ON ORDER
Fits: 2023+ Toyota GR Corolla (GZEA14H) and GR Yaris (GXPA16) with the stock-displacement G16E-GTS engine; a shared G16E-GTS engine internal. HKS part number 21003-AT009.
What this is
High-compression Triple Tumble pistons for the stock-displacement G16E-GTS. HKS's crown design creates an added intake-side tumble flow that improves knock resistance and lets the engine run a higher compression ratio for crisper response. Forged from A2618 alloy with a titanium-coated top ring and three cooling oil jets, supplied as a piston kit with rings and pins.

Design
These are forged A2618 BCD (Bridge Concept Design) 'Triple Tumble' high-compression pistons. The crown creates an added intake-side tumble flow that improves knock resistance and allows a higher compression ratio. The area above the top ring is nickel plated, the top ring is titanium coated, a 2-layer anti-seize coating is applied, and the design makes use of the engine's three piston cooling oil jets. The bore is 87.5mm (stock displacement), each piston weighs 352g, and the pistons take a 24mm piston pin.
Features
- Forged A2618 BCD 'Triple Tumble' high-compression pistons
- Bore 87.5mm (stock displacement), 352g per piston
- Nickel plating above top ring
- Titanium-coated top ring
- 2-layer anti-seize coating
- Three piston cooling oil jets
- For 24mm piston pin
- Supplied as a piston kit with rings and pins
Installation notes
High-compression spec for high-octane fuel; professional engine build required. Pair with HKS Step 3 conrods (HKS CONROD SET G16E STEP3, 23004-AT003). HKS advises installing the piston kit and connecting rods as a set for best performance, as installing them separately may cause imbalance and vibrations.
Warranty
HKS gives the original purchaser a 1-year warranty against defects in materials and workmanship on HKS products. Claims are made through the seller with the original purchase order, photos and video. Contact us with your order number if you need to make a claim.
FAQ
Does this piston change displacement?
No. The bore is 87.5mm, stock displacement. It raises the compression ratio instead.
What fuel does it need?
It is a high-compression spec for high-octane fuel.
What else do I need?
HKS Step 3 conrods (23004-AT003) and a professional engine build.
Is shipping free?
FREE shipping on orders over $400 CAD.