ON ORDER at our distributor as of 5 November 2026
You are buying four rods. The photographs show a single rod, because that is how Manley shoot them.
Fits: Hyundai i30 N 2018 on, Veloster N 2019-2022, Elantra N 2022-2026 and Kona N 2022-2023: 2.0L Theta II turbo.
What this is
Manley Turbo Tuff forged I-beam connecting rods, a full set of four: one engine's worth. Forged 4340 steel, cut to the factory rod length and the factory big-end journal size, so they drop into a standard bottom end and run standard-size rod bearing shells while taking far more boost than the cast factory rods. Manley rates them at roughly 1000-plus horsepower in a four-cylinder.

Design
The factory rod in this engine measures 146 mm centre to centre; this one is 146.13 mm, on the same 22 mm pin and the same 51 mm big end. That is why it drops in. We sell it for these cars on that basis and on our own engine-building experience with them, and we are happy to check it against your exact engine before you order.
From Manley: forged from aircraft-quality vacuum-degassed 4340 steel, shot peened to military specification after machining, and 100 percent individually magnafluxed.
Features
- Set of 4 rods
- I-beam design, Turbo Tuff series
- Centre-to-centre length 5.753 in (146.13 mm)
- Big end bore 2.008 in (51.003 mm), which is stock
- Big end width 0.860 in (21.84 mm)
- Wrist pin 22 mm (0.866 in)
- Average weight 630 g per rod
- Supplied with 3/8 in cap screws, torqued to 60 ft-lbs or by a stretch of 0.0058-0.0062 in.
- Aircraft-quality vacuum-degassed 4340 steel, shot peened to military specification after machining, 100 percent individually magnafluxed
- Manley rating: roughly 1000-plus horsepower in a four-cylinder

Installation notes
The rods drop into a standard bottom end and run standard-size rod bearing shells. The supplied 3/8 in cap screws are torqued to 60 ft-lbs or by a stretch of 0.0058-0.0062 in. We recommend installation by a qualified technician.
Emissions notice, in Manley's words: this product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-pollution-controlled vehicles only.
Not sure this suits your car? Ask us before ordering: we would rather check the fitment than process a return.
Warranty
Manley Performance warrants its products against defects in material and workmanship for 30 days from the date of original purchase, and the warranty is not transferable. As performance parts, these rods are covered for manufacturing defects only, not for wear or breakage. Contact us with your order number if you need to make a claim.
FAQ
How many rods do I get?
Four, one engine's worth. The photographs show a single rod, because that is how Manley shoot them.
Will they drop into my engine?
They are cut to the factory rod length and the factory big-end journal size: 146.13 mm centre to centre against the factory 146 mm, on the same 22 mm pin and the same 51 mm big end. We are happy to check them against your exact engine before you order.
How much power will they take?
Manley rates them at roughly 1000-plus horsepower in a four-cylinder.
When can I get them?
They are ON ORDER at our distributor as of 5 November 2026. Ask us for a lead time before you plan a build around them.