ON ORDER
Note for North American buyers: the i20 N is not sold in Canada or the United States at all. There is no North American equivalent of this car, and this part suits nothing in the Hyundai range offered here.
Fits: Hyundai i20 N, 2021 onward, 1.6. That is the single application Forge lists for this intercooler, and Forge states no gearbox restriction for it. Replaces the OEM intercooler.
What this is
Forge Motorsport worked up this intercooler for the i20 N from its larger i30 N cooler, scaling the same bar-and-plate approach down to the smaller car. Against the OEM unit it replaces, Forge lists a 113% gain in core volume and over 57% more frontal surface area, with the Forge item weighing 9.65kg next to the original's 3.7kg.

Design
The core is bar-and-plate rather than tube-and-fin. Flow was opened up at both ends, the hot side going from 50mm to 60mm and the cold side from 50mm to 63mm, feeding high-flow cast end tanks shaped through CAD and CFD work with a divider on the turbo side so the whole stepped core is used.
Features
- Bar-and-plate core construction, not tube-and-fin
- Forge quotes a 113% increase in core volumetric capacity and over 57% more frontal surface area than OEM
- High-flow cast end tanks developed with CAD and CFD, with a turbo-side internal divider so the full stepped core is used
- Hot-side inlet/outlet enlarged from 50mm to 60mm, cold side from 50mm to 63mm
- Weighs 9.65kg against the OEM cooler's 3.7kg, per Forge's figures
- Direct replacement for the OEM intercooler
- Forge's own dyno testing recorded a maximum intake temperature of 32 C against 44 C on the OEM cooler
- Front bumper has to come off to fit it, but no cutting of the car is required

Installation notes
Fitting calls for the front bumper to come off but no cutting of the car, and the kit arrives with the hardware and instructions needed to do the job. It is a direct replacement for the OEM intercooler. We recommend installation by a qualified technician.

Warranty
Forge Motorsport gives the original purchaser a limited lifetime warranty against manufacturing defects. The cover is not transferable, the finish is not covered, and incorrect installation, modification or acidic cleaners void it. Contact us with your order number if you need to make a claim.
FAQ
Will it fit an i30 N, Veloster N or Elantra N?
No. This cooler is built around the i20 N's smaller front end and does not fit the i30 N in either pre-facelift or Mk3.5 facelift form, nor the Veloster N or Elantra N.
How much cooler does it run?
Forge's own dyno testing recorded a maximum intake temperature of 32 C against 44 C on the OEM cooler.
Do I have to cut anything to fit it?
No. The front bumper has to come off, but no cutting of the car is required.
Is shipping free?
FREE shipping on orders over $400 CAD (within Canada Only).