ON ORDER: available to order in
Fits: Kia Stinger (fitment per the Marcor Automotive catalogue). Eibach lists it for the 2018-2023 Kia Stinger GT 3.3L AWD and RWD, the 2018-2021 Stinger 2.0L RWD and the 2020-2023 Stinger 2.5T RWD, and also for the 2022-2026 Genesis G70 3.3T RWD and 2023-2026 Genesis G70 2.5T RWD.
What this is
An Eibach PRO-SPACER wheel spacer set, 30mm, for the Kia Stinger: a pair of hub-centric spacers with the mounting hardware. Eibach says its PRO-SPACER wheel spacers provide fine tuning for precise fitment of wheels and tires, delivering increased track width and improved styling.

Design
Each spacer is 30mm thick and made from high-strength aircraft-aluminum alloy, which saves weight compared with steel wheel spacers. They are precision engineered and hub-centric for a perfect fit and wheel balance. Bolt pattern 5x114.3, center bore 67.00, thread M12x1.5. The kit includes 2 spacers and all necessary mounting hardware.
Features
- 30mm thickness, sold as a pair
- Bolt pattern: 5x114.3
- Center bore: 67.00
- Thread: M12x1.5
- Precision engineered hub-centric design for a perfect fit and wheel balance
- High-strength aircraft-aluminum alloy
- Reduced weight compared to steel wheel spacers
- Widens your stance for better handling
- Kit includes 2 spacers and all necessary mounting hardware
Installation notes
Eibach says these spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. To check: original stud length minus spacer thickness gives the excess stud length, and the cut-out in the wheel must be deeper than that. Eibach's example: a 35mm stud with a 25mm spacer leaves 10mm of excess stud length, so the cut-out should have a depth of 11mm.
Eibach does not guarantee fitment, height or warranties on unlisted applications. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.
Warranty
Eibach gives a 5-year limited warranty against factory defects on its Pro-Spacers, for the original purchaser with proof of purchase who still owns the vehicle. Parts must be installed by a qualified, licensed mechanic, and racing use, misuse and overloading are not covered. Contact us with your order number if you need to make a claim.
FAQ
Will these spacers work with my wheels?
Only if your wheels have cut-outs (facing the hub) to clear the stock studs. The cut-out must be deeper than the original stud length minus the 30mm spacer thickness.
Is the mounting hardware included?
Yes. The kit includes 2 spacers and all necessary mounting hardware.
What are the specifications?
30mm pair, bolt pattern 5x114.3, center bore 67.00, thread M12x1.5, hub-centric, high-strength aircraft-aluminum alloy.
Is it in stock?
It is on order and available to order in.