STILLEN

STILLEN Hi-Flow Air Intake Kit, Oiled Filters - Kia Stinger 3.3T Twin Turbo 2018-2023

  • Sale
  • Regular price $658.99 CAD
Shipping calculated at checkout.


ON ORDER

Fits: Kia Stinger with the 3.3L twin-turbo V6, 2018-2023, rear-wheel drive and all-wheel drive (STILLEN application list). STILLEN lists this kit for the 3.3L twin turbo only; it is not listed for the 2.0T or 2.5T Stinger.

What this is

A twin air intake for the Stinger's 3.3L twin-turbo V6. It replaces both factory air boxes and paper filters with two mandrel-bent aluminum intake tubes, two washable oiled-cotton filters and STILLEN's moulded urethane heat shields, which close the filters off from engine-bay heat.

STILLEN's Dynojet testing showed its largest gains of 25 hp at 5,000 rpm and 31 lb-ft at 3,800 rpm at the wheels (STILLEN's figures; results vary). This is the oiled-filter version. STILLEN says the kit increases intake sound.

STILLEN twin Hi-Flow air intake kit for the Kia Stinger 3.3T, showing the aluminum tubes, red oiled filters and black heat shields

Design

The kit uses two mandrel-bent aluminum intake tubes with a black finish, two silicone couplers, two filter mounting brackets and four urethane heat shields. The heat shields close the filters off from engine-bay heat.

Features

  • Two mandrel-bent aluminum intake tubes, black finish
  • Two washable, reusable oiled-cotton air filters with clamps
  • Four urethane heat shields
  • Two silicone couplers, two filter mounting brackets and hardware
  • Replaces the factory air boxes and paper filters
  • STILLEN dyno: gains of up to 25 hp and 31 lb-ft at the wheels (results vary)
  • Fits with hand tools; the factory strut tower braces are removed and refitted
  • Replacement filters: the kit uses two

STILLEN twin air intake installed in the engine bay of a white Kia Stinger 3.3T

Installation notes

There is no cutting or welding: both factory air boxes come out, the two air ducts on the front core support are unbolted during fitting, the brackets and heat shields mount with the car's original fasteners, and one small factory hose on the driver's side is turned end for end. The kit fits with hand tools; the factory strut tower braces are removed and refitted. STILLEN marks this intake as not for sale in California. The dry-filter version is listed separately. We recommend installation by a qualified technician.

STILLEN intake heat shield and filter installed in the Kia Stinger engine bay, side view

Warranty

STILLEN covers its intakes for the original purchaser for as long as they own the vehicle; STILLEN defines lifetime as a maximum of 7 years. Contact us with your order number if you need to make a claim.

FAQ

Which Stinger does it fit?

The Kia Stinger with the 3.3L twin-turbo V6, 2018-2023, rear-wheel drive and all-wheel drive. It is not listed for the 2.0T or 2.5T Stinger.

Is this the oiled or the dry filter version?

This is the oiled-filter version. The dry-filter version is listed separately.

How much power does it add?

STILLEN's Dynojet testing showed its largest gains of 25 hp at 5,000 rpm and 31 lb-ft at 3,800 rpm at the wheels (STILLEN's figures; results vary).

Which replacement filters do I need?

The kit uses two.

Is shipping free?

FREE shipping on orders over $400 CAD.



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)