K&N Filters

K&N Cold Air Intake - Kia K5

  • Sale
  • Regular price $582.51 CAD
Shipping calculated at checkout.


ON ORDER: available to order in

Fits: 2021-24 Kia K5 with the 1.6L turbo (L4-1.6L Turbo), per K&N's installation sheet, which also lists the 2020-23 Hyundai Sonata 1.6L turbo. Fitment per the Marcor Automotive catalogue: Kia K5.

What this is

K&N cold air intake system for the Kia K5. It replaces the factory intake tube and air filter housing with a K&N intake tube, a heat shield and a K&N air filter. K&N lists it for the 1.6L turbo engine.

On K&N's dyno, a 2021 Kia K5 1.6L turbo gained 9.42 hp at 4830 rpm and 24.99 lb-ft at 2441 rpm with this intake. K&N notes that gains are based on a specific or similar vehicle test and that results will vary.

K&N cold air intake kit for the Kia K5 1.6L turbo, with grey intake tube, black heat shield and red cone air filter

Design

A 3 in OD, 17 in long intake tube connects to the turbo inlet through a hump coupler (3 in to 3.25 in ID) and to the factory mass air sensor through a straight coupler (3.125 in to 3 in ID). The mass air sensor moves from the factory air filter housing onto the K&N heat shield, and the K&N air filter clamps onto the sensor. The heat shield is finished with edge trim and locates on a supplied mounting stud that fits the factory mounting grommet. A vent fitting in the tube takes the factory vent line, and the BOV hose connects to the K&N tube.

Features

  • K&N dyno result on a 2021 Kia K5 1.6L turbo: +9.42 hp @ 4830 rpm and +24.99 lb-ft @ 2441 rpm (results will vary)
  • 3 in OD x 17 in long intake tube
  • Heat shield with edge trim; the factory mass air sensor mounts to it
  • K&N air filter
  • Hump coupler and straight coupler, hose clamps and mounting hardware included
  • Vent fitting for the factory vent line
  • Filter cleaning every 100,000 miles, more often in dusty or off-road use, with a visual check every 25,000 miles

Installation notes

Following K&N's installation sheet, the fresh air intake duct, the factory intake tube and the air filter housing come out, the O-ring seal comes off the mass air sensor and the sensor moves to the K&N heat shield, and the fresh air intake duct goes back in at the end. Tools needed: flat blade screwdriver, ratchet, extension, 10mm socket, cutters, pliers, 10mm wrench, 9/16 in wrench and 4mm Allen key. K&N says its intake systems should be checked periodically for alignment, clearance and tight connections, and that failure to follow the instructions or proper maintenance may void the warranty. To clean and re-oil the filter, use K&N's Recharger service kit. We recommend installation by a qualified technician.

Warranty

K&N gives its No-Hassle Lifetime Limited Warranty on its air intakes: it lasts for the lifetime of the product and covers the original purchaser only, and it is not transferable. Damage from racing, competition or any off-road use is not covered. Contact us with your order number if you need to make a claim.

FAQ

Which K5 does it fit?

K&N lists the 2021-24 Kia K5 with the 1.6L turbo engine, and the 2020-23 Hyundai Sonata 1.6L turbo.

How much power does it add?

On K&N's dyno, a 2021 K5 1.6L turbo gained 9.42 hp at 4830 rpm and 24.99 lb-ft at 2441 rpm. K&N notes that results will vary.

How often does the filter need cleaning?

K&N calls for cleaning every 100,000 miles, more often in dusty or off-road use, and a visual check every 25,000 miles. The Recharger service kit is used to clean and re-oil the filter.

Is it in stock?

It is on order and available to order in.



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)