IN STOCK
AFTERMARKET SHOCK FITMENT: if you have changed out your OEM shocks with aftermarket shocks or coilovers, the mounting location may have moved. Please check the distance between the swaybar and the shock mount, and confirm that it is between 11.4" to 12.9". If it does not fall within this range, please call or email us with the distance required to find you the proper part. SPL cannot confirm fitment with aftermarket shocks and coilovers.
Fits: Confirmed applications: 2019+ Hyundai Veloster N (JSN), 2022+ Hyundai Elantra N (CN7), 2022+ Hyundai Kona N (OSN), 2017+ Hyundai Elantra Sport, 2020+ Kia Forte GT K3 and 2019+ Hyundai Veloster Turbo (JS). With aftermarket shocks or coilovers, see the note above. SPL's own page lists it for the 2019+ Hyundai Veloster N (JSN) and 2022+ Hyundai Elantra N (CN7).
What this is
SPL front adjustable swaybar endlinks for the Hyundai Veloster N / Elantra N feature massive PTFE-lined FK 1/2" bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. They are completely adjustable for track or street applications.
Unlike OEM, SPL endlinks are adjustable, enabling you to eliminate unwanted preload on the sway bars, set the ideal bar angle, and, if equipped with ride-height adjustable coilovers, properly corner balance your car. The result is better handling, more sway bar tuning options, and less variation in performance between right-hand and left-hand turns. Even stock cars can take advantage of this upgrade by simply dialing out the swaybar preload that occurs when you sit in the car to drive it. Tested, developed, and used on the GenRacer Hyundai TC America race team's winning Veloster N and Elantra N.

Design
Each link is a 6061-T6 aluminum turnbuckle (anodized black) with FK PTFE-lined 65° studded rod ends (F1 spec, self-cleaning). Custom heat-treated chromoly high-misalignment studs allow for extreme articulation angles (up to 65°) to prevent endlink bind when used with adjustable sway bars. The turnbuckles use opposing thread patterns (RH and LH), so the length can be adjusted while the link is still installed.
Features
- Large adjustability range
- Eliminates swaybar preload
- Correct swaybar install angle
- Lightweight, high strength construction
- Maintenance-free, US made, PTFE-lined FK bearings
- Massive PTFE-lined FK 1/2" bearings for the highest load capacity with stiffer aftermarket sway bars
- Custom heat-treated chromoly high-misalignment studs for articulation angles up to 65°
- 6061-T6 aluminum turnbuckle (anodized black)
- FK PTFE-lined 65° studded rod ends (F1 spec, self-cleaning)
- Suitable for all uses, from daily driver to race car
- Sold as a pair

Installation notes
Easy, on-car adjustments: the 6061-T6 turnbuckles use opposing thread patterns (RH and LH) to allow you to adjust the length while it is still installed. Simply turn the turnbuckle to lengthen or shorten the link to the exact desired length and snug the jam nuts.
If you run aftermarket shocks or coilovers, check the swaybar to shock mount distance first (see the note at the top of this page). SPL's installation instructions: SPL Parts Front Endlinks. We recommend installation by a qualified technician.

Warranty
SPL Parts warrants its suspension parts against defects in material and workmanship for two years from the date of purchase. Proof of purchase is required, and competition use is not covered. Contact us with your order number if you need to make a claim.
FAQ
Are these worth it on a stock car?
Even stock cars can take advantage of this upgrade by simply dialing out the swaybar preload that occurs when you sit in the car to drive it.
Will they fit with aftermarket shocks or coilovers?
The mounting location may have moved. Check that the distance between the swaybar and the shock mount is between 11.4" to 12.9". If it is not, call or email us with the distance required to find you the proper part. SPL cannot confirm fitment with aftermarket shocks and coilovers.
How do I adjust them?
Turn the turnbuckle to lengthen or shorten the link to the exact desired length, then snug the jam nuts. You can do this while the link is still installed.