ON ORDER
Professional engine build mandatory; cannot run the standard balancer shaft.
Fits: 2023+ Toyota GR Corolla (GZEA14H) and GR Yaris (GXPA16) with the G16E-GTS engine; these are internal engine parts shared by both cars. Low-compression spec for high-boost builds. HKS part number 21004-AT010.
What this is
The low-compression sibling to HKS's stroker range, this 1.75L L-Comp Step 3 full kit is built for big-turbo, high-boost GR Corolla engines. A billet full-counter crank stretches the stroke to 95.7mm for 1,746cc, while the lower-compression 88mm forged pistons give the headroom to run serious boost safely.
It ships as a complete, balanced bottom end with crank, rods, forged pistons, rings, and pins.

Design
The billet full-counter crankshaft lengthens the stroke from the stock 89.7mm to 95.7mm, and the 88.0mm forged A2618 pistons take displacement from 1,618cc to 1,746cc. The pistons are the lower-compression type, for high-boost builds. The conrods are SNCM I-beam rods with a WPC finish on 24mm pins. The balancer shaft is deleted, so the kit cannot be used with the stock balancer shaft.
Features
- Complete stroker kit: pistons, conrods, crankshaft, rings, pins
- Displacement 1,746cc (from 1,618cc)
- Bore 88.0mm, stroke 95.7mm
- Compression ratio (HKS figures): 10.2 with the stock head gasket, 10.1 with a 0.8mm (0.79mm) HKS head gasket (23002-AT003, or Super Cooling Pro 23002-AT007), 9.9 with a 1.0mm (1.04mm) HKS head gasket (23002-AT006, or Super Cooling Pro 23002-AT008)
- Forged A2618 pistons, 314g each (HKS figure)
- Billet full-counter crank
- SNCM I-beam WPC rods
- 24mm pins
- Balancer shaft deleted: cannot be used with the stock balancer shaft
Installation notes
Professional engine build mandatory. The kit cannot run the standard balancer shaft. Choose the head gasket to suit the compression ratio you want; HKS's figures for each gasket are listed above.
Warranty
HKS gives the original purchaser a 1-year warranty against defects in materials and workmanship on HKS products. Contact us with your order number if you need to make a claim.
FAQ
What displacement does it give?
1,746cc (from 1,618cc), with an 88.0mm bore and a 95.7mm stroke.
Can I keep the stock balancer shaft?
No. The balancer shaft is deleted, and the kit cannot be used with the stock balancer shaft.
What compression ratio will I have?
HKS lists 10.2 with the stock head gasket, 10.1 with a 0.8mm (0.79mm) HKS head gasket and 9.9 with a 1.0mm (1.04mm) HKS head gasket.
Is shipping free?
FREE shipping on orders over $400 CAD.