IN STOCK at our distributor as of 5 November 2026
Standard size means a crankshaft still at factory journal size. If your crank has been reground, you need an undersize set instead: we list King rod bearings in 0.25 mm and 0.50 mm undersize.
Rod bearings only. There are no main bearings in this set, so a full bottom-end refresh needs the main set as well.
Fits: Hyundai i30 N 2018 on, Veloster N 2019-2022, Elantra N 2022-2026 and Kona N 2022-2023 with the 2.0L Theta II turbo (G4KH). ACL's own application guide names the i30 N.
What this is
The ACL Race Series Rod Bearing Set in standard size: a full set of eight tri-metal big-end shells for the 2.0 litre Theta II turbo bottom end. Copper-lead-tin lining on a high-tensile steel back, with extra crush and extra eccentricity so the shells hold their shape and keep an oil film under boost and high rpm.
If you want a tighter oil film on a standard crank, we also list this same ACL bearing in the tight-clearance grade.

Design
From ACL: tri-metal construction, with a lead-tin-copper overlay over a nickel barrier layer and a copper-lead-tin lining on SAE1010 high-tensile steel. The higher steel tensile strength improves bearing retention, and the increased eccentricity compensates for bore distortion and helps the hydrodynamic oil film form.
A note on appearance: Race Series shells arrive with a dark tarnished colouring that can look black, brown or blue. ACL applies no cosmetic tin flash. It is deliberate, and it is not a defect or old stock.
Features
- 8 shells, one pair per rod
- Standard journal size, standard clearance
- Rod housing bore 51.000-51.018 mm
- Crank rod journal 47.954-47.972 mm
- Wall thickness 1.513 mm at the crown
- Shell length 17.00 mm
- Design vertical oil clearance 0.010-0.062 mm
- Tri-metal: lead-tin-copper overlay, nickel barrier layer and copper-lead-tin lining on SAE1010 high-tensile steel
- Extra crush and extra eccentricity, so the shells hold their shape and keep an oil film under boost and high rpm
Installation notes
Final oil clearance is the engine builder's responsibility, and ACL asks that shells are never polished on the bearing surface to change it.
Not sure this suits your car? Ask us before ordering; we would rather check the fitment than process a return.
Warranty
Contact us with your order number if you have any problem with your part.
FAQ
Which engines does it fit?
The 2.0L Theta II turbo (G4KH) in the Hyundai i30 N 2018 on, Veloster N 2019-2022, Elantra N 2022-2026 and Kona N 2022-2023.
My crankshaft has been reground. Is this the right set?
No. Standard size is for a crankshaft still at factory journal size. A reground crank needs an undersize set: we list King rod bearings in 0.25 mm and 0.50 mm undersize.
Are main bearings included?
No. This is a rod bearing set only, so a full bottom-end refresh needs the main set as well.
Why are the shells dark?
Race Series shells arrive with a dark tarnished colouring that can look black, brown or blue, because ACL applies no cosmetic tin flash. It is deliberate, and it is not a defect or old stock.