IN STOCK: SHIPS WITHIN 24 HOURS
Fits: Hyundai Elantra Sport, Hyundai Elantra GT Sport, Hyundai Elantra GT N Line, Hyundai Veloster Turbo 2, Hyundai Veloster N, Hyundai Kona, Kia Forte GT and Kia Forte5. May fit other fully independent suspension KDM vehicles. Whiteline lists these springs for the Hyundai Elantra SR and Veloster N 2017+ on its US site and for the Hyundai i30 N, Kona and Veloster on its Australian site.
What this is
Whiteline performance lowering springs. Whiteline Springs deliver improved vehicle performance whilst maintaining safety and ride quality characteristics. By lowering the vehicle's centre of gravity, the unique and progressive rate coil design not only improves performance but enhances overall appearance.
We recommend these lowering springs over Eibach due to Eibach's very moderate drop. These springs have a more aggressive drop than Eibach, and give you a lower looking vehicle. Add in other Whiteline suspension components and your car will be quickly ready for the track! #gripactivated

Design
The front springs provide a 25mm drop and the rears deliver a desirable 25mm to the vehicle. Whiteline rates the springs at 3.6 kg/mm (202 lb/in) front and 4.0 kg/mm (225 lb/in) rear. They are developed and manufactured in Europe from the highest quality materials and coating, to the finest tolerances, guaranteeing exact fitment, and are engineered for optimal balance with OEM and aftermarket shocks. For total grip activation, match them with a Whiteline Sway Bar and Essentials kit for unrivalled handling and optimal vehicle performance.
Features
- 25mm drop front and rear
- Spring rates (Whiteline): 3.6 kg/mm (202 lb/in) front, 4.0 kg/mm (225 lb/in) rear
- Unique, progressive rate coil design
- More aggressive drop than Eibach, for a lower looking vehicle
- Developed and manufactured in Europe from the highest quality materials and coating
- Made to the finest tolerances, guaranteeing exact fitment
- Engineered for optimal balance with OEM and aftermarket shocks
- Set of 4 springs (Whiteline)

Options
- Add Whiteline Performance Correction Ball Joints: No, Yes (1.6T Chassis 4 Gold Rings) or Yes (2.0T Chassis 3 Gold Rings). No is the springs only. The two Yes options add Whiteline performance correction ball joints, for the 1.6T chassis or the 2.0T chassis.
Installation notes
We at N75 Motorsports highly recommend Whiteline lower ball joints with any lowered vehicle, for the following reason.
What is roll centre, and how does ride height affect it?
Whiteline's motto is "Activate More Grip", and its philosophy is to achieve the maximum amount of usable grip on offer. There are many ways to increase the overall grip available on your car; here the focus is on how to avoid a classic mistake with MacPherson strut suspension and low ride height that can often result in loss of grip.
Many cars in the tuning world run coilover suspension, for example the Whiteline Max-G coilovers, for the benefits they give such as adjustable ride height and damping. Whilst it's very satisfying buying tuning parts such as anti-roll bars or anti-lift kits, sometimes the best result can come from a simple setup change. General wisdom suggests that once you've fitted your coilovers you'll be setting the ride height at a low level to reduce the centre of gravity. Reducing the centre of gravity will theoretically increase the maximum cornering speed of the vehicle, however this is not always the case. And in the case of lowering springs, most performance lowering spring kits that are well developed will take into account a number of factors, one of which is the roll centre location, another of course being ideal spring rate.
So what is important about roll centre and ride height?
The roll centre is a virtual point at which the chassis interacts with the centre of gravity to create weight transfer and roll. This is particularly important with MacPherson strut suspension, because MacPherson strut suspension doesn't have an upper arm; the geometrical equivalent of the upper arm is the top mount. This means the typical roll centre location of a well-designed MacPherson strut suspension is just above ground level. The majority of chassis engineers will seek a roll centre fairly low to ground level, but slightly above it.
"The problem occurs when you lower the MacPherson strut suspension too far."
With a double A-arm or double wishbone suspension, where unequal length arms are used, a chassis designer is able to engineer favourable geometry and camber change throughout the functional range of the suspension travel. Unfortunately, on MacPherson strut suspension the engineer doesn't have this luxury, and the camber change and roll centre change on a MacPherson strut at very high lateral loads can often result in the loss of grip. So what does this have to do with the ride height?
"Eventually the car will 'fall over' onto the outside front wheel."
As you lower your coilover equipped car with MacPherson suspension, the lower control arm will eventually start to point upwards at the outboard end, referencing ground level. What this does in reality is drop the roll centre below ground. The impact this has dynamically, though, is far greater than a static drawing would show.
With the roll centre below ground height, more weight is transferred via the springs (likewise, raising the roll centre reduces weight transfer through the springs and increases weight transfer through sprung mass). This makes body roll more pronounced and in turn increases the leverage against the lower roll centre, making the instantaneous centre move well outside the vehicle, causing even more weight transfer and roll. Eventually the car will "fall over" onto the outside front wheel. The tires' limits of grip will now have been breached, and no more weight transfer can occur. To the driver this is a very frustrating feeling: quite often on a front wheel drive car the rear inside wheel will now be airborne, and the car just understeers relentlessly.
"One solution is to ensure that the strut works in a fairly defined range."
There are numerous ways to address this problem, but here are some common fixes:
- a) Keep the lowering to an optimal level to ensure the ball joint pivot point is not above the centreline from the inboard mounting point.
- b) If you are building a race car, you can move the inboard mounting points upwards or fabricate a ball joint extender.
- c) Use lowering springs instead of coilovers, where the optimal lowering range is achieved.
We recommend installation by a qualified technician.

Warranty
Whiteline covers its springs and ball joints for 3 years or 60,000 km (36,000 miles), whichever comes first, against manufacturing defects in material and workmanship, for the original vehicle they are installed on. Damage from competition, motorsport or off-road use is not covered. Contact us with your order number if you need to make a claim.
FAQ
How much lower will my car sit?
The front springs provide a 25mm drop and the rears a desirable 25mm.
How do they compare with Eibach?
We recommend these over Eibach due to Eibach's very moderate drop. These springs have a more aggressive drop than Eibach and give you a lower looking vehicle.
Do I need the ball joints?
We at N75 Motorsports highly recommend Whiteline lower ball joints with any lowered vehicle: lowering a MacPherson strut car too far drops the roll centre below ground, which can cost grip and cause relentless understeer. The two Yes options add Whiteline performance correction ball joints.
How fast does it ship?
It is in stock and ships within 24 hours.