We Stock this item
Fits: Universal wideband air/fuel ratio gauge, 2 1/16th-inch (52mm), for EFI or carbureted applications and dynamometers using gasoline, methanol, ethanol, Diesel, propane or CNG; supports vehicle/system voltages up to 16V.
What this is
AEM's X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauge is built upon unique, patented 100% Digital technology (Patent 9,575,030) that makes it the fastest responding wideband air/fuel ratio controller in independent testing*.
AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced "You-Way-Go") Controllers are powerful, cost-effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.
Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.

Design
The gauge measures 2 1/16th-inch (52mm) in diameter, a common size for easy mounting, and features a modern, visually striking faceplate and a seven-segment center display. This creates the perception of a larger overall gauge. Its slim depth (less than one inch overall) and ultra-slim cup depth of .200-inches dramatically increases its application base and potential mounting locations. Locking connectors ensure a positive connection between the harnesses and gauge, and a single board design adds to its durability.
The display is user configurable via buttons on the gauge face. It allows you to change AFR values for different fuels, Lambda or O2%, change the center display to three or four digits, perform a free-air calibration if desired as the sensor ages, and change the CAN message ID when linking multiple X-Series Inline Controllers or X-Series Controller Gauges. A black bezel and black dual-faced faceplate for air/fuel and Lambda are included, and an optional silver bezel with white dual-faced air/fuel and Lambda faceplate is available. An Auto Dimming feature is included.
The gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging. AEMnet allows additional X-Series Wideband Controllers to be daisy chained together (up to 16 cylinders) for recording AFR in multiple cylinders.
X-Digital technology. X-Digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition. The controller's high-speed digital implementation ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value.
Why response time matters. Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM's Wideband Controllers with X-Digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning. Deadtime is the delay between when exhaust gas composition changes and when that change is reported by the O2 sensor. While flow of exhaust gases (transport delay) can affect deadtime, it is not the only source. Often, the sensing elements response to the gas is the largest contributor to deadtime when an engine is in high RPM under load.
When tuning an engine using wideband AFR feedback control on an inertia dyno, deadtime affects the data you are looking at because it is reported in a different operating location than when it actually occurred. This means with long deadtimes, whatever changes you make to the base fueling will likely be in the wrong location. This can be particularly dangerous to high compression and high-boost forced induction vehicles, and EFI systems that use feedback control to auto-tune.
Reducing deadtime improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM's Wideband Controllers with X-Series digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning.
Factory calibration resistor or free-air cal, it's your choice. The X-Series Wideband Gauge and X-Series Inline Controller support the popular Bosch 4.9LSU sensor and can utilize both the factory calibration resistor and free-air calibration methods**. This allows users to take advantage of the precise factory resistor calibration when a sensor is new but then allows for free-air calibrations if the user desires when the sensor ages. It's the perfect marriage of simplicity and accuracy!
Features
- Patented 100% Digital technology (Patent 9,575,030); the fastest responding wideband air/fuel ratio controller in independent testing*
- 2 1/16th-inch (52mm) diameter; slim depth of less than one inch overall and ultra-slim cup depth of .200-inches
- Seven-segment center display, switchable to three or four digits
- User configurable via buttons on the gauge face: AFR values for different fuels, Lambda or O2%, free-air calibration, CAN message ID
- Black bezel and black dual-faced air/fuel and Lambda faceplate included; optional silver bezel with white dual-faced faceplate available
- Auto Dimming
- Locking connectors and a single board design
- 0-5v and RS232 Serial Port output for feedback control and data logging
- AEMnet (CANbus) output for data logging; additional X-Series Wideband Controllers can be daisy chained (up to 16 cylinders)
- Supports vehicle/system voltages up to 16V
- Works on EFI or carbureted applications and dynamometers, with gasoline, methanol, ethanol, Diesel, propane and CNG
- Supports the Bosch 4.9LSU sensor with the factory calibration resistor or free-air calibration**
* Independently tested at 360° Product Testing (results reported on August 31st, 2015) against 17 competitors wideband UEGO Air/Fuel Controllers. AEM X-Series Inline with Bosch 4.9LSU wideband sensor and AEM X-Series Wideband UEGO AFR Gauge with Bosch 4.9LSU sensor recorded the fastest response times.
Options
- Add Hardware Face Color Change Kit: No or Yes.
Installation notes
When performing free-air calibration, please follow the procedure outlined in the instruction manual. Wideband UEGO sensors are wear items and their lifespan is determined by many factors including contamination from leaded fuels, automotive fluids, particulates, mechanical or thermal shock and from being unheated and exposed to the exhaust stream. Free-air calibration may correct drift as a sensor ages, but it is recommended that they are replaced as part of your vehicle's maintenance program.**
The calibrated resistor in the sensor's connector body is made for the exact sensor it is attached to, so do not modify the connector.
Warranty
AEM Electronics warrants its electronics products, including its gauges, for 90 days from the date of the original purchase, with repair or replacement as the remedy. The warranty is for the original purchaser; wear, improper installation, misuse, reversed polarity wiring and cosmetic damage are not covered. Contact us with your order number if you need to make a claim.
FAQ
Can I change the AEM UEGO sensor's connector?
No. There is a laser-etched, calibrated resistor in the sensor's connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor's output.
Which fuels and engines can it be used with?
It can be used on EFI or carbureted applications, and dynamometers in applications using gasoline, methanol, ethanol, Diesel, propane, and CNG. It supports vehicle/system voltages up to 16V.
Which sensor does it support, and how is it calibrated?
It supports the popular Bosch 4.9LSU sensor and can use both the factory calibration resistor and free-air calibration methods, so you can start with the factory resistor calibration and free-air calibrate later as the sensor ages.
Can I link more than one controller?
Yes. AEMnet allows additional X-Series Wideband Controllers to be daisy chained together (up to 16 cylinders) for recording AFR in multiple cylinders.