IN STOCK at our distributor as of 5 November 2026
Fits: Universal. Machine polish for the paintwork of any vehicle.
What this is
Sonax Profiline Cut & Finish, 250 ml: a two-in-one machine polish that combines cutting ability with a finishing gloss, so moderate swirls and light scratches come out and the paint is left ready to seal in one pass.
Profiline is Sonax's professional range, formulated for machine use.

Design
Sonax makes it as a single-stage, highly abrasive polish for quickly removing defects such as nibs, spray paint mist and sanding marks after refinishing, including sanding marks from P1500 paper, while leaving a high degree of gloss. It rates cut 5 and gloss 5 on Sonax's scale, stays workable for a long time, wipes off easily, is silicone free and gives off little dust. Made in Germany: Sonax has built car care products at Neuburg an der Donau for more than sixty years and is the market leader in Germany.
Features
- 250 ml
- Two-in-one machine polish: cutting ability with a finishing gloss
- Moderate swirls and light scratches come out, and the paint is left ready to seal in one pass
- Sonax rating: cut 5, gloss 5
- Removes nibs, spray paint mist and P1500 sanding marks after refinishing
- Long working time and easy wipe-off
- Silicone free, low dust
- Profiline: Sonax's professional range, formulated for machine use
- Made in Germany
How to use
Sonax recommends a variable-speed rotary polisher with a hard or medium foam pad. It can be used with an orbital machine if the scratches allow it or the sanding marks are P2000 or finer. If the paint needs sanding first, use P1500 grit or finer.
Start with the machine tilted slightly, then keep the pad flat, and work in several short polishing cycles, especially on fresh paint. Wipe off the residue with a Sonax Microfibre Cloth soft touch. Depending on the colour, you can then polish to a high gloss with Sonax Profiline Perfect Finish. Clean the pads regularly and never use different polishes on one pad. Do not use it on hot surfaces, and protect it from frost.
FAQ
Is it a one-step polish?
Yes. It combines cutting ability with a finishing gloss, so moderate swirls and light scratches come out and the paint is left ready to seal in one pass. Depending on the colour, Sonax says you can follow it with Profiline Perfect Finish for a high gloss.
What machine should I use?
Sonax recommends a variable-speed rotary polisher with a hard or medium foam pad. It can be used with an orbital machine if the scratches allow it or the sanding marks are P2000 or finer.
How much does it cut?
Sonax rates it cut 5 and gloss 5, and it removes sanding marks from P1500 paper.