IN STOCK
Description
Product Description
Highlights:
- UV, temperature, and water-resistant
- Designed to locate in the OEM factory position
- Finished in high quality clear coat to ensure UV-protection and extra durability
Take an already incredible vehicle, pop the bonnet and view the engine with no cover in place, yeah, its bit of an anti-climax. Or maybe you have the stock cover and want something that pops a little bit more with your newest Forge Intakeor Inlet.Our cover fits on the original mounting locations, iswater-resistant, and takes each heat cycle of the engine with ease. Not only that, it'sfinished in high quality clear coat to ensure UV-protection and extra durability.
Manufactured by an autoclave process. This involves the use of up to10BAR of pressurethat is blown into a 100% billet mould to force the material out. This high amount of pressure ensures the carbon fibre is fully in contact with the surface of the mould, therefore, making sure theweave is tight, solid, and strong; this process will also ensure there are no imperfections in the product.
The Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certainapplications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre.Unfortunately, due to this harsh and extreme environment, your Forge carbon fibreis not warrantied for that eventuality. All other aspects of your carbon fibre products are covered by ourwarranty process.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this productWant to leave a review?
Login Register FREE!
Compatible Vehicles
Tags
ToyotaWarranty
Warranty Infomation
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Shipping
Shipping
USA Deliveries
All Deliveries are sent via Fedex. We cannot guarantee delivery timelines as all orders are up to shipper schedules and routes.Delivery fee is a Flat Rate of $20 fo all orders over $20. Orders below that value are costed out based on weight. Signature required may be added to your package. Orders can not be re-directed, held, or re-scheduled.
Shipping outside of the Lower 48-Duty Charge Information
All Forge products aresold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process.
Our shipping methodsensuresafe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.comemail address if you require any more information. We reserve the right to change the delivery service and company at any time.
***Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.
Highlights:
- UV, temperature, and water-resistant
- Designed to locate in the OEM factory position
- Finished in high quality clear coat to ensure UV-protection and extra durability
Take an already incredible vehicle, pop the bonnet and view the engine with no cover in place, yeah, its bit of an anti-climax. Or maybe you have the stock cover and want something that pops a little bit more with your newest Forge Intake or Inlet. Our cover fits on the original mounting locations, is water-resistant, and takes each heat cycle of the engine with ease. Not only that, it's finished in high quality clear coat to ensure UV-protection and extra durability.
Manufactured by an autoclave process. This involves the use of up to 10BAR of pressure that is blown into a 100% billet mould to force the material out. This high amount of pressure ensures the carbon fibre is fully in contact with the surface of the mould, therefore, making sure the weave is tight, solid, and strong; this process will also ensure there are no imperfections in the product.
The Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certain applications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre. Unfortunately, due to this harsh and extreme environment, your Forge carbon fibre is not warrantied for that eventuality. All other aspects of your carbon fibre products are covered by our warranty process.