ON ORDER
Fits: 2023+ Toyota GR Corolla (GZEA14H) and GR Yaris (GXPA16), G16E-GTS 1.6L turbo. Bare low-compression short block for a full build; intended to be used with the HKS Grommet SUPER COOLING Pro head gasket. Stock balance shafts cannot be reused. HKS part number 23011-AT011.
What this is
This is the low-compression version of HKS's G16E 1.75L closed-deck short block, developed for high-boost setups that prefer a lower static compression ratio. It uses lightweight, high-rigidity BCD (bridge-construction) pistons together with Step 3 machined I-beam rods, a full-counter crankshaft and durable ACL bearings, all inside a reworked closed-deck block with optimized water jackets and an added No.2-cylinder cooling jacket. Displacement grows to 1,746cc via an 88.0mm bore and 95.7mm stroke. HKS designed it to run with their Grommet-type SUPER COOLING Pro head gasket.

Design
The block is machined to a closed deck to suppress cylinder deformation and handle high combustion pressure. Closing the deck changes the coolant flow, so HKS reworks the water jackets and adds a cooling jacket at the No.2 cylinder, assuming the use of its Grommet Head Gasket SUPER COOLING Pro. The deck surface is ground for flatness, the cylinders are bored for cylindricity, and the main gallery is thoroughly cleaned after machining.
The pistons are HKS machined low-comp BCD pistons. The Step 3 high-strength machined I-beam rods are ~25% stronger than OEM, which raises the allowable torque. The full-counter crankshaft is machined from chrome steel, with its counterweights placed to reduce inertia, and the main and connecting-rod bearings are ACL.
Features
- Displacement: 1,746cc (stock 1,618cc)
- Bore: 88.0mm (stock 87.5mm)
- Stroke: 95.7mm (stock 89.7mm)
- HKS machined low-comp BCD pistons
- Step 3 high-strength machined I-beam rods (~25% stronger than OEM)
- Full-counter crankshaft, machined from chrome steel
- ACL main and connecting-rod bearings
- Closed-deck block with revised water jackets + added No.2 cylinder cooling jacket
- Reference CR with SUPER COOLING Pro gasket: 11.6:1 (0.8mm, 23002-AT007) / 11.3:1 (1.0mm, 23002-AT008)
- Stock balance shafts cannot be reused
Installation notes
This is a bare low-compression short block for a full build, and the stock balance shafts cannot be reused. It is intended to be used with the HKS Grommet SUPER COOLING Pro head gasket; HKS gives the compression ratios above as reference values with this short block. HKS recommends HKS Racing Pro 10W50 engine oil. We recommend installation by a qualified technician.
Warranty
HKS gives the original purchaser a 1-year warranty against defects in materials and workmanship. Claims go through the seller with the original purchase order, photos and video. Contact us with your order number if you need to make a claim.
FAQ
What compression ratio does it run?
HKS's reference figures with the SUPER COOLING Pro gasket are 11.6:1 with the 0.8mm gasket and 11.3:1 with the 1.0mm gasket.
Which head gasket should I use?
It is intended to be used with the HKS Grommet SUPER COOLING Pro head gasket; the added No.2-cylinder cooling jacket assumes that gasket.
Can I reuse the stock balance shafts?
No. Stock balance shafts cannot be reused.
Is shipping free?
FREE shipping on orders over $400 CAD.