ON ORDER
Professional engine build required; install pistons and rods together.
Fits: 2023+ Toyota GR Corolla (GZEA14H) and GR Yaris (GXPA16) with the G16E-GTS engine; it is an internal engine part shared by both cars. Stock bore and displacement. HKS part number 21004-AT011.
What this is
This high-compression version of HKS's G16E kit combines billet Triple Tumble pistons with reinforced I-beam connecting rods. The crown design generates an extra tumble flow on the intake side as the piston rises, spreading the flame to resist knock and allow a higher compression ratio for sharper response.
Forged A2618 construction, a titanium-coated top ring, and WPC-finished rods handle the heat and load of a serious build. The high-compression spec is intended for high-octane fuel.

Design
The pistons are HKS BCD (Bridge Concept Design) 'Triple Tumble' high-compression pistons in forged A2618, at the stock 87.5mm bore and 352g each. The crown creates an extra tumble flow on the intake side as the piston rises, so the flame spreads quickly and knock is resisted at a higher compression ratio. Nickel plating above the top ring, a titanium-coated top ring and a 2-layer anti-seize coating handle heat and wear, and three piston cooling oil jets deliver cooling oil precisely for effective cooling. The rods are machined nickel-chrome I-beam conrods, about 25% stronger than stock, with a WPC finish and a 24mm piston pin.
Features
- Forged A2618 BCD 'Triple Tumble' high-compression pistons
- Bore 87.5mm (stock displacement), 352g per piston
- Machined nickel-chrome I-beam conrods, ~25% stronger than stock
- 24mm piston pin
- Titanium-coated top ring; nickel plating above top ring
- 2-layer anti-seize coating
- Three piston cooling oil jets
- WPC-finished rods
- HKS supplies the kit as piston kit 21003-AT009, conrod set 23004-AT003 and piston pin set 21005-AK011
Installation notes
Professional engine build required. Install the pistons and rods together: HKS notes that installing them separately may cause imbalance and vibration. The high-compression spec is intended for high-octane fuel.
Warranty
HKS gives the original purchaser a 1-year warranty against defects in materials and workmanship on HKS products. Contact us with your order number if you need to make a claim.
FAQ
Does it change the bore or displacement?
No. The pistons are 87.5mm, the stock bore, so displacement stays stock.
What fuel does it need?
The high-compression spec is intended for high-octane fuel.
Can I install the pistons without the rods?
Install the pistons and rods together. HKS notes that installing them separately may cause imbalance and vibration.
Is shipping free?
FREE shipping on orders over $400 CAD.