ON ORDER
Typically a wire-transfer special order.
Fits: 2023+ Toyota GR Corolla (GZEA14H) and GR Yaris (GXPA16), G16E-GTS 1.6L turbo. Bare short block for a full engine build; stock balance shafts cannot be reused. HKS part number 23011-AT009.
What this is
Built for serious high-boost power, this fully machined 1.75L closed-deck short block stretches the G16E-GTS to 1,746cc with an 88.0mm bore and a 95.7mm stroke. HKS assembles it with High-Comp Triple-Tumble (HC-TT) pistons, Step 3 high-strength I-beam rods rated roughly 25% stronger than stock, a full-counter crankshaft machined from chrome steel, and upgraded ACL bearings. Converting the block to a closed deck braces the cylinders against deformation under extreme combustion pressure, giving big-turbo builds a rock-solid foundation. Supplied as a bare short block for a complete engine build.

Design
The block is machined to a closed deck to suppress cylinder deformation and handle high combustion pressure. Closing the deck changes the coolant flow, so HKS reworks the water jackets and adds a cooling jacket at the No. 2 cylinder, for use with its Grommet Head Gasket SUPER COOLING Pro. The deck surface is ground for flatness, the cylinders are bored for cylindricity, and the main gallery is thoroughly cleaned after machining.
Inside are HKS machined High-Comp Triple-Tumble (HC-TT) pistons with HKS's BCD bridge structure for light weight and rigidity, Step 3 high-strength machined I-beam connecting rods (~25% stronger than OEM, which raises the allowable torque), a full-counter crankshaft machined from chrome steel with its counterweights placed to reduce inertia, and ACL main and connecting-rod bearings.
Features
- Displacement: 1,746cc (stock 1,618cc)
- Bore: 88.0mm (stock 87.5mm)
- Stroke: 95.7mm (stock 89.7mm)
- HKS machined High-Comp Triple-Tumble (HC-TT) pistons
- Step 3 high-strength machined I-beam connecting rods (~25% stronger than OEM)
- Full-counter crankshaft, machined from chrome steel
- ACL main and connecting-rod bearings
- Step 3 closed-deck block
- Stock balance shafts cannot be reused
Installation notes
This is a bare short block for a full engine build, and the stock balance shafts cannot be reused. Head gasket, head studs and supporting parts required separately: HKS recommends its Grommet Head Gasket Kit SUPER COOLING Pro (23002-AT007 or 23002-AT008) and its HEAD STUDS KIT Pro (22999-AT001), and recommends HKS Racing Pro 10W50 engine oil. We recommend installation by a qualified technician.
Warranty
HKS gives the original purchaser a 1-year warranty against defects in materials and workmanship. Claims go through the seller with the original purchase order, photos and video. Contact us with your order number if you need to make a claim.
FAQ
What else do I need?
Head gasket, head studs and supporting parts are required separately. HKS recommends its SUPER COOLING Pro grommet head gasket kit (23002-AT007 or 23002-AT008) and its HEAD STUDS KIT Pro (22999-AT001).
Can I reuse the stock balance shafts?
No. Stock balance shafts cannot be reused.
How big is it?
1,746cc (stock 1,618cc), from an 88.0mm bore (stock 87.5mm) and a 95.7mm stroke (stock 89.7mm).
Is shipping free?
FREE shipping on orders over $400 CAD.