ON ORDER
Note for North American buyers: the i30 N was never sold in Canada or the United States. The Veloster N is the closest car offered here, and it does not take this intercooler.
Fits: Hyundai i30 N, Mk3 2017-2020 (including the i30 Fastback N), pre-facelift only. This is the only application Forge lists for this cooler, and Forge's Q&A on the product page describes it as the pre-facelift 2018-2020 car. Forge states no gearbox restriction for this part.
What this is
Forge Motorsport's cooler swaps the factory front-mount intercooler on the pre-facelift Mk3 i30 N for a much larger bar-and-plate core. Forge quotes over 129% more core volume and over 71% more frontal area than the original, fed by high-flow cast end tanks with an internal divider on the turbo side so air is spread across the full stepped core.

Design
The kit addresses the plumbing as well: the inlet and outlet are opened up to 65mm, and a 64mm hot-side hard pipe takes the place of the 50mm factory item. A fabricated duct channels air through the core, and both the cooler and the boost pipe are finished in black textured powder coat. This is the pre-facelift part only; the Mk3.5 facelift car takes a different Forge intercooler.
Features
- Bar-and-plate core construction, not tube-and-fin
- Forge quotes over 129% more core volume and over 71% more frontal surface area than the stock cooler
- High-flow cast end tanks, with an internal divider on the turbo side so the full stepped core is used
- Fabricated ducting system integrated into the design to route air through the core
- Inlet and outlet enlarged to 65mm, which Forge rates at 27% more volume than stock
- Includes a custom 64mm hot-side hard pipe in place of the 50mm factory pipe
- Black textured powder-coat finish on both the intercooler and the boost pipe
- Forge's own dyno testing recorded 24 C intake temperature against 48 C on the factory cooler

Installation notes
The intercooler replaces the factory front-mount intercooler, and the included 64mm hot-side hard pipe takes the place of the 50mm factory pipe. This is the pre-facelift Mk3 part only. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.

Warranty
Forge Motorsport gives the original purchaser a limited lifetime warranty against manufacturing defects. The cover is not transferable, the finish is not covered, and incorrect installation, modification or acidic cleaners void it. Contact us with your order number if you need to make a claim.
FAQ
Does it fit the facelift i30 N or the Veloster N?
No. This is the pre-facelift Mk3 part only and does not fit the Mk3.5 facelift i30 N from 2021 on, which Forge covers with a separate part, nor does it fit the Veloster N, i20 N or Elantra N.
How much cooler does it run?
Forge's own dyno testing recorded 24 C intake temperature against 48 C on the factory cooler.
Is the hot-side pipe included?
Yes. The kit includes a custom 64mm hot-side hard pipe in place of the 50mm factory pipe.
Is shipping free?
FREE shipping on orders over $400 CAD (within Canada Only).