N75 Motorsports

1.6T Hyundai/Kia Titanium Downpipe Hardware

  • Sale
  • $89.99 CAD
  • Regular price $99.99 CAD
Shipping calculated at checkout.


Contact us for current availability and lead time

Fits: 1.6T Hyundai and Kia turbo cars, including the Elantra Sport, Elantra GT, Veloster Turbo, Forte GT and Kona 1.6T. Email info@n75motorsports.ca to confirm your downpipe flange before ordering.

What this is

Titanium downpipe hardware for 1.6T Hyundai and Kia turbo cars: titanium studs, 12-point titanium nuts and titanium washers that replace the OEM exhaust hardware at the downpipe-to-turbo flange. Fit this set when you install an aftermarket downpipe, such as our 1.6T high-flow downpipe, so the exhaust goes back together on fresh fasteners instead of the originals.

Owners report the quality of the studs and nuts is excellent, and that the set worked well for an aftermarket downpipe install.

N75 titanium downpipe hardware for the 1.6T: three studs, three 12-point nuts and three washers in a burnt blue finish on a white surface

Design

OEM downpipe-flange studs and nuts are prone to seizing and snapping when they come off, so swapping in a fresh set of titanium studs, 12-point nuts and washers is cheap insurance against a seized or sheared fastener partway through the job.

Each stud is double-ended with M8 x 1.25 mm thread at both ends and measures 55 mm overall. The end of the stud has a hex (Allen) broach, so it can be driven in with an Allen key.

Features

  • Titanium studs, nuts and washers
  • M8 x 1.25 mm thread on both ends of the stud
  • 55 mm overall stud length
  • 12-point titanium nuts
  • Titanium washers included
  • Sold as a set of three

Close-up of a titanium downpipe stud showing its hex-broached end, with 12-point titanium nuts stacked behind

Installation notes

Thread each stud into the downpipe-to-turbo flange, then fit a washer and a 12-point nut on top. The end of the stud has a hex (Allen) broach, so you can drive it into the flange with an Allen key and then tighten the 12-point nut down against the washer.

Warranty

Contact us with your order number if you have any problem with your part.

FAQ

What is in the set?

A set of three, with titanium studs, 12-point titanium nuts and titanium washers.

Why replace the OEM hardware?

The OEM downpipe-flange studs and nuts are prone to seizing and snapping on removal. Fitting fresh titanium hardware when you install an aftermarket downpipe avoids a seized or sheared fastener holding up the job.

Will these fit my car?

They fit 1.6T Hyundai and Kia turbo cars. Email info@n75motorsports.ca with your car and downpipe so we can confirm the flange before you order.


Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Reviewer avatar
Aaron K.

Worked great for my x-force dp install

R
Robert Gilleo
Titanium downpipe studs and nuts

The quality of these studs and nuts is fantastic, and at a cheaper cost than the AFP ones.