- In Stock
Industry Standard Pump
This is the industry standard water methanol injection pump and what most water methanol injection companies are using. Its commonly identified as a 1.0 gallon per minute open flow pump with a 10-11 AMP sticker rating depending on the pumps factory preset pressure bypass setting of either 200-220 psi. Its not well suited for direct port applications due to its limited flow/pressure potential. However still a great choice for many single or dual nozzle applications under the 600 horsepower mark.
Features Include:
- Pressure adjustable from 100-300 PSI
- 3/8 NPT female inlet & outlet port
- Motor turns 1400 RPM @ 12 volts
- 11 amp draw
- Built-in bypass valve
- Built-in thermal protection
- Built-in anti reverse check valve
- Built-in heat sinkon back of motor
- Heavy duty dual EPDM pump seals
- Pressure adjustable from 100-300 PSI
- Can run dry up to 1 hour without damage
- 100% methanol compatible
- Tested prior to shipping
- Made in the USA
- Weight 5.2 lbs
Flow & Horsepower Ratings @ 13.5 Volts:
- 1.1 gallons per minute openflow
- Use 12 gauge wire for power and ground
- 75 liters per hour @ 190 PSI
- 20 gallons per hour@ 190 PSI
- 1260 cubic centimeters @ 190 PSI
- Supports up to 1200-1400 horsepower - 100% water mix
- Supports up to 700-900 horsepower -50/50 water methanol mix
- Supports up to 500-600 horsepower - 100% methanol mix
Special Notes:
- Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
- Does not include pump fittings. Pump fittings are available for sale separately
- Pumps come preset at 200 PSI
- Expect 4-5 years of service if pump pressure is left at 200 PSI or below
- Running the pump over 250 PSI is not advised and will shorten pumps life
- All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump
- Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output
- Pump may be mounted vertical or horizontal
Contents Include:
- Pump (1)
Industry Standard Pump This is the industry standard water methanol injection pump and what most water methanol injection companies are using. Its commonly identified as a 1.0 gallon per minute open flow pump with a 10-11 AMP sticker rating depending on the pumps factory preset pressure bypass setting of either 200-220Industry Standard Pump This is the industry standard water methanol injection pump and what most water methanol injection companies are using. Its commonly identified as a 1.0 gallon per minute open flow pump with a 10-11 AMP sticker rating depending on the pumps factory preset pressure bypass setting of either 200-220Industry Standard Pump This is the industry standard water methanol injection pump and what most water methanol injection companies are using. Its commonly identified as a 1.0 gallon per minute open flow pump with a 10-11 AMP sticker rating depending on the pumps factory preset pressure bypass setting of either 200-220 psi. Its not well suited for direct port applications due to its limited flow/pressure potential. However still a great choice for many single or dual nozzle applications under the 600 horsepower mark. Features Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1400 RPM @ 12 volts 11 amp draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustable from 100-300 PSI Can run dry up