- In Stock
Features Include:
- Pressure adjustable from 100-300 PSI
- 3/8 NPT female inlet & outlet port
- Motor turns2200 RPM @ 12 volts
- 16.5 amperage draw
- Built-in bypass valve
- Built-in thermal protection
- Built-in anti reverse check valve
- Built-in heat sinkon back of motor
- Heavy duty dual EPDM pump seals
- Pressure adjustable from 100-300 PSI
- Can run dry up to 1 hour without damage
- 100% methanol compatible
- Tested prior to shipping
- Made in the USA
- Weight 6.2 lbs
Flow & Horsepower Ratings @ 13.5 Volts:
- 1.7 gallons per minute open flow
- 190liters per hour @ 180 PSI
- 50 gallons per hour@ 180 PSI
- 3150cubic centimeters @ 180 PSI
- Supports up to 2500-4500horsepower - 100% water mix
- Supports up to 1500-1900 horsepower -50/50 water methanol mix
- Supports up to 1200-1600 horsepower - 100% methanol mix
Special Notes:
- Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
- Use 12 gauge wire for power and ground
- Does not include pump fittings. Pump fittings are available for sale separately
- Pumps come preset at 220 PSI
- Expect 4-5 years of service if pump pressure is left at 220 PSI or below
- Running the pump over 250 PSI is not advised and will shorten pumps life
- All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump
- Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output
- Pumpmay be mounted vertical or horizontal
-
DO NOT use with Snow or AEM progressive controller. Amperage on this pump is to high.
Contents Include:
- Pump (1)
Special Notes:
- Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
- Does not include pump fittings. Pump fittings are available for sale separately
- Pumps come preset at 220 PSI
- Expect 4-5 years of service if pump pressure is left at 220 PSI or below
- Running the pump over 250 PSI is not advised and will shorten pumps life
- All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump
- Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output
- Pump may be mounted vertical or horizontal
-
DO NOT use with Snow or AEM progressive controller. Amperage on this pump is to high.
Features Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns2200 RPM @ 12 volts 16.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustabFeatures Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns2200 RPM @ 12 volts 16.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustabFeatures Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns2200 RPM @ 12 volts 16.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustable from 100-300 PSI Can run dry up to 1 hour without damage 100% methanol compatible Tested prior to shipping Made in the USA Weight 6.2 lbs Flow & Horsepower Ratings @ 13.5 Volts: 1.7 gallons per minute open flow 190liters per hour @ 180 PSI 50 gallons per hour@ 180 PSI 3150cubic centimeters @ 180 PSI Supports up to 2500-4500horsepower - 100% water mix Supports up to 1500-1900 horsepower -50/50 water methanol mix Supports up to 1200-1600 horsepower - 100% methanol mix Special Notes: Do not use with petroleum products (E85,