Contact us for current availability and lead time
Fits: Universal. Snow Performance water-methanol systems plumbed with 1/4-inch nylon tubing.
What this is
A Snow Performance quick-connect union T for 1/4-inch nylon lines. It splits one line into two: to add a second nozzle (dual injection) on a controller with a single output, or to add a secondary tank in the trunk.

Design
A union T with three quick-connect ports, each taking 1/4-inch OD nylon tube. One port takes the main feed from the pump or solenoid and the other two feed the two branches.
Features
- Ports: three, each for 1/4-inch OD nylon tube
- Type: quick-connect union T
- Adds a second nozzle (dual injection) on a controller with a single output, or a secondary tank in the trunk
Installation notes
From Snow Performance's instructions: place the T where the tubing will not bend sharply or kink, cut the tubing square with a sharp utility knife, and connect the T's remaining port to the main feed from the pump or solenoid.
Warranty
Snow Performance gives the original purchaser a 1-year limited warranty against defects in workmanship and material on its water-methanol kits and parts, starting from the original purchase date. Proof of purchase is required. Contact us with your order number if you need to make a claim.
FAQ
Where should the T go?
Snow Performance's instructions: place it where the tubing will not bend sharply or kink, cut the tubing square with a sharp utility knife, and connect the T's remaining port to the main feed from the pump or solenoid.
Does it work with braided line?
No. For 4AN braided systems use the 4AN T fitting. Nylon tubing is sold as 20 ft high-temp nylon tubing.