HKS

SUPER SQV4 Blow off Valve

  • Sale
  • Regular price $303.00 USD
Shipping calculated at checkout.


IN STOCK

Universal fit: no adapter included.

Fits: Universal fit for turbocharged vehicles; no adapter included. HKS Super SQV4 universal assembly.

What this is

The HKS Super SQV4 is HKS's Sequential Blow Off Valve in its universal form. When you lift off the throttle it vents the excess boost pressure, using a pull-type relief design and a sequential dual valve structure that HKS says gives a broad operating range from low boost to high boost. HKS says pull-type blow off valves will work for any turbocharged vehicle, from stock to highly tuned.

It also sounds the part: Triple Fins set at the center of the funnel produce what HKS calls "Super Sound", a dynamic and aggressive sound.

HKS Super SQV4 blow off valve in silver with its triple-fin funnel, laid out with a C-clip, O-ring, two T-fittings, a vacuum filter and cable ties

Design

High Quality Aluminum Die-Cast Body. A silver-coated aluminum die-cast body that combines the ultimate in looks and durability in the engine compartment.

High Stiffness Metal Die-Cast Valve. The secondary valve main portion is made of die cast metal, for reliable operation with a beautiful look.

Triple Fin design produces "Super Sound". Triple Fins set at the center of the funnel produce a dynamic and aggressive sound. An optional special Round Fin can be purchased separately for sound tuning. HKS notes that the sound and its volume vary with the vehicle and its specification.

Pull-Type Relief Valve Operation. The Pull-Type valve operation offers more precise relief of excess boost and is compatible for a wider range of boost pressure compared to typical push-type blow off valves.

Primary Valve (Small) and Secondary Valve (Large). Lift off the throttle, and the primary valve instantly opens, quickly discharging initial excess boost pressure. The Secondary Valve combines with the Primary Valve to form the sequential dual valve structure, for optimal blow-off operation from low to high boost ranges without leaking.

Dual Valve Structure, Sequential System. At low boost ranges the Primary Valve opens, and at high boost ranges the Secondary Valve also opens, resulting in linear response and optimal blow-off operation at all boost levels.

Pull-Type blow off valves will work for any turbocharged vehicle, from stock to highly tuned. Typical push-type blow off valves require spring load settings for each vehicle specification. If the spring load setting is too low, the valve may leak under high boost and the desired boost setting may not be reached. If the spring load setting is too strong, it may not open at low boost. The Super SQV will operate under any boost pressure setting without leaking.

Features

  • Silver-coated aluminum die-cast body
  • Secondary valve main portion made of die cast metal
  • Triple Fin design in the funnel for a dynamic and aggressive "Super Sound"; optional special Round Fin sold separately for sound tuning
  • Pull-Type relief valve operation: more precise relief of excess boost, compatible for a wider range of boost pressure than typical push-type blow off valves
  • Dual Valve Structure, Sequential System: the Primary Valve (Small) opens at low boost, and the Secondary Valve (Large) also opens at high boost
  • Operates under any boost pressure setting without leaking
  • Universal fit; no adapter included
  • In the kit (HKS parts list): 1 SQV valve, 1 C-clip, 1 O-ring, 2 T-fittings (6-4-6 mm and 4-4-4 mm), 1 vacuum filter, 3 tie wraps and the instruction manual

Options

  • Add Pierburg BOV Solenoid: No or Yes. Yes adds a Pierburg BOV solenoid.

Installation notes

This is the universal valve and no adapter is included. HKS's instructions for it: remove the section of intercooler piping where the valve will go, cut a hole in it and weld on the SQV flange (sold separately), then refit the piping. Fit the O-ring in the flange groove, lock the valve on with the supplied C-clip, tapered side up, and check that the valve is held securely.

The valve must be activated by intake manifold pressure. Connect it to a source such as the factory fuel pressure regulator or a pressure fitting after the throttle body, splicing into an existing hose with one of the supplied T-fittings if needed. The vacuum filter goes between the valve and the pressure source, short end toward the valve, and the 4 mm hose is secured at the valve with a tie wrap. Hoses are not included.

To recirculate the valve back into the suction pipe, HKS sells recirculation fittings separately: one for 1" ID hose, one for 19 mm ID hose and one for 29 mm ID hose. The hose clamps, suction pipe fitting and return hose are not included. HKS also says to replace the vacuum filter regularly to keep the valve working as it should, about every 3,000-5,000 km or 3-6 months, sooner if it is dirty; the replacement filter is sold separately. We recommend installation by a qualified technician.

Warranty

HKS gives the original purchaser a 1-year warranty against defects in materials and workmanship on HKS products. Contact us with your order number if you need to make a claim.

FAQ

Does it come with an adapter?

No. It is the universal fit valve and no adapter is included. HKS's instructions call for the SQV flange (sold separately) to be welded onto the intercooler piping.

Will it hold boost on a tuned car?

HKS says pull-type blow off valves will work for any turbocharged vehicle, from stock to highly tuned, and the Super SQV will operate under any boost pressure setting without leaking.

Can I change the sound?

Yes. An optional special Round Fin can be purchased separately for sound tuning. HKS notes that the sound and its volume vary with the vehicle and its specification.

Can it be recirculated?

Yes, with an HKS recirculation fitting sold separately, for 1" ID, 19 mm ID or 29 mm ID hose.



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)