IN STOCK
Fits: Kia Stinger 3.3TT. This is a Respons TMS kit with 2 valves included. GFB lists it for the KIA Stinger 3.3T-GDI 2017-on, and also for the Genesis G70 3.3 T-GDi (2017-2020 and 2020-on).
What this is
A dual adjustable blow-off valve kit for the Kia Stinger 3.3TT: two GFB Respons TMS valves, which GFB bills as smarter than a dual port BOV. On the surface, it may look like just another dual-port blow-off valve, but the Respons is actually much more than that. Featuring GFB's patented venting bias adjustment system, the Respons allows you to precisely control how much air vents from each of the two outlets.
Why is this so important? Two key reasons. First, you can adjust how loud the blow-off sound is: recirculate all of the air for silent factory operation, vent it all to atmosphere for maximum noise, or set it ANYWHERE in between to suit your preference. Second, you get a blow-off sound WITHOUT causing stalling, backfiring, or any other BOV-related issues, even on a car with a sensitive airflow meter (MAF). Hold on, it gets better: the Respons isn't just a noise-maker. It also offers better throttle response, faster boost recovery on gearshift and unlimited boost-holding.

Design
How GFB's patented venting bias adjustment works: twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed. This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between.

Boost holding: unlike factory bypass valves, or other brand valves that require different springs for different boost levels, a GFB valve CANNOT be forced open by high boost. The balanced piston design in a GFB valve uses boost pressure on either side to cancel out the forces, so it doesn't matter how much boost you run: you can be sure a Respons valve will deliver all of it to the engine.
Throttle response and boost recovery: GFB's TMS (Turbo Management System) principle is based on an operating method that is different to all factory bypass valves. A factory bypass valve is open until required to shut; a GFB TMS valve is shut until required to open. This difference in operating methods means that the GFB valve only vents when required, and only enough air to prevent compressor surge. For example, during a gearshift it is possible to preserve a small amount of boost pressure for a short duration. Then, when the throttle is re-opened, peak boost is reached faster than if all pressure is lost (as is the case with the factory valve that remains fully open too long). Using this principle, GFB's tests show that the Respons can return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears.

Venting to atmosphere with an airflow meter: "I thought venting to atmosphere couldn't be done on a car with an airflow meter, so how does the Respons do it?" We've all heard the stories and seen people get shot down on forums when they ask about BOVs. Common responses are "your car will stall, backfire, run rich, go slower, or rip a hole in the space-time continuum that will bring about the end of the universe". Certainly, if the BOV is not designed or adjusted correctly, at least some of these may be true. When you vent a BOV to atmosphere, you're letting air out of the system that has been measured by the airflow meter, so the ECU will continue to inject fuel for that missing air, hence the issues with over-fuelling that can occur. However, by controlling HOW MUCH the valve vents, WHEN it vents, and for HOW LONG, the Respons can be configured to vent a portion of air to atmosphere at a time and of a volume that least affects the fuelling, to the point where there are no negative side-effects. GFB says that since its competitors do not have a means for adjusting the amount of air that is vented to atmosphere, they are unable to achieve the same success that a Respons does on even the most sensitive engines.
Features
Performance AND sound without compromise:
- Adjust the volume of your blow-off sound, from 100% recirc to 100% atmosphere and anywhere in between
- Up to 30% faster boost recovery on gearshift, with GFB's TMS principle
- Get the blow off sound without the hassles, even on sensitive MAF-based systems
- Hold unlimited boost pressure: a GFB valve CANNOT be forced open by high boost
- Better throttle response
- Available in a huge range of universal and direct bolt-on kits; this kit has 2 valves for the Kia Stinger 3.3TT
- GFB pioneered the dual port BOV design in 1999, following up with the patented venting bias adjustment system in 2001. This technology is not just a gimmick: it's the key to getting a blow-off sound without the issues (unlike other valves), and is exclusive to GFB
Installation notes
When GFB says "bolt-on", that's EXACTLY what it means. Everything you need is included, it fits directly in the factory location (not on a separate adaptor), and no modifications to the car are required. We recommend installation by a qualified technician.
Warranty
GFB (Go Fast Bits) gives the original owner a limited lifetime warranty against defective materials or faulty workmanship; register the product on GFB's website to activate it. Contact us with your order number if you need to make a claim.
FAQ
Atmosphere venting BOVs won't work on my car. Will this?
GFB's answer: try a GFB Respons, you'll be surprised. By controlling how much the valve vents, when it vents, and for how long, the Respons can be configured to vent to atmosphere with no negative side-effects, even on a car with a sensitive airflow meter (MAF).
How loud is it?
You choose: recirculate all of the air for silent factory operation, vent it all to atmosphere for maximum noise, or set it anywhere in between.
Will it hold boost on a tuned car?
Yes. A GFB valve cannot be forced open by high boost: its balanced piston design uses boost pressure on either side to cancel out the forces.
Is shipping free?
Yes: FREE SHIPPING.