MBRP

Elantra N Cat-Back System [OEM Valve] CF Tips

  • Sale
  • Regular price $1,879.99 CAD
Shipping calculated at checkout.


Contact us for current availability and lead time

Fits: Hyundai Elantra N. MBRP lists this system for the 2022-2026 Hyundai Elantra N, 2.0L turbo engine only.

What this is

MBRP's 3-inch cat-back exhaust for the Hyundai Elantra N, with a dual rear exit and carbon fibre tips. It is an Active Profile system that works with the factory exhaust valve actuator: MBRP's installation instructions move the OEM valve actuator, drive spring and flange nuts onto the MBRP passenger-side tail pipe. MBRP sums up Active Profile as "Freedom of choice."

MBRP 3 inch cat-back exhaust for the Hyundai Elantra N laid out: front pipe, mid-pipe, Y-pipe and dual tail pipes with carbon fibre tips

Design

An ARMOR Pro system in T304 stainless steel with 3-inch tubing, running from the catalytic converter back to a dual rear exit. It comes in sections (front pipe, mid-pipe, Y-pipe, and driver-side and passenger-side tail pipes) joined with 3.0" band clamps, and the passenger-side tail pipe carries the spring hub for the factory valve actuator. The tips are dual wall and angle cut with a 5-inch outlet: an outer wall of carbon fibre over an inner sleeve of mirror-polished T304 stainless steel.

Features

  • 3-inch cat-back with a dual rear exit
  • Active Profile: works with the factory exhaust valve actuator
  • ARMOR Pro: T304 stainless steel
  • Carbon fibre tips: dual wall, angle cut, 5-inch outlet, with an inner sleeve of mirror-polished T304 stainless steel
  • Reuses the factory front pipe nuts, catalytic converter gasket and rubber insulators

MBRP cat-back exhaust installed under the car, showing the Y-pipe joint and band clamps

Installation notes

MBRP's instructions have you unplug the exhaust valve actuator on the passenger side, remove the factory system and take the valve actuator off it. The front pipe bolts to the catalytic converter with the factory nuts, keeping the factory gasket, and the factory rubber insulators are reused. The factory flange nuts, drive spring and actuator go onto the MBRP passenger-side tail pipe with the valve open, and the actuator is plugged back in at the end. Band clamps take approximately 45 lb-ft (60 N-m) of torque; MBRP asks you to verify clearances, system security and band clamp torque after 30-60 miles (50-100 km) of driving. We recommend installation by a qualified technician.

Warranty

Your MBRP product is backed with an industry-leading warranty, covering defects in the materials or workmanship under normal use and service. If any component(s) of your system does not meet MBRP's warranty standards, you're covered: the failed component will be repaired or replaced. MBRP's Limited Warranty for each product is based on a number of factors including material grade, intended use and vehicle type, and MBRP shows the warranty that applies to each product as a badge on its product pages. Contact us with your order number if you need to make a claim.

FAQ

Does it work with the factory exhaust valve?

Yes. MBRP's installation instructions move the factory valve actuator, drive spring and flange nuts onto the MBRP passenger-side tail pipe, which has the spring hub for it.

Which Elantra N does it fit?

MBRP lists it for the 2022-2026 Hyundai Elantra N with the 2.0L turbo engine.

What tips does it have?

Carbon fibre tips, dual wall and angle cut with a 5-inch outlet, over an inner sleeve of mirror-polished T304 stainless steel.


Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jake

Sounds amazing