Eibach

Eibach Lowering Spring and Sway Bar Kit - Kia Stinger

  • Sale
  • Regular price $1,521.46 CAD
Shipping calculated at checkout.


ON ORDER: available to order in

Fits: Kia Stinger (fitment per the Marcor Automotive catalogue). Eibach lists this kit for the 2018-2023 Kia Stinger GT 3.3L, AWD and RWD. For the Stinger 2.0L and 2.5T, Eibach lists a different kit instead.

What this is

An Eibach combined lowering spring and sway bar kit for the Kia Stinger: Eibach calls it the PRO-PLUS KIT. It combines Eibach's PRO-KIT lowering springs with its ANTI-ROLL-KIT front and rear stabilizer (sway) bars for a tuned suspension system. In Eibach's words: PRO-KIT + ANTI-ROLL-KIT = PRO-PLUS, performance springs and sway bars for superior handling for the serious enthusiast.

Eibach Pro-Plus kit for the Kia Stinger: four black lowering springs and red front and rear sway bars with bushings

Design

The kit contains four PRO-KIT springs (two front, two rear), a front sway bar and a rear sway bar, each bar with its Eibach hardware, bushings and brackets. The front sway bar is tubular and 2-way adjustable. Eibach's lowering figures for this kit are 1.4 in front and 1.2 in rear on the 2018-2023 Stinger GT 3.3L AWD, and 0.8 in front and 0.8 in rear on the RWD car.

Features

  • PRO-KIT lowering springs, set of 4 (2 front, 2 rear)
  • ANTI-ROLL-KIT front and rear sway bars
  • Front sway bar: tubular and 2-way adjustable
  • Lowering on the Stinger GT 3.3L AWD: 1.4 in front, 1.2 in rear (Eibach)
  • Lowering on the Stinger GT 3.3L RWD: 0.8 in front, 0.8 in rear (Eibach)
  • Stop quicker and corner faster (Eibach)
  • Bolts on; set the alignment after installation

Installation notes

Eibach's instructions say only qualified mechanics experienced in the installation and removal of suspension components should do this installation. The springs go in with the Eibach logo right side up, re-using the original spring isolators, dampers and tubing. Eibach's spring instructions for this kit (written for the Stinger GT 3.3L AWD) call for trimming the factory bump stops: 30mm off the bottom of the front bump stops and 20mm off the bottom of the rear bump stops.

After installation, set the wheel alignment and check the brake line clearance, the ABS sensors and, with aftermarket wheels or tires, the tire and fender clearance. Eibach's bar instructions give a softest and a firmest setting: the softest for rain, slick or rough roads and more comfort, the firmest for dry, smooth roads and tracks. Do not use the firmest setting on wet or slick roads. Eibach does not guarantee fitment, height or warranties on unlisted applications.

Warranty

Eibach gives a 5-year limited warranty against factory defects on its Pro-Kit springs and Anti-Roll-Kit sway bars (1 year on bushings and other wear parts), for the original purchaser with proof of purchase who still owns the vehicle. Parts must be installed by a qualified, licensed mechanic, and racing use, misuse and overloading are not covered. Contact us with your order number if you need to make a claim.

FAQ

Which Stinger does this kit fit?

Eibach lists it for the 2018-2023 Kia Stinger GT 3.3L, AWD and RWD. For the Stinger 2.0L and 2.5T, Eibach lists a different kit.

How much does it lower the car?

Eibach gives 1.4 in front and 1.2 in rear on the Stinger GT 3.3L AWD, and 0.8 in front and 0.8 in rear on the RWD car.

What is in the kit?

Four PRO-KIT lowering springs (two front, two rear) plus a front and a rear sway bar with their hardware. The front bar is tubular and 2-way adjustable.

Is it in stock?

It is on order and available to order in.



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)