ON ORDER
For full engine builds only: professional assembly and balancing required. Install pistons and rods as a set to avoid imbalance/vibration.
Fits: 2023+ Toyota GR Corolla (GZEA14H) and GR Yaris (GXPA16), G16E-GTS. A shared G16E-GTS engine internal: it fits the GR Corolla and the GR Yaris. HKS part number 21004-AT007.
What this is
Built to cure the G16E-GTS's known bottom-end weak point, this Step 3 piston and connecting rod package pairs HKS's Bridge Concept Design (BCD) forged pistons with machined nickel-chrome I-beam rods that are about 25% stronger than stock. Supplied together, the pistons and rods preserve the factory 50% weight balance, so the three-cylinder stays as smooth as OEM. A2618 piston alloy, three cooling oil jets and WPC-treated rods make it a durable foundation for a built, high-boost G16E.
HKS lists this kit, 21004-AT007, as the BCD Piston + Conrod Kit G16E Low-Comp Step 3: it keeps the stock 87.5mm bore and uses a 24mm piston pin.

Design
The pistons are forged from A2618 aluminum, a high-temperature-resistant alloy that HKS uses for thinner walls and lighter weight. The bridge-shaped BCD structure raises rigidity while cutting weight, and the crown shape is kept as close as possible to stock. Nickel plating above the top ring slot improves knock and wear resistance, a 2-layer coating improves anti-seizing and reduces friction, and the piston leads the cooling oil from the three oil jets to the proper location for effective cooling.
The conrods are machined nickel-chrome I-beam rods, ~25% stronger than stock, made for the 24mm piston pin and finished with a WPC treatment for durability. Because the pistons and rods are supplied together, the weight balance ratio stays at the factory 50%, and HKS says vibration damping is equivalent to stock.
Features
- Forged A2618 aluminum BCD pistons
- Bore 87.5mm (stock), stroke 89.7mm, 1,618cc
- Compression ratio approx. 10.4
- Machined nickel-chrome I-beam conrods, ~25% stronger than stock
- 24mm piston pin
- Nickel plating above top ring + 2-layer low-friction coating
- WPC-treated rods
- Pistons and rods keep the factory 50% weight balance
- Pistons lead the cooling oil from the three oil jets to where it is needed
Installation notes
For full engine builds only: professional assembly and balancing required. Install pistons and rods as a set to avoid imbalance/vibration. The same kit fits the GR Corolla and the GR Yaris, since both use the G16E-GTS.
Warranty
HKS gives the original purchaser a 1-year warranty against defects in materials and workmanship. Claims go through the seller with the original purchase order, photos and video. Contact us with your order number if you need to make a claim.
FAQ
Is this the high- or low-compression kit?
HKS lists 21004-AT007 as the Low-Comp Step 3 kit. It keeps the stock 87.5mm bore, 89.7mm stroke and 1,618cc, with a compression ratio of approx. 10.4.
Why are the pistons and rods sold together?
Supplied together, they keep the factory 50% weight balance, so the three-cylinder stays as smooth as OEM. Install pistons and rods as a set to avoid imbalance/vibration.
Can I fit it myself?
It is for full engine builds only: professional assembly and balancing are required.
Is shipping free?
FREE shipping on orders over $400 CAD.