ON ORDER at our distributor as of 5 November 2026
Read this before you order: this is the extra-clearance set. It is a specialist part for high to extreme power builds. On a standard crankshaft in a normal street engine it is the wrong choice: it costs oil pressure and can make the engine noisy on a cold start for no benefit. If your crank is finished to factory specification, buy our standard-clearance main set instead.
No thrust washers are included. Ten shells only.
Fits: Hyundai i30 N 2018 on, Veloster N 2019-2022, Elantra N 2022-2026 and Kona N 2022-2023 with the 2.0L Theta II turbo (G4KH). ACL's own application guide names the i30 N. Clearance is a build choice, never a fitment choice, so this set fits exactly the same engine as the standard one.
What this is
The ACL Race Series Main Bearing Set with extra oil clearance: the same ten tri-metal main shells as our standard set, machined with a thinner wall so the finished engine runs an extra 0.001 in (0.025 mm) of oil clearance. It is a specialist part for high to extreme power builds.

Design
The shells are machined with a thinner wall: 2.009 mm at the crown, 0.013 mm thinner per shell than the standard set. What the extra clearance buys you, in ACL's words: additional oil flow through the bearings, to improve delivery to high load zones and improve cooling; room for increased housing distortion under very high inertial and firing loads; room for increased crankshaft flex under high load; and space for specialised anti-friction coatings.
A note on appearance: Race Series shells arrive dark and tarnished, with no cosmetic tin flash. Deliberate, not a defect.
Features
- 10 shells, 5 upper and 5 lower, positions 1 to 5
- Standard journal size, which is the only size ACL offers in this clearance
- Extra clearance of 0.001 in (0.025 mm) over standard
- Wall thickness 2.009 mm at the crown, 0.013 mm thinner per shell than the standard set
- Block tunnel bore 56.000-56.018 mm
- Crank main journal 51.942-51.960 mm
- Design vertical oil clearance 0.036-0.088 mm
- No thrust washers included
Installation notes
Mixing grades is normal practice. ACL expect builders to mix adjacent grades on one journal to reach a target clearance: one extra-clearance shell paired with one standard shell halves the change, to 0.0005 in (0.0125 mm).
Not sure this suits your car? Ask us before ordering; we would rather check the fitment than process a return.
Warranty
Contact us with your order number if you have any problem with your part.
FAQ
Should I use this set in a stock street engine?
No. On a standard crankshaft in a normal street engine it is the wrong choice: it costs oil pressure and can make the engine noisy on a cold start for no benefit. If your crank is finished to factory specification, buy our standard-clearance main set instead.
Does it fit a different engine from the standard set?
No. Clearance is a build choice, never a fitment choice, so this set fits exactly the same engine as the standard one: the 2.0L Theta II turbo (G4KH).
Can I mix it with standard shells?
Yes. ACL expect builders to mix adjacent grades on one journal: one extra-clearance shell paired with one standard shell halves the change, to 0.0005 in (0.0125 mm).
Are thrust washers included?
No. This set is ten shells only.