ARP

ARP Pro Series Main Stud Kit - Hyundai i30 N / Veloster N / Elantra N / Kona N 2.0T

  • Sale
  • $255.99 CAD
  • Regular price $404.90 CAD
Shipping calculated at checkout.


IN STOCK at our distributor as of 5 November 2026

These are MAIN studs, for the bottom end. They are not head studs and not cam tower studs: both of those are separate ARP kits and we list them separately.

Fits: Hyundai i30 N 2018 on, Veloster N 2019-2022, Elantra N 2022-2026 and Kona N 2022-2023: 2.0L Theta II turbo, five main bearings. Ten studs, two per main cap.

What this is

The ARP Pro Series Main Stud Kit: ten screw-in main cap studs with twelve-point nuts, replacing the factory main cap bolts on the 2.0 litre Theta II turbo block. Studs clamp the main caps far more consistently than stretch bolts, which is what lets the bottom end hold up to raised boost and power.

ARP main stud kit for the Hyundai 2.0T Theta II: ten black studs, ten twelve-point flanged nuts and a pack of ARP Ultra-Torque lubricant

Design

The 10 main studs are ARP2000 alloy steel, which ARP rates at 220,000 psi, and they come with 10 flanged 8740 chrome moly twelve-point nuts. The thread is M10 x 1.25, the stud ends have broached hex sockets for hand-tight installation, and the finish is black oxide. There are no separate washers: the nuts are flanged.

Worth knowing: most sellers advertise this kit as 8740 chromoly at 200,000 psi. Per ARP's own release that is wrong. The studs are ARP2000 at 220,000 psi and it is only the nuts that are 8740.

Features

  • 10 main studs in ARP2000 alloy steel, which ARP rates at 220,000 psi
  • 10 flanged 8740 chrome moly twelve-point nuts; no separate washers
  • M10 x 1.25 thread
  • Broached hex socket ends for hand-tight installation
  • Black oxide finish
  • Ten studs, two per main cap, for the five main bearings
  • A half-ounce pack of ARP Ultra-Torque fastener assembly lubricant included

Installation notes

Plan for ARP's installation requirement. In ARP's own words: when changing from factory fasteners to high strength fasteners, clamping force and tolerances will change, so it is necessary to check the main bearing bores for size and out-of-round after the studs are installed, and align hone the block if necessary.

The studs themselves go in hand tight and need no machining to fit. Torque in three equal steps to 70 ft-lbs using the supplied lubricant.

Warranty

Contact us with your order number if you have any problem with your part.

FAQ

Are these head studs?

No. These are MAIN studs, for the bottom end. They are not head studs and not cam tower studs; both of those are separate ARP kits and we list them separately.

Will my block need machine work?

The studs go in hand tight and need no machining to fit, but ARP says to check the main bearing bores for size and out-of-round after the studs are installed, and align hone the block if necessary.

What are the studs made of?

ARP2000 alloy steel, which ARP rates at 220,000 psi. Only the nuts are 8740 chrome moly.

Not sure this suits your car?

Ask us before ordering. We would rather check the fitment than process a return.



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)