ON ORDER
Please note: The factory wheel studs must be replaced with the longer studs supplied, which press into the hub. Before ordering, check the knurl diameter of your original wheel studs on both axles against the 14.9 mm knurl of the supplied studs; Eibach asks for other knurl sizes to be specified when ordering, so if yours differ, contact us before ordering.
Fits: Hyundai Genesis Coupe (BK) 2.0L Turbo, 2009-2014, and 3.8L V6, 2009-2016; Kia Optima (TF), 2011-2015; Kia Optima 2.0L Turbo (JF), 2017-2020 (Eibach application list). Eibach also lists this part for the 2006-2015 Mazda MX-5 Miata (NC) and the 2014-2018 Mazda 3.
What this is
A pair of Eibach Pro-Spacer 20 mm hub-centric wheel spacers, supplied with longer replacement wheel studs. Each spacer moves its wheel 20 mm outward, widening the track and improving the stance, and lets you fine-tune wheel and tire fitment.
Eibach also lists 10 mm and 15 mm versions for these cars; 20 mm pushes the wheels out furthest, so measure your fender clearance carefully before choosing it.

Design
The spacers are hub-centric for a precise fit and wheel balance, and are made from high-strength aircraft aluminum alloy, which is lighter than steel spacers. A corrosion-protection coating is salt-spray tested to DIN 50021. The longer replacement wheel studs have a 14.9 mm knurl diameter.
Features
- 20 mm thick, sold as a pair (one axle)
- Bolt pattern 5x114.3, centre bore 67.00 mm, thread M12x1.5
- Hub-centric design for precise fit and wheel balance
- High-strength aircraft aluminum alloy, lighter than steel spacers
- Longer replacement wheel studs included (14.9 mm knurl diameter)
- Corrosion-protection coating, salt-spray tested to DIN 50021
- Eibach five-year warranty against factory defects in material and workmanship (coatings excluded)

Installation notes
Fitting means swapping the factory wheel studs for the longer studs supplied, which press into the hub, so it is a job for someone comfortable with that work. To choose a thickness, Eibach's method is to hold a straight edge against the fender at the point of least clearance, measure from the outermost part of the wheel or tire to the straight edge, and pick a spacer slightly thinner than that measurement. Sold as a pair; order two pairs for all four wheels.
On the Kia Optima, Eibach lists only the 2011-2015 TF and the 2017-2020 2.0L Turbo JF, not the 2016 or non-turbo JF Optima. Not listed for the Hyundai IONIQ 5, Kia EV6 or Genesis GV60 (the 10 mm kit is), any Hyundai Veloster (including Veloster Turbo and Veloster N), the Hyundai Genesis sedan, the Genesis G70, the Kia Stinger or the Kia K5. Send us your VIN if you would like it confirmed before you order.
Warranty
Eibach five-year warranty against factory defects in material and workmanship (coatings excluded).
FAQ
Which cars does it fit?
Hyundai Genesis Coupe (BK) 2.0L Turbo 2009-2014 and 3.8L V6 2009-2016, Kia Optima (TF) 2011-2015 and Kia Optima 2.0L Turbo (JF) 2017-2020, per Eibach's application list. Eibach also lists it for the 2006-2015 Mazda MX-5 Miata (NC) and the 2014-2018 Mazda 3.
Do I need new wheel studs?
Yes. The factory studs must be replaced with the longer studs supplied, which press into the hub. Check the knurl diameter of your original studs on both axles against the 14.9 mm knurl of the supplied studs, and contact us before ordering if yours differ.
How many pairs do I need for four wheels?
It is sold as a pair (one axle), so order two pairs for all four wheels.
Is shipping free?
FREE shipping on orders over $400 CAD.