ON ORDER
Fits: Hyundai i30 N Mk3 2017-2020, including Fastback. Forge states the kit fits pre- and post-facelift cars within that range but is not compatible with the DCT (automatic) version, for which it points to a separate kit.
What this is
Forge's i30 N oil cooler kit adds a twin-pass front-mounted core without removing anything: the factory oil-to-water cooler stays where it is, so the added core works alongside it rather than replacing it. A laser-cut aluminium bracket hangs the cooler off the car's crash bar, and double-braided AN-8 lines run back to a Forge sandwich plate at the filter housing.

Design
The Forge aluminium sandwich plate carries a thermostat that stays shut until oil reaches 85 degrees C, so the engine still warms up normally before the extra core starts doing anything. The twin-pass core has a black finish and hangs off the i30 N crash bar on a laser-cut aluminium bracket, connected to the sandwich plate by two double-braided AN-8 oil lines.
Features
- Twin-pass oil cooler core, black finish
- Retains the factory oil-to-water cooler rather than replacing it
- Forge aluminium sandwich plate with a thermostat that opens at 85 C
- Laser-cut aluminium bracket that mounts to the i30 N crash bar
- Two double-braided AN-8 oil lines
- M20 x 1.5 adaptor, 4x M6x20 fasteners, 4x M6 washers, 4x M6 rubber riv nuts
- All fixings required for the installation are supplied

Installation notes
All fixings required for the installation are supplied. The bracket mounts to the crash bar and the sandwich plate fits at the filter housing. Forge notes the cooler must go in the orientation shown, since fitting it inverted can trap air in the system. We recommend installation by a qualified technician.

Warranty
Forge Motorsport gives the original purchaser a limited lifetime warranty against manufacturing defects. The cover is not transferable, the finish is not covered, and incorrect installation, modification or acidic cleaners void it. Contact us with your order number if you need to make a claim.
FAQ
Does it replace the factory oil cooler?
No. The factory oil-to-water cooler stays where it is, and the added core works alongside it.
Will my engine still warm up normally?
Yes. The thermostat in the sandwich plate stays shut until oil reaches 85 degrees C, so the engine still warms up normally before the extra core starts doing anything.
Which i30 N does it fit?
The i30 N Mk3 2017-2020, including Fastback, but not the DCT (automatic) version. It is not the kit for an i30 N MK3.5 facelift (Forge lists a separate kit for that, and for DCT cars) or an Elantra N, and Forge does not list the Veloster N under this part, although the Veloster N appears in some of its image file names.
Is shipping free?
FREE shipping on orders over $400 CAD (within Canada Only).