ON ORDER
Important notes: performance alloy arm, X heavy duty. It induces NVH (noise, vibration and harshness).
Fits: Hyundai i30/i30N and Hyundai Elantra, 2016-on, per Whiteline's install guide; Whiteline lists this mount for Hyundai and Kia. Contact us before ordering if you have questions about fitment.
What this is
Whiteline's complete solid lower engine mount: a billet aluminium torque arm (engine pitch-stop mount) with its own mount, which replaces the factory mount. Whiteline lists it as the Rear Lower Engine Mount to Suit Hyundai and Kia. It is built for high torque and high power output engines and gives a faster, positive, responsive feel of power delivery on and off the throttle.

Design
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The factory torque arm is inherently soft due to its high compliance rubber bushing design and was built for comfort, not responsiveness or feel. Whiteline's billet aluminium torque arm is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology, it eliminates the slop, twisting and shudder found in the OEM rubber bushings, allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Features
- Complete billet aluminium torque arm and mount; performance alloy arm, X heavy duty
- Low compliance bushing technology
- Limits engine and drivetrain movement on the pitch stop
- Eliminates the slop, twisting and shudder of the OEM rubber bushings
- Induces NVH
- Kits Required: 1
- Kit Contents: 1 Torque Arm, 1 Mount, 3 Bolts, 4 Washers, 1 Nut, Install Guide, Grease
- Hardware, per Whiteline's install guide: 2x M10x1.5x25mm bolts, 2x M10 washers, 1x M14x1.5x80mm bolt, 1x M14x1.5 Nyloc nut, 2x M14 washers

Installation notes
Install Guide: Download Here
Whiteline's guide calls this a relatively easy job: there is no need to support the engine, you simply unbolt the OE mount (the front M12 bolt and two rear M10 bolts) and keep the front M12 bolt for re-use. Lightly grease the bushing side faces with the supplied grease, then bolt up the new mount with the supplied hardware; you may have to rock the engine to start the bolts. Tighten the M10 bolts to 40Nm, the OE M12 bolt to 60Nm and the M14 bolt to 70Nm, road test, and re-check the bolts after 100 km. Whiteline lists the installation time as 0.5 hour, with no wheel alignment required. We recommend installation by a qualified technician.

Warranty
Warranty: 3 Year/ 60,000Km's from Whiteline. Contact us with your order number if you need to make a claim.
FAQ
Will it add vibration?
Yes. It is a performance alloy arm, X heavy duty, and it induces NVH.
What is in the kit?
1 torque arm, 1 mount, 3 bolts, 4 washers, 1 nut, the install guide and grease.
Is it hard to install?
Whiteline calls it a relatively easy job: the engine does not need to be supported, and the OE mount simply unbolts. Whiteline lists the installation time as 0.5 hour.