Whiteline

Whiteline Front Control Arm Bushings

  • Sale
  • Regular price $203.99 CAD
Shipping calculated at checkout.


IN STOCK

Fits: Hyundai Elantra GT Sport, Hyundai Elantra GT N Line, Hyundai Elantra Sport, Hyundai Veloster Turbo 2, Kia Forte GT, Kia Forte5, Veloster N, Kona N and Elantra N. All confirmed fitment.

What this is

Whiteline's front anti lift bushing kit for the front lower control arms. Hard acceleration and braking allow the lower control arms to move around significantly, causing axle tramp, poor launch and poor power delivery. Due to the dynamic nature of these lower control arm bushings, this also alters the bump steer characteristics, effectively generating significant 'toe in' under hard braking.

Replacing the rear caster bushing with a low compliance bushing alters the dynamic effect within the bump steer, so Whiteline has cleverly packaged these items together to give you additional camber during turn in (achieved through the offset in the low compliance bushing), improved anti dive geometry and neutralized bump steer correction. This kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering.

Combine key selected Whiteline bushings with Whiteline sway bar, alignment and bracing products for the ultimate street performance package! #gripactivated #Project22

Whiteline front anti lift control arm bushings with two gold spacers

Design

Whiteline's engineered "Synthetic Elastomer" bushings feature the quality ride of rubber at lower speeds, and at higher speeds they react under cornering, accelerating and braking loads, for chassis control and improved handling. The advanced synthetic elastomer characteristics ensure superior elasticity, memory and outright durability for all forms of driving applications, and the formulation boasts resistance to oil, grease, ozone and weathering.

Whiteline's installation guide describes the kit as 2 elastomer surrounded spherical bushings and 2 spacers of 6mm, with the bushing offset for increased caster. Whiteline rates the kit as performance alignment that suits the steel arm and adds +0.5 deg caster plus anti-lift.

Features

  • Front anti lift bushing kit
  • Additional camber during turn in, through the offset in the low compliance bushing
  • Improved anti dive geometry and neutralized bump steer correction
  • Tightens up the front suspension: more nimble and responsive during acceleration, braking and cornering
  • Adds +0.5 deg caster plus anti-lift; suits the steel arm (Whiteline)
  • Synthetic elastomer: superior elasticity, memory and outright durability, resistant to oil, grease, ozone and weathering
  • Lubricant: supplied with extreme pressure molybdenum disulphide (LM) based grease (where required) for extended life
  • Installer friendly: designed with the installer in mind, reducing the need for specialised skills, tools and equipment
  • Black: the neutral appearance favoured by restorers and racers
  • Kit: 2 bushings and 2 spacers (Whiteline)

Whiteline anti lift bushings, face and side view, with gold spacers

Installation notes

Installation Guide: Download Now

Whiteline quotes 2.5 hours to install and recommends a suspension specialist. Wheel Alignment Required? Yes.

Lubrication guide: in the majority of applications Whiteline bushings act as a flexible bearing and must be greased at the time of assembly. To gain optimum performance from Whiteline products, take the following precautions when installing:

  • Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
  • Use these hints along with any instructions provided when fitting Whiteline products. The vehicle manufacturer's manual should be used to ensure Whiteline warranty compliance.
  • Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage; any damaged components must be replaced or repaired to the vehicle manufacturer's tolerances.
  • Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. The grease is formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide, for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point. Apply it to the bores and outer flanges of all bushes and components; do not grease the outside surfaces of bushes and components.
  • Note: the major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.

Whiteline's guide says the supplied 6mm spacer can go in one of two places, depending on driver preference and driving style: on the high side it promotes better power delivery to the ground, and on the low side it promotes improved stability under brakes. Re-use all original nuts and bolts, tightened to the manufacturer's spec. A wheel alignment is required to correct the front toe setting, and the bolts should be re-checked after 100 km. We recommend installation by a qualified technician.

Whiteline diagram of the front suspension showing the lower control arm bushing position

Warranty

All Whiteline bushing kits are backed by a lifetime warranty. The vehicle manufacturer's manual should be used when fitting to ensure Whiteline warranty compliance. Contact us with your order number if you need to make a claim.

FAQ

Which cars does it fit?

The Hyundai Elantra GT Sport, Elantra GT N Line, Elantra Sport, Veloster Turbo 2, Veloster N, Kona N and Elantra N, and the Kia Forte GT and Forte5. All confirmed fitment.

What does it fix?

Lower control arm movement under hard acceleration and braking, which causes axle tramp, poor launch and poor power delivery, and the bump steer that generates 'toe in' under hard braking. It also gives additional camber during turn in and improved anti dive geometry.

Which way should the spacer go?

Whiteline's guide says it depends on driving style: on the high side it promotes better power delivery to the ground, on the low side improved stability under brakes.

Do I need a wheel alignment?

Yes. A wheel alignment is required to correct the front toe setting.


Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Reviewer avatar
Aaron K
Whiteline Front LCA Bushings

I installed these with the Whiteline ball joints and bushings in new control arms on my 2018 Elantra GT Sport. Tightened up the front end and feels much more engaging to drive. I also had a slight pull to the left under heavier braking. Gone now after all new bushings. Improved feedback in the wheel. Thing is on rails now.

J
JOSEPH RICHARDSON
Love it

Gecko street suspension lower ball joints, and the bushings = riding on rails

Very happy to hear you are enjoying the suspension!!! Thank you for your feedback!

S
Sanghoon Kim
Definitely recommended

The item shipped out quickly and the bushing improved lots of the suspension feelings. Definitely recommend it.

T
Tristan Cholewicki
Worth the effort.

I’ll start off by saying these are a little more work intensive to put in, only for the reason you have to have the OEM bushings pressed out and the new ones pressed in, but the geometry changes the game! Whiteline knows what they are doing with these subtle changes. The car is night and day.

R
Ryan B
Slot car feeling

OMG talk about my car being a slot car. With the combination of these bushings, the lower control arm front bushings and the lower engine mount bushings. My car is on rails. Made me more confident when autocrossing. Definitely 10/10