In Stock
DO NOT use with Snow or AEM progressive controller. Amperage on this pump is too high.
Fits: Universal water methanol injection pump; not for use with a Snow or AEM progressive controller. ProMeth pump, part number PM190 (50 GPH / 3150CC per minute).
What this is
A ProMeth water methanol injection pump rated at 50 gallons per hour, 190 liters per hour or 3150 cubic centimeters @ 180 PSI (ratings @ 13.5 volts), with 1.7 gallons per minute open flow. Pressure is adjustable from 100-300 PSI, it is 100% methanol compatible, and it is made in the USA and tested prior to shipping.

Design
The pump has a built-in bypass valve, built-in thermal protection, a built-in anti reverse check valve and a built-in heat sink on back of motor, with heavy duty dual EPDM pump seals and a 3/8 NPT female inlet & outlet port. The motor turns 2200 RPM @ 12 volts with a 16.5 amperage draw, and the pump can run dry up to 1 hour without damage.
Features
- Pressure adjustable from 100-300 PSI
- 3/8 NPT female inlet & outlet port
- Motor turns 2200 RPM @ 12 volts
- 16.5 amperage draw
- Built-in bypass valve
- Built-in thermal protection
- Built-in anti reverse check valve
- Built-in heat sink on back of motor
- Heavy duty dual EPDM pump seals
- Can run dry up to 1 hour without damage
- 100% methanol compatible
- Tested prior to shipping
- Made in the USA
- Weight 6.2 lbs
- Contents: pump (1)
Flow & Horsepower Ratings @ 13.5 Volts:
- 1.7 gallons per minute open flow
- 190 liters per hour @ 180 PSI
- 50 gallons per hour @ 180 PSI
- 3150 cubic centimeters @ 180 PSI
- Supports up to 2500-4500 horsepower: 100% water mix
- Supports up to 1500-1900 horsepower: 50/50 water methanol mix
- Supports up to 1200-1600 horsepower: 100% methanol mix

Installation notes
- DO NOT use with Snow or AEM progressive controller. Amperage on this pump is too high.
- Do not use with petroleum products (E85, E98, gasoline, diesel, etc).
- Use 12 gauge wire for power and ground.
- Does not include pump fittings. Pump fittings are available for sale separately.
- Pumps come preset at 220 PSI.
- Expect 4-5 years of service if pump pressure is left at 220 PSI or below.
- Running the pump over 250 PSI is not advised and will shorten the pump's life.
- All tests were performed using a 6AN stainless steel braided hose on the inlet side of the pump.
- Using 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output.
- Pump may be mounted vertical or horizontal.
We recommend installation by a qualified technician.
Warranty
Contact us with your order number if you have any problem with your part.
FAQ
Can I use it with a Snow or AEM progressive controller?
No. Amperage on this pump is too high for a Snow or AEM progressive controller.
How much does it flow?
1.7 gallons per minute open flow, and 190 liters per hour, 50 gallons per hour or 3150 cubic centimeters @ 180 PSI (ratings @ 13.5 volts).
What pressure does it come set at?
Pumps come preset at 220 PSI, and pressure is adjustable from 100-300 PSI. Expect 4-5 years of service if pump pressure is left at 220 PSI or below; running the pump over 250 PSI is not advised.
Are pump fittings included?
No. Pump fittings are available for sale separately.