for quick, easy refilling
- Includes cap and mounting hardware
- Tank dimensions (AEM): 10 in high x 8.5 in wide x 4.25 in deep
Installation notes
AEM's instructions say the tank must be mounted below the injection point; otherwise fluid can leak into the intake tract through gravity or siphoning and damage the engine. The tank and pump must be mounted in the same area. Mount the tank with the supplied #8 sheet metal screws and large washers, or with the 5/16-18 bolts and Nylock nuts. Every tank is leak-tested during assembly and the metal fitting is bonded to the plastic tank with a sealant adhesive, so do not try to tighten the fitting any further.
AEM strongly recommends never exceeding a 50% methanol concentration in any AEM water/methanol system. We recommend installation by a qualified technician.
Warranty
AEM Electronics gives the original purchaser a 90-day warranty against defects in material and workmanship on its water/methanol injection products, from the date of the original purchase, and will repair or replace a defective part. Normal wear, improper installation, misuse, reversed polarity wiring and cosmetic damage are not covered. Contact us with your order number if you need to make a claim.
FAQ
Is this a complete injection system?
No. This is the standalone reservoir with level sensor, cap and mounting hardware.
Will the level sensor work with my AEM controller?
AEM notes that the conductive fluid level sensor is only compatible with the V2 controller, not V1.
How big is it?
It holds 1.15 gallons. AEM gives the tank dimensions as 10 in high x 8.5 in wide x 4.25 in deep.
Is shipping free?
FREE shipping on orders over $400 CAD (within Canada Only).