Mishimoto

Mishimoto Intercooler Kit, Silver - Kia Stinger

  • Sale
  • Regular price $1,889.00 USD
Shipping calculated at checkout.


ON ORDER: available to order in

Fits: Kia Stinger (fitment per the Marcor Automotive catalogue). Mishimoto lists this kit as a direct fit for the 2018-2023 Kia Stinger GT 3.3T (Lambda II GDI engine); it is not listed for the 2.0T or 2.5T Stinger. It is the silver finish.

What this is

Mishimoto's performance intercooler kit for the Kia Stinger, in the silver finish. It replaces the entire factory intercooling system, from the turbos to the throttle body: a larger intercooler, new hot-side and cold-side piping, a cast aluminum merge manifold and silicone couplers.

Mishimoto calls the Stinger GT's Lambda II GDI 3.3T one of the best platforms out there, but says the factory intercooling system has the potential to hold the Stinger back.

Mishimoto silver performance intercooler kit for the Kia Stinger GT 3.3T, with black piping, cast merge manifold, silicone couplers, brackets and clamps

Design

The factory tube-and-fin core with plastic end tanks is replaced by a bar-and-plate core TIG-welded to cast aluminum end tanks, for better heat dissipation and flow through the core. The core is also bigger: Mishimoto quotes a 94-percent increase in core volume and a 74-percent increase in external fin surface area.

The piping stays aluminum like the factory pipes, but the inner diameter grows to 3 in for more flow with minimal pressure drop. The piping merger manifold is reworked with 2 in inlets and a 3 in outlet, for a 51-percent boost in flow straight out of the turbos, while keeping the stock recirculation valves. The pipes are finished in micro-wrinkle black powder coat and joined with Mishimoto's 5-layer silicone couplers.

Features

  • Direct fit for the 2018-2023 Kia Stinger GT 3.3T (Mishimoto)
  • Replaces the whole intercooling system, turbo to throttle body: intercooler, piping, cast aluminum merge manifold and couplers
  • Bar-and-plate core TIG-welded to cast aluminum end tanks
  • 94-percent increase in intercooler core volume and 74-percent increase in external fin surface area
  • 3 in intercooler piping; merger manifold with 2 in inlets and a 3 in outlet, for a 51-percent increase in flow
  • Mishimoto dyno figures: intercooler outlet temperature down 29F, with max gains of 8 whp and 8 wtq, on the stock tune; down 41F, with an additional 6 whp and 8 wtq, on top of a stage 1 tune
  • Additional bung on the cold-side intercooler pipe that can be drilled and tapped for methanol injection or sensors
  • Compatible with the stock recirculation valves
  • Silver intercooler; piping in micro-wrinkle black powder coat
  • Overall length 38.7 in, height 7.9 in, width 8.1 in; inlet 3 in, outlet 3 in
  • CARB EO# D-759-24
  • In the box: (1) performance intercooler, (1) hot-side piping merger manifold, (1) hot-side intercooler pipe, (1) cold-side intercooler pipe, (6) silicone couplers, (2) application-specific mounting brackets, (2) air diverters, (4) mounting grommets, (8) heavy-duty worm gear clamps and mounting hardware

Installation notes

Mishimoto rates the installation difficulty as medium. Installing this kit requires permanent modification to the front air guide shrouding. We recommend installation by a qualified technician. Contact us before ordering if you have questions about fitment.

Warranty

Mishimoto gives the original purchaser a limited lifetime warranty on its products bought from Mishimoto or an authorized dealer; claims need the original sales receipt, and labour is not covered. Contact us with your order number if you need to make a claim.

FAQ

Will it fit my Stinger?

Mishimoto lists it as a direct fit for the 2018-2023 Kia Stinger GT 3.3T. It is not listed for the 2.0T or 2.5T Stinger.

What does it gain?

On Mishimoto's dyno, intercooler outlet temperature dropped 29F with max gains of 8 whp and 8 wtq on the stock tune, and 41F with an additional 6 whp and 8 wtq on top of a stage 1 tune.

Do I have to modify anything?

Yes. Installing the kit requires permanent modification to the front air guide shrouding.

Does it keep the factory recirculation valves?

Yes. The kit is compatible with the stock recirculation valves.



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)