In Stock
Fits: Universal. An adjustable 20-120 PSI boost pressure switch for activating a water methanol injection system. This soft hose version comes with rubber tubing, barbed fittings and hose clamps.
What this is
A simple and affordable way to activate your water methanol injection system: a heavy duty billet brass adjustable boost switch from ProMeth, which calls its boost switches the highest quality in the industry. Adjustments are made via a small 1/8" allen screw (allen wrench provided) recessed in the top of the switch.

Design
The switch is made from billet brass and uses a piston diaphragm design with normally open contacts. It has a 1/8-27 NPT male port and .250" spade terminals, and the set point is adjusted with a 1/8" allen screw recessed in the top of the switch. It is a small compact design: 2.20" long by 1.0" wide.
Features
- Adjustable from 20-120 PSI
- Normally open contacts
- Made from billet brass
- 1/8-27 NPT male port
- .250" spade terminals
- Small compact design
- Polarity can be reversed
- Voltage input 12-16 VDC
- Piston diaphragm design
- 1/8" allen screw adjustment
- Can withstand up to 1200 psi
- Repeatability +/- 3% of set point
- Temperature range -20 F to 205 F
- Dimensions 2.20" long by 1.0" wide
- Dependable long life (1 million cycles)
- Contents: pressure switch (1), barbed tee fitting (1), barbed fitting (1), hose clamps (4), allen wrench (1), spade connectors (2), rubber tubing (2 ft)

Installation notes
- Switch comes preset at 40 PSI
- Switch must be used with a relay
- Polarity does not matter, switch can be wired both ways
- Adjustments are made via the small 1/8" allen screw recessed in the top of the switch (allen wrench provided)
We recommend installation by a qualified technician.

Warranty
Contact us with your order number if you have any problem with your part.
FAQ
What pressure does it come set at?
It comes preset at 40 PSI and is adjustable from 20-120 PSI with the 1/8" allen screw in the top of the switch.
Does it need a relay?
Yes. The switch must be used with a relay.
Does polarity matter?
No. Polarity does not matter; the switch can be wired both ways.
What comes in the box?
The pressure switch, a barbed tee fitting, a barbed fitting, four hose clamps, an allen wrench, two spade connectors and 2 ft of rubber tubing.