ProMeth

Water Methanol Injection Pump (20 GPH/1260CC Per Minute @ 190 psi)

  • Sale
  • Regular price $319.99 CAD
  • 2 available
Shipping calculated at checkout.


In Stock

N Day Sale

Fits: Universal water methanol injection pump, a great choice for many single or dual nozzle applications under the 600 horsepower mark; not well suited for direct port applications. ProMeth pump, part number PM75 (20 GPH / 1260CC per minute @ 190 psi).

What this is

This is the industry standard water methanol injection pump, and what most water methanol injection companies are using. It's commonly identified as a 1.0 gallon per minute open flow pump with a 10-11 AMP sticker rating, depending on the pump's factory preset pressure bypass setting of either 200-220 psi.

It's not well suited for direct port applications due to its limited flow/pressure potential. However, it is still a great choice for many single or dual nozzle applications under the 600 horsepower mark.

ProMeth PM75 water methanol injection pump, 20 GPH / 1260cc, black with orange label, seen from the motor end

Design

The pump has a built-in bypass valve, built-in thermal protection, a built-in anti reverse check valve and a built-in heat sink on back of motor, with heavy duty dual EPDM pump seals and a 3/8 NPT female inlet & outlet port. The motor turns 1400 RPM @ 12 volts with an 11 amp draw. Pressure is adjustable from 100-300 PSI, and every pump is tested prior to shipping.

Features

  • Pressure adjustable from 100-300 PSI
  • 3/8 NPT female inlet & outlet port
  • Motor turns 1400 RPM @ 12 volts
  • 11 amp draw
  • Built-in bypass valve
  • Built-in thermal protection
  • Built-in anti reverse check valve
  • Built-in heat sink on back of motor
  • Heavy duty dual EPDM pump seals
  • Can run dry up to 1 hour without damage
  • 100% methanol compatible
  • Tested prior to shipping
  • Made in the USA
  • Weight 5.2 lbs
  • Contents: pump (1)

Flow & Horsepower Ratings @ 13.5 Volts:

  • 1.1 gallons per minute open flow
  • 75 liters per hour @ 190 PSI
  • 20 gallons per hour @ 190 PSI
  • 1260 cubic centimeters @ 190 PSI
  • Supports up to 1200-1400 horsepower: 100% water mix
  • Supports up to 700-900 horsepower: 50/50 water methanol mix
  • Supports up to 500-600 horsepower: 100% methanol mix

ProMeth PM75 water methanol injection pump, showing the pump head with its inlet and outlet ports

Installation notes

  • Do not use with petroleum products (E85, E98, gasoline, diesel, etc).
  • Use 12 gauge wire for power and ground.
  • Does not include pump fittings. Pump fittings are available for sale separately.
  • Pumps come preset at 200 PSI.
  • Expect 4-5 years of service if pump pressure is left at 200 PSI or below.
  • Running the pump over 250 PSI is not advised and will shorten the pump's life.
  • All tests were performed using a 6AN stainless steel braided hose on the inlet side of the pump.
  • Using 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output.
  • Pump may be mounted vertical or horizontal.

We recommend installation by a qualified technician.

Warranty

Contact us with your order number if you have any problem with your part.

FAQ

Can I use it for direct port injection?

It's not well suited for direct port applications due to its limited flow/pressure potential. It is a great choice for many single or dual nozzle applications under the 600 horsepower mark.

What pressure does it come set at?

Pumps come preset at 200 PSI, and pressure is adjustable from 100-300 PSI. Expect 4-5 years of service if pump pressure is left at 200 PSI or below; running the pump over 250 PSI is not advised.

Are pump fittings included?

No. Pump fittings are available for sale separately.

Can I run E85 or gasoline through it?

No. Do not use with petroleum products (E85, E98, gasoline, diesel, etc).



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)