ON ORDER
Fits: 2010-2012 Hyundai Genesis Coupe 3.8L V6, left or right side, one converter per side, as a cut-and-weld universal converter, plus select other Hyundai and Kia models listed below. It does not fit the 2.0T Genesis Coupe, the 2013-2016 Genesis Coupe or the Veloster Turbo.
Fitment (MagnaFlow application list): Hyundai Genesis Coupe 2010-2012 with the 3.8L V6, left or right side, one converter per side (EFN 2010 AHYXV03.8KW5, 2011 BHYXV03.8KW5 and 2012 CHYXV03.8KW5). Other Hyundai models MagnaFlow lists: Accent 1.6L (2012-2017); Elantra 2.0L (2004-2006, except PZEV); Equus 4.6L V8 (2011, left or right side); Equus 5.0L V8 (2012-2016, left or right side); Genesis sedan 4.6L V8 (2009-2012, left or right side); Genesis sedan 5.0L V8 (2012-2014, left or right side); Sonata 2.4L (2006); Sonata 3.3L V6 (2009-2010); Tiburon 2.0L (2007-2008); Tucson 2.0L (2009); Veloster 1.6L (2012-2017, non-turbo). Kia models MagnaFlow lists: K900 5.0L V8 (2015-2017, rear); Optima 2.4L (2006); Optima 2.7L V6 (2006-2010); Rio 1.6L (2012-2017); Rondo 2.7L V6 (2007-2010); Sorento 3.3L V6 (2016-2017, with Sport Package); Soul 1.6L (2012-2017, non-turbo); Spectra 2.0L (2008-2009, manual transmission); Spectra5 2.0L (2008-2009, manual transmission). MagnaFlow ties every one of these to a specific engine family number (EFN), shown on the car's emissions label, and its list also covers vehicles from other makes.
What this is
This MagnaFlow converter is a California Grade, CARB compliant universal catalytic converter that MagnaFlow lists for the left or right converter on the 2010-2012 Hyundai Genesis Coupe 3.8 V6, and for a range of other Hyundai and Kia models. It is a cut-and-weld part: it is welded into the existing exhaust rather than bolted in.
It suits a shop, or an owner working with one, that is set up to cut and weld a universal converter into the exhaust. If you have a 2010-2012 3.8 V6 Genesis Coupe and want a bolt-in part, MagnaFlow's direct-fit converter is the simpler choice.

Design
Stainless steel construction that is highly resistant to corrosion, with a single laser fusion weld that greatly reduces the possibility of a leak. The compact, low-mass design gives greater thermal efficiency. It is a universal design that allows it to fit a wide array of vehicles.
Features
- California Grade, CARB compliant (CARB Executive Order D-193-175)
- Universal design that allows it to fit a wide array of vehicles
- Stainless steel construction, highly resistant to corrosion
- Single laser fusion weld that greatly reduces the possibility of a leak
- Compact, low-mass design for greater thermal efficiency
- Cut-and-weld installation: MagnaFlow states it requires cutting and welding, and professional assistance
Installation notes
This is not a bolt-in part: MagnaFlow states that it requires cutting and welding and that professional assistance is required. Each converter covers one position, so a car listed for the left and right side needs two to replace both. It does not fit the 2.0T Genesis Coupe, the 2013-2016 Genesis Coupe or the Veloster Turbo (MagnaFlow lists only the non-turbo Veloster). MagnaFlow states that a catalytic converter does not fail on its own, so find and fix the root cause before fitting a new one (MagnaFlow recommends professional diagnosis). We recommend installation by a qualified technician.
Emissions: MagnaFlow classes it as California Grade, CARB compliant (CARB Executive Order D-193-175) and describes it as legal for sale in all 50 US states, including California, Colorado, New York and Maine, for the listed vehicles. The Executive Order is not an endorsement or approval of any emission reduction claims for this converter; it is only a finding that the converter is exempt from the prohibitions in California Vehicle Code sections 27156 and 38391. These are US rules, not Canadian ones: check the emissions rules for your province before you order. Send us your VIN if you would like it confirmed before you order.
Warranty
MagnaFlow gives a limited warranty on its CARB catalytic converters to the original purchaser: 5 years/50,000 miles on construction and 5 years/50,000 miles on emissions. MagnaFlow asks for proof of purchase and the warranty certificate, signed by the installer and the owner, with any claim. Contact us with your order number if you need to make a claim.
FAQ
Is this a bolt-in converter?
No. It is a cut-and-weld universal part. MagnaFlow states that it requires cutting and welding and that professional assistance is required. For a 2010-2012 3.8 V6 Genesis Coupe, MagnaFlow's direct-fit converter is the simpler choice.
Will it fit the Veloster Turbo or the 2.0T Genesis Coupe?
No. It does not fit the 2.0T Genesis Coupe, the 2013-2016 Genesis Coupe or the Veloster Turbo; MagnaFlow lists only the non-turbo Veloster.
How many do I need?
Each converter covers one position, so a car listed for the left and right side needs two to replace both.
Is shipping free?
FREE shipping on orders over $400 CAD.