ON ORDER
Fits: Hyundai i30 N, Mk3.5 2021- Facelift. Forge also lists the Hyundai Veloster N 2021- (Facelift) under compatible vehicles for this part.
What this is
This is Forge Motorsport's front-mount intercooler for the facelifted Mk3.5 i30 N. It carries over the design Forge developed for the earlier Mk3 car with a few changes to suit the revised bodywork, and Forge points out that the facelift turbocharger runs more boost and flows more air, which makes the restrictive factory cooler more of a limit than it was before.
Note for North American buyers: the i30 N and i30 Fastback N are not sold in Canada or the United States, so in this market the relevant car for this part is the facelift Veloster N.

Design
By Forge's figures the bar-and-plate core holds over 129% more volume and presents over 71% more frontal area than the standard unit, fed through high-flow cast end tanks with a divider on the turbo side. The inlet and outlet grow to 65mm, a 64mm hot-side hard pipe replaces the 50mm original, and a fabricated duct guides air through the core.
Features
- Bar-and-plate core construction, not tube-and-fin
- Forge quotes over 129% more core volume and over 71% more frontal surface area than the stock cooler
- High-flow cast end tanks developed with CAD and CFD, with a turbo-side internal divider so the full stepped core is used
- Fabricated ducting system integrated into the design to route air through the core
- Inlet and outlet enlarged to 65mm, which Forge rates at 27% more volume than stock
- Supplied with a 64mm hot-side hard pipe in place of the 50mm factory pipe
- Black textured powder-coat finish on both the intercooler and the boost pipe
- Forge's own dyno testing recorded 24°C intake temperature against 48°C on the factory cooler

Installation notes
This is a facelift-specific part and will not go onto a pre-facelift Mk3: it does not fit the pre-facelift Mk3 i30 N of 2017-2020, which takes Forge's separate pre-facelift cooler instead. The fitting instructions are shared with Forge's facelift Veloster N cooler.
Forge states no gearbox restriction on this part and does not call out DCT separately; for the facelift Veloster N, where DCT coverage is spelled out, Forge has a dedicated part. We recommend installation by a qualified technician.

Warranty
Forge Motorsport gives the original purchaser a limited lifetime warranty against manufacturing defects on this intercooler when it is bought from Forge or an authorized dealer and left unmodified; acidic cleaners void the cover, and the powder-coated finish is not covered. Contact us with your order number if you need to make a claim.
FAQ
Does it fit the Veloster N?
Forge also lists the Hyundai Veloster N 2021- (Facelift) under compatible vehicles for this part. It does not call out DCT separately here; for the facelift Veloster N with DCT, Forge has a dedicated part.
Does it fit the pre-facelift i30 N?
No. It does not fit the pre-facelift Mk3 i30 N of 2017-2020, which takes Forge's separate pre-facelift cooler.
How much cooler does it run?
Forge's own dyno testing recorded 24°C intake temperature against 48°C on the factory cooler.
Is shipping free?
FREE shipping on orders over $400 CAD (within Canada Only).