Contact us for current availability and lead time
Fits: the turbo-to-downpipe flange on the 2.0T Hyundai/Kia N engine (Elantra N, Veloster N, Kona N).
What this is
A set of titanium turbo-flange hardware for fitting a downpipe on the 2.0T Hyundai/Kia N platform. The set is four studs, four 12-point nuts and four washers, sold as a set of four, in a burnt-titanium finish with blue, purple and gold tones. It replaces the factory studs, nuts and washers that join the turbo turbine-housing outlet to the downpipe.
This hardware pairs with our 2.0T N downpipes: the 3.75-inch to 2.5-inch stainless catless downpipe and the 4-inch dump-pipe downpipe with 200-cell high-flow cat.

Design
This hardware is titanium rather than the steel used for typical exhaust fasteners. When you fit an aftermarket downpipe, upgrading the hardware avoids the OEM studs and nuts snapping at the turbo flange.
Each stud has M10 x 1.25 mm thread at the base and at the top, measures 55 mm overall and has a hex (Allen-key) socket broached into its tip for installation.
Features
- Set of four studs, four 12-point nuts and four washers
- Titanium fastener material and titanium finish
- Base thread size M10 x 1.25 mm
- Top thread size M10 x 1.25 mm
- Overall length 55 mm
- Hex (Allen-key) socket broached into the stud tip for installation
- 12-point nuts (some batches ship with a 6-point nut)
- Washers included

Installation notes
The four studs thread into the turbo outlet flange; the hex socket in each stud tip takes an Allen key. The downpipe then mounts over the studs, held by the washers and the 12-point nuts. For product questions, email info@n75motorsports.ca.

Warranty
Contact us with your order number if you have any problem with your part.
FAQ
What is in the set?
Four studs, four nuts and four washers, sold as a set of four.
What are the thread sizes?
The top and base thread are both M10 x 1.25 mm, and the studs are 55 mm in overall length.
Which cars does this fit?
It fits the turbo-to-downpipe flange on the 2.0T Hyundai/Kia N engine: the Elantra N, Veloster N and Kona N. For the downpipe itself, see our 3.75-inch to 2.5-inch stainless catless downpipe and 4-inch dump-pipe downpipe with 200-cell high-flow cat.