ACL

ACL Race Series Rod Bearing Set, Tight Clearance - Hyundai i30 N / Veloster N / Elantra N / Kona N 2.0T

  • Sale
  • $158.00 USD
  • Regular price $232.00 USD
Shipping calculated at checkout.


ON ORDER at our distributor as of 6 November 2026

Read this before you order: this is a clearance grade, not an undersize bearing. ACL list it on the same table as the standard and extra-clearance sets, all three for a crankshaft at standard journal size. It is the tight mirror image of the extra-clearance set. If your crankshaft has been reground undersize, this is the wrong part.

Fits: Hyundai i30 N 2018 on, Veloster N 2019-2022, Elantra N 2022-2026 and Kona N 2022-2023 with the 2.0L Theta II turbo (G4KH). ACL's own application guide names the i30 N. Journal and housing dimensions are unchanged from the standard set; only the wall thickness differs.

What this is

The ACL Race Series Rod Bearing Set in tight clearance: eight tri-metal big-end shells for the 2.0 litre Theta II turbo bottom end, machined with a thicker wall so the assembled engine runs 0.025 mm (0.001 in) less oil clearance than our standard set.

Who it is for: two kinds of engine. One is a build where you want a tighter oil film than standard for better control and stability. The other is a crankshaft that measures a whisker under standard from ordinary wear or a light polish, where the thicker shell brings clearance back into specification without a regrind.

ACL Race Series connecting rod bearing shells in front of four Race Series Performance Engine Bearings boxes

Design

From ACL: tri-metal construction, with a lead-tin-copper overlay over a nickel barrier layer and a copper-lead-tin lining on SAE1010 high-tensile steel. The higher steel tensile strength improves bearing retention, and the increased eccentricity compensates for bore distortion and helps the hydrodynamic oil film form. The wall is approximately 0.0125 mm thicker per shell than the standard set.

A note on appearance: Race Series shells arrive with a dark tarnished colouring that can look black, brown or blue. ACL applies no cosmetic tin flash. It is deliberate, and it is not a defect.

Features

  • 8 shells, one pair per rod
  • Standard journal size with 0.025 mm (0.001 in) reduced clearance
  • Rod housing bore 51.000-51.018 mm
  • Crank rod journal 47.954-47.972 mm
  • Wall approximately 0.0125 mm thicker per shell than the standard set
  • Tri-metal: lead-tin-copper overlay, nickel barrier layer and copper-lead-tin lining on SAE1010 high-tensile steel
  • Rod bearings only: there are no main bearings in this set

Installation notes

Mixing grades is normal practice. ACL expect builders to mix adjacent grades on one journal to land on a target clearance: one tight shell paired with one standard shell halves the change, to 0.0125 mm (0.0005 in). The thicker shell goes in the most heavily loaded position, which on a connecting rod is the upper half.

Final oil clearance is the engine builder's responsibility. Measure the assembled bearing bores before you commit, and never polish the bearing surface to change it.

Not sure this suits your car? Ask us before ordering; we would rather check the fitment than process a return.

Warranty

Contact us with your order number if you have any problem with your part.

FAQ

Is this an undersize bearing?

No. It is a clearance grade for a crankshaft at standard journal size. If your crankshaft has been reground undersize, this is the wrong part.

Who is it for?

A build where you want a tighter oil film than standard, or a crankshaft that measures a whisker under standard from ordinary wear or a light polish, where the thicker shell brings clearance back into specification without a regrind.

Can I mix it with standard shells?

Yes. One tight shell paired with one standard shell halves the change, to 0.0125 mm (0.0005 in). The thicker shell goes in the upper half of the connecting rod, the most heavily loaded position.

Are main bearings included?

No. This is a rod bearing set only.



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)