IN STOCK
Fits: Kia Stinger: listed by MBRP against the 2018-2021 Kia Stinger GT 3.3L, as a quad carbon fibre bezel kit.
What this is
MBRP dual wall, angle cut exhaust tip with a 4 inch outlet, carbon fibre, sold as a quad bezel kit for the Kia Stinger GT 3.3L: four tips, each on its own mounting bracket, that take the place of the factory exhaust bezels in the rear fascia.

Design
Each tip has an outer wall of carbon fibre over an inner sleeve of mirror-polished T304 stainless steel, with an angle-cut end, a 2.5-inch inlet, a 4-inch outlet and a 4-inch length. Each tip sits on a mounting bracket that bolts into a fascia opening and is held by a clamp. The bracket attachments are slotted, so each tip can be centred in its opening. MBRP lists the tips as handmade.
Features
- Quad carbon fibre bezel kit for the 2018-2021 Kia Stinger GT 3.3L
- Dual wall: carbon fibre outer wall over a mirror-polished T304 stainless steel inner sleeve
- Angle cut, 4-inch outlet, 2.5-inch inlet, 4-inch tip length
- Slotted mounting brackets for fine adjustment in the fascia openings
- In the kit, per MBRP's instructions: 4 tips, 4 mounting brackets, 4 M6x20 hex bolts, 4 nuts, 8 M8 washers and 4 lock washers
- 1-year warranty from MBRP
Installation notes
MBRP's instructions start by removing the rear mufflers from their insulators, then the factory exhaust bezels from the fascia: two bolts underneath and two screws at the top. The top screws are very difficult to access, and you may need an offset screwdriver. The clamps then move from the tips onto the mounting brackets (outside clamps with the bolt hex facing outwards, inner clamps with it facing inwards), a bracket goes loosely into each fascia opening with the supplied hardware and the original top screws, and a tip goes onto each bracket and into its clamp. Centre the tips in the fascia openings for the best appearance and clearance, then tighten all mounting hardware, starting with the upper screws. We recommend installation by a qualified technician.
Warranty
MBRP gives a 1-year warranty on this tip kit against defects in workmanship or material; surface rust, penetrating rust and heat discoloration are not covered, and MBRP asks buyers to register the product. Contact us with your order number if you need to make a claim.
FAQ
Is this one tip or a set?
A set. This is MBRP's quad bezel kit: 4 tips with 4 mounting brackets and the mounting hardware.
Which Stinger does it fit?
MBRP lists it for the 2018-2021 Kia Stinger GT 3.3L.
What size are the tips?
Each tip has a 2.5-inch inlet and a 4-inch outlet, is 4 inches long and is angle cut.